REPAIRS AND POLISHING OF WOODEN FURNITURE OF MARRIED ACCN UNDER GE (NORTH) MEERUT CANTT

Amount

BED PLY TOP (Drg No FD-246 & 247) Removing of old unserviseable plywood top from Bed ply top and S&F new top of same size of 12mm thick ply wood (ISI marked) , BWP (IS:710) grade of appropriate size with screws complete all as shown on drawing and as directed.

Removal of old unserviceable long rail from bed and S&F new long rail with rounded edges of size 1980 mm x 90mm x 35 mm of hard wood teak and fixing the same as shown on drawing including one coat of french polish after preparing the surface by sand paper complete all as specified and as directed.

All as per srl item No. 1.01 above but short rail of size 60mm x 60mm of suitable length.

All as per srl item No. 1.01 above but stiffener of size 60mm x 60mm of suitable length.

Removing of old unserviceable ply wood from the existing head rest of Bed ply top and S & F new OSTF plywood 04mm thick ISI marked, BWP (IS:710) grade to both sides of head rest including 04mm thick teak wood beading all around as per shape and size shown in drawing and fixed with nails including french polishing to ply & beading complete all as specified and directed.

All as per srl item No 1.04 above but foot rest.

Removing of old unserviceable head rest from bed ply top and S&F new head rest made out of Ist class hard wood including provision of 04 mm thick one side teak faced plywood and teak wood beading 04 mm thick as per shape and size shown in drawing and fixed with nails duly french polished with both side MNF arrangement and fixing the same all as shown on drawing.

All as per srl item No 1.06 above but foot rest.

BIN LINEN MULTIPURPOSE (Drg No FD/E6/MAP/09) Removing of old unserviceable top from bin linen multipurpose and supply and fixing new top made out of 18 mm thick BWP (IS:710) plywood with both side lamination with colour / shade as approved by Engr-in-Charge / GE.

Removing of old and unserviceable door shutters of bin linen multipurpose S&F of new door shutters made of 18 mm thick BWP (IS:710) plywood with both side lamination as shown on drawing and as directed.

Removing of old unserviceable hingses and S&F of new hinges to bin linen multipurpose as per size and design shown on drg complete all as specified and directed.

Removing of old broken handles and S&F of new chromium plated steel handles to bin linen multipurpose as per sample kept at BSO (Office) & as shown on drg and as directed.

Removing of old magnetic catcher and S&F of new magnetic catcher to bin linen multipurpose as per size and design shown on drg complete all as specified and directed by Engr-in-charge/GE.

BOOK CASE (Drg No FD-237) Removing of old unserviceable top from Book Case and supply and fixing new top made out of 18 mm thick BWP (IS:710) plywood with allround 2mm PVC edging with colour/ shade as approved by Engr-in-Charge / GE.

All as per srl item No 3 above but shelf.

All as per srl item No 3 above but side of Book case.

Removing old broken/unserviceable legs from book case and S&F new legs of Ist class hard wood teak as per shape and size shown in drawing including french polishing to match the other parts complete all as specified and directed.

Removing old broken/unserviceable doors from the book case and S&F new doors made out of 18 mm thick BWP (IS:710) plywood with both side lamination as colour/ shade as approved by GE/ Engr-in-Charge as per shape and size shown in drawing with piano type hinges complete all as specified and directed.

Removing of old unserviceable back ply of book case and supply and fixing the new back ply of same size made out of 06mm thick BWP (IS:710) plywood with both side lamination (ISI marked) all as shown in drawing and as directed.

CHAIR DINNING (Drg No FD-203/228/279/1105) M&L for removal of unsv back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak wood) all as shown on drg, specified and as directed by the Engineer-in-Charge/GE.

All as per srl item No 4 above but front leg

All as per srl item No 4 above but side rail

All as per srl item No 4 above but front/ back rail

All as per srl item No 4 above but stiffner

All as per srl item No 4 above but back strip

S & F new hard PVC shoe of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge/GE.

