REPAIR AND MAINTENANCE OF BUILDING STREET LIGHT FITTING INCLUDING MISC WORKS AT JAK LI RC UNDER GE 970 EWS

Amount

Supply and laying, of XLPE under ground insulated,,armoured,heavy duty LT 1100 volts 35 Sqmm 3.5 core grade cable with aluminium conductor ISI markedas per IS-7098 (Part-I), laid in trenches/pipes, fixed to poles/walls with suitable saddle & glands complete all as directed incl taking out the old burnt out cables all as specified and directed by Engr-in-Charge.

All as per item No. 1 above but 25 Sqmm 4 core.

All as per item No. 1 above but 16 Sqmm 4 core.

Excavation in trenches not exc 1.5 M wide and not exc 1.5 M in depth and getting out in soft/loose soil or hard/dense soil for taking up or laying of cable & electrical poles etc. complete all as specified and directed.

Excavation in trenches not exceeding 1.5 M wide and exceeding 1.5 M but not exceeding 3.0 M in depth and getting out in soft/loose soil or hard/dense soil for taking up or laying of cable & electrical poles etc. complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removing surplus soil to a distance not exc. 50m and depositing where directed at a level n. exc. 1.5m above the starting point complete all as specified and directed.

Supply and laying dry river sand to be laid in 8 cm before laying of cable and 15 cm above cable in trenche as cable cushioning and covering complete all as specified and directed. Note: for payment purpose punned thickness shall be measured

M&L for brick well burnt locally available sub class 'B' laid over sand cushioning to cable in trenches keeping width of brick parallel to the length of cable complete all as specified and directed.

Supply and Fix in repair for street light fitting bracket made out of 32/40mm bore GI pipe, light grade, bend to shape, 1.2 metre long, fixed to pole/wall with and including two sets of clamps made out of flat iron of size 50 x 6 mm with bolts, nuts and washers, complete all connected accesories for fixing of GI bracket with pole including one coat of anti corrosive primer and two coats of aluminium paint, all as specified and directed.

S & F in repairs Thermoplastic Cable Junction Box/Distribution Board size 333 x 233 x 105 mm, IP 65 with metric knockouts for cable entry of size 10 to 25 sq mm, 2 core including fastening clamp with LT pole, box hinged cover with locking arrangements including with terminals TPN strip, with 01 No MCB SP 6A 'B' Serials complete all as specified and directed. Make: HENSEL or its equivalent as approved by GE.

Supply and Fix in repair Energy efficient LED street Light Luminaire 72 watts capacity comprises a die-cast aluminium housing IP-65 Bow with front toughened glass cover suitable for mounting bracket of 40mm bore GI pipe light grade complete with all accessories and 2 core copper connecting cable of size 2.5 sqmm from junction box to light fitting (Approx 5 Mtr) complete and fixed on existing pole bracket including taking down old fitting as directed. Make : Cat Part No.BARFEG 72W LED V3 of bajaj or equivalent in approved makes.

Supply and Fix in repair Energy efficient LED street Light Luminaire 60 watts capacity comprises a die-cast aluminium housing IP-65 Bow with front toughened glass cover suitable for mounting bracket of 40mm bore GI pipe light grade complete with all accessories including lamp and 2 core copper connecting cable of size 2.5 sqmm from junction box to light fitting (Approx 5 Mtr) complete and fixed on existing pole bracket including taking down old fitting as directed. Make : Cat Part No.BARFEG 60W LED V3 of bajaj or equivalent in approved makes.

Supply and fix in repair of MS Cross arm, bracings, supports , clamps and back plate fabricated from structural steel section, including nut , bolts , washers, welding , bendings cold or hot, drilling hole for both in any shape or size as indicated or directed and inclusive of one prime coat, one under coat and one finishing coat of paint incl taking down the old unserviceable cross arms complete all as directed

Supply and fix in repairs galvanised iron tubes 50mm bore, light grade including all fittings fixed to wall, ceilings and or laid in floors/tenches/under road etc complete for cable protection all as specified and directed.

Material and labour for sub main wiring with two runs of single core PVC insulated (FRLSH) unsheathed copper conductor multistranded cable of size 2.5 sqmm 1100 volts grade drawn through in & including PVC conduit/casing caping of suitable size & 1.5 sqmm single core copper conductor multistranded PVC insulated (FRLSH) unsheathed cable earth wire continuity conductor fixed on pole for connection from junction box to light fittings / switch to top of the Over Head Water tank of height not more than 30 mtr from ground level including taking down old complete all as directed by Engr-in-Charge. Note : (i) Two run of cable 2.5 sqmm and one run of 1.5 sqmm earth wire and one run of PVC casing caping/PVC conduit shall be measured and paid as one unit only. (ii)Phase should be Red / Yellow / Blue, neutral should be black and earthing wire should be green in colour

Taking down old UNSV ACSR conductor of any size from pole/any description and M&L for ACSR conductor including stringing on LT/HT poles complete including aluminium binding wires,jumpering,bindings at insulators etc of any type complete all as directed by Engr-in-charge.

