West Bengal Sdc

To Be Opened

Works

CIVIL WORKS

EE/KSD/NIT-05E/2026-27

Public Works Department

NETAJINAGAR | Kolkata, West Bengal

Amount: ₹24.4 LCloses: 22 Aug 2026Closed

Timeline

Published7 Aug 2026
Closed22 Aug 2026
Bid Opening24 Aug 2026

Tender Value

₹24.4 L

EMD Value

₹48,800

Closing Date

22 Aug 2026, 5:00 pmClosed

Tender Inviting Organisation

Name

EXECUTIVE ENGINEER PWD KOLKATA SOUTH DIVISION

Address

76 DR DEODAR RAHAMAN ROAD KOLKATA - 33

Work Description

Special repair and renovation work to the existing building of Netaji Nagar College at Regent Estate Kolkata 92 Phase III

Tender Information

Tender ID

2026_WBPWD_5017930_1

Reference Number

EE/KSD/NIT-05E/2026-27

Tender Type

Open Tender

Product Category

CIVIL WORKS

Form of Contract

Percentage

Period of Work

35 days

Location

NETAJINAGAR

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

5 documents required · 5 mandatory

Fee/PreQual/Technical

RequiredNIT (.pdf)

RequiredTENDER DOCUMENT (.pdf)

RequiredEMD (.pdf)

RequiredOID (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

EMD Fee Amount

₹48,800

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

7 Aug 2026

Published

7 Aug 2026

Bid Opening

24 Aug 2026

Download Starts

7 Aug 2026

Download Ends

22 Aug 2026

Submission Starts

7 Aug 2026

Bill of Quantities

PercentageBoQ_Ver4.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (30 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.	1	Sqm	1	₹1
2	CEMENT PLASTER (IN COARSE SAND) 20 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)	1	Sqm	-	-
3	Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75 mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2). 12 mm average thickness.	1	Sqm	1	₹1
4	Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.	1	Cum	-	-
5	Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (including equivalent design mix)	-	Cum	1	-
6	Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).	1	Cum	-	-
7	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Mild steel and Medium Tensile steel bars	1	Kg	1	₹1
8Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards
91:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
10	Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100 mm upto 200 mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/ balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge Upto and including 12 mm dia	-	Each	1	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.37 MB

Work Item Documents

2911_Form.pdf

Tender Documents • 0.54 MB

KARMASREE.pdf

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Sqm

₹1

CEMENT PLASTER (IN COARSE SAND) 20 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)

Sqm

Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75 mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2). 12 mm average thickness.

Sqm

₹1

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Cum

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (including equivalent design mix)

Cum

Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Cum

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Mild steel and Medium Tensile steel bars

₹1

8Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards

91:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100 mm upto 200 mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/ balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge Upto and including 12 mm dia

Each