CHAIR DINNING ORs (MAP) (Drg No FD/MAP-II/04) M&L for removal of unsv back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak wood) all as shown on drg, specified and as directed by the Engineer-in-Charge/GE.

All as per srl item No 5 above but front leg

All as per srl item No 5 above but side rail

All as per srl item No 5 above but front/ back rail

All as per srl item No 5 above but stiffner

All as per srl item No 5 above but back strip

S & F new hard PVC shoe of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

Removing of old unsv/ troneout PVC seats from chairs and providing holes all round on top of rails in equal distance for caning as per Drg No FD-279.

CHAIR WRITING (Drg No FD-20(M)/202/250/280) M&L for removal of unsv back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak wood) all as shown on drg, specified and as directed by the Engineer-in-Charge/GE.

All as per srl item No 6 above but front leg

All as per srl item No 6 above but side rail

All as per srl item No 6 above but front or back rail

All as per srl item No 6 above but back strip

All as per srl item No 6 above but arm rest

All as per srl item No 6 above but stiffner

S & F new hard PVC shoe of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

CHAIR EASY (Drg No FD-229) M&L for removal of unsv back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak wood) all as shown on drg, specified and as directed by the Engineer-in-Charge/GE.

All as per srl item No 7 above but front leg

All as per srl item No 7 above but side rail of seat frame

All as per srl item No 7 above but front or back rail of seat frame

All as per srl item No 7 above but side rail of back frame

All as per srl item No 7 above but top or bottom rail of back frame

All as per srl item No 7 above but replacement of arm rest

S & F new hard PVC shoe of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

RECANNING TO DIFFERENT TYPE OF CHAIR (Drg No FD-279/229/280/282) Recanning of wooden chair of different sizes with 2mm wide cane having 3mm wide plastic cane border in Godrej pattern all as shown on drawing. (Eg :- Chair Dining,Chair writing,Chair Easy CB etc.)

HAT STAND WITH MIRROR (Drg No FD-233) Removing old broken/unserviceable teak plywood from front frame of hat stand and S&F new 04mm thick OSTF BWP (IS:710) plywood as per shape and size shown in drawing including melamine polishing to match the other parts complete all as specified and directed.

Removing old broken/ unserviceable plywood from back side of hat stand and S&F new 04mm thick BWP (IS:710) plywood both side laminated as per shape and size shown in drawing including melamine polishing to match the other parts complete all as specified and directed.

Removing of old / broken looking mirror from hat stand and supplying and fixing new looking mirror of size 300 x 440 x 5mm duly fixed in position complete all as shown on drawing.

Removing old broken/unserviceable beading from hat stand and S&F new 06x35 mm thick teak wood beading all as per drawing including french polishing to match the other parts complete all as specified and directed.

Removing old broken/unserviceable wooden battens from hat stand and S&F new teak wood wooden battens as per shape and size shown in drawing and as directed.

Removing of old unserviceable aluminium/ brass pegs from hat stand and S&F new brass pegs of size 120x75mm (overall) of latest patternnto hat stand all as per drg and as directed.

PEG TABLE (Drg No FD-277) Removing of old unserviceable top from peg table and supply and fixing new top made out of 18 mm thick BWP (IS:710) plywood duly post formed with 0.80 mm laminates colour / shade as approved by GE, 2 mm thick PVC edge-binding shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed.

Replacement of old unserviceable leg from existing peg table and S&F the same size new leg made out of Ist class hard wood teak to Peg table duly french polished all as shown on drawing and as directed by Engineer-in-Charge.

All as per srl item No 10.01 above but long top rail.

All as per srl item No 10.01 above but short/ bottom rail.

All as per srl item No 10.01 above but stiffener of Peg table.

