Construction of Warden Residence, Chowkidaar Residence and Compound Wall for Girls Hostel at GDC Paloura Jammu.

Amount

Part-A CIVIL work

Earthwork in all kinds of soil excavation by manual means over areas (Exceeding 30cm and upto 1.5 Mtr in depth, 1.5 M in width as well as 10 sqm on plan) including disposal of excavated earth upto 50 Mtr from cutting edge, disposed earth is to be levelled and neatly dressed all kind of soils.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level in 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate) 40mm nominal size crushed.

Providing and laying in position machine batched, machine mixed and machine vibrated-design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering, finishing and reinforcement, including Admixtures in recommended proportions, (as per IS 91 03) to accelerate, retard setting of concrete improve workability without impairing strength and durability as per direction of Engineer-in-charge-M-20 grade reinforced cement concrete.All work upto plinth level.

Providing and laying in position machine batched, machine mixed and machine vibrated-design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering, finishing and reinforcement, including Admixtures in recommended proportions, (as per IS 91 03) to accelerate, retard setting of concrete improve workability without impairing strength and durability as per direction of Engineer-in-charge-M-20 grade reinforced cement concrete.Beams, plinth beams, girders, bressumers,centilevers, suspended floor lintels roofs and staircases including spiral staircases,shelves etc.

Providing and laying in position cement concrete of 1:3:6 grade (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size) excluding the cost of centering and shuttering. All work upto plinth level.

Providing and laying DPC 50mm thick in 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size crusher aggregate).

Applying a coat of residual petroleum bitumen of grade VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.

Brick work with common burnt clay F.P.S (non modular) bricks of class designation 75 in cement mortar 1:6 (1 cement : 6 fine sand). Foundation and plinth and super structure upto floor V level.

Half brick masonry with bricks of class designation 75 in foundation, plinth and superstructure upto floor V-level in cement mortar 1:4 (1 cement : 4 coarse sand).

Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete TMT bars.

Centering and shuttering including strutting, propping etc. and removal of form work for :-

Foundations, footings, bases of columns.

Suspended floors, roofs, landings, balconies and access platforms.

Columns, pillars, piers, abutments, posts and struts.

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Edges of slabs and breaks in floors and walls upto 20cm wide.

Weather shade, chajjas, corbels etc. including edges.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, lead upto 50Mt & lift upto 1.50M.

Supplying and filling in plinth with fine sand under floors including, watering, ramming consolidating and dressing complete.

15mm cement plaster on the rough side of single or half brick wall of mix in 1:6 (1 cement : 6 fine sand).

12mm cement plaster of mix 1:6 (1 cement : 6 fine sand).

Providing and laying glossy finished full-body vitrified premium quality floor tiles of 60x60cm sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622 of approved make of Somany, Kajaria, Rak make in colours and shade Ethnic-Berlinetta White, Crown White, Dacia White, Dacia Green, Dacia Pink, Dacia Ivory, Dacia Grey, Dacia Brown, Dacia Pearl, Dezzling White, Evalia, S&P Grey, S&P Brown, Ultra White, Haze Grey and Border of Royale- Crown Mint, Crown Pink, Crown Snow, Micra Brown and Radiant- Lawrence Gold, Lawrence Bianco, Lawrence Grigio, Lawernce Moka, Lawrence Jaisalmer, Nuvro Brown, Nuvaro Mocha, Nuvaro Grey, Nauvaro Nero, Nuvaro Crema, Nuvaro Bianco, Nuvaro Beige laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with matching Epoxy etc. complete.

Providing and fixing Ist quality ceramic glazed tiles conforming to IS : 13753 of minimum thickness 5mm of approved make like Rak, SOMANY, KAJARIA or equivalent make in all colour, shades except burgundy, bottle green, black of any size as approved by Engineer in charge in skirting, risers of steps and dodos over 12mm thick bed of cement mortar 1:3 (1cement : 3coarse sand) and jointing with grey cement slurry @ 3.3Kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing ceramic glazed floor tiles (non-skidding) 300x300mm (thickness to be specified by the manufactures) of Ist quality conforming to IS : 13755 of Rak, SOMANY, KAJARIA or equivalent make in colour such as white, Ivory, Grey, Fume Red, Brown laid on 20mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete.

Providing and laying 16mm thick Granite of any colour and shape (area of slab upto 0.5 Sqm) gang saw cut mirror polished (pre moulded and pre polished), machine cut for kitchen platform, vanity counters window sills facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels.

Extra for providing edge moulding to 18mm thick Granite stone counters, Vanities etc. over item No. 8.2 including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.

Extra for providing opening of required size and shape for wash basins/kitchen sink in kitchen platform, vanity counters and similar location in marble / stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete.

Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and cleaning etc. complete on 20mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand). Medium shade using 50% white cement and 50% ordinary cement.

Cement concrete flooring 1:2:4 finished with a floating coat of neat cement including cement slurry, but excluding the coat of nosing of steps etc. complete 50mm thick with 20mm nominal size of stone aggregate.

Providing and laying integral cement based water proofing treatment including preparation of surfaces as required for treatment of roofs, balconies, terraces etc. (Make Armocreate of SWC Chryso France) consisting of (a) applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks / brick bats 25mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining was upto 300mm height including rounding of junction of walls and slaps. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg / sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge. (iv) Finishing the surface with 20mm thick joint less cement mortar of mix 1: 4 admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge including laying glass fiber cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm / sq 3mm deep. (e) The whole terrace so finished shall be flooded with water far a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by Engineer-in-charge. With average thickness of 120mm and minimum thickness at khurras as 65mm.

Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion. Single socketed pipes of 110mm diameter.

Providing and fixing on wall face unplasticised-PVC moulded fitting / accessories for unplasticised- rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion :-

Coupler 110mm.

Single tee with door 110 x 110 x 110mm.

Bend 87.5* 110mm.

Making plinth protection 50mm thick cement concrete 1:3:6 (1 cement : 3 course sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth crushed.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) sal wood.

Providing 40x5mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

Providing & fixing glazed shutters 35mm thick for doors, windows and clear story windows using 10Kg/Sqm (4mm thick) glass panes including stainless steel but hinges of size 75mm x 62mm x 2mm of make Kitch, Arch, Blum with necessary stainless screws in second class deodar wood.

Providing and fixing 35mm thick wire gauze shutters using galvanized M.S. wire gauge of average width for aperture 1.4mm in both direction with wire of dia 0.63mm for doors, windows and clerestory windows with hinges and necessary screws in second class deodar wood.

Providing and fixing of glass panes weighing 13.75 kg/sqm (5.5mm thick) with deodar wood fillets.

Providing and fixing of flush door shutters in pine wood filling and finished with 1mm thick laminated on both sides. Door held with 4 No. hinges with necessary screws as per directions of Engineer-in-charge with deodar wood beading of 100mm x 37mm section (Make :- Green Ardied).

Providing and fixing M.S grills of required pattern in frames of windows etc. with M.S flats, square or round bars etc. including priming coat with approve steel primer all complete (fixed to openings/wooden frames with rawl plugs, screws etc.).

Steel work welded in built-up sections/framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required in gratings, frames, guard bar, ladders, railings, brackets, gates and similar work.

Providing and fixing aluminium tower bolts ISI marked (anodized anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.

Providing and fixing aluminium sliding door bolts ISI marked (anodized anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. 300x16mm.

Providing and fixing aluminium handles ISI marked (anodized anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.

Providing and fixing aluminium hanging floor door stopper ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. Twin rubber stopper.

Providing and fixing oxidized M.S. hasp and staple (Safety type) conforming to IS : 363 with necessary screws etc. complete.

Providing and applying white cement based putty of average thickness 2mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade new work (two or more coats) over and including priming coat with cement primer.

Finishing walls with water proofing cement paint of required shade new work (two or more coats applied @ 3.84 Kg/10 Sqm).

Applying priming coat with ready mixed pink or grey of primer of approved brand and manufacture on wood work (hard and soft wood).

Painting with synthetic enamel paint of approved brand and manufacture to give and even shade two or more coats on new work (Wood work).

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade (two or more coats) on new steel work.

Carriage of material by Mechanical Transport including loading / unloading and stacking at site complete.

Stone aggregate from Source to W/Site

Sand from Source to W/Site

Bricks from Source to W/Site

Part “B” Plumbing

SUB HEAD - I : SANITARY FIXTURES

Providing and fixing white vitreous china pedestal type water closet ( European type) with seat and lid ,10 litre low level white vitreous china flushing cistern and CP flush with fittings, C. I./M.S. brackets 40mm bend diameter flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with lSI marked white solid plastic seat and lid. with white vitreous china flushing cistern & C. P. flush bend.

Providing & Fixing of white vitreous china under counter oval wash basin / circular basin Hindware , Jaquar ,Parko or equivalent with CP brass waste assembly, CP cast brass bottle trap with extension piece 450mm long CP copper connections pipes wall flanges and rubber adapters for waste connection complete including CI/MS brackets duly painted , nuts, washers, cutting and making good the walls floors.

Providing and fixing CP single liver extended basin mixer ( height 85mm) with out popup waste system with 450mm long Braided Hoses and brass nut with all fittings and accessories as per direction of Engineer-in -charge.

