Construction of Cross Regulator and Head Regulator for off taking Channel at RD 86000 of Main Branch Lower

Providing & fixing in position of flat/wedge seal including preparation of surface complete in all respects and to entire satisfaction of Engineer in charge.(75 mm dia x 10 mm th.)

Providing of hollow bulb seal & fixing in position including preparation of surface complete in all respects and to entire satisfaction of Engineer in charge. (100/44 x 10mm)

Supply, Providing and fixing of MS Bolts & Nuts (for seals of all types) with washer of all sizes and length required as per sample / drawing / direction of Engineer-In charge complete in all respects.

MS Housing Cover with worm and worm wheel assembly, shaft, handle, gun metal bush with triple start threading inside complete in all respects 1.0 Ton capacity

MS Housing Cover with worm and worm wheel assembly, shaft, handle, gun metal bush with triple start threading inside complete in all respects 0.75 Ton capacity

Fixing and Holding the gate with the help of 35 tonne capacity crane.

Commisioning & testing of Gates at site complete in all respects and to entire satisfaction of Engineer In charge.

Providing & Fixing Clamp Plate, complete in all respects (Size 70x10mm)

Providing & Fixing Clamp Plate, complete in all respects (Size 50x10mm)

Providing and Fixing of Coupling for Common Shaft

Providing Gate wheel assembly complete in all respects to entire satisfaction of engineer-in-charge 200mm dia

Assembling and fixing in position Gate Wheel Assembly complete in all respects and to entire satisfaction of Engineer-in-charge.

Providing & Fixing of Wheel Pin in position complete in all respects and to entire satisfaction of Engineer-in - charge. (upto 75mm/above 75mm)

Supply of spindle for hoist machanism including threading and machinning complete in all respects and to entire satisfaction of Engineer in charge 50mm dia

Supply of spindle for hoist machanism including threading and machinning complete in all respects and to entire satisfaction of Engineer in charge 40mm dia

Supply and fixing of spindle cover

Supply and fixing of Common Shaft duly machined at site complete in all respects and to entire satisfaction of engineer in charge

Scrapping, Brushing to remove paint to base metal surface.

Painting of gate leaf with primer coat and two coats with Anti corrosive Bitumastic paint to give an even shade with special quality paint.

Painting two coats with ready mix synthetic enamel paints over one coat metal primer

Providing Spherical Roller Bearing No. 22212-E/C3 make SKF

Fixing Roller Bearing complete in all respects

Providing & Fixing of Pin for Hoist complete in all respects and to entire satisfaction of Engineer-in - charge. (20 OD x 150 L)

Providing and Fixing Skin Plate 10mm

Providing and Fixing ISMB 200 x 100 mm

Providing and Fixing ISMC 200 x 75 mm

Providing and Fixing End Plate 205 x 10mm

Providing and Fixing of Stiffner Plate 100x8mm

Providing and Fixing of Base Plate 50 x 10mm

Providing and Fixing of Plate 40 x 15 x 250mm

Providing and Fixing of Plate 40 x 40 x 10mm

Providing and Fixing of Retainer Square Bar 25mm x 25mm

Providing and Fixing of Plate 205 x 10 x 110mm

Providing and Fixing of Plate OD 80mm, ID 60mm x 12mm

Providing and Fixing Bearing Retainer OD 150mm, ID 60mm x 10mm

Providing and Fixing of Locking Plate 40 x 20 x 10mm

Providing and fixing Grease Nipple

Providing and Fixing of Plate 275x12mm

Providing and Fixing of Plate 364x8mm

Providing and Fixing of Plate 275x10mm

Providing and Fixing of SS Plate 100x8mm

Providing and Fixing of Plate 45x20mm

Providing and Fixing of Plate 100x10mm

Providing and Fixing of Plate 350x350x16mm

Providing and Fixing of J Anchor 16 OD x 440mm Long

Providing and Fixing of Anchor 16 OD x 275mm Long

Providing and Fixing of J Bolt M-20 x 600mm Long

Providing and Fixing of J Anchor 16 OD x 360mm Long

Providing and Fixing of ISST 200mm

Providing and Fixing of ISMB 250x125mm

Providing and Fixing of ISMB 250x125mm

Providing and Fixing of SS Plate 80x8mm

Providing and Fixing Anchor 16 OD x 200 Long

Providing and Fixing Five Bay Column, Deck and Staircase

Providing and Fixing Two Bay Column, Deck and Staircase

Supply of multi purpose Synthetic hetiv grease

Supply of Diesel

Supply of Mobil Oil

Excavation in Soil (any type) using Hydraulic Excavator CK 90 with hydraulic excavator of 0.9 cum bucket capacity including cutting, trimming bottom and side slopes, in accordance with requirements of all lines, grades and cross sections, including all lifts and leads upto 30m.

Compaction.Extra for laying earth/fly ash as per specifications in 20 cm. Layers and dressing but excluding cost of rolling. Extra for watering the earth/fly ash laid in 20 cm layers as per specifications for compaction.Extra for rolling to specifications.Complete in all respect as per drawings,designs, specifications and instructions of Engineer- in-charge. As per CSR 24.5(b) i,ii,iii

Dressing side slopes and preparation of sub grade for lining. Complete in all respect as per drawings,designs, specifications and instructions of Engineer- in-charge. As per CSR 19.2

Putting 1:3 (Cement:water) cement slurry with cement @ 2.25 kg per sqm on prepared bed and side slopes before laying concrete on bed and side slopes. Complete in all respect as per drawings, designs, specifications and instructions of Engineer- in-charge.As per CSR 19.12

Earthwork for lip cutting for lining of irrigation channels inclusive of all allowances, lead and dressing 0 to 1.5m depth

Earthwork for lip cutting for lining of irrigation channels inclusive of all allowances, lead and dressing depth exceeding 1.5 m but upto 3.0 m.

Earthwork for lip cutting for lining of irrigation channels inclusive of all allowances, lead and dressing depth exceeding 3.0 m but upto 4.5 m.

Plain cement concrete M-10 (1:3:6) nominal mix in foundation with crushed stone aggregate 40mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.

Reinforced Cement Concrete M-25 with Batching Plant, Transit Mixer and Concrete Pump in Open Foundation complete as per Drawing and Technical Specifications

Reinforced Cement Concrete M-25 with Batching Plant, Transit Mixer and Concrete Pump in sub-structure complete as per Drawing and Technical Specifications (height upto 5m)

Reinforced Cement Concrete M-20 with Batching Plant, Transit Mixer and Concrete Pump in Open Foundation complete as per Drawing and Technical Specifications

Plain cement concrete M-15 in Sub Structure complete as per Drawing and Technical Specifications.

Supply, fitting and placing HYSD bar reinforcement in sub structure complete as per drawing and technical specifications. CSR 21.33 item

Cement concrete lining 75 mm Thick or Less laid manually in sleepers and safety ladder for irrigation channels, using cement concrete M-15 with cement content 325 kg/cum mixed in an automatic computerized Batching & Mixing Plant and transported to the site in transit mixers with an average lead of 1 Km As per CSR 19.4

Making dewatering arrangement by pumping set 4"x4" (Tractor driven)

Providing and fixing 150mm wide PVC water stop seal at construction/expansion joints complete in all respect.

Back filling with Sandy material behind abutment, wing wall and return wall complete as per drawing and Technical Specifications.

Filling stones into crates and hand packing i/c supply of boulder stones as per P.W.D. specifications (weight of boulder stone 18 to 40 kg should not be less than 90% and weight of boulder stones 3.6 to 18 kg should not exceed 10%) including loading and unloading and stacking complete in all respect

Weaving wire netting for wire crates including supply of M.S. Annealed wire 4mm dia confirming to I.S. specification with latest amendment if any binding sides and partitions to make crates of 15cmx15cm mesh size complete in all respect

Steel work, fixed independently without connecting plates, including cutting, hoisting and fixing in position for Flats complete in all respect.

Providing and fixing Stainless steel nut and bolts of all sizes & length required

Applying priming coat with metal primer on new steel or iron work including preparation of surface.as per CSR 16.20

Painting two or more coats excluding priming coat with synthetic enamal paint in all shades front work surfaces in all shades on steel or iron work as per CSR 16.17

Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification Includes Mazdoor required for trimming of slope to proper profile and preparation of bed. As per CSR 22.26

Grouting stone filling or pitching (a)With bajri or shingle. As CSR 23.45 (a)

Shuttering for precast R.C.C. battens/cement concrete block in situ such as staggered RC blocks arrow and plain cement concrete block. For 450x450x300 mm blocks AS CSR 9.13

Any other Item

Pilot Engineering Works