SOFA SET 04 SEATER WITH CUSHION (Drg No FD-281) Removing of old unserviceable arm rest from exiting sofa set 04 seater and supplying and fixing new 1st class hard wood teak arm rest to sofa set 04 seater complete as shown on drawing.

All as per srl item No 11 above but fornt/ back rail of sofa set 04 seater.

All as per srl item No 11 above but side rail of sofa set 04 seater.

All as per srl item No 11 above but legs of sofa set 04 seater.

All as per srl item No 11 above but wooden battens of sofa set 04 seater.

S&F foam cushion of size 22" x 21",100 mm thick 40 density duly.

Removal of tapestry cloth from existing foam cushion of seat/ back of Sofa set 04 seater and providing new cover of foam cushion of approved shade of Indian make of rate not less than Rs. 450/- per meter duly stitched and fixing the same all as per drawing and as directed. The cover shall be removable duly provided with ZIP in such a way tht ZIP is not visible (Overlapped with cover fabri) as directed by Engr-in-charge (Sample of tapestry cloth shall be approved by the GE).

SOFA SET 05 SEATER WITH CUSHION (Drg No FD-281/FD /MAP-II/02) Removing of old unserviceable arm rest from existing sofa set 05 seater and supplying and fixing new 1st class hard wood teak arm rest to sofa set 05 seater all as shown on drawing.

All as per srl item No. 12 above but front / back rail of sofa three seated.

All as per srl item No. 12 above but front / back rail of sofa single seated.

All as per srl item No. 12 above but side rail of sofa set 05 seater.

All as per srl item No. 12 above but legs of sofa set 05 seater.

All as per srl item No. 12 above but wooden battens of sofa set 05 seater of Drg No FD-281

All as per srl item No. 12 above but Seat / Back of Sofa three seated of Drg No FD/MAP-II/02 made out of plywood 12mm

All as per srl item No. 12 above but Seat / Back of Sofa single seated of Drg No FD/MAP-II/02 made out of plywood 12mm

S&F foam cushion of size 22" x 21",100 mm thick 40 density duly.

Removal of tapestry cloth from existing foam cushion of seat/ back of Sofa Set 05 seater and providing new cover of foam cushion of approved shade of Indian make of rate not less than Rs. 450/- per meter duly stitched and fixing the same all as per drawing and as directed. The cover shall be removable duly provided with ZIP in such a way that zip is not visible (overlaped with cover fabric) as directed by Engr-in-charge (Sample of tapestry cloth shall be approved by the GE).

SIDE BOARD (Drg No FD-241/1112) Removing of old unserviceable top from Side board and supply and fixing new top made out of plywood with both side lamination as per size / colour / shade existing or as directed byd Engr-in-Charge / GE.

All as per srl item No 13 above but door of side board including CP Brass knob and continues piano type hinges.

All as per srl item No 13 above but side of side board.

Removing of old unserviceable back ply of side board and supply and fixing the new back ply of same size made out of 06mm thick plywood (ISI marked), BWP (IS:710) grade duly both side laminated with colour / shade as approved by GE/ Engr-in-Charge and as directed.

Replacement of unserviceable drawer with new drawer of same size and shape duly laminated all sides with 2mm PVC edgebinding. Front of the drawer shall be made out of 18 mm thick BWP (IS:710) plywood with both side lamination with colour/ shade as approved by GE/Engr-in-Charge including CP steel handle.Sides,base and back of drawer made out of 12mm thick commercial ply wood (ISI marked) duly laminated both sides and edge-binding with 2 mm PVC edge binding all as shown in drawing.

Removing of old/unserviceable handle from the side board and supply and fixing new 100mm long CP steel handle with steel screws as per sample ,shape and size all as per drawing and as directed.

Removing of old unserviceable legs with frame from Side board and supply and fixing new Ist class hard wood teak legs alongwith leg frame of side board all as shown on drawing and as directed.

