MAINTENANCE OF VARIOUS TYPES OF STEEL AND WOODEN FURNITURE AT GRC, MH, NCC OTA, APS, 414 TA AND 52 ASC UNDER GE KAMPTEE

Amount

LOCKER BED SIDE STEEL FD-1029

Removing of old unserviceable hasp and staple and supply & fixing of new CP Hasp and Staple 75mm long as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable stainless steel handle and supply & fixing of new stainless steel handle 100mm long with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable MS shelf made to shape out of 1mm thick MS sheet and supply & fixing of new MS shelf made to shape out of 1mm thick MS sheet fxing bolts or welding as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable leg of size 600mmx80mmx100mm and supply & fixing of new leg of size 600mmx80mmx100mm made out of 1mm thick MS sheet fxing bolts or welding as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable MS shutter made to shape and supply & fixing of new MS shutter made out 1mm thick to shape as per given in drawing and site requirement complete all as specified and directed.

BOOK CASE STEEL (GLASS DOOR) FD-1028, FD-237, WDF-2, FD-90(M)

Removing unserviceable MS channel and supply and fixing new MS channel complete including necessary welding and roller all as per drawing and as directed.

Removing unserviceable 3 mm thick plain glass with cleat stopper and S&F new 3 mm plain glass with iron cleat stopper all as per drawing and as directed

Removing unserviceable sliding shutter and supply and fixing new sliding shutter of 1 mm thick MS sheet including glass , lock and two handles all as per drawing as directed.

Removing unserviceable locks and supply and fixing new lock with duplicate keys as per drawing and as directed

Removing unserviceable handles and supply and fix new handles of 100 mm all as per drawing and as directed

Removing unserviceable shelves and supply and fix new shelves of 1 mm thick MS sheet with existing matching colour all as per drawing and as directed

CHAIR CBA OFFICE STEEL WITH ARMS:- FD-75(M)

Dismantling of existing UNSV seat of chair CB office steel with arms and supply and fixing new seat of teak wood duly canning with plastic cane 2mm wide half round providing 3mm wide flat cane border around the seat and french polishing in black Colour on wooden surface all as approved and as specified and shown in drg canning shall be done in Godrej pattern.

Dismantling of existing UNSV back of chair CB office steel with arms and supply and fixing new seat of teak wood duly canning with plastic cane 2mm wide half round providing 3mm wide flat cane border around the seat and french polishing in black Colour on wooden surface all as approved and as specified and shown in drg canning shall be done in Godrej pattern

Dismantling of existing UNSV broken cleats and supply and fixing of new MS flat Iron 25x3mm and 535mm long two Nos by welding complete all as specified and directed and shown in drg.

Removing of Old/UNSV armrest and supply and fixing new arms rest of seasoned teak wood duly french polish in black colour etc complete all as specified and directed and shown in drg.

Repainting of steel frame with one coat of OG synthic enamel paint after scrapping/cleaning surface by sand paper for smooth painting complete all as specified and directed.

Supply and fixing PVC new Plug of approved quality by GE to chair tubler steel after removing existing UNSV.

TABLE DINING ORs ALUMINIUM TOP FD-165M

Removing of old unserviceable plywood, top of table dining ORs and supplying and fixing new 18mm thick commercial plywood top and covered with 1mm thick aluminium sheet complete all as specified & directed and as shown in drg.

M&L for preparation of old/new table dining ORs aluminium top and polishing of high gloss melamine polish of table dining ORs complete all as specified & directed.

