Construction of New Wholesale Market Yard at Mehandali Rohru, District Shimla, H.P.

Amount

NEW L BUILDING Excavation in foundation and trenches in earth work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the engineer -in-charge at site., according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and unuseful material and transportation of the unuseful material for disposing at dumping site (To be arranged by the contractor) as per satisfaction of Engineer- in -charge through all modes of transportation including head load ,animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour ( if required ). All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation and used /removed as per the direction of the Engineer - in- charge. Any loss to the public and private propriety during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respect including all incidental charges.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing form work with steel plates 3.15mm(three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in foundation, footing, basis of column etcetra . and mass concrete complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors, roofs, landings , shelves and the like floor etcetra . upto any thickness upto all floor level as per HP.PWD. specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals.. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in Beams, cantilevers, girders and lintels, sides of soffits of beams, beams haunchings, girders, cantilevers, bressumers and lintels upto any depth /heights upto all floor level as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in Columns, pillars post and struts (square rectangular or polygonal in plain in any heights / thickness/depths etcetera upto all foor level as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in stair cases with sloping or stepped soffits excluding landings in all floor level in all heights as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work edges of slab and breaks in floor and wall under 20 cm. wide as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work Vertical surface such as wall of any thickness as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and laying damp proof course 50milimetre thick with cement concrete 1:2:4 (one cement isto two sand isto four crushed stone aggregate 20mm (Twenty millimeter nominal size) as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing and laying cement concrete 1:8:16 (One cement : six sand : sixteen crushed stone aggregate 20 mm (Twenty millimeter) nominal size) mechanically mixed and vibrated, curing complete excluding cost of form workscreed laid under floor as per HP. PWD. specifications of 1990 volume-I. including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing and laying cement concrete 1:6:12 (One cement : six sand : twelve crushed stone aggregate 40 mm (Forty millimeter) nominal size) mechanically mixed and vibrated, curing complete excluding cost of form work in foundation and plinth and as per HP. PWD. specifications of 1990 volume-I. including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing and laying cement concrete 1:1.5:3 (one cement isto one point five sand isto three crushed stone aggregate 20mm. (Twenty millimeter) nominal size) mechanically mixed and vibrated, curing complete excluding cost of form work and reinforcement for reinforced concrete work and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge in Foundation, footings bases of columns etc. and mass concrete. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying cement concrete 1:1.5:3 (one cement into one point five sand into three crushed stone aggregate 20mm. (Twenty millimeter) nominal size) mechanically mixed and vibrated, curing complete excluding cost of form work and reinforcement for reinforced concrete work and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge in columns, pillars, posts and struts. Square, rectangular or polygonal in plan, in all floor level in all heights.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government in

Providing and laying cement concrete 1:1.5:3 (one cement into one point five sand into three crushed stone aggregate 20mm. (Twenty millimeter) nominal size) mechanically mixed and vibrated, curing complete excluding cost of form work and reinforcement for reinforced concrete work and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge in suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilevers upto floor all level. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing and laying cement concrete 1:1.5:3 (one cement into one point five sand into three crushed stone aggregate 20mm. (Twenty millimeter) nominal size) mechanically mixed and vibrated, curing complete excluding cost of form work and reinforcement for reinforced concrete work and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge in stair cases with sloping or stepped soffits excluding landings in all floor level in all heights. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing and laying cement concrete 1:1.5:3 (one cement into one point five sand into three crushed stone aggregate 20mm. (Twenty millimeter) nominal size) mechanically mixed and vibrated, curing complete excluding cost of form work and reinforcement for reinforced concrete work and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge in vertical walls (any thickness but not less than 0.10m) attached pilasters, buttresses, plinth and string courses etc from top of foundation in all floor level in all heights. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing Tor/TMT steel reinforcement of TATA tiscon / SAIL / Rashtria Ispat /Jindal or its equivalent including cost of binding wire for R.C.C.work including bending, binding and placing in position complete in all floor level in all heights,and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing and laying brick work using Second class common burnt clay building bricks in super structure above plinth level in all floors up to all heights and levels in cement mortar 1:6(One cement isto Six sand) as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.