TV TROLLY (Drg No FD/E6/MAP/04) Removing of old broken glass shutters from TV trolley and S&F of new shutters made out of 5.5 mm thick acrylic sheet duly fixed with stainless steel fitting including magnetic catcher to existing TV trolley. All as per size and design shown on drg and as directed/approved by Engr-in-charge.

Removing of old/ broken swivel type castors from bottom of TV trolley and S&F of new 50 mm dia swivel type castors wheel to TV trolley all as specified and directed.

Removing of old unservicable/broken top of TV Trolley and fixing new top made out of 18 mm thick BWP (IS:710) plywood with both sided lamination of colour / shade as approved by Engr-in-Charge / GE.

Removing of old unservicable/broken bottom of TV Trolley and S&F of newone made out of 18 mm thick BWP (IS:710) plywood with both sided lamination of colour / shade as approved by Engr-in-Charge / GE.

All as per srl item No 14.03 above but side of TV Trolley.

All as per srl item No 14.03 above but back of TV Trolley.

TABLE DINNING 6/8 PERSONS (Drg No FD-239/273/376/ 1115/FD/E6/MAP/03) Removing of old unserviceable top from table and supply and fixing new top made out of 18 mm thick BWP (IS:710) plywood duly post formed with 0.80 mm thick laminates of colour / shade as approved by GE. 2 mm thick PVC edge-binding shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed.

All as per srl item No 15 above but for Table dining 6 pers

All as per srl item No 15 above but S&F new leg made of 1st class hard wood

All as per srl item No 15 above but long rail for Table Dinging 8 Person

All as per srl item No 15 above but long rail for Table Dinging 6 Person

All as per srl item No 15 above but short rail

All as per srl item No 15 above but support stiffner

S& F new bracket of size 100 x 100 x 30 mm made of 1st class hard wood and fixing with 02 Nos suitable size steel screws complete as directed by Engr-in-charge

TABLE DINNING (JCOs/ORs) 1200 X 900 MM (Drg No FD-273/FD/MAP-II/03) Removing of old unserviceable top from table and supply and fixing new top made out of 18 mm thick BWP (IS-710) plywood duly post formed with 0.80 mm thick laminates colour / shade as approved by GE. 2 mm thick PVC edge-binding shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed.

All as per srl item No 16 above but S&F new leg made of 1st class hard wood

All as per srl item No 16 above but long rail

All as per srl item No 16 above but short rail

All as per srl item No 16 above but support stiffner

S& F new bracket of size 100 x 100 x 30 mm made of 1st class hard wood and fixing with 02 Nos suitable size steel screws complete as directed by Engr-in-charge

TEAPOY (Drg No FD-34/232/278/382) Removing of old unserviceable top from Teapoy and supply and fixing new top made out of 18 mm thick BWP (IS:710) plywood duly post formed, colour / shade as approved by GE. 2 mm thick PVC edge-binding shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed

All as per srl item No 17 above but leg made of 1st class hard wood

All as per srl item No 17 above but long rail

All as per srl item No 17 above but short rail

All as per srl item No 17 above but stiffner

S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

TABLE 900 X 600 MM WITH / WITHOUT DRAWER (Drg No FD-223/224/283/284) Removing of old unserviceable top from Table and supply and fixing new top made out of 18 mm thick BWP (IS:710) plywood duly post formed, colour / shade as approved by GE. 2 mm thick PVC edge-binding shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed

All as per srl item No 18 above but leg made out of 1st class hard wood

All as per srl item No 18 above but replacement of long rail

All as per srl item No 18 above but replacement of short rail

All as per srl item No 18 above but replacement of drawer with fittings

All as per srl item No 18 above but replacement of bottom centre stiffener

All as per srl item No 18 above but replacement of bottom side stiffner

S & F new hard PVC shoe of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

TABLE BED SIDE (Drg No FD-276) Removing of old unserviceable top from table bed side and supply and fixing new top made out of 18 mm thick BWP (IS-710) plywood duly post formed with 0.80 mm thick laminates of colour / shade as approved by Engr-in-Charge / GE

All as per srl item No 19 above but side of table bed side.

