Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹3.8 Craccepted-aoc | ₹3.8 Cr | accepted-aoc |
Tender Value
₹3.7 Cr
EMD Value
₹5.6 L
Closing Date
2 Apr 2026, 9:30 pmClosed
Public Works Department
MAHADEVAPPA H M
Improvements of Petta Govt Higher Primary School play ground at Channapatna City in Bengaluru south district
PWD/2025-26/BD/WORK_INDENT31408/CALL-3
PWD/2025-26/BD/WORK_INDENT31408/CALL-3
Open
Buildings
Two Tender Document System(Two Cover)
PWD Special Division Office Ramanagara
7 documents required · 7 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
Satisfactorily completed as prime contractor, at least one similar nature of work value not less than Rs.186.00 Lakhs. (Building Civil Work)
executed in any one financial year, the following minimum quantities of work: 1. Earth work Excavation & Embankment-------17,516.00 Cum 2. SSM /B.B.M-------308.00 Cum 3 PCC/RCC-------818.00 Cum 4 TMT Steel-------35.00 Tonne 5 All types Flooring-------179.00 Sqm 6 Plastering-------2539.00 Sqm 7 Painting-------534.00 Sqm
Tenderer or his identified sub-contractor should possess required valid electrical license for executing building electrification works and should have executed similar electrical works totaling Rs.5.00 lakhs (usually not less than 50% of the electrical works) in any one year
The Tenderer or his identified sub-contractor should possess valid license for executing water supply/sanitary engineering works and should have executed similar water supply/sanitary engineering works totaling Rs.5.00 lakhs (usually not less than 50% of the water supply/sanitary engineering works) in any one year
Sl.No. Machineries To be Own To be Own/Hire/Lease 1 Concrete Batch Mix Plant/ Rotovator of suitable Specification 0 1 2 Transit mixers 1 1 3 Excavator 1 1 4 Water Tanker 1 1 6 Tipper 2 1 7 Vibrator 1 1
Tenderer who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity - (AXNX1.5 - B) where A -Maximum value of works executed in any one year during the last five years taking into account the completed as well as works in progress. N -Number of years prescribed for completion of the works for which tenders are invited.B - Value, at 2025-26 price level, of existing commitments and on-going works to be completed during the next 9 Months.
To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2020-21, 2021-22,2022-23,2023-24,2024-25 (a) Achieved in at least two financial years a minimum financial turnover (in all classes of Civil Engineering Building construction works only of Rs. 743.00Lakhs.
liquid assets and /or availability of credit facilities of no less than Rs.124.00Lakhs (Credit lines/ letter of credit/ certificates from nationalized banks for meeting the fund requirement etc. in the format to be as prescribed below
₹5,000
₹5.6 L
2 Apr 2026
17 Mar 2026
4 Apr 2026
2 Apr 2026
25 Mar 2026
Part A Amenity Block
Cutting of Trees, excluding removal of stumps and roots of trees - Girth from 300 mm to 600 mm. Ref to MoRT&H : IRC - 201
Cutting of Trees, excluding removal of stumps and roots of trees - Girth from 600 mm to 900 mm. Ref to MoRT&H : IRC - 201
Mechanical Means -
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...
Mechanical Means -
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...
Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, tr...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transporta...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coars...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...
Providing Size Stone masonry with hard stone in foundation & plinth with
Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing Brick work with common burnt clay machine moulded perforated bricks of clasS designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cem...
Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement ...
Steel Fabrication
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...
Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement conc...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame...
Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 15...
Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered wi...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic E...
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and r...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including co...
Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removi...
Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup ...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...
Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and...
Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural ...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Integral Crystalline water proofing Admixture - Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the p...
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistan...
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistan...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ...
Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and f...
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer ...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and...
Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete.125x70x4 mm (ordinary type)
Providing and fixing bright finished brass tower bolts (barrel type) with
necessary screws etc. complete : 200x10mm
Providing and fixing bright finished brass handles with screws etc. com- plete: brass handles 125 mm with plate 175x32 mm
Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Aldrop 16mm dia, 300mm
Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete.25 mm diameter.