Disconnecting the bindings of loose overhead conductors of LT lines from insulators and restringing the same for proper sag and re-binding incl aluminium winding wires, tapes etc and jumpering for any type of conductor complete of single run conductor all as directed. Note: Triming of tree branches upto 3 mtrs from the conductor is deemed to be included in the rates quoted.

Supply and fix in repair of insulator pin type porcelain vitereous , white brown or green insulator including one galvanised mild steel spindle , two galvinised washer and one GI nut 100 mm height and 65 mm dia for 1100 Volt grade complete all as directed.

Supply and fix in repair of insulator shackle type, porcelain, vitereous, white brown or green insulator including one galvanised mild steel straps, washers, insulator bolts, washer and nuts for working pressure 1100 Volts height 100mm, dia 115mm, section of strap (31x5) mm dia of bolt 14 mm complete all as directed by Engr in charge.

Supply and erection of steel tublar swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts, screws as specified type 410 SP-31 (9.0 mtr long) and shifting of conductors and insulators etc incl painting the exposed portion of the pole with two coats of aluminium paint over a coat of red oxide primer and internally through out plus embedded portion with two coats of black bituminous paint over a coat of red oxide primer. Marking of pole number with black paint in yellow circle complete fixed in repair all as specified and directed by Engr-in-Charge.

Material & labour for cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) for foundation of pole complete all as specified and directed.

Material & labour for cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in coping of pole complete all as specified and directed.

Supply and fix in repairs timer switches for street / security lights astro type (Having longitude and latitude of Indian cities in memory) 415 V three phase of 20 to 32 Amp rating with three pole power contactor, timer relay, incoming MCCB having thermal and magnetic protection TPN 40 to 63A capacity 4 pole, protection such as over load and single phase relay fitted inside sheet steel enclosure of 3 mm thick outdoor type of suitable size incl fixing arrangements in wall / floor / pole complete all as specified and as directed.

Material and labour for earthing complete with galvanised steel earth plate electrode 60cmx 60cmx 6.00 mm thick buried directly in ground (Earth pit not less than 2.25 metre below normal ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected and including GI strip 32mm x 6mm by means of GI bolts, nuts, check nuts and washers, earth plate surrounded by packed alternate layers of coal dust and common salt 15cm thick, all around top and bottom and watering pipe 40mm bore of GI pipe light grade with funnel and wire mesh and 50mm bore GI pipe light grade for protection of GI strip 32mmx6mm from top of earth plate upto test point (upto 7.5metre in length) connected with suitable size of GI nuts, bolts and washers all as shown in Electrical plate No. 3 of SSR Part-I, testing on completion including excavation/earth work in any type of soil/rock, PCC chamber (1:3:6) using 20mm graded stone aggregate and 50mm thick RCC (1:2:4) type B-1 cover slab reinforced with 8mm dia TMT steel bars @ 100mm c/c both ways with suitable handle for lifting arrangement & including formwork and MS frame using MS angle iron 25x25x3mm and including taking out old complete all as specified and directed. Note :- Earth pit shall be constructed 50cm from the side of excavation to avoid sinking of pit

Taking down Aluminum strip of size 20 x 3mm with saddles and fixing screws etc. for roof conductors and down conductors above ground and refixing in the same location with new nuts and bolts, screws of suitable size and length and connected to air termination rod on top of the Over Head Water tank of height not more than 30 mtr from ground level complete all as directed

S & F in repairs Copper strip 20 x 3.15 mm having 99.9% pure copper with saddles and fixing screws etc. for roof conductors and down conductors above ground incl taking out old one, Over Head Water tank of height not more than 30 mtr from ground level complete all as specified and as directed.

S & F in repairs integral LED aviation light comprising of aluminium housing with polycarbonate enclosure with necessary fixing arrangement such as GI pipe, fixing clamp, brackets, etc., complete all as specified for Over Head Water tank of height not more than 30 mtr from ground level. Make: Bajaj Cat No BGAV 302 LED or equivalent in Philips/CG)

Supply and Fix in repair Energy efficient LED street Light Luminaire 45 watts capacity comprises a die-cast aluminium housing IP-66 45 W with front toughened glass cover suitable for mounting bracket of 40mm bore GI pipe light grade complete with all accessories and 2 core copper connecting cable of size 2.5 sqmm from junction box to light fitting (Approx 5 Mtr) complete and fixed on existing pole bracket including taking down old fitting as directed. Make : Cat Part No.BARFEG 45W LED V3 of bajaj or its equivalent make of Philips /CG/wipro .

S & F in repairs Air termination, single pointed copper rod 12 mm dia and 300 mm long for OH Water tank of height not more than 30 mtr from ground level complete all as specified and as directed.

S & F in repairs Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos. 8 mm dia 25mm long hexagonal Head screw complete all as specified and as directed.

M/S GHULAM HASSAN KUCHAY

M/S U.K. ENTERPRISES

FG CONSTRUCTION

M/S Noor Mohammad Shalla

M/S Manzoor and Co

M/S N A Enterprises