Removing of old unserviceable shelves from table from table bed side and S&F the new shelf made out of 18mm Plywood (IS:710) duly laminated both sides.

Removing of old unserviceable back ply from table bed side and S&F the new back ply of same size of 06mm thick plywood (IS :710) duly laminated both sides asn per colour/shade approved by Engineer-in-charge/GE.

TABLE COMPUTER (Drg No FD/E6/MAP/03) Removing of old unserviceable top from Table Computer and supply and fixing new top made out of 18 mm thick BWP (IS:710) plywood duly post formed with 0.80 mm thick laminates colour / shade as approved by GE. 2 mm thick PVC edge-binding shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed

Removing of old unserviceable bottom from Table computer and supply and fixing the new bottom of same size made out of 18 mm thick BWP (IS:710) plywood with both side lamination with allround PVC edging all as shown on drawing and as directed.

All as per srl item No 20.01 above but vertical board on side of Table computer.

All as per srl item No 20.01 above but keyboard tray of Table computer.

All as per srl item No 20.01 above but drawer of Table computer.

All as per srl item No 20.01 above but pull out mouse tray of Table computer.

Removing of old unserviceable telescopic channel of key board and supply and fixing new soft-close steel telscopic channel to Table computer as directed by Engineer-in-Charge.

S&F new Nylon buffers to Table computer all as shown on drawing and as directed.

S&F new knobs to Table computer all as shown on drawing and as directed.

TABLE DRESSING LADIES WITH MIRROR (Drg No -251) Removing of old unserviceable looking mirror from table dressing ladies and supplying and fixing new looking mirror of size 1200 x 450 x 5mm thick of modi-gurard duly fixed in and including frame of teak wood and polishing complete in all respect to fix on wall all as shown on drawing.

Removing old broken/unserviceable knob from table dressing ladies and S&F new 40 mm size CP brass knob as per shape and size shown in drawing and as directed.

Removing old broken/unserviceable sliding glass from table dressing ladies and S&F new 05mm thick sheet glass with plastic handle as per sample, shape and size shown in drawing complete all as specified and directed.

Removing old broken/unserviceable legs from table dressing ladies and S&F new legs of Ist class hard wood teak as per shape and size shown in drawing including french polishing to match the other parts complete all as specified and directed.

Removing old broken/unserviceable laminates from the top of table dressing ladies and S&F new 1.5 mm thick laminates of best quality fixed with fevicoal as per shape and size shown in drawing complete all as specified and directed.

Removing old broken/unserviceable laminates from the drawer of table dressing ladies and S&F new 1.5 mm thick laminates of best quality fixed with fevicoal as per shape and size shown in drawing complete all as specified and directed.

TABLE DRESSING GENTS WITH MIRROR (Drg No -230) Removing of old unserviceable looking mirror from table dressing gents with mirror and supplying and fixing new looking mirror of size 750 x 450 x 5mm thick of modi-gurard duly fixed in and including frame of teak wood and polishing complete in all respect to fix on wall all as shown on drawing.

Removing old broken/unserviceable laminates from the top of table dressing gents and S&F new 1.5 mm thick laminates of best quality fixed with fevicoal adhesive as per shape and size shown in drawing complete all as specified and directed.

Removing old broken/unserviceable laminates from the drawer of table dressing gents and S&F new 1.5 mm thick laminates of best quality fixed with fevicoal adhesive as per shape and size shown in drawing complete all as specified and directed.

Removing old broken/unserviceable knob from table dressing gents and S&F new 40 mm size CP brass knob as per sample, shape and size shown in drawing complete all as specified and directed.

TABLE CENTRE (Drg No -274) Removing of old unserviceable top from Table Centre and supply and fixing new top made out of 18 mm thick BWP (IS:710) plywood duly post formed with 0.80 mm thick laminates colour / shade as approved by GE. 2 mm thick PVC edge-binding shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed

Replacement of old unserviceable leg from existing table centre and S&F the same size new leg made out of Ist class hard wood teak to table centre duly french polished all as shown on drawing and as directed by Engineer-in-Charge.

All as per srl item No 23.01 above but long rail.

All as per srl item No 23.01 above but short rail.

All as per srl item No 23.01 above but stiffener of table centre.

CHAIR DINNING OFFR (MAP) (Drg No - FD/E6/MAP/06) M&L for removal of unsv back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak wood) all as shown on drg, specified and as directed by the Engineer-in-Charge/GE.

All as per srl item No 24 above but front leg

All as per srl item No 24 above but side rail

All as per srl item No 24 above but front/ back rail

All as per srl item No 24 above but stiffner

All as per srl item No 24 above but back strip

M&L for removal of unsv seat of chair, S & F of new foam cushion 50 mm thick 40 density for seat and duly covered with superior quality cloth, fixed with removable 12mm BWP (IS:710) grade commercial ply wood as specified in drg and as directed and approved by Engr in charge.

TABLE WRITING (Drg No - FD-33/275) Removing of old unserviceable top from Table Writing and supply and fixing new top made out of 18 mm thick BWP (IS:710) plywood duly post formed with 0.80 mm thick laminates of colour / shade as approved by GE. 2 mm thick PVC edge-binding shall be provided with mechanical fixing at two open end side of top complete all as per drawing, as specified and or directed by Engr-in-Charge/GE.

Replacement of Legs of to be made out of Ist class Teak wood well seasoned and fixed as per drg.

Replacement of Stiffener, to be made out of Ist class Teak wood well seasoned

Replacement of Door Shutters to be made out of 18 mm thick plywood (BWP, IS:710) laminted both sides duly fixed with 2mm PVC nedge-binding allround and CP Brass knobs and piano type hinges4 mm thick with 4 lever 40 mm brass lock.

Replacement of back of table writing which shall be made out of 06 mm thick commercial ply wood ISI marked

Replacement of Drawers of table writing to be made out of 18mm Plywood (BWP, IS:710) duly laminated both sides and 2 mm thick edge-binding to be fixed and provided one knob.

Replacement of Hard PVC shoes of approved quality shall be fixed to the bottom of the legs with 20mm long screw wood steel ISI marked.

Polishing : M & L for preparation of old surfaces by grinding through grinding machine including filling of cavities and melamine polishing with two coats of spray polish of approved make with glossy finish after applying putty/ filler/ sealer all as specified and as directed by Enginner-in-charge.

Table Dining 06 Person (FD-273/FD/E6/MAP/03)

Table Dining 08 Person (FD-227/FD/E6/MAP/03)

Table Dining 1200 x900 (JCOs/OR) (FD/E6/MAP/03)

Table peg (FD-277)

Table 900 x 600 mm with / without drawer (FD-223/224/283/284)

Table Centre (FD-274)

Table dressing Gents with mirror (FD-230)

Table dressing Ladies with mirror (FD-251)

Table Writing (FD-275)

Chair Dining FD & MAP (FD-279/FD/MAP)

Chair Writing (FD-280)

Side Board (FD-241)

Sofa Set 05 seater with cushion (FD-281)

Sofa Set 04 seater with cushion (FD-281)

Chair Dining Offrs (MAP) (FD/E6/MAP/06)

Table bed side (FD-276)

Bed Ply Top (FD-246 & 247)

Book case (FD-237)

Bin Linen Multipurpose (FD/E6/MAP/09)

Hat Stand with Mirror (FD-362)

Teapoy (FD-278)

Chair Easy (FD-229)

VARAROHA BUILDERS (BID ID -3480230)

CHAUDHARY FURNITURE HOUSE (BID ID -3476260)

F.M. KHAN SONS (BID ID -3484574)