REPAIR MAINTENANCE OF EM INSTALLATION BLDG POWER HOUSE AT TOP II OVER HEAD TANK PUMP HOUSE SUMP IN AGE BR I AREA UNDER GE MIS MHOW

Amount

Demolition of cement concrete un -reinforced in ground floors and pavings n.exc 15cm thickness complete all as directed and specified.

M&L for 75 mm thick PCC (1:3:6) type C2 (using 40mm grade stone aggregate) as in plinth protection, floor finishing the surfaces even & smooth w/o using extra cement complete all as specified and directed.

M&L for 100 mm thick cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in filling sub base of floor complete all as specified and directed.

M&L for 40mm thick PCC (1:2:4) type B-1, (20mm graded aggregate), as in bases of floors even complete all as specified and directed.

M&L for sand cushioning 25 mm thick under floors including spreading, watering and consolidation complete all as specified and directed.

M&L for Machine cut kota stone slab flooring , 18-20 mm thick , laid over cement screed 20 mm thick in CM (1:4) laid and jointed with grey cement slurry , mixed with pigment to match the shade of slab including rubbing and polishing to mirror complete all as specified and directed.

All as per item No 6 here-in before but as in vertical surfaces such as skirting/ dados laid over and including 10mm thick screeding layer in cement mortar 1:3, laid and jointed with grey cement slurry @ 3 Kg per square metre, mixed with pigment to match the shade of the slab incl rubbing and polishing with wax polish, complete all as specified and directed

M&L for machine pressed precast (factory made) concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-30 Grade, laid over compacted dry sand and jointed with gray cement slurry and pigment and sides of paver blocks grouted with all as directed and specified (Note: Sand cushioning shall be measured and paid separately.)

M&L for machine pressed precast (factory made) concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-30 Grade, laid over compacted dry sand and jointed with gray cement slurry and pigment and sides of paver blocks grouted with all as directed and specified (Note: Sand cushioning shall be measured and paid separately.)

M&L for Pre-cast cement concrete block masonry with solid blocks,type B1 (using 20mm graded stone aggregate) exc. 10 cm in width and setting in mortar 1:4 as in kerbs stone, complete all as specified and directed.

Demolition of brick work built in cement mortar in any position including all quoins, arches & pillars etc. complete all as directed and specified.

M&L for Brickwork with fly ash brick with using Modular size Brick , straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as directed and specified..

All as per item No 12 here-in-before but except bricks and (Re-use the old serviceable bricks obtained from item No.11 above). complete all as directed

Taking down cement plaster on walls built in cement mortar etc including racking out joints, hacking for key. Scrubbing down with water etc all as directed and specified.

M&L for Rendering 15 mm thick in cement mortar (1:4) , mixed with water proofing compound, on brick or concrete surfaces, trowelled to even and smooth finish without using extra cement with liqued water proofing compound "200ML Per bag Note : WPC (lequid) shall be measured and paid separately complete all as directed and specified.

M&L for Rendering 15 mm thick in CM 1:6 finishing even and smooth without using extra cement complete all as directed and specified.

M&L for Rendering 5mm thick in cement mortar 1:3 as on concrete surfaces in ceiling finished even and smooth without using extra cement all as directed and specified.

Supply only liquid water proofing compound.

M&L for Preparation of new plastered surfaces of ceiling and applying three coat of white wash all as directed and specified.

M&L for Preperation of newly plastered wall surfaces and applying two coat of oil bound distempering over a coat of cement primer finished even and smooth complete all as directed and specified.

M&L for Preparation of new plastered surfaces of walls and applying two coat of cement base paint complete all as specified and directed.

M & L for Preparation of old decorated surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and trading oil and greasy spots from plastered or unplastered surfaces including cornices, pilasters etc and apply two coat of white wash complete all as specified and directed.

All as per item No 22 here-in before but applying two coat of white wash on ceilings. complete all as and specified. directed

All as per item No 22 here-in before but applying one coats of oil bound distemper. complete all as specified.

Preparation of old wood or wood based surfaces of any description exc 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of old steel and iron surfaces of any description exc 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

M&L for 4 mm thick self textured, self coloured, non asbestos ceiling board of size 605 x 605/ 598 x 598 mm with and including anodised aluminium snap grid frame work for false ceiling with size of grid 605 x 605 mm consisting of main and cross tee of size 36.5 x 25 x 1.4 mm weighing 0.24 Kg/Rm and 23.5 x 26.4 x 1.4mm weighing 0.191 Kg/Rm respectively and grid shall be suspended with GI wire 1.5 to 2mm dia at 1.5 to 2m c/c complete all as specified and directed.

M&L for 1mm thick of white cement based wall care putty whereever required complete all as directed and specified.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete as directed and specified.

S&F of Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as complete all as specified and directed by Engr-in-Charge. Note : Pre- painted galvalume aluminum zinc coating GI based profile pattern steel sheet should be TATA Blue scope colourbond XRW or equivalent approved by GE.

M&L for complete removal of old decorated plastered surfaces of wall, pilasters, cornices etc by brooming down or steel wire brushing scrapping down and washing with water after completion of precoat treatment apply two coats of Anti fungal weather coat acrylic emulsion paint over a coat of primer (X2) and over a layer of cement based wall care putty complete all as directed and specified. Make : (a) Asian (Apex Ultima), Berger weather coat all Guard, ICI Dulux (Weater shield Max), Nerolac (Excel Total). Make of primer : Asian (X2) or equivalent. Note : Each stages i.e. Preparation, Primer application, First coat and second coat of Apex will be passed by Engr-in-Charge. (b) Written warranty for four years is required to be furnished by the contractor for this item. Note : Putty shall be measured and paid saperately under S. Item No 29 of Sch 'A'.

M & L for Preparation of old decorated surfaces to RCC overhead tank by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and trading oil and greasy spots from plastered or unplastered surfaces including cornices, pilasters etc and apply two coat of cement based paint upto 10m hight complete all as specified and directed

All as per item No 33 here-in before but applying two coat of cement base paint of Height above 10 mtr but not exceeding 20 mtr). Complete all as specified and directed.

All as per item No 33 here-in before but applying two coat of cement base paint of Height above 20 mtr but not exceeding 25 mtr).complete all as specified and directed.

Dismantling structural steel work including door gate but excluding frame trusses making goods staples. complete all as specified and directed.

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails braces, etc, complete, drilled for fixing of steel sheeting or other covering. Door, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rail and guides) and hanging also fastening and fixing complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) embedded in concrete,brick work,masonary etc. any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers n exc. 25 cm complete all as specified and directed.

M&L for PCC (1:3:6) Type C-2(using 40mm graded aggregate) as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars & posts (incl caps & bases) complete all as specified and directed.

Hand rails, half round or other stock section hand-rail straight portion,drilled and countersunk for balusters running bars, nosing to steps incl embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing incl cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets incl all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F of Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe-290 Gde E-165 complete all as specified and directed.

M&L for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long and 11 to 15 mm dia complete all as specified and directed.

Dismantling of fencing wire mesh,any type complete all as specified and directed.

Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.incl provission of binding wire complete all as specified and directed.

S&F in repairs of Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed fixed in repair with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

All as per item No 48 here-in before but fixing only wire obtained from dismantling of old wire.

S&F of mild steel work(Tubular, square/rectangular hollow section) as in Purline, rafter and wind ties, cleat roof Trusses etc including securing bed plate, plat iron fillets for securing wire mesh etc including all necessary drilling bolting or riverting, etc, and similar work conforming to IS 1161-1979 dge St-240 complete as directed and specified.

Preparing new steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M/S SHIV SHAKTI ENTERPRISES