REPAIR MAINTENANCE OF STREET LIGHT HIGH MAST LIGHT MID MAST LIGHT AND ALLIED WORKS UNDER GE (WEST) JABALPUR

Amount

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth , for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, laying of cables etc. n exc 10sqm on plan and n exc 1.5m in depth and getting out in any type of soil

M&L for sand cushioning to underground cable providing with a layer 8 cm before laying and 15 cm after laying, jointing and testing the cable all as specified and directed. Note: Punned thickness of sand shall be measured.

supply and laying the Brick covering with width equal to length of brick as mechanical protection to cable with well burnt sub class ‘B’ bricks laid dry flat complete all as specified and directed by Engr in charge.

Removing excavated material to a distance n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed.

Returning , filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Repair and maintenance of street light / perimeter light / security light / Garden lights/ flood light fitting HPSV/LED any type/make installed on LT / HT poles, building by means of replacing any unserviceable parts as and when required complete with labour including taking down, dismantling, reassembling and re-fixing the fitting at its original location with proper alignment and making good all defects including replacing of nuts/bolts/PVC connections etc and keep the light fitting in working condition through out the period of contract at one time payment complete all as specified and directed. Note :- Defective / worn out parts/ fittings measured and paid seperately as supply only relevant items.

Repair and maintenance of High mast light fitting any type/make installed on 12/15 mtr pole by means of replacing any unserviceable parts as and when required complete with labour including taking down, dismantling, reassembling and re-fixing the fitting at its original location with proper alignment and making good all defects by replacing nuts/bolts/PVC connection etc and keep the light fitting in working condition through out the period of contract and one time payment shall be made for the same complete all as specified and directed. Note :- Defective / worn out parts/ fittings measured and paid seperately as supply only relevant items.

Repair and maintenance of mid mast light fitting any type/make installed on HT poles,by means of replacing any unserviceable parts as and when required complete with labour including taking down, dismantling, reassembling and re-fixing the fitting at its original location with proper alignment and making good all defects by replacing nuts/bolts/PVC connection etc and keep the light fitting in working condition through out the period of contract and one time payment shall be made for the same complete all as specified and directed. Note :- Defective / worn out parts/ fittings measured and paid seperately as supply only relevant items.

S&F in replacement of GI pipe bracket ,made out of GI pipe 40mm dia light grade 1.5mtr long bend to the shape 120 degrees angle all as per site requirement including MS clamps made of F1 50x6mm complete with nuts, bolts & washer as per requirement for mounting fittings.

Supply, fixing and connecting PVC insulated, round,sheathed, multicore, industrial flexible cable with bright annealed copper conductor, 1100 volts grade cable of size1.5sqmm, 3 core, confirming to IS 694-1990 complete all as specified and directed

Supply, fixing in repair LED top post lantren, decorative luminaire with diffuser, 240 volts, 50 Hz, 25 watts with mounting arrangement incl taking down of existing fitting complete all as specified and directed by the Engr-in-charge, Make : Cat part No. RUBYPT25WLED757SSYMTOPC of Havells or equivqlent Philips/LUKER/Halonix

Supply, fixing in repair LED top post lantren, decorative luminaire with diffuser, 240 volts, 50 Hz, 25 watts with mounting arrangement incl taking down of existing fitting complete all as specified and directed by the Engr-in-charge, Make : Cat part No. VICTORIAPT35WLED757PSYMTOTG of Havells or equivqlent Philips/LUKER/Halonix

Supply, fixing in repair LED street light fitting 35 Watt having LED as light source, pressure die cast alluminium housing and lens embedded PC cover having IP-66 protection, IK07 with 10kV surge Built in Surge protection device, heat sink, operating voltage range 140-270 voltage, system efficay >100lm/W,CRI >70%, THD<10%, complete all as specified and directed by the Engr - in - charge. Make - ENDCITYITPLLAT+SL35WLED757SASYBOPCWOSPD of Havells or equivalent Luker/Philips/Wipro/Halonix

Supply, fixing in repair LED street light fitting 45 Watt having LED as light source, pressure die cast alluminium housing and lens embedded PC cover having IP-66 protection, IK07 with 10kV surge Built in Surge protection device, heat sink, operating voltage range 140-270 voltage, system efficay >100lm/W,CRI >70%, THD<10%, complete all as specified and directed by the Engr - in - charge. Make - ENDURASUNDOWNSL45WLED765PASYBOPC of Havells or equivalent Luker/Philips/Wipro/Halonix

Supply, fixing in repair LED street light fitting 60 Watt having LED as light source, pressure die cast alluminium housing and lens embedded PC cover having IP-66 protection, IK07 with 10kV surge Built in Surge protection device, heat sink, operating voltage range 140-270 voltage, system efficay >100lm/W,CRI >70%, THD<10%, complete all as specified and directed by the Engr - in - charge. Make - ENDURAPEARLNEOSL60W LED757PASYBOPCAST of Havells or equivalent Luker/Philips/Wipro/Halonix

Supply, fixing in repair LED street light fitting 72 Watt having LED as light source, pressure die cast alluminium housing and lens embedded PC cover having IP-66 protection, IK07 with 10kV surge Built in Surge protection device, heat sink, operating voltage range 140-270 voltage, system efficay >100lm/W,CRI >70%, THD<10%, complete all as specified and directed by the Engr - in - charge. Make - ENDURAOMNIPLUSSL 72WLED 757SASYTOPC of Havells or equivalent Luker/Philips/Wipro/Halonix

Supply, fixing in repair LED street light fitting 90 Watt having LED as light source, pressure die cast alluminium housing and lens embedded PC cover having IP-66 protection, IK07 with 10kV surge Built in Surge protection device, heat sink, operating voltage range 140-270 voltage, system efficay >100lm/W,CRI >70%, THD<10%, complete all as specified and directed by the Engr - in - charge. Make - ENDURAOMNIPLUSSL90WLED757SASYTOPC of Havells or equivalent Luker/Philips/Wipro/Halonix

Supply, fixing in repair LED flood lights, 100 watt, having high power LED and unique flood optics to enusre uniform distribution system, colour temperature cool white (5700K), system efficay >100 lm/watt, pressure die cast aluminium housing, integrated electronic driver, IP-66, Class I complete all as specified and directed by the Engr-in-charge, Make- Cat part No. JETAIRSFL100WLED757ARWBLTG of havells or equivalent Philips/Luker/Wipro/Halonix

Supply, fixing in repair LED flood lights, 180 watt, having high power LED and unique flood optics to enusre uniform distribution system, colour temperature cool white (5700K), system efficay >100 lm/watt, pressure die cast aluminium housing, integrated electronic driver, IP-66, Class I complete all as specified and directed by the Engr-in-charge, Make- Cat part No. JETALOURFL180WLED757PINTNBLTG of havells or equivalent Philips/Luker/Wipro/Halonix

Supply and fixing in repair 40W Solar street light fitting made with high efficiency mono crystalline solar PV module, Lithium Ferro Phosphate battery with in-builts BMS technology, High efficacy LED, MPPTsolar charge controller and alluminium extrudded body with inteligent microwave sensor to controlling the dimming and brightness, system efficacy >150 lm per watt, IP-66 protection, IK07 with 10kV surge Built in Surge protection device including nut bolt, brackets annd sutaible for existing 9 mr LT pole complete all as specified and directed by Engr -in charge. Make:- cast part No. Solar AIO ALFA 40 W of Havells or equivalent Philips/wipro/Luker/Halonix

Dismantling/ taking down of existing street light switching system and Supply, fixing, connecting and testing of Automatic Street light switch using infrared Sensor based Nature Switch for automatic switching of street lights, Nature switch operation should be based on Natural light lux level. Required illumination level for switching on is < 30 lux and for switching off > 10 lux. The sensor should also have part night operation facility for 4 - 12 hours. The sensor alongwith suitable power contactor, incoming-outgoing MCBs should be enclosed in a pole/wall moutaed enclosure made out of Rust proof, electric shock proof, termite proof and FR grade SMC junction box conforming to IP-54, The circuit should be suitable enough to take 8 kw Three phase load with contactor 25 Amps conforming to IEC-60947-4-1/IS-13947-4-1 & incoming and outgoing MCBs of rating 32 Amps conforming to IEC-60898/IS-8828 and circuit wiring of minimum 10sqmm copper conductor wire in and including providing of 50x6mm flat iron clamp, necessary nuts and bolts, complete all as specified and directed by the Engr-in-charge. Make of nature switch - Model No Swadeep-02EC8kw3P of Kakatiya Energy System or equivalent make of Bajaj/Healer, Make for Contactor- BCH/L&T/Schneider, Make of MCBs- Hager/Schneider/L&T/C&S, Enclouser - Sintex or equivalent

Supply and fixing in repairs non dimmable LED lamp 7 watt, B22 base, 6500K, 600 lumen complete Make Philips or equivalent model of Havells, Crompton Greaves

Supply and fixing in repairs non dimmable LED lamp 45 watt, B22 base, Lumen flux -4500lm, CCT-6500K,PF>0.90 complete Make Philips or equivalent model of Havells, Crompton Greaves

Supply and fixing in repairs Holder B-22 base, Plastic body, suitable for B-22 base 45 watt LED lamps Make Anchor, HPL, Plaza

Supply, laying or fixing or passing through pipe commissioning and testing of PVC XLPE insulated, armoured heavy duty, electric cable with aluminium conductor, 1100 volts grade, multi -stranded of SIZE 10SQMM 2 CORE including suitable size lugs including taking out /dismantling of existing cable. Note:- Excavation & earth work, sand cushioning, bricks protection & GI pipe where required shall be measured & paid separately under relevant items:-

