Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.0 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹26.4 L+₹1.5 L (5.83%)Rejected-AOC | L2 | Rejected-AOC NOT LOWEST |
Tender Value
₹26 L
EMD Value
₹52,000
Closing Date
21 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri S Srinivasa Rao IDSE CWE
Shri Sajan Kumar DCWE Contracts
PROVISION OF INFLAMMABLE / CONSUMABLE STORE WITH SAND BED FOR AVIATION / INFLAMMABLE / CONSUMABLE OUTSIDE AVIATION BUILDING AT 515 ABW UNDER GE (SOUTH) BANGALORE
2022_MES_551158_3
86138/E8
Open Tender
Civil Works - Others
Item Rate
120 days
HQ CWE ARMY BANGALORE
AS PER TENDER
7 documents required · 7 mandatory
₹500
Yes
GE (SOUTH) BANGALORE
₹52,000
Yes
HQ CWE ARMY BANGALORE
6 Dec 2022
31 Oct 2022
23 Nov 2022
31 Oct 2022
21 Nov 2022
9 Nov 2022
31 Oct 2022 - 7 Nov 2022
8 Nov 2022
Amount
Surface dressing n exc 15 cm deep in soft/loose soil complete all as specified and as directed.
Excavation in trenches,n exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc or for shafts,wells,cesspits,manholes,pier holes etc n exc 10 sq m on plan and n exc 1.5 m in depth in soft/loose and getting out complete all as specified and as directed.
Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and as directed.
Returning filling of soft/loose soil in including spreading, levelling,watering and well ramming in layers n.exc 25 cm complete all as specified and as directed.
Removing excavated soil exc 250 m and but n.exc 500 m and depositing where directed complete all as specified and as directed.
Plain cement concrete Type D2 1:4:8 using 40 mm graded stone aggregate as in foundations,filling and mass concrete complete all as specified and as directed.
Formwork to sides of concrete foundations,footings,bases of columns,raft and raft beams,sides and soffits (if any) of foundation and plinth beams,and similar work,vertical or to batter for flat rough finished surfaces of concrete complete all as specified and as directed
Formwork to sides of pillars, posts, struts,piers,columns and stanchions for rough finished square/rectangular complete all as specified and as directed.
Formwork to sides and soffits of floor or roof beams,beam haunchings, griders, bressummers, lintels, cantilevers,shelves including supports, overhanges, etc...also splays between floors and beams for rough finished flat complete all as specified and as directed.
Formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finished flat complete all as specified and as directed.
Formwork to soffits of suspended slab such as roof slabs,floor slabs, landings and similar work not exceeding 200 mm thick for flat rough finished surfaces of concrete complete all as specified and as directed.
Formwork to edges of concrete flats,treads,breaks in floors,window cills n exc 20 cm wide for rough finished flat complete all as specified and as directed.
M&L for M-25 (Design Mix) for foundations,including rafts, footings,foundation beams,plinth beams,bases for columns etc. basement slabs,under reamed piles and mass concrete complete all as specified and as directed.
M&L for M-25 (Design Mix) for columns,pillars,piers,posts and struts complete all as specified and as directed.
M&L for M-25 (Design Mix) for beams, Cantilevers, bressummers,lintels over 1.5 m span complete all as specified and as directed.
M&L for M-25 (Design Mix) for chajjas complete all as specified and as directed.
M&L for M-25 (Design Mix) for slabs supported on walls,beams and columns in floors,roofs,landings,balconies,canopies,deck slabs and in shelves and the like complete all as specified and as directed.
M&L for M-25 (Design Mix) for fins, fascias, louvres, parapets, and railings exc 60 cm in height,newels,balustrade,and the like complete all as specified and as directed.
Mild steel TMT bars 10 mm dia and over,cut to length,bent to shape required,including cranking,bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and as directed.
Mild steel TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (anealed) not less than 0.9 mm dia or securing with clips.
.All as per item N0.20 here in before .but 5 mm dia and over upto and including 10 mm dia in stirrups,spacers and binders complete all as specified and as directed.
Providing pre-cast cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate ) in window or door cills, cover slab , litels, bressumers, steps, quoion blocks (for use with masonry) string courses, coppings, kneelers, apex stones, pier set in cement mortar 1:4 all as specified and as directed.
Precast cement concrete block Type C1, 1:3:6 ( using 20 mm graded stone aggregate) masonry with solid block,exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed.
M&L for moorum/red bajri filling in floors or pavings,laid in layers n exc 15 cm thick,spread,levelled and rammed including watering complete all as specified and as directed.
M&L for 75 mm thick cement concrete type D-2,1:4:8 (40 mm graded aggregate) as used for subase of the flooring complete all as specified and as directed.
M&L 150 mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate) as in floors including Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and as directed.
M&L for Sand filing under floors for laying top layer including watering and consolidation complete all as specified and as directed.
S&F Forming Construction joint 30mm deep x 10mm wide filled with sealing compound A Grade all as specified and as directed.
S&F Forming Construction Dummy joints 65mm deep x 10mm wide filled with sealing compound A Grade all as specified and as directed.
Rendering 15mm thick in two coat ie. 10mm thick under coat in CM 1:6 and 5mm thick finishing coat in CM 1:4 finished even & smooth without using extra cement using WPC complete all as specified and as directed. Note: WPC will be measured and paid separetly.
Rendering 10mm thick in CM 1:6. finished even & smooth without using extra cement to walls all as specified and as directed.
Rendering 5mm thick in CM 1:3. finished even & smooth without using extra cement to ceiling all as specified and as directed.
Preparation of Newly Plastered surfaces of Walls and applying two coat of cement base paint over one coat of primer all as specified and as directed.
Preparation of newly plastered surfaces of Ceiling and applying three coat of white wash complete all as specified and as directed.
Preparation of newly plastered surfaces of wall and applying three coat of white wash complete all as specified and as directed.
Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and /or riveted or forged into spikers , framed guard bars barred iron doors,ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165,complete all as specified and as directed.
Steel rolling shutters of 1.25mm htickness of laths, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete push pull or manual type complete all as specified and as directed.
S&F ball bearing for rolling shutters complete all as specified and as directed.
S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed.
Preperation of new or previously untreated steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applaying two coat of synthetic enamel paint over a coat of red oxide,zinc chrome all as specified directed.
M&L for broken stone hardcore of gauge n exc 63 mm, deposited,spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for PCC 1:3:6 type C2 using 40mm graded aggregate for 75mm thick Plinth Protection finished even and smooth without using extra cement complete all as specified and as directed.
M&L Reinforced concrete pipes of size 250mm dia, class NP3, laid and jointed complete with collars complete all as specified and as directed.
M&L forCement Concrete 1 : 3 : 6, type C-2 bed to drain pipes including packing under and compietely surrounding pipes with concrete after they are laid and tested complete all as specified and as directed.
M&L for 10 mm thick plastering on roof using in CM 1:3 finished even & smooth without using extra cement and using WPC complete all as specified and as directed. Note: WPC will be measured and paid separetly.
M&L 40 mm thick cement concrete type B-0, 1:2:4 (using 12.5 mm graded crushed stone aggregate), as in sub base of floors.
M&L for cleaning the plastered/concrete surfaces with wire brushes and applying water proofing treatment as under: (a) Apply bitumen primer at the rate of 0.27 litre per Sqm as per IS 3384-1986 and bonding bitumen of VG-10 @1.20 Kg per Sqm. (b) APP modified water proofing memebrane as per IS 16540/16532-2017, 3mm thick and weighing not less than 3.80 kg per Sqm reinforce polyster/HMHDPE matt black finish over compatible primer/bonding bitumen and finish the top surface with bituminus aluminium paint @0.10 Ltr per Sqm complete all as specified.
Supply only water proofing compound complete all as specified and directed.
OM CONSTRUCTIONS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .