MP1/RENOVATION OF WOOD HOUSE/YARD/CMSRU

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil ,backfilling the same soil or disposal of surplus excavated soil as directed.Rate is inclusive of demolishing bituminous surface/ concrete/ rubble/ solingstone etc if any.complete.

Providing and laying plain cement concrete 1:4:8 using 40mm down graded IS nominal size hard broken metal including cost and conveyance of all materials,labour for mixing, laying, consolidating curing as per IS.456 etc.complete but excluding cost of cement and cost of formwork.

Providing Form work,Centering and shuttering including strutting, propping using shuttering sheet , supporting beams, supporting jacks,wooden planks and other incidentals etc. including removal of formwork after completion of work and clearing all materials and cost and conveyance of all materials labour etc

Providing and laying reinforced cement concrete 1:2:4 using 20mm down graded broken granite metal in ground floor upto 5m height including cost and conveyance of all materials, labour for mixing, laying, consolidating, curing,cost of dewatering etc.complete but excluding cost of cement,cost of formwork and cost of reinforcement.

Providing and laying reinforced cement concrete 1:11/2:3 using 20mm down graded broken granite metal for columns , beams and slabs including cost and conveyance of all materials, labour for mixing, laying, consolidating, curing, cost of dewatering etc.complete but excluding cost of cement, cost of formwork and cost of reinforcement. (formwork and reinforcement which will be measured separately).

Reinforcement for RCC work including cost and conveyance of all materials, labour for, uncoiling ,straightening, cutting,bending, laying & tying with 22G binding wire etc.complete but excluding cost of steel (mild steel or tor steel) but including cost of binding wire.

Brick work in CM 1:4 for half brick wall using class designation 7.5 for superstructure including cost and conveyance of all materials, labour, other incidentals etc complete, excluding cost of cement.

Up to second floor level

Providing and laying factory made Precast concrete solid blocks of 200 mm thickness of grade M10 from approved manufacturer in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) for all leads and lifts including cost and conveyance of all materials, labour, other incidentals like scaffolding, curing etc complete, excluding cost of cement.

Supplying and fixing 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, with approved accesories such as 100mm SS hinges 4 nos., 100mm Anodised aluminium tower bolt 1no., 150mm aluminium aldrop 1no., Chromium plated Brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles and necessary screws including cost of labour and all other incidentals etc. complete. .

With Frame of section 90 x 45 mm

Supplying and laying non-slippery/anti-skid ceramic flooring tiles of approved brand ,quality and colour set in CM 1:4 20mm thick and Jointing with grey cement slurry @ 3.3 kg/sqm for the proper binding of the tiles to line and level, pointing the joints with coloured cement to match with the tiles including cost and conveyance of all materials, labour other incidentals (size 300mm x 300mm), excluding cost of cement.(Basic rate of tile Rs.410/m2 Excl.GST )etc. complete

Supplying and laying ceramic glazed tiles of approved brand ,quality and colour for dadoing by pasting with Cement and pointing the joints with coloured cement to match with the tiles in line and level including cleaning the existing surface properly, cost and conveyance of all materials, labour other incidentals etc. quantity of cement shall be measured in relevant item. complete (Basic rate of tile Coloured Tiles Rs. 210/m2 Excl.GST)

Supplying and laying polished 18mm thick Granite slab in required design and patterns with smoothly polished upper edges in semi circular shape, set in CM 1:3, 20mm thick plastering laid and jointed with cement slurry and pointing with pointing powder pigment of matching shade including rubbing, curing and polishing etc in line and level including cost of all materials, conveyance, labour, other incidentals etc complete, excluding the cost of cement. (Basic rate of Granite is Rs.2298/m2)

Plastering with CM floated hard and trowelled smooth including cost and conveyance of all materials, labour, curing etc.complete as directed by the Engineer-in- charge but excluding cost of cement.

1:4, 12mm thk.(1cement : 4Fine sand)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Painting with primer of approved quality and shade after rubbing and cleaning the surface including cost and conveyance of all materials,labour, scaffolding other incidentals, curing (wherever required) etc.complete.

One coat cement primer on plastered surface

One coat zinc chromite primer

Painting with ready mixed interior quality plastic emulsion paint of approved quality and colour after rubbing and cleaning the surface using wire brush, sand paper etc. wherever required including cost and conveyance of all materials, labour, scaffolding other incidentals etc. complete.

