Reinvited for Construction of boundary wall in Ward no 14 in University of Health Sciences Rohtak

Amount

Earth work in excavation in foundations, trenches, etc. in all kinds of soils, not exceeding 2 meters depth including dressing of bottom and sides of trenches, stacking the excavated soil, clear from the edge of excavation and subsequent filling around masonry, in 15 cm layers with compaction, including disposal of all surplus soil, as directed within a lead of 30 meters. (HSR 6.6)

Cement concrete 1:8:16 with brick ballast 40 mm Nominal size in foundation and plinth.(HSR 10.26)

First class brick work laid in cement sand mortar 1:6 in foundation and plinth(HSR.11.2)

Damp proof course 40 mm thick of cement concrete 1:2:4 using stone aggregate with two coats of bitumen 20/30 penetration at 1.65 Kg. per sqm laid hot and sanded.(HSR 10.114)

First class brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level (HSR.11.7)

15 mm thick cement plaster 1:6 on walls (HSR 15.7)

12 mm thick cement plaster 1:6 on the rough side of single or half brick wall (HSR 15.12)

Painting one coat with synthetic enamel paint in all shades on old wood-work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint (HSR 16.7) L.R

Applying priming coat with metal primer on new steel or iron work including preparation of surface. (HSR 16.9) L.R

Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surfaces. (HSR 16.25) L.R

Providing two coats of exterior acrylic emulsion paint. ( HSR 16.79) L.R

(b) 1st quality

Wrought iron and mild steel (using angles, flats, square bars, tee and channels) ladders, grills, gratting frames, window guards, iron doors openable or fixed staircase or parapet or any other type of railing, gates and tree guard etc., including cost of screws and welding rods or bolts and nuts complete fixed in position. (HSR 18.12)