Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.3 CrAccepted-AOC | ₹1.3 Cr Quoted ₹1.4 Cr | L1 | Accepted-AOC Work awarded to lowest contractor. Hence, EMD may be released in favour of the Contractor. |
| 2 | L-2₹1.4 Cr+₹7,558.45 (0.06%)Rejected-Finance | ₹1.4 Cr+₹7,558.45 (0.06%) | L-2 | Rejected-Finance Due to 2nd lowest |
Tender Value
₹1.3 Cr
EMD Value
₹2.6 L
Closing Date
7 May 2023, 5:30 pmClosed
Executive Engineer
Executive Engineer, Kalpa Divison, HPPWD Kalpa
C/O Primary School Building at Kalpa in Distt. Kinnaur HP (SH- Building portion, WS and SI, C/O Septic Tank and rain water harvesting system
2023_PWD_72546_2
PW/KNR-E-tender-22-248-56 dt. 18-04-2023
Open Tender
Civil Works - Buildings
Item Rate
730 days
Kalpa
Please refer Tender documents.
6 documents required · 6 mandatory
₹5,000
₹2.6 L
30 Aug 2023
28 Apr 2023
8 May 2023
28 Apr 2023
7 May 2023
28 Apr 2023
Amount
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains, including dressing of sides and ramming of bottoms, including getting out the excavated soil and disposal of surplus excavated soil as directed. All kinds of soil, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Supplying and filling in plingh with sand under floors, including watering, ramming, consolidating and dressing complete including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Centering and shuttering including strutting, propping etc. and removal of form, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Suspended floors, roofs, landings, balconies and access platform
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
Stairs, (excluding landings) except spiral stair cases
Edges of slabs and breaks in floors and walls.
Lintels, beams, plinth beams, girders, bressumers and cantilevers
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (one cement : five coarse sand: ten graded stone aggregate 40 mm(fourty millimeter) nominal size), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth levels, 1:4:8 (one Cement : four coarse sand : 8 graded stone aggregate 40 mm(fourty milliteter) nominal size), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (one Cement : two coarse sand) : four graded stone aggregate 40 mm(fourty millimeter) nominal size), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (one cement : one point five coarse sand) : three graded stone aggregate 20 mm (twenty millimeter) nominal size), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth level up to floor in :Cement mortar 1:6 (one cement : six coarse sand), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level Cement mortar 1:4 (one cement :four coarse sand), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (one cement : six coarse sand : twelve graded stone aggregate 20 mm(twenty millimeter) nominal size) at window sills, ceiling level and the like. Cement mortar 1:6 (one cement : six coarse sand), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (one cement : six coarse sand), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Cement concrete flooring 1:2:4 (one cement : two coarse sand : four graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm (fourty millimtere) thick with 20 mm( twenty millimeter) nominal size stone aggregate, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing woodwork in frames of doors, windows, clerestory, windows and other frames wrought, framed and fixed in position in all floors, 2nd class Deodar wood, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing woodwork in trusses, purlins, rafters, posts, post plates, wall plates and the like wrought framed, hoisted and fixed in position, 2nd class Deodar wood, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm (twenty five milimeter into forty milimeter) thick : 2nd (second) Class deodar wood, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters, 35 mm (thirty five millimeter) thick including ISI marked Stainless Steel butt hinges with necessary screws, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing 40mm(fourty millimeter) thick battened and framed door shutters including bright finished or black enamelled iron hinges with necessary screws. 2nd class deodar wood, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm(zero point five millimeter) and average width of aperture 1.4 mm(one point four millimeter) in both directions for doors, windows and clerestory windows with necessary screws 35 mm(thirty five millimeter) thick shutters, second class deodar wood, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing plain multipurpose cement board(High pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately). 6 mm (six millimeter) thick Cement fiber board as per IS: 14862, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing wooden plank ceiling with planks over lapping each other and jointed with wood screws (frame work to be paid for separately). 1st class deodar wood 12mm(twelve millimeter), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing eaves board 100mmx25mm(one hundred into twenty five millimeter) thick including fixing in position 2nd class Deodar wood, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete, Fixed to steel windows by welding, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
300x16 mm (Three hundred into sixteen millimeter)
250x16 mm (two hundred fifty into sixteen millineter)
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
300×10 mm(three hundred into ten millimeter)
250×10mm (two hundred fifty into ten millimeter)
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
125 mm(one hundred twenty five millimeter)
100 mm(one hundred millimeter)
75 mm (seventy five millimeter)
Providing and fixing chromium plated brass handles with necessary screws complete : 75 mm(seventy five millitere) including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing bright finished ball cattcher 10mm(ten millimeter) dia. , including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing bright finished brass hard drawn hooks and eyes, 100 mm(one hundred millimeter), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Particle board bwp phenol bonded exterior/interior grade in partitions: 8mm(eight millimeter). all complete as per the direction of Engineer-in-charge, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing 19mm(nineteen millimeter) thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing 1.00mm(one point zero millimeter) thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood 50x12 mm(fifty into twelve millimeter), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS :15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approvedby Engineer-in-Charge in skirting, risers of steps and dados over 12 mm(twelve millimeter) thickbed of cement Mortar 1:3 (one cement: three coarse sand) and jointing with grey cement slurry @ 3.3kg(three point three kilogram) per sqm including pointing in white cement mixed with pigment of matching shade complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and laying rectified glazed ceramic floor tiles of size 300х300 mm(three hundred into three hundred millimeter) or more (thickness to be specfied by the manufacturer), of 1st quality confirming to IS: 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20mm(twenty millimeter) thick cement mortar 1:4(one cement : four coarse sand ), jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with cement and matching pigments etc., complete. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing 2 mm (Two millimeter) thick pvc/rubber tiles flooring plain, coloured. corbed or mosaic or mattled finish, laid with approved adhesive on sub floor damp proofing treetment(to be measured separately) for payment, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and laying 60mm (sixty milimeter) thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm (fifty milimeter) thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Ceramic tile in skirting laid on 12mm(twelve millimeter) thick cement mortar 1:3(one cement : three sand) and jointed with cement slurry, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and laying local slate 40mm (fourty millimeter) thick shetring of dedo laid on 12mm (twelve millimeter) thick cement mortar 1:3(one cement: three sand) and jointed with gray cement slurry, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and laying local slate flooring laid in cement mortar 1:4 (one cement : four sand) and jointed with gray cement slurry, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing ridges or hips 60 cm (sixty centimeter) overall in plain G.S. sheets fixed with polymer coated J or L hooks, bolts & nuts 8mm (Eight millimeter) dia G.I. limprt and bitumen washers complete:0.63mm (zero point six three millimeter) thick with zinc coating not less than 275 gm/m²(two hundred seventy five gram per meter square), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing valleys 90(ninety) cm overall in plain G.S. sheets fixed with polymer coated J or L hooks, bolts and nuts 8mm dia (eight milimeter diameter) G.I. limpet and bitumen washers complete 1.60mm(one point six zero millimeter) thick with zinc coating not less than 350 gm/m²(three hundred fifty gram per meter square) complete, includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm(ten millimeter) gap for thermal expansion, (i) Single socketed pipes, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing M.S. BP Sheet 1.66mm (one point sixty six millimeter) to 20mm (twenty millimeter) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Slate roofing with 7.5 cm(seven point five centimeter) Single lap single layer fixed on wooden batten(wood work to be paid for separately).With slates 40x20 cm(fourty into twenty centimeter) size, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing polycarbonated tranparent sheet 1.20mm (one point twenty millimeter) thick in roofing with galvanised J or L hooks bolts and nuts with G.I Limpe and bitumen rubber washer complete with all accessories as required as per direction of Engineer-in-charge, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm(twenty into ten into two millimeter) and braced with flat iron diagonals 20x5 mm(twenty into five millimeter) size, with top and bottom rail of T-iron 40x40x6 mm(fourty into fourty into six millimeter), with 40 mm(fourty millimeter) dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm(zero point nine zero litre per ten square meter) over an under coat of primer applied @ 0.80 ltr/ 10 sqm(zero point eight zero litre per ten square meter) of approved brand and manufacture, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Applying priming coat With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm(zero point nine zero litre per ten square meter) over an under coat of primer applied @0.75 ltr/10 sqm(zero point seven five litre per ten square meter) of approved brand and manufacture, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
6 mm(six millimeter) cement plaster of mix 1:3 (one cement : three fine sand), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
15 mm (fifteen millimeter) cement plaster on the rough side of single or half brick wall of mix : 1:6 (one cement: six fine sand), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Distempering with synthestic /acrylic distemper 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.Two or more coats on new work, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm) (three point eighty four killograme/ten square meter), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade.Two or more coats on new work, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Making plinth protection 50mm thick of cement concrete 1:3:6 (one cement : three coarse sand (zone - III) : six graded stone aggregate 20 mm(twenty millimeter) nominal size) over 75mm(seventy five millimeter) thick bed of dry brick ballast 40 mm(fourty millimeter) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing green board for class room with superior quality including all fitting and standard size, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing U-shape drain 23 cm(twenty three centimeter) thick half round stone ware pipe, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (one cement : two fine sand) including testing of joints etc. complete : 300 mm dia (three milimeter diameter). R.C.C. pipe, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
PN-16 Pipe, 15mm(fifteen millimeter) OD (SDR-7.4)
PN-16 Pipe, 20mm(twenty millimeter) OD (SDR-7.4)
Constructing masonry Chamber 30x30x50cm(thirty into thirty into fifty centimeter), inside in brick work in cement mortar 1:4 (one cement : four coarse sand) for stop cock, with C.I. surface box 100x100х75 mm(one hundred into one hundred into seventy five millimeter)(inside) with hunged cover fixed in cement concrete slab 1:2:4 mix (one cement : two coarse sand : four graded stone aggregate 20 mm(twenty millimetre) nominal size) and inside plastering with cement mortar 1:3 (one cement : three coarse sand) 12 mm(twelve millimeter) thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing PVC floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. 110 mmX75 mm(one hundred ten into seventy millimeter), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing & fixing White vitreous china water closet squatting pan (Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge Orissa pattern W.C Pan of size 580x440 mm(five hundered eighty into four hundred fourty millimeter), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10(ten) litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm(fourty millimeter) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm (four hundred thirtry into two hundred sixty into three hundred fifty ) or 340x410x265 mm ( three hundred forty into four hundred ten into two hundred sixty five millimeter) sizes respectively, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing wash basin with C.I. brackets, 15 mm(fifteen millimeter) C.P. brass pillar taps, 32 mm(thirty two millimeter) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 630x 450 mm(six hundred thirty into four hundred fifty millimeter) with single 15 mm(fifteen millmieter) C.P. brass pillar tap, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing vitreous China pedestal for wash basin complete recessed at the back for the reception of pipes and fittings, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm (forty milimeter) including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board, 610x460 mm (six hundred ten into four hundred sixty milimeter) bowl depth 200, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing 100 mm(one hundred millimeter) sand cast Iron grating for gully trap, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing 600x450mm(six hundred into four hundred fifty millimeter) beveled edge mirror of superior glass (of approved quality) complete with 6 mm(six milimeter) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour, 600 mm (six hundred millimeter) long towel rail with total length of 645 mm (six hundred forty five millimeter), width 78 mm (seventy eight millimeter) and effective height of 88 mm (eighty eight millimeter), weighing not less than 190 gms (one hundred nintey grames), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing PTMT soap Dish Holder having length of 138mm(one hundred thirty eight millimeter), breadth 102mm(one hundred two milimeter), height of 75mm(seventy five millmeter) with concealed fitting arrangements, weighing not less than 106 gms(one hundred six gram), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing C.P brass bib taps with capstan head weigth 400 gms(four hundred gram) . 15mm(fifteen millimeter) dia. , including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing C.P Brass pillar tap with capstan head, 15mm(fifteen millimeter) dia., including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing brass stop cock of approved quality : 15 mm(fifteen millimeter) nominal bore, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make, 15mm (fifteen millimeter) as approved by Engineer-in-charge, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm(fourty five centimeter) length 15 mm(fifteen millimeter) nominal bore, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing ISI marked high pressure PVC spigot and socket, waste and ventilating pipes including fixing with approved adhesive etc. complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
150 mm dia.(one hundred fifty millimeter)
110 mm dia.(one hundred ten millimeter)
75 mm dia.(seventy five millimeter)
Providing and fixing PVC single equal branch with oval access door, insertion rubber washer 3 mm(three millimeter) thick bolts and nuts complete including fixing with approved adhesive etc. complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
150 mm dia.(one hundred fifty millimeter)
110 mm dia.(one hundred tne millimeter)
75 mm dia.(seventy five millimeter)
Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm(three millimeter) thick bolts and nuts complete including fixing with approved adhesive etc. complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
150 mm dia.(one hundred fifty millimeter)
110 mm dia.(one hundred tne millimeter)
75 mm dia.(seventy five millimeter)
Providing and fixing PVC collar including fixing with approved adhesive etc. complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
150 mm dia.(one hundred fifty millimeter)
110 mm dia.(one hundred tne millimeter)
75 mm dia.(seventy five millimeter)
Providing and fixing PVC plain bend including fixing with approved adhesive etc. complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
150 mm dia.(one hundred fifty millimeter)
110 mm dia.(one hundred tne millimeter)
75 mm dia.(seventy five millimeter)
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10(ten) litre capacity - White, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing CP Brass 32mm (thirty two millimeter) size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Constructing brick masonry manhole in cement mortar 1:4(one cement : four coarse sand )with R.C.C. top slab with 1:1.5:3 mix(one cement : one point five coarse sand (zone- III) :three graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix(one cement : four coarse sand (zone- III) : eight graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3(one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded stoneaggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside 90х80(ninety into eighty)cm and 45(fourty five)cm deep including C.I. cover with frame(light duty) 455х610(four hundred fourty five into six hundred ten)mm internal dimensions, total weight of cover and frame to be not less than 38 kg(thirty eight kilogram)(weight of cover 23kg and weight of frame 15kg).with common brunt clay F.P.S.(nonmodular)bricks class desiganation 7.5, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Sanjeev thakur
stage.html
html • 0.04 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .