ADDITION AND ALTERATION OF RCMA (N) OFFICE BUILDING INCLUDING PROVISION OF STAND BY POWER SUPPLY SYSTEM RCMA (NASIK)

Dismantaling of wall/ACP and ceiling boards (fibre, pulp, insulation, etc) or insulation board/slabs/blankets, any thickness, including cover fillets

Supply and fix 25mm thick insulated PVC wall lining consisting of PVC insulated panel with single side prelam PVC sheet having finish of plain colour/Lourve/3D/Wooden finish duly fitted into the wall including PVC strips/framework complete all as specified and directed.

Supply and fix Horizontal level supsended ceiling comprising of approved make GI Clip-in Micro peforated 600x600mm (normal size) tiles of 120gsm galvanised steel as per IS 277 (2003) suitable for architechtural finishes in 0.5mm thickness as in IS:513 (1994) in Global white colour with concealed supsension system having a bevelled edge of 3x3mm and height of 33mm on one side and 18mm on other side. Tile shall have perforation of hole diameter 1.8mm-2.5mm and open area 16%-20% with linear and diagonal pitch of 5.5mm and 7.7mm respectively along with a border of 10mm. The tile shall be electrostatically polyster powder coated using RoHS compliant powder having coating thickness ranging from 60-80 microns. Back side of the tile shall have Soundtex fleece hot pressed mechanically for uniform bonding to achieve NRC up to 0.7 all as manufactures instructions complete all as specified and as directed.

Material and labour for 10-15mm thick Gypsum false ceiling (L-shaped box) around false ceiling as in above item No.3 with approved pattern and design on GI chicken wire mesh of aperture 10 mm and dia of wire 1 mm fixed on frame work panel size 600x600 mm made of GI channel of standard section as approved of thickness not less than 1.25mm thick including offsets at different level as per design fixed to required geometric shape at different level fixed in approved design pattern complete with all necessary arrangement and tying with roof member with supsended of 8 mm dia round bar with required fixing arrangements spacing of supsenders shall not be more than 1.0 mtr on either side of each other all as specified and directed. The rate shall be inclusive of making of covers, moldings, offsets, cornices, domes, angular shapes, curves of any shapes, connecting to wall, projections with including finishing joint with tape & jointing compound ceiing including two coat of plastic emulsion paint over one coat of primer, all fixing shall be done as directed rate is inclusive of all fitting, fixtures, scaffolding, T&P, safety measures at site design and pattern as approved complete all as specified and as directed.

Material & Labour for metallic texture painting including preparation of surface with wall care/ synthetic putty, primer base coat & top coat in pattern/design as approved complete all as specified and as directed. Make ICI Paint (Dulux/Berger/Asian).

Taking down Chowkhats or frames with shutter (without taking off shutter from frame) exc 1.5 sq. m but n exc 4 sq. m each and removal from site all as specified and directed.

Material and labour Factory made single extruded WPC (Wood Polymer Compound) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade). Calcium carobate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawl strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant.

Material & Labour Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/cum and screw withdrawl strength of 1800 N (Face) and 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S S screws, all as specified and as directed. Note :- Rates inclusive of stainless steel butt hignes (3 Nos per door) and necessary S S screws shall be paid separately.

Material and labour for 18/19mm plywood board, medium density, flat pressed single layer type or three layer with with BWR type adhesive, fixed with screws to timber frame work (for architrave work around door) complete all as specified and directed.

Material and labour for 0.9 mm Decorative laminate type 1 of surface finish, colour and pattern of smooth glossy/matt finish with fully glazed finish as approved as in cupboard, doors or to be fixed at any location as directed, fixed with approved adhesive as per manufacturer's instructions including similar colour edge self adhesive banding tape hot pressed on exposed edge of board as directed. (lamination shall be machine pressed as directed on shutters, CBs, plywood etc as required).