Construction of Marriage hall Near Vinnavaram Perumal Temple for Arulmigu Sri Mutharamman Temple at Kulasekarapattinam Tiruchendur Taluk in Tuticorin District

Amount

Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except to rock requiring blasting but including shoring strutting and bailing out water wherever necessary and refilling the sides of foundation with excavated earth in a yers of not more than 15cm thick well consolidated and depositing the surplus earth within the compound with an initial lead of 10 metres and lift of 2 metres in places as shown jy the departmental officers and clearing evelling the site etc complete complying with standard specification.Upto 2.00 m depth

Cement concrete 1:5:10 (one cement five sand and Ten aggregate) using 40mm gauge hard granite broken stone jelly for foundation including cost and conveyance of all materials labour for mixing, laying, compacting, curing, dewatering, side shuttering, wherever necessary including curing etc., complete complying with standard specification.

Supplying and filling using 20mm gauge hand broken granite stone jelly for foundation and basement including dewatering if found necessary and laid of not more than 15cm thick and compacted, etc. complete complying with standard specifications

Supplying and filling using 40mm gauge hand broken granite stone jelly for foundation and basement including dewatering if found necessary and laid of not more than 15cm thick and compacted, etc. complete complying with standard specifications

Supplying and filling in foundation, basement, etc with filling CS sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and filling in foundation, basement, etc with Gravel in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)

For Column footings and Grade beam

For Plane Surfaces such as rectangular or square RCC Columns

For RCC Slabs, beams T or L beams

Double Additional Strutting for 3.30 m to 5.10

Sunshade

Circular Column

Supplying fabricating and placing in position mild steel or ribbed for steel bar / rods for reinforcement grill for all RCC works including cost of steel and binding wire anc about* charges for decoiling cutting binding and tying the grills ctc complete complying with standard specification as directed by the departmental officers.

Providing and laying in position, standardised concrete Mix M25 grade (Beyond 10KM and up to 24km aerial distance from sea water front )in accordance with IS 456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of work with minimum cement content of 350 Kg/m3 and maximum water cement ratio of 0.50 including admixyure (Plasticiser / super plasticiser ) in recommended proportions as per : 9103 to accelerate retard setting of concrete, improve workability without impairing strength and durability with about (5Cum) 7730kg. of 20mm machine crushed stone jelly and with about (3.3cu.m.) 5156kg. of 10-12 mm machine crushed stone jelly with about 4.79Cu.m. )7670kg. of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering and also including laying , vabricating with mechical vibrators, finishing curing etc., and providing fixtures like fan clamps in the RCC floor/ roof slab where ever necessary without claiming extra ,etc., complete.complying with standarde specification and as directed by departmental officers.The coarse and fine aggregates to be used should compling with the requirements of IS Standards. ( No separete payment will be made by the department for excess usage of materials)

Upto basement

Ground Floor Super Structure

First Floor

Second Floor

Brick Work Using Country bricks in Cement Mortar 1 : 5 (One cement and Five CSsand) 8 3/4" x 4 1/4" x 2 3/4" including cost and conveyance of all materials and all labour charges including curing working in height etc complete

Upto basement

Ground Floor Super Structure

First Floor Super Structure

Second Floor

Brick Partition wall in C.M 1 : 3 using country Ground Bricks 8 3/4 x 41 bricks size including cost of all materials and labour charges etc… complete with 11.40 cm thick including cost and conveyance of all materials and all labour charges including curing working in height etc complete

Brick work with Dry Brick using Second Class Ground moulded Chamber Burnt Bricks of size 9" x 4 3/8" x 2 3/4" in cuting cost of all Materials and labour charges etc complete

Palstering Work in CM 1 : 3 (One Cement Three sand) with 20 mm thick including Cost and Conveyance of all Material and all labour charges etc complete.

Plastering with CM 1 : 5 (one cement and five sand) 12mm thick including scaffolding finishing curing etc., complete complying with standard specification and as directed.

