PERIODICAL SERVICES AND RELATED B/R WORKS AT CERTAIN BLDG IN ZONE-I UNDER AGE B/R-III OF GE (SOUTH) MEERUT CANTT

Amount

Complete removal of existing treatment on wall/ roof projections including chajja, facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour complete all as specified and directed.

M&L for applying 1.5 mm to 2 mm thick exterior grade wall care putty making smooth surface complete all as specified and directed.

M&L for applying two coat of oil emulsion distemper (OBD) (on plastered or unplastered surface) using roller on old wall surfaces complete all as specified and directed.

M&L for preparation, removing/scrapping down existing surface where ever necessary of old plastered or unplastered surfaces of walls/ceiling/soffits etc and applying one coat (finished coat) of oil bound distemper (OBD) white or tinted to achieve desired surface finish as directed, including removing existing nails, if any, any Nos and filling the disturbed /uneven surface, holes/voids with wall care putty/POP/white cement where ever necessary to achive the smooth surface complete all as specified and as directed.

All as item No 4.00 here-in-before but two coat

Preparation of plastered/unplastered wall surfaces and applying two coats of premium acrylic emulsion paint exterior weather coat, complete all as specified and directed.

M&L for preparation of plastered/unplastered wall surfaces and applying one coat of exterior acrylic emulsion paint (finished coat), including removing existing nails, if any, any Nos and filling the disturbed /uneven surface, holes/voids with wall care putty/POP/white cement where ever necessary to achive the smooth surface, complete all as specified and as directed.

M&L for preparation of old surfaces (Plastered or unplasterd surfaces) and applying one coat of cement base paint to walls complete all as specified and directed.

M&L for prepration of old surfaces (Plastered or unplasterd surfaces) and applying one coat of white (Lime) wash on ceiling complete all as specified and directed.

M&L for prepration of old surfaces (Plastered or unplasterd surfaces) and applying one coats of white (Lime) wash on walls complete all as specified and directed.

M&L for prepration of old wooden surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for prepration of old steel/iron surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for black background box of size exc 0.075 Sqm and n exc 0.15 Sqm, with white letter writing size exc 40mm but n. exc. 60 (Nos of letters 50 to 55) with syenthetic enamel paint over a coat of primer complete all as specified and directed.

Taking down cement plaster of any description thickness including raking out joints hacking for key scrubbing down with water all as specified. Note : The rate quoted by contractor is deemed to be included necessary steel/wooden scafolding and from work as required upto 12 Mtr height building complete all as specified and directed..

Material and labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished fair and even as in wall complete all as specified and directed.

M & L for applying 15 mm thick rendering using ready mix plaster bags in CM 1:4 on brick / concrete surfaces of external walls, finished even and fiar, complete all as specified and as directed. Note : 1. The rate quoted by contractor is deemed to be included necessary steel/wooden scafolding and from work as required upto 12 Mtr height building complete all as specified and directed.

M&L Rendering 5 mm thick in cement mortar (1:3), on fair faces of concrete surfaces, finished even and smooth, over and including fixing of chicken wiremesh with nails and set with cement slurry and paste before plastering on ceiling complete all as specified & directed.

Preparation of New plastered or unplastered surfaces of ceiling and applying two coat of white wash complete all as specified and directed.

Demolition of brick or stone boulder masonry built in cement mortar or cement lime mortar incl all quoins, arches, pillar etc but excluding ashlar facings, dressed stone works and precast concrete articles,complete all as specified and directed.

M&L brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and diretced.

M&L brick work (except bricks), old size, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and diretced.

Hacking out old broken glass ( any thickness, size, quality or description ) from frame or stone concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty or with wooden beads in square n.exc 0.5 sqm each panes complete all as specified and directed.

Dismantling /Taking down and removing existing roof treatment over roof slab including taking down existing PCC padding or plaster and hacking the top of RCC slab complete and Roughening surfaces of old concrete floor / roof by picking, sweeping, cleaning and washing down with water to remove dust,etc and disposal of rubbish off the premises complete all as specified and directed

Dismantling existing tanks, any capacity, setting aside (or lowering if required) and hoisting, reconnecting and refixing in position after repairs of roof complete all as specified and directed.

Taking down steel tubing and connections incl cleaning for refixing or removal from site for 20mm bore pipe complete all as specified and directed.

Refixing only 20 mm bore tubes, any grade, to walls and ceilings or laying in floors complete all as specified and directed.

Supply and fixing 20mm bore tubes medium grade galvanized with all fittings and fixed complete to walls and ceilings or laid in floors of any length complete all as specified and directed.

M&L for 40mm thick average thickness of PCC 1:2:4 type B-1 (using 20mm graded aggregate) as in padding or roof, finished even and fair without using extra cement.Complete all as specified and directed.

M&L 20mm thick cement plaster in CM 1:4 on roof surfaces including mixing with liquid water proofing compound @ 200ml per 50 kg of cement consumed or as per manufacturer's instructions, complete all as specified and dirtected.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for cleaning of concrete or plastered surfaces of roof and providing water proofing treatment with polymeric standard water proofing membrane, complete all as specified and described as under :- (a) Preparation of surface and applying one tack coat of polymeric modified bitumen 85/25 @ 1.2 Kg/Sqm over a priming coat of cold bituminous primer @ 0.30 kg / sqm. (b) Supply & providing APP modified polymeric water proofing membrane 3 mm thick of weight not less than 3.60 kg / sqm reinforced with polyester non-woven fabric (weight not less than 160 gms/Sqm) centre core including coating the surface with the compatible primer and torch application of membrane with minimum 10 cm overlaps in sides and 15 cmoverlaps in end as required thereof, complete all as specified and directed. (c) Applying one more coat of polymeric modified bitumen 85/25 @ 1.2 Kg/Sqm over which one coat of aluminium bituminous paint @ 0.20 Kg/Sqm shall be applied. Note:- The work of water proofing treatment shall be got executed throughh expert team of manufacturers or authorised applicator of manufacturer.

Supply & fix in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified & directed.

M&L for dismantling/taking down old dilaped/broken RCC chajja, facia, dropwall, roof projection, shelf/rack etc and repairing/re-casting of the same with reinforced cement concrete type B1,1:2:4(20mm graded stone aggregate), including necessary formwork, scaffolding and TMT steel reinforcement if required, upto four storeys and making surface smooth and finish with PCC type B0, 1:2:4(using 12.5mm graded aggregate) as in fillet, rendering 5mm thick in cm 1:3 on soffit with drip course and 10mm thick rendering in cm 1:4 for concrete surface with WPC after strucking off formwork, area not exc 2.0 Sqm each, including removal of deberies from the site and disposed out side the the MD land, complete all as specified and directed. Note:- Steel reinforcement whenever used will be measured and paid separately under respective items)

M & L Mild steel TMT bars 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for RCC articals, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall with and including suitable clamps complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall with and including suitable clamps complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair bib tap cast copper alloy, chromium plated suitable for 15mm bore iron pipe with long body fancy type complete fixed in rep. Make - Pearl/marc/Gem complete all as specified and directed.

S&F in repairs PVC waste pipe of 32 mm bore of suitable length for WHB/urinal/sink complete all as specified and directed.

S&F in repair transparent 6.3mm thick glass corner shelf of size 250mm radius, complete with CP grill, bracings/brackets and screws etc complete all as specified and directed.

S&F in repair glass shelf, 600 x 120mm, 5-6 mm thick complete with CP grill, bracings/brackets and screws etc complete all as specified and directed.

S&F in repair soap dish/plate , 3mm thick stainess steel of size 300 x 100mm, fancy type , with impression/mould for soap, paste etc alongwith adequet perforations, holes for tooth brush fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed.

S&F in repair PVC mirror cabinet of aprooved make, white/coloured with Modiguard/saintgobin mirror size 12cm depth, 31cm width, 54cm height complete all as specifeid and directed.

S&F in repair 18/19 mm thick, prelaminated particle board, ISI marked, interior grade, prelaminated both sides with decorative choice laminations, fixed with screws to timber frame work for doors, partitions, on wall, in cup boards//kitchen cabinets etc., in shelves, partitions and shelves of built in cup board, almirah, book case, toilet boxes, racks, pelmets etc. and similar works complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanized, width of flaps (when open) 30 mm complete all as specified and directed.

S&F 40 mm dia cupboard knobs of fixed with nut, screw and washer of mild steel, bright finished.

S&F ball catches with 8 mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified and directed.

M&L for second class soft wood plain fillets, of sectional area n. exc. 3 sqcm, square, rectangular or triangular in section, clean sawn, bull nosed, splayed, chamfered or rounded on one edge or face secured with nails or brads complete all as specified and directed.

S&F in repairs waste coupling of PTMT (half or full threaded) for 32 mm bore of discharge pipe, (Minimum weight-45 gms.) complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards / slabs / blankets any thickness including cover fillets complete all as specified and directed.

Supply and fixing for GI snap grid frame work of size 605 x 605 mm, for false ceiling comprising 40 x 25 x 2mm GI angles weight 0.36 kg fixed all along the wall at ends and with GI main and cross tee of size 36.50 mm x 25 mm x 1.4 mm weight not less than 0.24 kg per RM including GI cleat bolts nuts and washers and 2mm dia GI wire suspenders in alternates panel and preparing holes / chases in wall for fixing angle including fixing suitable for non asbestos fibre cement boards in ceiling including 4 mm thick, non-asbestos ceiling boards as per approved make of size 600 x 600 mm, fixed or laid / inserted to timber / GI / Aluminium frame work with screws in ceilingcomplete all as specified and directed.

S&F for lnsulated PVC hollow Wall Lining consisting of PVC Panels having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing PVC Insulated Panel with Single Side Prelam PVC sheet used instead of plain colour sheet thickness of insulated insulated PVC wall PVC wall lining 12 mm any description, fixed in any position with nailscomplete complete all as specified and directed.

Disconnecting & taking down existing water tank any type annd S&F rotational moulded polyethylene water storage tanks 500 liter capacity (cylindrical vertical with closed top) with and including PVC ball valves, high pressure with polythene float and fly nut complete screwed for 20 mm bore iron pipe or for brass ferrule, hoisted and fixed in position all as specified in SSR Part I 2009 complete all as specified & directed.

All as item No 55.00 here-in-before but water storage tanks 1000 liter capacity.

M&L for cutting and completely removing of bushes, small trees, vegetation (Peepal, small plants etc) growth alongwith its roots on building wall/roof/chhajja/parapet wall/water tank staging area etc or like of any dia and girth at any height by necessary demolition of brick, concrete, plaster portion if required and filling holes on and making good disturbed surfaces to match with existing surface with cement mortar 1:4 with and including WPC and PCC 1:2:4 as per site requirement, complete all as specified and directed.

M/S KAPIL ENTERPRISES (BID ID -3335967)

M/s D.K.Enterprises (BID ID -3342984)