Material and labour for preparing of old/new polished wood based furniture articles as per the following steps:- Step 1 Sanding:- The wood components shall be rubbed with sand paper No 120 along the grains to remove any dust/ wax/unwanted stains from the surface, the sanding will be repeated with sand paper between 180-220 grit in order to achieve the smooth surface and the wood will be wiped clean with soft clean cloth complete all as specified and directed. Steps 2 : Staining : Any cracks or holes shall be filled with wood filler of good quality. After the wood filler has dried completly sanding with a stain of approved shade will be then applied to the prepared surface with the help of a soft malmal cloth or brush along the grain'. two to three coats of staining will be done letting the stain dry completly between each coats and sanding every time very fine grit sand paper (220-320). NOTE: Excess stain should be wiped off before drying and getting absorbed in wood. Step 3 Polishing : Wood will be finished with a good quality french polish (mixture of shellac grains and methylated spirit in ratio 1:10) two to three coats shall be applied to prepared wood surface letting each coat to dry and absorbed fine sanding can be done if required, Polish shall be applied with a soft cloth/ brush along the grains and not against it to achieve high gloss complete all as specified and directed.

Table dining 04/06 person FD-273, FD-/MAP/-II/03

Table dining 8 person FD-273/239

Teapoy FD-34

Table writing FD-275/249

Table 3'x2' with drawer FD-283/224

Table 3'x2' without drawer FD-284/223

Table dressing ladies with mirror FD-251

Sofa 3 piece 5 seater FD-281/258

Peg Table FD-277

Side board FD-272

Chair writing FD-280/250

Chair easy FD-229/DB-3960

Chair dining FD-279/228

Table center FD-277

Hat stand with mirror FD-361/233

Sofa Set Four Seater FD-373

Table 3'x3' FD-88(M)/291

Bed Hard FD-245, FD-21(M)

Table office officer wooden DB-4149, WDF-32

Almirah Large Wooden F-21A, F-214, DB-4116

Table Bed Side FD-210//243/276

Material and labour for preparing of old/new polished/ Touchwood wood based Bentwood furniture articles as per the following steps:- Step 1 Sanding:- The wood components shall be rubbed with sand paper No 120 along the grains to remove any dust/ wax/unwanted stains from the surface, the sanding will be repeated with sand paper between 180-220 grit in order to achieve the smooth surface and the wood will be wiped clean with soft clean cloth complete all as specified and directed. Steps 2 : Staining : Any cracks or holes shall be filled with wood filler of good quality. After the wood filler has dried completly sanding with a stain of approved shade will be then applied to the prepared surface with the help of a soft malmal cloth or brush along the grain'. two to three coats of staining will be done letting the stain dry completly between each coats and sanding every time very fine grit sand paper (220-320). NOTE: Excess stain should be wiped off before drying and getting absorbed in wood. Step 3 Polishing : Wood will be finished with a good quality melamine polish (mixture of shellac grains and methylated spirit in ratio 1:10) / Touchwood two to three coats shall be applied to prepared wood surface letting each coat to dry and absorbed fine sanding can be done if required, Polish / touchwood shall be applied with a soft cloth/ brush along the grains and not against it to achieve high gloss complete all as specified and directed.

Chair Dining Bentwood FD-2005/08

Chair Writing Bentwood FD-2005/10

Chair Dining Officer FD/MAP/I/04

Table Writing Bentwood FD-2005/14

Sofa Set Four Seater Bentwood FD-2005/2&12

Sofa set 3 pic 5 Seater Bentwood FD-2005/02 & 12

Peg table Bentwood FD-2005/06

Table Centre 2 tier Bentwood FD-2005/15

Stool Dressing Bentwood FD-2005/13

Teapoy Bentwood FD/2005/06

Table Bed Side Bentwood FD-2005/19

Bed plywood top w/FMN (Double Bed) (BW) FD-2005/OH

Bed plywood top w/FMN (Single Bed) (BW) FD-2005/07

Table Dining 8 person Bentwood FD-2005/01

Hat stand w/mirror (BW) FD-2005/11

SOFA SET FIVE SEATER (BENTWOOD) CWE/NAG/FD-2009/02 & 12

Removing of old unserviceableb cushion foam and tapestry cloth from seat and back of sofa set 5 seater (bentwood) and supply and fixing new foam cushion 100mm thick & 40mm density for seat and 75mm thick & 32 density of size for back as per drawing, both cushions are covered with new tapestry cloth, cloth quality approved by GE complete all as specified & directed and as shown in drg.

M&L for preparation of old/new sofa single chair of 5 seater set and polishing of high gloss melamine polish of sofa single chair of 5 seater set complete all as specified & directed.

SOFA SET FOUR SEATER (BENTWOOD) CWE/NAG/FD-2009/02 & 12

Removing of old unserviceableb cushion foam and tapestry cloth from seat and back of sofa set 4 seater (bentwood) and supply and fixing new foam cushion 100mm thick & 40mm density for seat and 75mm thick & 32 density of size for back as per drawing, both cushions are covered with new tapestry cloth, cloth quality approved by GE complete all as specified & directed and as shown in drg.

M&L for preparation of old/new sofa single chair of 4 seater set and polishing of high gloss french polish of sofa single chair of 4 seater set complete all as specified & directed.

CHAIR DINING (BENTWOOD) FD-2005/08

Removing of old unserviceableb cushion foam and tapestry cloth from seat and back of chair dining in special type (bentwood) and supply and fixing new seat of foam cushion 50mm thick & 32mm density of size of foam 23" x 16" and back foam 50mm thick & 32 density of size foam 12" x 16" the foam of seat & back shall be covered with new tapestry cloth, cloth quality approved by GE complete all as specified & directed and as shown in drg.

M&L for preparation of old/new chair dining cushioned (bentwood) and polishing of high gloss french polish of chair dining cushioned ((bentwood) complete all as specified & directed.

CHAIR DINING OFFR FD/MAP/I/04

Removing of old unserviceableb cushion seat of chair dining (MAP) and supply and fixing new cushioned seat of chair dining (MAP) cushioned seat shall be made of 75mm thick & 40 density, cushion fixed on 12mm thick BWR ply which shall be rest on 75mm x 75mm x 25mm teak wood stoppers, stoppers to be fixed at four corners of main frame of chair complete all as specified & directed and as shown in drg.

M&L for preparation of old/new chair dining cushioned (MAP) and polishing of high gloss french polish of chair dining cushioned (MAP) complete all as specified & directed.

CHAIR WRITING (BENTWOOD) CWE/NAG/FD-2005/10

Removing of old unserviceable cushion seat and back of chair writing (bentwood) and supply and fixing new cushioned seat of chair writing (bentwood) cushioned seat shall be made of 600mm x 450mm x 75mm thick & 40 density, and back cushion shall be made of 450mm x 300mm x 75mm thick & 40 density, cushion fixed on 12mm thick BWR ply which shall be rest on 75mm x 75mm x 25mm teak wood stoppers, stoppers to be fixed at four corners of main frame of chair complete all as specified & directed and as shown in drg.

M&L for preparation of old/new chair dining cushioned (bentwood) and polishing of high gloss french polish of chair dining cushioned (bentwood) complete all as specified & directed.

CHAIR WRITNG OFFICER FD/E6/MAP/12

Removing old unserviceable Seat of chair writing offr and supply & fixing New seat of chair writng offr all as per drawing. Seat shall be made of 50 mm thick synthetic foam of 32 density fixed over 12 mm thick plywood commercial and shall be stitched with superior quality fabric cloth of approved shade as specified and directed.

Removing old unserviceable back of chair writing offr and supply & fixing new back of chair writing offr all as per drawing . Back shall be 25 mm thick respectively synthetic foam of 32 density fixed over 12mm thick plywood commercial and shall be stitched with superior quality fabric cloth of approved shade as specified and directed.

Removing old unserviceable cover cloth of (seat and back) from existing chair writing offr. S & F of new fabric cloth duly approved by GE, shall be used for seat and back of existing chair computer as specified and directed.

Removing old unserviceable Arms rest of chair writing offr and supply & fixing new arms rest of computer chair all as per drawing and directed. Note : Arm Rest shall be polyurethene "D" shape.

M&L for gas welding to frame of chair writing offr including preparation of surface and removing the unwanted welding spot complete all as specified and directed.

Material and labour for re-painting of mentioned below steel furnituire as per the following steps:- (a) Denting of bent surfaces with the help of hammer in best workmanship manner. (b) Removing old paint by scrubbing with sand paper 150 No thoroughly. (c) Applying one coat of metal primer. (Make Asian/Nerolac/Delux). (d) Applying metal putty to even surface.wait period 2-3 hours to be given for putty to set and dry completely. scrub off the excess putty with 150 No and paper and spraying little amount of water simultaneously. (e) Wipe the surface with solt dry cloth and apply one coat of enamel paint of light shade as approved by GE.

Almirah large steel with shelves. FD-1031/67

Almirah small steel with shelves. FD-1032/243

Locker bed side steel. FD-1029

Almirah large steel with glazed door. FD-104(M)

Rack adjustable stelel 6 tier FD/106/M

Table Bed Side Steel FD-157

Book Shelf FD-1028, 69(M)

Table dining OR's Aluminium Top FD-165(M)

Teapoy Verandah FD-35,255,121,383

Chair CBA steel with arms FD-120(M), FD-75(M)

Charpoy Hard Top (FD/MAP-II/01)

Supply and fixing of stiffener (including welding) made of 25 mm square MS pipe (16 gauge) in replacement of old unserviceable stiffener all as per drawing and as directed.

Supply and fixing of 12 mm thick plywood BWR grade type 'A' of size 1930x850mm confirming to IS -303 of 1975 (ISI marked) in replacement of old unserviceable plywood all as per drawing.

Supply and fixing of thick hard rubber shoes of size 32 mm square (Inner size) in replacement of unserviceable hard rubber shoe all as per drawing.

M&L for painting of frame of charpoy with hard top with two coats of synthetic enamel black paints including welding where required and preparation of surfaces

BED PLY TOP FD-246

Removing of old unserviceable head board plywood of bed ply top (both face) and re-fixing of new plywood 3mm thick complete all as specified & directed and as shown in drg.

Removing of old unserviceable foot board plywood of bed ply top (both face) and re-fixing of new plywood 3mm thick complete all as specified & directed and as shown in drg.

Removing of old unserviceable long rail size 35mm x 90mm of bed ply top and refixing of new first class hard teak wood long rail of size 35mm x 90mm complete all as specified & directed and as shown in drg.

Removing of old unserviceable short rail size 60mm x 60mm of bed ply top and refixing of new first class hard teak wood long rail of size 60mm x 60mm complete all as specified & directed and as shown in drg.

Removing of old unserviceable stiffner rail between to long rails size 40mm x 60mm of bed ply top and re-fixing of new first class hard teak wood stiffeners rail size 40mm x 60mm, made to shape complete all as specified & directed and as shown in drg.

Removing of old unserviceable bend to right angle MS flat iron of bed ply top and re-fixing of new MS flat iron size 35 x 5mm bend to right fixed to corner of bed ply top including preparation of new iron surface and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified & directed.

Removing of old unserviceable plywood of bed ply top and re-fixing of new best quality commercial type plywood 12mm thick complete all as specified & directed and as shown in drg.

M&L for preparation of old/new plywood of bed ply top and polishing of high gloss french polish of bed ply top complete all as specified & directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 73,170.00]

MISHON TRADING CORPORATION (BID ID -3469647)

SUNIL ENTERPRISE (BID ID -3471940)

VIJ ASSOCIATES (BID ID -3472156)

KASTURILAL HARICHAND OHRI AND SONS (BID ID -3471662)

M/S J J ENTERPRISES (BID ID -3477191)

M/s Raghav Traders (BID ID -3471917)

ASHOKA FURNITURES (BID ID -3471722)