Special ceiling plastering and finishing the RCC exposed suface slabs sunshade facia canopy slab staircase waist slab landing slab etc with cement mortar 1 : 3 (one cement and theree sand) 10 mm thick including lacking and providing necessary cement mortar nosing beading etc wherever necessary and as directed complying with standard specification

White washing two coats using freshly burnt slacked lime white in colour for pillars and walls fevicol type gum/ blue powder should be used in the preparation of white wash solution as per IS 6278 of 1971. Aduate quantity of approved blue poeder to be added to white wash solution for application to the walls.

Painting two coats with approved qaulity of water based exterior emulsion paing including on coat of priming coat in cement plastered wall surfaces in all floor including cost fo all materials brushess, etc., scaffolding charges etc., complete complying with standard specification and as directed by the departmental officers.

Weathering course concrete using best quality broken brick jelly of size 20mm uniform gauge in pure slaked lime, the proporation of brick jelly to lime being 32 to 12 1/2 (No sand to be added) by volume and laid over the RCC roof slab in a single layer and consolidate to the finished thickness by beating the concrete with wooden beaters of approved pattern keeping the surface constanly wet by sprinkling lime jaggery water etc. complete complying with standard Specification.

Finishing the top of roof with one course of approved first quality of new Machine pressed tiles of size 200mm x 200mm x 20mm thick of approved quality laid in C.M 1 : 3 (one cement and three sand) 12mm thick mixed with water proofing compound conforming to Indian standared as approved by the departmental officers at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same mortar mixed with water proof compound and red oxide etc. complete complying with standard specification.

Paving the flooring with high quality coloured and Double charged Virtified tiles of approved quality an brand of size 600mm x 600mm x 8mm thick for flooring of approved quality and colour set in cm 1 : 3 (one cement and three sand) 20mm thick and pointing with white cement using at the rate of 0.40 Kg/m2 including finishing the joint neatly poiting flush with tiles surface etc, complete complying with standard specification and as directed by the departmental officer.

Paving the floor with Granite slab of size 1200 x 600mm and above 18/20 mm thick in all floors in CM 1 : 3, 20mm thick Granite salb jet black 18 to 20mm thick for flooring

Providing Double nosing to the granite slab in corner including hiere charges for tools, palnts and all incidental charges etc., complete.

Supplying and fixing over the hard base with cement based Hydraulic pressed pre polished Anti - Skid tiles 30 cm x 30 cm x 20 mm thick (Like Eurocon) of any colour with cement mortar 1:3 (One cement and three sand) 20mm thick and pointed with same colour cement added with colour pigments at 0.43 kg/m2 including cutting, wastages finishing and curing ad directed by the departmental officers etc complete complying with standard specifications.

Flooring withjoint free retified glazed Ceramic antiskid concept thiles of approved quality and colour of size 305 x 305 x mm thick in all floors over a base layer of cement mortar 1:3 (one cement three sand) 10mm thick and laid straight alignment and point6ed neatly with same.

Dadooing the walls with with best approved quality colour glazed tiles of size 300mm x 450mm x 8mm C.M 1 : 2 including cost of all material and laobur chargees etc., complete

Supplying and fixing in position European water closet with P or S trap and double flapped seat cover, PVC or porcelain low level flushing tank including all internal fittings on CI brackets, 12mm nipple, chromium plated brown head.

Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 x 400mm with a pair of cast iron brackets including cost of 15mm dia metre brass chromium plated pillar tap, 32mm dia metre G.M. Wheel valve, etc., complete

Supplying and fixing of fine Cuddapah slab of 38/40 mm thick for Cup - Board arrangments in brick wall including levelling to correct alignment etc complete complying with standard specification and as directed by departmental officers.

Supply and fixing in poistion CI Manhole covers with CI Frames (Heavy Duty) of size 60 cm x 60 cm as directed by departmental officers.

Manufacturing Supply and Fixing of M.S. Steel with following specification MS angles of size 40 x 40 x 6mm at 3.5 kg/m used for the outer frame and MS angles of size 35 x 35 x 5 2.60 kg/m for the shutter frames including one coat of red oxide primer.

Supplying and fixing PVC ventilating shaft of 100mm dia with 3 metre height including cost of 100mm dia AC cylindrical cowl of best approved quality etc., complete complying with standard specifications and as directed by the departmental officers

Supply and fixing mild steel grills for windows ventilator gate ladder etc., including priming coat as directed by the departmental officers

Supplying and erecting Gear operated type Rolling shutter with ISI make of approved size and section using 18GI sheet . The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers transportation charges etc., complete as directed by the departmental officers

Manufacturing supplying and fixing of steel door with the following specification MS angels of size 40x40x6mm3.50Kg are used for the outer frames and M.S. angles of size 35x35x5mm 2.60KG/mfor the shutter frames . All members are given a coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc., complete.

Providing cupboard shelf double leaf shutter using 19 mm thiek water proof plywood shutter with country wood frame 12 x 5 cm size both vertical and horizontal fram. The edges of plywood shutter should be fixed with 25 x 12mm siz teak wood beading. The MS Piano hinges 2 Nos each 30 cm lkong should be fixed in each shelf 3 strip magnetic catcher 4 nos 100 mm long handle 'D' type 2 nos, 50 mm size door lock 1 no 125 mm long brass pat lock 1 no should be fixed in each shelf. After the completion of the Cupboard shutter the plywood areas both inside and outer side and country wood frame areas should be painted with twoo coats of enamel painting. The rates inclusive of nails fevicols, screws etc., complete.

Painting tow coats over new Iron work with best approved quality synthetic enamel paint including a priming coat with primer of approved quality including cost of primer etc including cost of primer etc complete in all floors. The rates shall include cost of all materials, taxes, brushes, scaffolding charges and labour charges for painting etc. complete complying with standard specification (The make and colour of apint to be used should be go approved by the departmental officers before use on works)

Supplying and fixing in position of 35 mm thick solid core flush door shutter dobule leaf with TW ply on both side and with TW lipping of size 35 x 12 mm on all edges with necessary adhesives and C.P. Scres. Alu. Butt Hinges (6 nos. 250 x 16mm Size), Alu. Aldrop 1 No. 250 x 16 mm size), Alu. Aldrop 1 No. 250 x 16 mm Size, Alu. Tower Bolt 2 No. 200 x 12 mm size, D type alu

Painting two coats over new Wood work with best approved quality synthetic enamel paint including a priming coal with ready mixed primer of approved quality including cost of primer etc complete in all floors. The rate shall include cost of all materials, taxes, brushes, scaffolding charges and labour charges for painting etc. complete complying with standard specification. | The make and colour of paint to be used should be got approved by the departmental officers before use on works]

Stainless Steel (Salem Stainless Steel) Door Framc (Box Section using Stainless Steel Plate of 1.6mmthick) of size 100mm x 60mm with a rebate of 30 /35mm x 15mm on one side of the frame including supplying and fixing dovetai splayed end stainless steel hold fast etc ( SI/NO: 1301 Pe:44

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with Gl/lmm 25GSM and 100% corrosion free, the profiles are multi chamberec sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage o water even at most ranging storms and shoulc have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) J.ouvercd Ventilators of from Tlie profile the size of outer frame 60mm x 5tfmm and shutter profile size of 60 x [7Xinmboth profiles are reinforeed with Gl/lmm I25< iSM and 100% eorrosion free, the profile are multi chambered sections with wall thick of 2mm. Hie KPJ)M rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. Hie window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executivc Engineer before use on work

Supplying and fixing of Solid PVC Door Shutters using 19 Gauge 19mm MS square ubes for styles and outer frames. 15mm MS square tubes for top. lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail Lock rail and bottom rails shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm , with suitable rabate for housing the shutter.