Supply, laying or fixing or passing through pipe commissioning and testing of PVC XLPE insulated, armoured heavy duty, electric cable with aluminium conductor, 1100 volts grade, multi -stranded of SIZE 16SQMM 4 CORE including suitable size lugs including taking out /dismantling of existing cable. Note:- Excavation & earth work, sand cushioning, bricks protection & GI pipe where required shall be measured & paid separately under relevant items:-

Supply, laying or fixing or passing through pipe commissioning and testing of PVC XLPE insulated, armoured heavy duty, electric cable with aluminium conductor, 1100 volts grade, multi -stranded of SIZE 25SQMM 4 CORE including suitable size lugs including taking out /dismantling of existing cable. Note:- Excavation & earth work, sand cushioning, bricks protection & GI pipe where required shall be measured & paid separately under relevant items.

S&F in repairs GI Tubes, 40MM bore, light grade ,galvanised , with clamp of 25x3 flat iron welded to pipe fixed to wall/pole/ceiling or laid in floors or under road etc complete all as specified and as directed.

Drilling (Horizontally) existing road ( Maximum 10 mtr wide) suitable for passing GI tubing upto 80/100mm complete all as specified and directed.

Trimming of tree branches Clearing of LT/HT line 4 mtr all around by cutting tree branches at ground level of any numbers and any girth on any numbers of conductors/earth wire complete all as specified and directed by Engr in charge.

Supply and fixing in repairs MCCB 4 pole 100 Amps rupturing capacity 16 KA, with connecting links on LT panel/feeder pillar including dismantling/taking down existing unserviceable MCCB complete all as specified and directed.

Supply and fix in repairs junction box made out of polycarbonate with IP 55/IP 65 protection of size 200 x 160 x 98 mm, 5 way having terminals for termination of cable with necessary nuts and bolts ,Make - Hansal including -02 Nos polycarbonate cable gland Make :Hansal, 01 Nos DIN rail for mounting of MCB and 01 No, MCB SP, 10 KA, 6 Amps Make - Legrand in and including fixing clamp of FI 50 x 6mm with necessary nuts and bolts complete in and including taking down of existing u/s junction box of any type all as directed.

S&F in repairs 3 Layer PPR Pipes, UV stabilised having thermal stability upto 93 degree centrigrade complete and fixed with the pole by providing FI clamps, nuts and bolts of size 25x25x3mm with nuts & bolts for protection of connecting wires, connection from junction box to light fittings, complete for outer dia 20 mm (PN-16) Make : SFMC / WET FLOW /AQUA

Supplying and fixing in repairs 1100 volts grade heavy duty cable PVC insulated aluminium conductor 10 sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular. Make - Plaza/Polycab/ Finolex

S&F in repairs installation of weatherproof construction panel IP 44/65 made of poly carbonate or thermoplastic shok and rustproof fire resistant junction box should havee IEC 60439-1 and 60439-2 with the arrangemnts 4 outgoing TP and other side 4 out going SP construction panel with suitable size of plug top complete with fixing arrangents all as required at site or directed by Engineetr in charge Make :Legrand /Hensel/ Schnider/Havells

S&F in repairs contactor three phase 32 A, Thermal Overload relay suitable for street light operation complete all as specified & directed.

S&F in repairs contactor single phase 32 A, Thermal Overload relay suitable for street light operation complete all as specified & directed.

S&F in repairs SPD for LED light singe phase (1P+N) 25 KA,complete all as specified & directed.

Supply & Fixing in repairs driver suitable for 20-25 Watt existing LED Street light fitting of Make (Philips, Bajaj, C&S, Wipro) as required at site and directed by Engr in Charge driver make of driver : As per existing fitting on site.

Supply & Fixing in repairs driver suitable for 35-60 Watt existing LED Street light fitting of Make (Philips, Bajaj, C&S, Wipro) as required at site and directed by Engr in Charge driver make of driver : As per existing fitting on site.

Supply & Fixing in repairs driver suitable for 70-90 Watt existing LED Street light fitting of Make (Philips, Bajaj, C&S, Wipro) as required at site and directed by Engr in Charge driver make of driver : As per existing fitting on site.

Supply & Fixing in repairs LED module with LED complete suitable for 20-25 Watt existing LED Street light fitting of Make (Philips, Bajaj, C&S, Wipro) as required at site and directed by Engr in Charge, make of LED module with LED : As per existing fitting on site.

Supply & Fixing in repairs LED module with LED complete suitable for 70-90 Watt existing LED Street light fitting of Make (Philips, Bajaj, C&S, Wipro) as required at site and directed by Engr in Charge, make of LED module with LED : As per existing fitting on site.

TRISHLA CONSTRUCTIONS

Sachdeva Enterprises

RAVINDRA ELECTRICAL

RAINA SALES AND SERVICES

shri krishna traders