WBPHED /EE/AMD/NIeT-05 of 2024-2025/1

Amount

Supply and delivery of following materials at site:-

Digital ammeter Input 1A /5A (Programmable) Display : 14 mm LED Display 3Ph 3W/4W Network Accuracy Class : 1.0, 4 Digit, Size(H X W X D)-96 mm X 96 mm X 40 mm.(Make- Approved Make)

32 Amp AC-3 rating, 415 V, 50 Hz, Power contactor 220-230 VAC Coil Voltage, with 1 NO Contact.(Make- Approved Make)

Lamp blocks with integraded RED LED lamps.(Make- Approved Make)

Lamp blocks with integraded Yellow LED lamps.(Make- Approved Make)

Lamp blocks with integraded Blue LED lamps.(Make- Approved Make)

Non-illuminated flush Start push button switch with 1 NO element. (Make-ABB, Model No-CP1-10□-10/Other Approved Make)

Non-illuminated flush Stop push button switch with 1 NC element. (Make- Approved Make)

6 Amp, SP, MCB.(Make- Approved Make)

Over current relay with range 5-60 Amp, locked rotor & phase loss protection.(Make- Approved Make)

1.5 Sqmm PVC insulated(Un-sheathed) FR-LSH Cu wire single core multi strand 1.1 KV grade as per IS:694.(Make- Approved Make)

2.5 Sqmm PVC insulated(Un-sheathed) FR-LSH Cu wire single core multi strand 1.1 KV grade as per IS:694.(Make- Approved Make)

6.0 Sqmm PVC insulated(Un-sheathed) FR-LSH Cu wire single core multi strand 1.1 KV grade as per IS:694.(Make- Approved Make)

3 Way Star Type Terminal 150 Amp, 6 mm Thick stud.(Make-Kothari)

Star-Delta Timer range 3 Sec-120 Sec, 240 VAC, One No(Star)+1 No(Delta).(Make-Approved Make)

6 Sqmm copper socket pin/Thumb type, PVC sleeve, MCB channel, cable tie etc for whole erection materials for the installations as per requirement.

At first remove the damaged,power contactor,mcb, etc from the existing panel after disconnection of all power line.Then fixing the above supplied materials at same place, then making power & control circuit wiring through out the panel work must be done by Experienced electrician and wholly satisfaction of EIC.

Supplying & fixing sheet metal, 4 Bars, 315 Amp, (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – (As per Drawing no. 470 of PWD Specification Book – May 1991).Dimension of Al. bars [85mm long] Size-4x50x10mm,Dimension of Sheet Metal Box-500x150mm.(Make-Approved Make)

Supplying and fixing 63 Amp, 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating on Angle iron frame.

63 Amp HRC Fuse link Suitable for Type FN 63 / FNX 63 S-D-Fb & for HC 63 Fuse base.(Make-L & T, Cat No-SF90159/Other Approved Make)

Add. GST@18%

Add. Cess@1%

M/s. SOMA ENTERPRISE

EASTERN INDIA SALES AND SERVICE