Providing and laying second class half brick masonry in common burnt clay building bricks in super structure in all levels and all heights with cement mortar 1:4 (One cement : 4 sand) and curing complete including carriage of materials labour ,tool and plants through all modes of transportation as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing and laying Random rubble masonry / polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (One cement : six sand : twelve crushed stone aggregate 20mm (Twenty millimeter nominal size) at plinth level in Cement Mortar 1:6 (One cement: six sand) and curing complete including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Stone soling tightly hand packed under floors, including watering, ramming and consolidating complete and carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts, as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing and fixing anodised aluminium work for door, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make confirming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, straight, mitred and jointed mechanically where ever required including cleats angle, aluminium, snap beading for glazing/panelling C.P. brass/stainless steel screws as per Architectural drawings and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government . a) For frames of windows and ventilators and glazed partitions.

Providing and fixing anodised aluminium work for door, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make confirming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, straight, mitred and jointed mechanically where ever required including cleats angle, aluminium, snap beading for glazing/panelling C.P. brass/stainless steel screws as per Architectural drawings and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government a) For shutters of doors windows and ventilators including providing and fixing hinges/pivots and making Provisions for fixing of fittings where ever required including the cost of PVC/ neoprene gaskets as required (fittings and glazing/ panelling shall be paid for separately)

Providing and fixing aluminium anodised grills powder coated pattern to existing window/ventilator with 80x80mm panels holes with 25x8mm thick aluminium flat in windows and ventilators including fixing with aluminium screws or bolts and nuts complete in aluminium channels base frames (aluminium channels base frames to be measured and paid for separately) including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. .The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and fixing stainless steel wire gauge using galvanised MS wire gause of I.S. gauge designation 85(eighty five) G with 0.56mm(zero point fixty six milimeter) wire mesh in aluminium door, window, ventilator shutters and partition etc with PVC/neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-In-charge (cost of aluminium snap beading shall be paid in basic item.) as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and fixing powder coated aluminum sliding door bolts dyed to required colour and shade with bolts and nuts screws etc. complete :-as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government . a)250×16mm (Two hundred fifty into sixteen millimeter)

Providing and fixing powder coated aluminium tower bolts (barrel type) dyed to required shade and colour with nut, bolt, screws etc. complete as per HPPWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government . a)200 x 10 mm (two hundred into ten millimeter)

Providing and fixing powder coated aluminium tower bolts (barrel type) dyed to required shade and colour with screws etc. complete as per HPPWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government . a)150x10 mm ( one hundred into ten millimeter )

Providing and fixing powder coated aluminium handles dyed to required colour or shade with necessary screws etc. complete as per HPPWD Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government . a)125 mm (one hundred twenty five millimeter)

Providing and fixing powder coated aluminium handles dyed to required colour or shade with necessary screws etc. complete as per HPPWD Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government . a)100 mm (one hundred millimeter)

Providing and fixing Overhead hydroulic door closer of approved brand and manufacuture of I.S.I mark for doors as par H.P. PWD sapecfication 1990 Vol. 1 including carriage of all labours equiptment and material to various location through all modes of transportation in all leads and lift includig all incidental charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing and fixing 100mm bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness completeas as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment

Providing and fixing 200mm(one hundred fifty milimeter powder coated aluminium hooks and Eyes of 6mm (six milimeter) dia with necessary screws etc. complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges.`The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Prelaminated board bwp phenol bonded exterior/interion grade both sides. 12mm thick conforming to IS:12823 Grade I type II, in panelling fixed in aluminium door, windows, shutterd and partation frame with CP brass/ stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in charge including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) Pre- laminated particle board with decorative lamination on both sides.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In_charge (cost of aluminium snap beading shall be paid in basic item.)Glazing with glass panes of 4 mm(four milimeter) thick-ness (weight not less than 13.10 kg/ sqm.(thirteen point ten kilgramme per squaremeter as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One) including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and fixing 6mm (Six milimeter) cement bonded particle board ceiling of approved quality with butt jointing and nail (frame work and cover fillets to be paid separately) in place of E-board for ceiling for toilet,attic and porch with Everest sheet including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying mirror polished Kota stone slab flooring 25 mm (twenty five milimeter) (table rubbed and polished)of size 550x550mm(five hundred fifty into five hundred fifty milimeter) (average) 20mm thick base of cement mortor 1:4 (one cement :four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. including rubbing and polishing complete.treling the surface with bee waz as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Kota stone (Table ruubed and polished) slab 25mm(twenty five milimeter)thick mirror polished in risers of steps, skierting dado and pillars laid on 12mm(twelve milimeter) (average) thick cement mortar 1:3(one cement:three sand) and jointed with grey cement slurry fixed with pigment to match the shade of the slabs i/c preparing of nosing i/c rubbing and granite polish finish as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying Duro stone vetrified tiles (300x300mmx10mm(three hundred into three hundred into ten milimeter) in grey/coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm(twelve milimeter) thick cement mortar 1:3 (one cement : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges. The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment

Providing and fixing 0.60mm thick prepainted steel sheet of TATA Durashine or its equivalent in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6 mm dia metre with prepainted limpet and rubber washers complete with all accessories as required as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.

Providing and fixing ridges or hips 60 cm over all with 0.45mm thick prepainted steel sheets of TATA DURASHINE or its substantial equivalent make in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating+ back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6 mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.

Providing and fixing valley 90 cm over all 0.45 mm thick prepainted steel sheet of TATA DURASHINE or its substantial eqivalent make in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6 mm dia with prepainted G.I. limpet and bitumen whashers complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.

Providing and fixing thick 15cm wide 45cm overall semicircular plain G.I. sheet gutter with iron brackets 40*3mm 0.63mm(Zero decimal six three milimeter) plain G.I. sheet of TATA Durashine or its equivalent gutter with bolts and nuts and washers etc. including making conection with rain water pipe complete as per design including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) 0.63 mm thick sheet

Providing and fixing flushing 38 cm overall with 0.60mm thick prepainted steel sheets of TATA DURASHINE or its equivalent in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.

Providing and fixing M.S. B.P. sheet 2 mm thick in eaves board / facia / soffits / ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete (Base members of steel work shall be measured & paid separately) as per HP. PWD. Specifications of 1990 vplume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.

Providing and laying white / coloured glazed tiles of 6mm (six milimeter) thick in skirting riser of steps and dado on 12mm (twelve milimeter) thick cement mortar 1:3(one cement:three sand) and jointed with cement slurry complete in all floors and heights as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One),including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges.`The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and fixing 150mm(one hundred fifty milimeter) dia pipes on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm(four point five kilogramme per square mete. including filling the joints with approved adhesive complete.as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing PVC on wall faces PVC accessories for rain water pipes including filling the joints with approved adhesive complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) Plain bend 150mm dia.

Providing and fixing PVC on wall faces PVC accessories for rain water pipes including filling the joints with approved adhesive complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) PVC shoe 150mm dia

Providing and fixing 150mm dia M.S. sheet clamps for PVC pipes with steel screws and rawl plugs complete including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts as per direction of Engineer-in- Charge. The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.

Providing laying steel work of TATA,SAIL or RASHTRIYA ISPAT or its substantial equivalent make welded in built up section/ hollow section trusses & framed work, including cutting,hoisting & fixing in position including applying a priming coat of red lead paint in beams joists channels, angles, tee,flats with connecting plates or angle cleats as in main and cross beams, hip and rafters,purlins connected to common rafters and the like as per HP. PWD. Specifications of 1990 vplume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment. a) In trusses and trussed purlins in buildings.

Providing laying steel work of TATA,SAIL or RASHTRIYA ISPAT or its equivalent welded in built up section/ hollow section trusses & framed work, including cutting,hoisting & fixing in position including applying a priming coat of red lead paint in beams joists channels, angles, tee,flats with connecting plates or angle cleats as in main and cross beams, hip and rafters,purlins connected to common rafters and the like as per HP. PWD. Specifications of 1990 vplume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) In grating,framed guards,bars ladders,railing brackets and similar works.

Providing and fixing moulded hand rail of M.S. hollow pipe 50mm(fifty milimeter) dia welded in straight lenght over M.S. flat at top of vertical balusters including one coat of red oxide priming coat complete (M.S. flat & balusters of railings shall be mesaured & paid separetely as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Supplying and fixing rolling shutter of approved make of 80mm x 1.25mm MS laths inter- locked together through their entire length and joined together at the end by end locks mounted on brackets side guides and arrangements for inside and out side locking with push pull operation complete but excluding the cost of the top cover and spring.. as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government a) Shutter having width above 3.50 meters.

Providing and fixing ball bearing for rolling shutters complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and fixing top cover for rolling shutters. Shutters having width above 3.5( three point five ) metre. complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and fixing 27.5 centimeter long wire spring grade No.2 for rolling shutter complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Applying one coat of Acrylic primer (Spectrum or equivalent of Superior quality) on new concrete/masonry/plastered surfaces after and including preparing the surface by thoroughly brushing the surface free from mortar droppings and other foreign matters, sand papering the surface smooth complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Painting two coats (excluding priming coat) on new concrete / masonary / plastered surfaces with synthatic enamel paint of approved shade / brand and manufacture to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering and stopping including carriage of materials within allleads and lifts. as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Applying white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Painting two coats (excluding priming coat)on new steel and other metal surface under coat with ready mixed paint brusing to give an even shade including cleaning the surface all dirt,dust and other foreign matter:- With readymixed paint other than white as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Finishing wall with weather proof exterior grade emulsion of approved design (Apex ultima) or its equivalent on decorated wall surfaces (two coats) to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matter etc. including and papering smooth complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Distempering (two coats) with oil bound washable ditemper of approved brand and manufacture of and of required shade of undecorated ceiling/sloping surfaces to give an even shade over and including a priming coat with Alkali-resistance primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth. as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Distempering( two coats)with oil bound washable distemper of approved brand and manufacture and of orequired shade on undecodated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved branch and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

6 mm. (six milimeter) thick cement plaster in cement mortar 1:3(one cement : three sand) in ceiling an soffits of stairs as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

15mm (fifteen milimetres) thick cement plasters in single coat on rough side of brick/concrete/stone walls for interior plastering with cement mortar 1:6 (one cement isto six sand) upto all floor level including arises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

15mm (fifteen milimetres) thick cement plasters in single coat on fair side of brick/concrete/stone walls for interior plastering with cement mortar 1:6 (one cement isto six sand) upto all floor level including arises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing under layer for plinth protection of 75mm thick (unconsolidated) bed dry brick/stone aggregated 40mm nominal size with rammed and consolidated and grouted with fine sand including preparation of ground completeas per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing plinth protection 50mm (fifty millimetres) thick in cement concrete 1:3:6 (one cement : three sand: six crushed stone aggregate 20mm (twenty millimetres) nominal size) as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and fixing Rubber Dock Bumper of size 150x150x75 mm D hollow, 1 m long per piece with required accessories complete as per the archietectural drawing and satisfaction of Engineer-in-charge as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

S/H:-FENCING & PAVER BLOCKS, RATAINING WALL/CUTTING FILLING Excavation in foundation and trenches in earth work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock, with chiseling and wedging out of rock;(where blasting is prohibited) and their intermediate classification of soils including ,dewatering including pumping or bailing out of water wherever required, setting out to required lines, levels as shown on the drawing and as directed by the Engineer-in- Charge at site, according to the H.P.PWD. specification of 1990 (One thousand Nine hundred Ninety) Volume-I and sorting out useful & unuseful materials and stacking the same in all leads and lifts and transportation of the unuseful materials on approved dumping sites through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and all labour, machineries, materials, tools equipments and safety measures and incidentials necessary to complete the work by mechanized means and labour (if any required) . All usefull materials, such as stones, shingles, aggregate and slates shall be sorted to the maximum possible extent in all leads and lifts through all modes of transportation. Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects, including all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying plain concrete 1:3:6 (One cement isto three sand isto six graded crushed hard stone agreegate) 20 mm mechanically mixed, vibrated and curing complete includig form work in open foundation as per drawing and technical specification clause 802, 803, 1202 and 1203 (Eight hundred two, eight hundred three, one thousand two hundred two and ond thousand two hundred three). including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Steel work welded in built up sections of BIS specification, trusses and framed work, including cutting, hoisting in all heights and levels, fixing in position and applying a priming coat of red lead paint complete as per HPPWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. In single stanchions composed of of rolled steel joists or channeles with caps, bases splices,anglesbrackets etc.

Supply and fixing galvanized steel barbed wire 12 gauge ( IS:278-1962 Type-1) weighing 9.38 kg per 100 metres (minimum) straning and fixing to any type of standard rails,straining bolts including securing with and provision of galvanized mild steel wire, staples or steel pins etc. as directed (posts and struts of wood ,concrete, steel etc. and straining bolts shall be paid for separately). including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing GI chain link fabric fencing of required width in mesh size 50x50mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in- charge including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Painting two coats (excluding priming coat)on new steel and other metal surface under coat with ready mixed paint brusing to give an even shade including cleaning the surface all dirt,dust and other foreign matter:- With readymixed paint other than white as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

PAVER BLOCK:- Cutting in earth work in by mechanical means all heights and depths in all kinds of soils, including saturated soils comprising of pick work , Jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock (Where blasting is prohibited) and their intermediate classification of soil including, dewatring where required, setting out to required lines, levels as shown on the drawing and directed by the Engineer-in - charge at site, according to the HP.PWD. specification of 1990( One Thousand Nine Hundred ninety) Volume-I (One) and sorting out useful and unuseful matreial and Transportation of the unuseful matreial for disposing at dumping site ( To be arranged by the Contractor) as per satisfacation of Engineer -in- Charge through all modes of transportation including head load , animal load or mechnical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechnical means and labour( If required). All useful material such as stone , shingles aggregate and slates Shall be properly Stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation as per direction of the Engineer -in -charfe . The recovery for stones, weather useful or not, for the minimum quatom of 467.75 cubic meter @ Rupee 300/- Only (Rupees. Three hundred) per cubic meter Shall be effected on pro rata basis in all circumstances. Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Excavation in earth work and filling in 15 cm. layers in foundation and plinths including ramming, watering and consolidating upto all lead and lift (pick work) disposed earth is to be levelled and neatly dressed as directed by the Engineer-in- Charge at site, according to the H.P.PWD. specification of 1990 (One thousand Nine hundred Ninety) Volume-I and sorting out useful & unuseful materials and stacking the same in all leads and lifts and transportation of the unuseful materials on approved dumping sites through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and all labour, machineries, materials, tools equipments and safety measures and incidentials necessary to complete the work by mechanized means and labour (if any required) . All usefull materials, such as stones, shingles, aggregate and slates shall be sorted to the maximum possible extent in all leads and lifts through all modes of transportation. Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects, including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 (one cement:four sand: eight graded stone aggregate 40mm(forty milimete) nominal size) and curing complete excluding cost of form work in foundation and plinth as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Stone soling tightly hand packed under floors, including watering, ramming and consolidating complete and carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts, as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and laying heavy duty precast cement conrete inter locking paver blocks vibro compacted upto M-50 (M-Fifty) grade including border or kurb block grey or coloured over sub-base of concrete with 25mm ( twenty five millimeters ) thick average thickness of cement mortar 1:4 (one cement :four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing and polishing complete (Sub base concrete floor to be paid for separately) 80mm (eighty millimeters ) thick inter locking blocks as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Painting lines,dashes, arrows,letters etc. on roads, air fields and like in two coats with road marking paint , brushing including cleaning the surface of all dirt, dust and other foreign matter as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One),approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying 40mm thick Kota stone slab flooring 20mm thick base of cement mortar 1:4 (1Cement : 4 Sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. 25 mm thick complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

RETAINING WALL:- Earth work in excavation for structures in all depths as per drawings and technical specification as per clause 305.1(three hundred five point one)of MORD specifications 300(three hundred)including setting out construction of shoring and tacing removal of stumps and other deleterious materials and disposal in all leads and lifts including dressing of sides and bottom and back filling in trenches with excavated suitable materials. All work of rock cutting by blasting shall be carried out taking all necessary precautions against soil erosion, damage to hill side, water pollution etc. and to protect stability of hill side rock shall be excavated with chiseling and weding out rock (where blasting is prohibited). All earth work in excavation excluding rock excavation shall be carried out true to lines, grades, sides slopes, width, camber, super elevation and level as down on the drawings. Disposal of surfaceable cut materials in specified manner on dumping site through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and all labour, machineries, materials, tools equipments and safety measures and incidentals necessary to complete. If the foundation of the structure is in an area with stagnant water or water is met with in the excavation due to spring seepage, rain and other causes shall be removed by suitable diversion, bailing out or dewatrering and the area of the foundation or embankment shall be kept dry. Any loss to the public and private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him at his own cost in all cases. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying plain concrete 1:3:6 (One cement: three sand : six graded crushed hard stone agreegate ) 20mm nominal size mechanically mixed, vibrated and curing complete includig form work in open foundation as per drawing and technical specification clause 802, 803, 1202 and 1203(Eight hundred two, eight hundred three, one thousand two hundred two and ond thousand two hundred three) including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying plain concrete 1:2:4 20mm nominal size mechanically mixed, vibrated and curing complete includig form work in open foundation as per drawing and technical specification clause 802, 803, 1202 and 1203(Eight hundred two, eight hundred three, one thousand two hundred two and ond thousand two hundred three) including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Random rubble masonry/polygonal rubble masonry (Uncoursed/brought to courses) with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 Sand : 12 Graded stone aggregate 20mm nominal size) in cement mortar 1:6 (1 cement:6 sand) in breast walls and retaining walls. (Detail of cost per cubic metre) including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Construction of dry rubble masonry in breast wall and retaining walls revetment walls and parapets etc. with hard stone of approved quality as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing weep holes in brick masonry/stone masonry/plain reinforced concrete abutments, wing wall, return wall,with 100mm (One hundred millimeter) dia PVC pipe extending through the full width of the structures with slope of i(v):20(H) towards draining face complete as per drawing and technical specification clauses 614,709,1204.3.7,including carriage of materials through all modes of transportation with in all leads and lifts, and heights completerTimes New RomanTimes New Roman as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Back filling with granular material behind abutment, wing wall and return wall and retaining walls complete as per drawing & technical specification clause 1204.3.8:- Granular Material as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