Providing and fixing white vitreous china flat back half stall urinal basin of 580x380x350mm with Flat White P.V.C automatic flushing cistern, of approved make with fittings, C.I./M.S. brackets, standard size of C.P. brass flush pipe, spreaders with unions and clamps complete, (all in C.P. brass) with waste fitting as per IS:2556, C.l trap with outlet grating and other couplings in C.P brass including painting of fittings and brackets, cutting and making good the walls and floors wherever equired. Range of three half stall urinals with 10 litre white P.V.C automatic flushing cistern of approved quality.

Providing and fixing Salem Stainless Steel A lSI 304 (18/8) kitchen sink as per I.S. 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required .

Kitchen sink with drain board 510x1040mm bowl depth 225mm( Dry canteen/ kitchen).

Providing and fixing , testing and commissioning of C.P brass single hole sink mixer with CP wall flange, swinging spout complete as required and making good as per direction of Engineer-in Charge

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931( 15 mm nominal bore) Make Hindware , Jaquar ,Parko or equivalent .

Providing and fixing Stainless Steel robe hook fixed to wall/ door with plastic rawl plugs and C.P brass screws including cutting and making good the wall wherever required as per direction of Engineer-in charge.

Providing and fixing stainless steel soap dish holder with all fittings and fixtures of approved make (complete) of approved make..

Providing and fixing PTMT Bottle Trap for Wash basin and sink Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms. compete as per directions of Engineer-in charge.

Providing and fixing 600x450mm beveled edge mirror of sperior glass (of approved quality) complete with 6mm thick hard board ground fixied to wooden cleats with CP brass screws and washers complete.

Providing & fixing stainless Steel towel rail with all fittings and fixtures of approved make (complete) of approved make.

Providing and Fixing stainless Steel towel ring round of approved make of Jaquar, Cera or equivalent.

Providing and Fixing 600120x5mm glass shelf with edges round of supported on anoised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40mm long screws, rawl plugs, etc complete.

Providing and fixing toilet paper holder stainless Steel .

Providing and fixing 15MM dia C.P. brass Bib cock of approved quality conforming to IS: 8931 standards and weighing not less than 690 gms.(make of Jaquar, Cera or equivalent).

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.(make of Jaquar, Cera or equivalent).

Providing and fixing C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 89319(15 mm nominal bore) make of Jaquar, Cera or equivalent.

Sub Head - II-Water Supply

Providing and fixing G.I. pipe to IS: 1239 (Heavy class) with G.I. fittings upto 150 mm dia & above shall be M.S.7 mm thick conforming to I.S. : 3989 including synthetic enamenl paints of approved quality & shade over a coat of approved priming coat (shade as per colour code) and clamps and flanges including cutting and making good the walls complete. For rising mains, suction and delivery headers. ( Internal work - Exposed on wall)

15 mm dia nominal bore of heavy class

20 mm dia nominal bore of heavy class

25 mm dia nominal bore of heavy class

32 mm dia nominal bore of heavy class

40 mm dia nominal bore of heavy class

Providing and fixing of Brass Check Valve of approved make complete. 25mm

Sub Head - III-Drainage System

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) R.C.C. top slab with 1 :2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finsihed with a floating coat of neat cement complete as per standard design.

Inside size 90x80 cm and 45 cm deep including C.l. cover with frame (light duty) 455x610 mm. internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With F.P.S. bricks with class designation 75 & with Crushed stone aggregate.

Providing and fixing PVC pipes 6kg/cm2 pressure excluding pvc fittings, jointing with adhesive/seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion of approved make Supreme/Finolex/ Astral or equilant.

110 mm dia

80 mm dia

160 mm dia

Providing and fixing PVC plain Bend of approved make Supreme/Finolex/ Astral or equilant complete.

110 mm dia

160 mm dia

Providing and fixing PVC Floor Trap of approved make Supreme/Finolex/ Astral or equilant complete.

110 mm X 80 mm

160 mm X 110 mm

Providing and fixing PVC Plain Tee of approved make Supreme/Finolex/ Astral or equilant complete.

110 mm X 80 mm

Providing and fixing PVC Door Bend of approved make Supreme/Finolex/ Astral or equilant complete.

Providing and fixing PVC Door Tee of approved make Supreme/Finolex/ Astral or equilant complete.

Providing and fixing PVC Coupler of approved make Supreme/Finolex/ Astral or equilant complete.

Providing and fixing PVC Clamps for pvc pipes of approved make complete.

Providing and fixing PVC Cowl of approved make complete.

Providing and fixing C.P Jali of approved make complete.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (Sintex, Electroplast, star, Lotous or equivalent having valid ISI license)

Deep Drilling of development of 200 mm dia bore well by DTH/ODEX Method including providing,welding/Fixing, Lowering 200 mm dia PVC Pipes

Measurable quantities may vary at the time of actual execution of the work and shall be allowed as per actual with in the cost.

M/S PARDEEP KUMAR

SUNIL KUMAR