One or more coats on old work

Painting with exterior quality Acrylic emulsion paint of premium quality and colour after rubbing and cleaning the surface using wire brush,sand paper etc. including cost and conveyance of all materials labour, scaffolding other incidentals etc. complete.

One or more coat on old surface

Painting with synthetic enamel paint of approved quality and colour after rubbing and cleaning the surface using wire brush, sand paper etc. wherever required including cost and conveyance of all materials, labour,scaffolding other incidentals etc. complete. a.One or more coat on old surface

One or more coat on old surface

Suppying and stacking at site OPC/PPC/PSC conforming to relevant IS.

Supplying and stacking at site TOR steel reinforcement bars of different diameters conforming to relevant IS1786 .

Supplying and fixing glazed earthenware European type water closet of white colours with 8 mm dia C.P. Brass/ S.S. Jet with flexible tube upto 1 metre long with S.S. tringular plate for Eureopean type W.C.(Hindware/Kingston/ Prima /Parko/ Marc),plastic seat with lid with controlled flush, low level cistern made of vitreous china of 10 litre (full flush) capacity-white etc complete.

Supplying and fixing the following water supply fittings approved by the Engineer-in-charge, including cost and conveyance of all materials, all labour for fitting, all other incidental charges etc. complete for all levels.

15/20 mm dia angle cock

SS gratings - 125/150mm size

15mm C.P. brass adjustable shower rose- ordinary type

Brass ball valves

25 mm size

40 mm size

50 mm size

PVC Float v/v with polythene floats (25mm)

Supplying, threading, laying and jointing the following dia threaded PVC pipes of approved quality and brand including all cost and conveyance of all materials, sundries etc. complete. The rate shall be inclusive of supplying and fixing necessary specials etc. as per the direction of the Engineer-in-charge.

20mm dia

25mm dia

32mm dia

Supplying, fixing, laying and jointing the following dia PVC pipes with pasted type joints of approved quality using solvent cement including all cost and conveyance of all materials, sundries etc. complete. The rate shall be inclusive of supplying and fixing necessary specials etc. as per the direction of the Engineer-in-charge.

110mm pasted PVC pipe(4kgf)

50mm dia (10kg/cm2)

Supplying and fixing ISI marked / best quality approved brand 110 mm PVC specials at all heights including cost and conveyance, all labour and all other incidentals etc. complete all as directed by the Engineer-in-charge.

Tees, door tees, bends etc.

Adapters, reducers, offsets, vent cowl etc.

Elbows, door elbows, reducer elbows,etc.

Supplying and fixing approved branded ((Hindware/Paryware/RAK/Cera) quality and shade 550mmx 400mm or nearest size wash hand basins of glazed earthernware, with necessary brackets, one central single lever quarter turn pillar cock with foam flow, one central 15mm PVC connection, 1 no 15 mm CP stop cock , CP brass waste of standard patterns, 32mm PVC waste pipe, cutting and making good the walls, painting the brackets two coats including cost and conveyance of all materials, labour, other incidentals etc. complete.

Providing and fixing in position approved quality white glazed earthenware flat back lipped front urinal 265 x 315 x 440mm or nearest size having a 15mm PVC connection, 32mm or nearest dia PVC waste connection and 1 no CP spreader connected to waterline and 15mm brass push cock, cutting and making good the walls and floors, including cost and conveyance of all materials, screws, plugs, labour, other incidentals, etc. complete. All PVC items are to be heavy duty type.

Supplying and fixing 690 x 165 x 325mm size or nearest size porcelain urinal division plate of approved quality and colour as directed by the Engineer-in-charge.

Providing and fixing 600 x 450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard card ground fixed to wooden cleats with CP brass screws and washers complete.

Providing and fixing PTMT towel rail complete with brackets fixed to wall with CP brass screws with concealed fittings arrangement of approved quality and colour: 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

Supplying and fixing PVC multi floor traps with 110mm dia including cost and conveyance of all materials, labour, other incidentals etc. complete.

Providing and fixing 15mm nominal bore CP brass long body bib cock with wall flange of approved quality and make.

Supplying and fixing PVC line traps including cost and conveyance of all materials, labour, other incidentals etc. complete.

Providing and fixing in position louver type ventilator using powder coated Aluminium frames of approved quality and shade using 48x38x1.5mm size or nearest available sections, louvers made with 4mm thick glass, screws, nails etc. including cost and conveyance of all materials, all labour etc. complete as directed by the Engineer in charge.

Supplying & fixing HDPE (sintex or equivalent) water tank(2000 litres) connecting using necessary fittings such as connectors, adapters, and testing of pipe lines etc. including cost and conveyance of all materials, labour, other incidentals etc. complete.

Providing and fixing/replacing on roofing/cladding at all heights, levels and locations Aluminium profile industrial troughed sheet of Alloy 31500/31000/40800, conforming to IS 1254, IS 737, IS 2676. The sheet shall be fixed using self drilling/self tapping SS screws of size 5.5x65 mm with EPDM seal complete upto required pitch in horizontal, vertical or curved surfaces i/c cutting to size and shape where required as per specifications and direction of Engineer-in-Charge. The rate shall be inclusive of all screws, seal, ridge, labour, scaffolding, machinery for fixing and approved sealent where required etc. but excluding the cost of purlins, rafters and trusses.

0.56 mm thick, the profile detail width 1044/920 mm, cover width 1000/875 mm.

Dismantling,removing and lowering wooden frame work ,planked sheeting , ceiling planks, AC/GI sheets for roofing, cladding, ceiling, wooden partition stacking serviceable materials & removing the unserviceable material as per directed by EIC etc. complete.

Dismantling A.C./G.I. corrugated sheets of roofing/cladding up to height of 5metres including conveying and stacking the dismantled materials at the places pointed out by the Engineer-in-charge.

Providing neccessary electrification work inside Quarter including all wireing, cableing, light fittings, switch board repairing , fans etc as per directed by EIC Note : 4 nos tubelight,8 nos LED light and electrical repairing installation and commisioning

Supply and Installation of 2000Ltr Biodigester septic tank madeup of 8mm thick FRP(Fibre reinforce plastic) flat bottom shaped with 4"inlet Connection with the existing toilet and necessary outlet connection to the near by Sewage line with all Connections,fittings, filling the tank with innoculam, including cost and conveyance of all materials, labour, clearing the site after work, other incidentals etc. complete.

Carrying out miscellaneous works by arranging unskilled labour as per the direction of the Engineer-in-charge.

GRID CEILING Providing & Installing to true line and level commercial type Suspended Modular Ceiling suspended using suitable support system at every 1200mm intervals.General Requisites; Grids width: 24 mm finished in approved shade (white). The main runners & cross Tees to have "stab" installation system made of corrosion protected galvanized steel or approved equivalent.Tile Specification Tile type: White metal Perfrated aluminium Tile Size 600 x 600 Edge detail: Tegular Ceiling Suspension System Grid Member Sizes.Cross Tees: 24 x 24 x 0.30mm or nearest available size Perimeter Section: 24 x 27 x 0.40 mm or nearest available size.False Ceiling will be measured on horizontal Plane only. Horizontal Plane measurements are to be inclusive of vertical drops, edge mouldings, fascias etc.All extra tiles occupied by lights and diffusers to be returned to department Rate quoted to include all cut outs required for light fixtures.

Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes. (a) 0.80 mm thick with zinc coating not less than 275 gm/m²

Providing and fixing of 3mm polycarbonate sheet with necessary screws and fittings i.e. ¾ size self screws with ½ inch ( Aluminum + Rubber washers) Including neccessary scaffolding etc

Fabrication & erection of Structural steel work, using Tees, angles, channels, plates,Tubes & Pipes etc. at all heights, fixed with or without connecting plate, including cutting, bending/straightening, welding/ bolting, fabrication, erecting in position, aligning the erected structure, cost of all accessories, hire for tools and plants and applying a priming coat with zinc chromate primer after mechanical buffing, etc complete. all as directed by the Engineer-in-charge.(all miscellaneous items made of steel shall be measured in the same item) complete.

Using Steel procured by the contractor

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 100mm thick compacted bed of 6mm/10mm aggregate over compacted soil, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in Charge

Melamine polishing on wood work (one or more coat).

GST at 18%

Creative Constructions

vagmine marine care

arcoma