CERTAIN SANCTIONED WORKS UNDER GE (WEST) JABALPUR

Supply and fixing Single phase ceiling fan 1200 mm permanent magnet brushless DC Motor 230 v 50 Hz single phase 26-30watt rated current 0.16 amp,pf 0.98 370/360 rpm air delivery 220m3 rated service value 629m3/min/watt no of blades three type of blade leaf 1.05 mm thick aluminium sheet remote control radio frequency 5 speed +off timer option speed regulation class of insulation two nos bearings including connecting wire complete with all as required and directed at site by eng in charge.

Supply and fix Shadow less light fitting complete with emergency power unit & battery back up for 60 minutes, double dome type,white in colour, (3 KVA), having dome of 600 mm dia min,rust stain proof metal, 160000 lux, should be manual or touch screen type control panel, 220 volts, power req 65 Watts per dome, Colour temp 5100K cri 90 depth 1000mm complete all as required and directed by Engr In charge

S & F Galvanized steel high mast lighting system of 12 meter in two section, 3 mm section thickness, top dia 150 mm, bottom dia 340 mm, with 2/3 wire rope system and its accessories. System is suitable for loading 06 nos 120W LED lights with necessary excavation earthwork, PCC/RCC as required for foundation filling and acceseries required for mounting complete all as per required and directed

S&F LED flood light fitting with peanut lenses 230VAC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete 200 watt complete all as required and directed by Engr- in- Charge

Supply, fixing and connecting PVC insulated, round,sheathed, multicore, industrial flexible cable with bright annealed copper conductor, 1100 volts grade cable of size 1.5sqmm, 3 core complete all as specified and as directed

Supply, fixing, connecting and testing of Automatic Street light switch using infrared Sensor based Nature Switch for automatic switching of street lights, Nature switch operation should be based on Natural light lux level. Required illumination level for switching on is < 30 lux and for switching off > 10 lux. The sensor should also have part night operation facility for 4 - 12 hours. The sensor alongwith suitable power contactor, incoming-outgoing MCBs should be enclosed in a pole/wall mounted hensel enclosure made out of Rust proof, electric shock proof, termite proof and FR grade SMC junction box conforming to IP-66, The circuit should be suitable enough to take 15 KW Three phase load with contactor 32 Amps conforming to IEC-60947-4-1/IS-13947-4-1 & incoming and outgoing MCBs of rating 32 Amps per phase conforming to IEC-60898/1S- 8828 and circuit wiring of minimum 10sqmm copper conductor wire in and including providing of 50x6mm flat iron clamp, necessary nuts and bolts complete all as specified and as directed.

Supply , laying and testlng cable XLPE insulated, screened, PVC bedded, galvanized, steel strip or wire armoured, electric power cables (Heavy duty ) 1100 volts grade with stranded aluminium conductor of size 4 core 25 Sqmm complete all as specified and directed by Engineer in charge

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth, for foundation, etC or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sqm on plan and n exc 1.5m in depth and getting out in any type of soil complete all as specified and directed by Engineer in charge

M&L for Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

M&L for Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed.

M&L Foundations, including rafts, footings, foundation beams,plinth beams, bases for columns, etc., basement slabs, under-reamed piles and mass concrete B1 1:2:4 20mm aggregate complete all as per required and directed.

M&L Providing precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar,complete, in walls using C1 20mm 1:3:6 aggrregate complete all as per required and as drected

Please Enable Macros to View BoQ information