Supplying and fixing in position best approved of 1SI quality of PVC rain water down fall pipes having a pressure of 4 Kg./sq.cm including cost of nccessry PVC shoe, PVC bend, gratings of required diameter and spccia clamps, brass screws, nails, etc. and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc. complete. The rate shall be inclusive of cast of removable iron grating. The PVC pipe shall be| fixed in wall with special type of clamps. Special type of "U" clamp at the centre of the ipc line shall be fixed in addition to those for| more than 3.0 M pipe length complying with standard specification. 110mm dia PVC rain water down fall pipes.

Supplying and fixing Mirror 600 xx 450 including cost and conveyance of all materials and all labour charges etc complete

Supplying and fixing best approved quality Brass Chromium Plated Towel Rail 600 mm| Long and 20mm Diametre with brackets oi same materials including cost teakwood plugl and CP Screws etc.,complete complying with) standard specifications.

Supplying and fixing in position 15/12mm dia Chromium Plated brass screw down tap including cost and conveyance of all materials| and all labour charges etc complete

Supplying and fixing in position of P V CI Nahini Trap of size 100 x 75mm with best stainless Steel Gratings of approved make and quality, fixed over a bed of brick jelly{ concrete 1:2:5 (One part of Lime, Two parts oJ Sand and Five parts of 40mm size brick jelly)! and finished with cement mortar 1:3 ( One part of Cement and Three parts of Sand) including cost and conveyance of all materials and labour charges including dismantling the masonry works wherever necessary and making good etc .gp complete.

Supply ami Fixing PVC water lank of 1000 Lit including cost of all materials and labour charges etc., complete

Supplying and fixing in position first quality uul approved variety Gun Metal Gate valve (Heavy type)/ Wheel Valve (Heavy Duty) with 1SI Mark of approved quality of the following dia including cost of shellac, thread, labour barges for cutting, threading, fixing in position etc.. for both internal and external water supply arrangements.

32mm dia Gun Metal Gate Valve

32mm dia Gun Metal Wheel Valve

Supplying laying and jointing following diameter IJPVC pipes of super thick approved quality and best quality conforming to 1SS and with 1S1 mark of the following sizes including cutting threading and fixing UPVC specials but excluding cost of such specials Fixing into Bore well / below ground level for erection of compressor motor, suction line air pipe etc.,

32mm dia PVC Pipe

Supplying and fixing of 110mm dia PVC Sanitary pipe having a working pressure of 6 kg/cm2 including cost and coveyance of all material and all labour charges etc complete

20mm x 15mm Reducer Elbow

32mm dia elbow

Supplying and fixing of 110mm dia PVC Sanitary pipe having a working pressure of 6 kg/em2 including cost and conveyance of al materials and all labour charges etc complete.

Supplying and fixing in position of the following UPVC specials

110 mm dia Door elbow

110mm dia Elbow

32mm Elbow

32mm Tee

32mm x 25mm Reduceer elbow

Supplying and creeling in position of following item capacity Industrial Model Reverse Osmosis Water cum Purifier to deliver potable water with world health organisation (WHO) standards with following accessories. (a) MS Skid - I No. (b) Media 11054 No. Vessal with 20 nb Multi Port Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50Hp - INo (d) Vertical Pump 2-9. 2.00HP/Single Phase - INo. (e) Membrane 40x40 flim tech (or) equailaents/Osmonic (USA) -INo. anc Membrane Pressure Vessal 40x40-INo & Pressure gauge - 2Nos. (f) Flow Metre- 1 No 20" Filter with Housing-INo, Low pressure Switch - INo. Level Switch - INo & Necessary CPVC Pipes and Fittings. The system shall be provide with Twp Panel Control System with necessary Stainless Valve and Fittings and loat Control etc. The rate should be inclusive of all civil works wherever necessary to instal the system in position and intact.