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for ...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
Providing and fixing mirror of superior Glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular...
Providing and fixing Soap dish wired with 200mm width made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium
Providing and fixing Liquid soap dispenser made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium
Providing and fixing Towel rail 600mm length with hooks made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium
Providing and fixing Stainless Steel Foldable Towel Rack 600 mm Long with all concealed fitting arrangements & all necessary accesories complete - class - Premium
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pip...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fitting...
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush...
Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete
Providing and fixing C.P. brass bib cock of approved quality conforming
Providing and fixing C.P. brass stop cock (concealed) of standard design
and of approved make conforming to IS:8931.
Door lock. (PWD SR 2023-24, Vol-2, Item No. 274, Pg.No - A-20)
Part B Estimate for Construction of Water Supply & Sanitary Works
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jo...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing and fixing of DI Double flanged wafer type (Concentric) / double eccentrically disc, Resilent seated Butterfly valves confoming to BS EN 593 / IS 13095 with shaft shall be of stainless steel...
Providing and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc....
Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments - Size 50 mm
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jo...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jo...
Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incha...
Providing of Gunmetal Ball Valve of Non rising stem, screwed in bonnet, inside screw, integral seats, screwed female ends to IS:554/ BS 21/ ISO 7, Unbreakable sheet metal Handwheel, confoming to IS:77...
Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 110 mm dia PVC BEND
Supplying of special moulded variety PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments to walk site etc. complete. 110mm dia PVC coupler...
Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 110 mm dia PVC Elbows
Supply and delivery at site special moulded variety PVC reducer as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 110 mm dia PVC REDUCER
Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 110 mm dia PVC Tee
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing and constructing WIRE CUT BRICK MACHINEHOLE CHAMBERS using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approve...
Providing and constructing WIRE CUT BRICK MACHINEHOLE CHAMBERS using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approve...
Providing and constructing WIRE CUT BRICK MACHINEHOLE CHAMBERS using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approve...
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber 100mm x 100mm size P type with Non Modular common burnt clay bricks of designation 3.5& w...
Providing, lowering, laying, jointing, testing and commissioning of Glazed Stone Ware Pipes of following dia, conforming to IS 651:1992, IS 4127 with latest amendments, including conveying to work s...
Part C Estimate for Construction of Sump
Mechanical Means -
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...
Steel Fabrication
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) including rounding off corners wherever ...
water proofing systems - Retaining wall (Inside) / oHT / UG sump Tanks - Providing & Applying Crystalline waterproofing slurry coat RCC structure like Retaining wall, Underground tank. The mater...
Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer ...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural ...
Part D Estimate for Construction of Septic Tank, Soak Pit & Rain Water Harvesting Pit
Mechanical Means -
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...
Mechanical Means -
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...
Steel Fabrication
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...
Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off ...
Newly Constructed Roof/bathroom/Toilet/balcony/utility with Cementatius waterproof coating - below 500 m2 - Providing and Applying CFTRI approved two component flexible polymer modified acrylic cem...
Providing to work spot rolling, lowering and placing in position RCC perforated rings in the already excavated pit including loading and unloading at both the destinations with all lead and lift with ...
supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-cha...
Providing Brick work with common burnt clay machine moulded perforated bricks of clasS designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cem...
40mm downsize (Item 7/ Page No.A-38, vol-1 Material component)
20mm downsize (Item 4/ Page No.A-38, vol-1 Material component)
6mm downsize (Item 1/ Page No.A-38, vol-1 Material component)
M Sand Coarse (Item 74/ Page No.A-41, vol-1 Material component)
Part E Construction of Compound Wall
Mechanical Means -
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Providing Size Stone masonry with hard stone in foundation & plinth with
Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coars...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...
Steel Fabrication
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and r...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural ...
Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both ...
Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to giv...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting Each deposited layer by ramming after watering with a lea...
Mechanical Means -
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...
Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...
Precast Cement Concrete Interlocking Blocks - Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Tra...
Part F CC Drain
Mechanical Means -
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...
Steel Fabrication
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...
Providing and laying 100mm thick pre-cast cover slabs over Road side drains / utility ducts / Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 55...
Part G Athletic Courts
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ...
Dismantling of Structures - Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, inc...
Dismantling of Structures - Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, inc...
Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transporta...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Kerb Stones - Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer i...
Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...
Sand - M-Sand. (PWD SR 2023-24, Vol - 1, Material No. 64, Page No. A-40)
Part H Estimation for Construction of Stage
Mechanical Means -
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coars...
Steel Fabrication
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...
Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer ...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...
supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia, c...
Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers ...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat...
Providing & fixing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete as per design d...
Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain wate...
Providing & fixing flat iron brackets 50x3 mm size with necessary bolts, nuts and washers etc. for fixing G.S. sheets gutters with purlins.
Painting top of roofs with bitumen of approved quality @ 17kg per
10 m2 impregnated with a coat of coarse sand at 60 cudm per 10 m2, including cleaning the slab surface with brushes and f...
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for t...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffoldin...
Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per direction...
Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to giv...
Part I Electrification works
Supplying heavy gauge PVC conduit pipe .mm dia. mm thick confirming to IS2509 with suitable size bends, metal/PVC Junction boxes,adhesive paste etc.,and running before concreting the slab.The conduit ...
Supplying heavy gauge PVC conduit pipe .mm dia. mm thick confirming to IS2509 with suitable size bends, metal/PVC Junction boxes,adhesive paste etc.,and running before concreting the slab.The conduit ...
Supplying heavy gauge PVC Conduit Pipe. dia.mm thick with suitable size bends,metal junction boxes adhesive paste etc.,by groove cutting in the wall and fixing by bracing UorJ hooks and cement plaster...
Supplying heavy gauge PVC Conduit Pipe. dia.mm thick with suitable size bends,metal junction boxes adhesive paste etc.,by groove cutting in the wall and fixing by bracing UorJ hooks and cement plaster...
Supplying and fixing PVC/metal conduit Deep junction box.25 mm deep Junction box
Supplying PVC/GI flexible conduit pipe. mm dia fixing on surface over inverted tape redwooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm usig NF s...
Supplying And Fixing Metal Fan Box with Round Hook
Point wiring using copper wire without switch Supplying and wiring adopting loop system in existing PVC Conduit/casing capping casing capping using2x1.5Sqmm(Phase & Neutral) & 1x1.0sqmm (Earthwire) FR...
Point wiring using copper wire without switch Supplying and wiring adopting loop system in existing PVC Conduit/casing capping casing capping using2x1.5Sqmm(Phase & Neutral) & 1x1.0sqmm (Earthwire) FR...
Point wiring using copper wire without switch Supplying and wiring adopting loop system in existing PVC Conduit/casing capping casing capping using2x1.5Sqmm(Phase & Neutral) & 1x1.0sqmm (Earthwire) FR...
Supplying and flush mounting powder coated/galvanized metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.1-2 ...
Supplying and flush mounting powder coated/galvanized metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.4-5 ...
Supplying and flush mounting powder coated/galvanized metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 6 W...
Supplying and flush mounting powder coated/galvanized metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.8 Wa...
Supplying and flush mounting powder coated/galvanized metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.10-1...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos.of machine screws,bolts nuts etc.,complete on the existing meta...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos.of machine screws,bolts nuts etc.,complete on the existing meta...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos.of machine screws,bolts nuts etc.,complete on the existing meta...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting backplate with required nos. of machines crews, bolts nuts etc., complete on the existing me...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos.of machine screws,bolts nuts etc.,complete on the existing meta...
Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches,regulators etc.,and fixing on existing wood or metal box using N. F. screws.
Wiring for lighting/power circuit using one of FRLS PVC insulated1100V grade,multi strand copper wire with low conduct or resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated1100V grade,multi strand copper wire with low conduct or resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated1100V grade,multi strand copper wire with low conduct or resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated1100V grade,multi strand copper wire with low conduct or resistance single core in open or concealed system of wiring with specified IS...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A One Way Switch
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6A Three Way socket
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 Stepped Fan Regulator Two Module
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6A Bell Push
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 .32A DP Switch
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6/16A Universal Socket
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 TV/Telephone Socket
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 RJ45/I.O Outlet Cat-6
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve,indicator ON/OFF,energy cross-3 with Short circuit breaking capaci...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve,indicator ON/OFF,energy cross-3 with Short circuit breaking capaci...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve,indicator ON/OFF,energy cross-3 with Short circuit breaking capaci...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve,indicator ON/OFF,energy cross-3 with Short circuit breaking capaci...
Supplying and fixing one of 230V Ding dong bell and aflush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote.Ding Dong Bell
Supplying of. feet-PVC Batten with integrated LED tube.W with high quality diffuser with Life of 25000 burning hours &70% lumen maintenance with CRI 80.Power Input:220-240V @ 50/60 Hz & Power factor 0...
Supplying of. feet-PVC Batten with integrated LED tube.W with high quality diffuser with Life of 25000 burning hours &70% lumen maintenance with CRI 80.Power Input:220-240V @ 50/60 Hz & Power factor 0...
Supply of LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded polyc...
Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4"dia telescopic M.S. pipe, with 2"dia 1.5m long M.S. Bracket and are welded with suitable angle,using 6mm thick M.S.sheet,...
Fixing halogen/metal halide/SVL/IL/LED flood light fitting over existing pole/wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires.
Fixing all types and all capacities of fluorescent/falseceiling/spotlight/CFL/LED fittings indoor on the wall/ceiling/rafters/girders using23/0.0076"twin twisted PVC insulated wires,required Nos of ro...
Fixing all types and all capacities of 1'x4'/2'x2'LED Light fittings indoor on the wall/ceiling/rafters/girders with necessary supporting frame,using2310.0076"twin twisted PVC insulated wires, require...
Supplying capacitor type ceiling fan complete with down rod blades,shackle,canopies etc,for operation on 230V,50cycles.Single phase AC supply conforming to ISS-374-1979 and with double ballbearing sys...
Supplying wall mounting fan suitable to operate at single-phase 230v AC. supply.400 mm Sweep
Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.12" Sweep (300 mm)
Fixing aceiling/wall mounting fan of all apacities and all types,with necessary clamps and'S' hook made out of15mm dia MS rod,with 5A.ceiling rose of approved quality with necessary length of 23/0.007...
Extra length of GI pipe of class B 19mm dia for down rod.
Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5A.ceiling rose with sufficient length of 23/0.0076i nch PVC insulated twin core wire.
Supplying and drawing UTP-CAT 6E LAN cable.
Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable.2Pair
Supplying & Fixing of switch mounting rack with power manager & Cable manager.9U with 450mm depth
Supplying fixing of Network Switches.24 Port Gigabyte (manageable
Supplying & fixing of I/O socket with back box.Single I/O
Supplying & Fixing of Patch panel for LAN cabling.24 Port 10/100/1000 patch panel
Supplying & Fixing of . ms Cat 6 Patch Cable.1 m
Supplying & Fixing of . ms Cat 6 Patch Cable.2 m
Supplying, erecting, testing & commissioning of OFF-LINE UPS system suitable for operation on 230V,50Hz,A/C supply, with all accessories complete and Excluding batteries and wiring complete.5 kVA OFF ...
Supplying, installation, testing & commissioning of 12 VDC,AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries.100 AH capacity
Extra for Fabrication supply and fixing of Stand fabricated using slotted angle /L angle of size 6mmx50mm for mounting outdoor/indoor A.C. unit/ Batteries.
Supplying, fixing, wiring, earth electrode for grounding conduits,I.C .cut outs and other equipment's on the meter board using 40mm dia2.90 mm thick GI pipe2.5m long buried in a pit.The pits hould be ...
Supplying fixing and wiring earth electrode for grounding of lifts,transformers, DG sets etc.using 40mm dia2.9mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed on the...
GI/Copper strips for grounding connections ,using necessary fixing materials as required.25 x 6 mm GI strip
GI/Copper strips for grounding connections ,using necessary fixing materials as required 25 x 6 mm Copper strip
Supplying of Guy Wire & GI Wire as per BESCOM Soecification.8 SWG GI Wire
(4.064 mm Dia), Std Wt: 131 Kg/KM
Supplying & fixing of retro fit type-LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K,CRI 70%.efficacy morethan 80 lumen per W, life 25000 burning hours and Compli...
Supplying & Fixing of 70-150 W lamp holder 2 Pin
Supplying of on load change over switches 4poles,AC-23A Duty, 415V, 50Hz, AC Supply. (Open Execution)(Make:AA/HPL/Havells/Schinder).100 A
Fixing of. ATPST/change over switch/Contactor along with neutral link with screws ,bolts, nuts and wiring using required capacity wires and circuit labelling.100A to 250A TPST
Supplying and fixing Moulded Case Circuit Breaker(MCCB) over the existing wood/panel board using necessaryscrews,bolts,nuts,necessary phase separators,handle and wiring complete.Protection of Overload...
Supplying, fixing and wiring Residual current circuit breaker (RCCB)240/450V upto 300mA sensitivity on existing wood/ panel board.16-25A 4 pole
Supplying, fixing and wiring Residual current circuit breaker (RCCB)240/450V upto 300mA sensitivity on existing wood/ panel board.63 A 4 pole
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50Hz AC with latest micro controller based,digital read out of percentage leakage curr...
Supplying, fixing and wiring 3 Phase Digital Ammeter/Voltmeter
Supplying, fixing and wiring Electronic Trivector Mete r(ETV) 5 to32/63A three phase4 wire whole current class-1 Accuracy Energy Meter.
Supplying, fixing and wiring 1000/5Ato1600/5A15VA Burden class 1 Current Transformer
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.
Supplying. A rated 3 phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are ...
Supplying and fixing angle iron frame work fabricated out of M.S.angle iron. and M.S.Flat.with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint.50 x 50 x ...
Supplying and fixing angle iron frame work fabricated out of M.S.angle iron. and M.S.Flat.with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint. 50 x 100 ...
Fabricating supplying and mounting MS box made out.SWG suitable for floor/wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover,equipped with ...
Supplying ,fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia2.90mm thick GIpipe 2.5m long buried in a pit.The pit should be f...
Supply of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-397...
Labour Charges for Laying of XLPE UG Cable using conventoional laying with excavation of soil.a)Cable trench excavation, 100x0.60x1=600, Ordinary soil (Extracted from Vol-1 PWD SR Sl No.1.17.1)
Labour Charges for Laying of XLPE UG Cable using conventoional laying with excavation of soil.c)Refilling and consolidation(Extracted from Vol-1 PWD SR Sl No.1.10)
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff.35 to 95 Sqmm
Supply of Heavy Duty Copper Terminal Long Barrel(Lug) as per BESCOM Specification.50 Sqmm Copper Terminal, Apprx Wt: 26 Gm
Supply Brass cable gland as per bescom specification.45 mm
Supplying and fixing regular MCB distribution boards on wall/ood board/flush mounting using required clamps,bolts,nuts etc.,with provision for fixing suitable type capacity MCB's single phase/3phase/s...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW4-31408 CALL 3.docx
Tender Document • 2.88 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .