Construction of balance work for 1000 mt controlled atmosphere storage/ cold storage at Agling.

Amount

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :

Dumping stone including cost of stones.in Horizontal on level

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand)

Dry random rubble masonry with hard stone in foundation and plinth: Without bond stone

Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete

Providing and laying in position specified grade of reinforced cement concrete includingcuring but excluding the cost of centering, shuttering, finishing and reinforcement. Allworks upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platforms.

Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size)

20mm Cement plaster of mix 1 : 4 ( 1 cement : 4 fine sand)

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete 40mm thick with 20 mm nominal size stone aggregate.

Providing and fixing PVC soil, waste and vent pipe including all CPVC plain and brass threaded fittings, this including jointing of pipe and fittings etc. 100mm dia pipes

Providing and fixing PVC soil, waste and vent pipe including all CPVC plain and brass threaded fittings, this including jointing of pipe and fittings etc. 75mm dia pipes

Constructing masonry Chamber of specified size, in brick work with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 (1cement :4 coarse sand) and R.C.C. top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design. For sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid. Chamber 60x60x75 cm

Providing and fixing 1st quality ceremic glazed tiles conforming to IS 13753 of minnium thickness 5mm of approved make like NITCO, ORIENT, SOMAYA, KAJARIA,or equivalent make in all colour, shade over 12mm thick bed of cement motar 1:3 and jointing with grey cement slurry @3.3kg per Sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown

Providing & fixing White vitreous china water closet squatting pan(Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Long pattern W.C Pan of size 580x440 mm

Providing & fixing White vitreous china pedestal type water closet (Europan type W.C. Pan) with seat and lid, 10 liter low and level white PVC flushing cistern, including flush pipe with manually controlled device ( handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making goods the walls and floors whenever required.W.C Pan with ISI marked with Solid plastic seat and lid.

Providing and fixing white vitreous china flat back or wall cornor type lipped front urinal basin of 430x260x350mm and 340x410x26.5mm size respecitively with automatic flushing costern with standard flush pipe and C.P. brass speaders with brass union and G.I. clamps compete, inclduing painting of fitings and brackets, cutting and making good the walls and floors wherever required. One urinal basin with 5 liter with PVC automatic flushing cistern.

Providing and fixing wash basin with C.I./M.I brackets, 15mm C.P. brass piller tapes, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls whereever required. White vitreous china wash basin size 450X300 mm with single 15mm C.P. brass piller tapes.

Providing and fixing white viterous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing salem stainless steel A ISI 304 (18/8) kitchen sink as per IS with brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the wall wherever required. Kitchen sink without drains board 610X460mm bowl depth 200mm.

Providing and fixing 100mm sand cast iron grating for gully, floor or Nahani trap.

Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings. PVC pipe 40mm dia

Providing and fixing mirror of superior glasss ( of approved quality) and of required shape and size with plastic moulded framed of approved make and shade with 6mm thick hard board backing Rectangular shape 453x357mm.

Providing and fixing 600X120X5mm glass shelfwith edges round of supported on anosized aluminium angle frame with C.P brass brackets and guard rail complete fixed with 40mm long screws, rawl plugs etc complete

Providing and fixing PVC bend of required degree.100mm dia

Providing and fixing PVC bend of required degree.75mm dia

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. PN-16 pipe , 25mm OD(SDR-7.4)

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. PN-16 pipe , 20mm OD(SDR-7.4)

Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms

Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing toilet paper holder, CP Brass

Providing and fixing PTMT towel rail complete with brackets fixd to wooden cleats with CP brass screwa with concealed fitting arrangement of approved quality and color.600mm long towel rail with total length of 645mm, 78mm wide and effective height of 88mm, weight not less than 190gms.

Providing and fixing PTMT Liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and color, weighing not less than 105 gms

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 100 mm diameter

Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge.

Providing and fixing Exhaust fan.

Providing and fixing gyser os approved quality (like crompton, jacquar, bajaj etc. or equivalent of 15 ltr capacity

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing K- Flex insulation to PPR'S pipes in internal walls.

Providing and fixing of insulation for bathroom pipe 1st layer of glass wool binded with wire mesh, K-Flex and cover with aluminium sheet all complete.

Prociding and fixing of Electrical heat tape with thermostate all complete.

Providing and fixing of insulation for sintex 1st layer of glass wool binded with wire mesh, black polythene sheet, nitrile insulation sheet and cover with aluminium sheet all complete job.

Carriage of material from source to site by Mechanical transport a) Cement and steel an avg lead of 3Kms

b) Sand an avg. lead of 15Kms

c) Aggragate an avg. lead of 15 Kms

Stone avg.laed of 20Kms

M/S TSEWANG YANGJOR GOVT CONTRACTOR