Supplying and Fixing of 4 nos fire buckets made out of 40 x 40 x 6 mm MS Angle including all incidential charges etc., complete (SOR) - item no : 8 (h) Page No : 142

Supplying and Fixing of Fire Extinguiser Co2, 4kg confirming to TAC norms including all incidential charges etc., complete (SOR - Item no : 8 (h) page no : 142

Drilling of 6" dia bore wells any where in tamilnadu including transportation from one place to another within tamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc. By first taking a pilot bore of 140mm / 150mm dia and then enlarging to required dia direct or reverse rotary mud circulation method using rotary rigs fuel, labour and drilling bentonite and water required for drilling at site (site will be shown by the Departmental officers) including construction of mud pit.(Based on TWAD Board schedule of rate.

Supplying and fixing of 15mm dia CS PVC casing pipe assembly with slota (or) with out slots in the driilled hole including welding the joints etc complete and supplying and packing the annular space with pebbles of size and quality as approved by the departmental officers etc complete

Supply and fixing of 3.00 HP Submersible pump including Labour charges for errection of Submersible pumpset in borewell all acessories vost and conveyance etc., complete as directed by departmental officer

Labour charges for errection of submergible pumpset in bore well including fixing and jointing submerigible cable with proper clamps etc complete. as directed by departmental officer

Supplying and fixing of 3 phase electrical panel Board D.O.L with two level guard and auto start including cost and coveyance and fixing charges etc complete. as directed by departmental officer

Supplying and fixing of 4 core 6 PVC armoured UG cable including cost and conveyance and labour charges etc complete. as directed by departmental officer

Supplying and fixing of HDPE pipe 50mm dia HDPE pipes for 5 HP Submersible pumpset including cost and conveyance of all materials and all labour charges etc complete. as directed by departmental officer

Supply of Suitable dia PVC Nylon rope for submersible motor as directed by departmental officer

Wiring with 2 x 1.5 sqmm (22/0.3) PVC insulted SC unheated Cu.Conductor of 1100v grade in suitable PVC rigid pipe concealed in wall and ceiling with pvc acessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. Switch and making good of the concealed portion wit suitable colour for pvc concealed light / Fan point (For electronic regulator) (5 Points per coil)

Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor o 100V grade in suitable PVC rigidpipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A .T. switch and making good of the concealed portion with suitable colour for PVC concealed ight (6 Points Per Coil) (For Rooms like Bath oilet,& Pump room etc..)

Wiring with 2xl.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mm x 100mm x 113mm T\V switch box with 3 mm thick Hvlem sheet cover for 5 A 3 pin non inter locking CS Plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point.

Wiring with 2x4 sqmm(56/0.3) PVC insulated SC unsheathed Cu.Conductor cable of I100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mm x 100mm x 63mm TW switch box with 3mm thick hylem sheet for 15 A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire . and making good of the concealedportion. with suitable colour for concealed power plug point

Wiring with 3 x 1.5sqmm(22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick ylem sheet covered TW switch box and 5A \T. switch (Two way) and making good of the on cealed portion with suitable colour for on cealed staircase light point

Supply and fixing of single box type 4'20 LED fitting complete with copper choke and condensor with conduit piipe from the ceiling with PVC unsheathed Copper leads from terminals to the fitting with Tube (S.D.89)

Supply and fixing of single box type 4'20 W LED fitting complete with copper choke and condenser with JW round blocks on wall or veiling with LED tube with PVC unsheathed Copper leads from terminals to the fitting .

Supply and fixing of 1200 mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator, with 1 metre down rod on existing clamp

Supply and fixing of 30 W LED street light flu. Fitting. 32 mm dia GI pipe (Class 'B') with 1 No 32mm GI Bend complete on the existing post wall with 16 A aerial fuse unit on MS plate with PVC unsheathed Copper leads MS clamps and aluminium painting with flu.tubes

Supply and fixing of 3 Phase 3ZPC aerial fuse unit for 3 Nos 32A fuse units (500V) on suitable MS sheet covered with6mm thick hylem sheet on suitable angle iron work the tapping pole with necessary clamps.

Supply and fixing of TNEB Meter Board suitable for 3 Phases 100A sendee connection made up of suitable angle iron frame work oi size 2 feet x 1 1/2 feet using angle iron of size 1 1/2" x 1 1/2" x 1/4" rigidly fixed on wal covered with hylem sheet of size 2 feet x , feet of 12mm thickness with necessary bolt and nuts supports and supply and fixing of Nos 100A fuse units (500V) 1 No. Neutral link copper earth flat of size 1" x 1/4" with inte connection of EB meter to fuse units by 7/1 PVC insulated copper wire with earth connection complete

Supply and Laying of 3 1/2 x 35 sq.mm PVC armoured LTUG cable in a trench to be excavated to a depth of 0.75 metre putting 0.15 mt. Layer of M.Sand and covering the calbe completely with bricks and M.Sand and refilling the earth to make good.

Supply and fixing of brass cable gland for 3 1/2 x 35 sqmm PVC armoured LTUG cable with earth connection

Supply and providing cable end termination o 1/2 x 35 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrica connection complete

Supply and fixing of Horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure with 40A 4 pole MCB isolator as incoming and 12 Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB's should be with the IS! mark (like standard make)

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure Distribution board 1 No 32 Amps MCB as incoming and 6 Nos 6 Amps to 32 Amps SPMCB outgoing in Jlush with wall and making good of the concealed portion with earth connection only he MCB DB and MCB's should be with IS mark (Like Standard make).

Supply and fixing of 300mm (12 inch) Sweep (Light duty) AC exhaust fan complete with necessary wall opening and making good of the Wall.

Supply and fixing of louvers shutters arrangment for 300mm (12 inch) Sweep (light duty) Ac exhaust fan.

Supply and run of 4 of 6 scj.mm (84/0.3) PVC insulated SC unsheathed Cu Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 14 SWG TC wire and making good of the concealed portion with suitable colour

Supply and run of 4 of 4 sqmm (56/0.3) PVC insulted SC unsheathed Cu.conducter of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continunous earth wire connection of 14 SWG TC Wire and making good of the concealed portion with suitable colour

Earthing as per the ISI specification with an earth electrode of 2.1 mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6,, with necessary funneling arrangment with necessary masonry work and with 38mm RCC cover slab for the brick mansory.

Supply and run 2 of 4 sqmm (56/0.3) PVC insulted SC unsheathed Cu.conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14S WG TC Wire and making good of the concealed portion with sutiable colour

Supply and fixingof WT Bulk head fitting with guard (Philisps / Bajaj / Crompton / K.Lite) Suitable for incandescent lamp with 60 LED

Supply and fixing of 20 Amps DP Plug and Socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug) (Legrand (MDS) / Hager (L&T) make)

Supply and fixing of 3 Nos. 5 Amps (3 Pin and 2 Pin) combined flush type wall socket with control switches concealed in suitable TW Box convered with system sheet in flush with wall with earth connection (For Computer Plug Socket)

Supply and run of 2 of 1.5 sqmm (22/0.3) PVC insulated SC unsheathed CU. Conductor of 1100V Grade in rigid pipe concealed in wall and ceiling with connection of 14SWG TC wire and making good of the concealed portion with suitable colour (For Computer Plug )

Manufacturing Supplying and Fixing of Stainless Steel Head rails for staircase using 50 mm dia 304L Grade Stainless Steel pipe of 1.60 mm thick at required locations to a height of 900 mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00 mm thick as vertical at 900 centre with 2 Nos. of 25mm dia intermediate horizonal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polising, conveyance, electrical charges, etc. complete,

Supply and Fixing of Aluminium Dye Cast Letters 9" height in Tamil of approved size and colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured lalyer is set into the kiln for the heat treatment process.for

M J ENGINEERING CONSTRUCTION