S/H : - C/O New Check post 1 no. & Weigh Room 1 no Excavation in foundation and trenches in earth work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock, with chiseling and wedging out of rock;(where blasting is prohibited) and their intermediate classification of soils including ,dewatering including pumping or bailing out of water wherever required, setting out to required lines, levels as shown on the drawing and as directed by the Engineer-in- Charge at site, according to the H.P.PWD. specification of 1990 (One thousand Nine hundred Ninety) Volume-I and sorting out useful & unuseful materials and stacking the same in all leads and lifts and transportation of the unuseful materials on approved dumping sites through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and all labour, machineries, materials, tools equipments and safety measures and incidentials necessary to complete the work by mechanized means and labour (if any required) . All usefull materials, such as stones, shingles, aggregate and slates shall be sorted to the maximum possible extent in all leads and lifts through all modes of transportation. Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects, including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in foundation, footing, basis of column etcetra . and mass concrete complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffit of suspended floor, roofs landing and the like floors etc up to 200mm in thickness as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in beams , cantilevers giders and lintels , sides, soffit of beams, beams haunchings cantilever bressumers and lintels not exceeeeding 1 mtrs in depth as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government . The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in Columns, pillars post and struts (square rectangular or polygonal in plain in any heights / thickness/depths etcetera upto all foor level as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and laying cement concrete 1:6:12 (one cement: six sand: twelve graded stone aggregate 40mm nominal size) excluding cost of centring and shuttering in:-Foundations and plinth as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying cement concrete 1:1.5:3 (one cement isto one point five sand isto three crushed stone aggregate 20mm. (Twenty millimeter) nominal size) mechanically mixed and vibrated, curing complete excluding cost of form work and reinforcement for reinforced concrete work and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. in Foundation, footings bases of columns etc. and mass concrete.

Providing and laying cement concrete 1:1.5:3 (one cement isto one point five sand isto three crushed stone aggregate 20mm. (Twenty millimeter) nominal size) mechanically mixed and vibrated, curing complete excluding cost of form work and reinforcement for reinforced concrete work and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. in columns, pillars, posts and struts. Square, rectangular or polygonal in plan, in all floor level in all heights.

Providing and laying cement concrete 1:1.5:3 (one cement isto one point five sand isto three crushed stone aggregate 20mm. (Twenty millimeter) nominal size) mechanically mixed and vibrated, curing complete excluding cost of form work and reinforcement for reinforced concrete work and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. in suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilevers upto floor all level.

Providing Tor/TMT steel reinforcement of TATA tiscon / SAIL / Rashtria Ispat /Jindal or its equivalent including cost of binding wire for R.C.C.work including bending, binding and placing in position complete in all floor level in all heights,and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying brick work using Second class common burnt clay building bricks in super structure above plinth level in all floors up to all heights and levels in cement mortar 1:6(One cement isto Six sand) as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.

Providing and laying second class half brick masonry in common burnt clay building bricks in super structure in all levels and all heights with cement mortar 1:4 (One cement : 4 sand) and curing complete including carriage of materials labour ,tool and plants through all modes of transportation as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Stone soling tightly hand packed under floors, including watering, ramming and consolidating complete and carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts, as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing anodised aluminium work for door, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make confirming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, straight, mitred and jointed mechanically where ever required including cleats angle, aluminium, snap beading for glazing/panelling C.P. brass/stainless steel screws as per Architectural drawings and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) For frames of windows and ventilators and glazed partitions.

Providing and fixing anodised aluminium work for door, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make confirming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, straight, mitred and jointed mechanically where ever required including cleats angle, aluminium, snap beading for glazing/panelling C.P. brass/stainless steel screws as per Architectural drawings and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government a) For shutters of doors windows and ventilators including providing and fixing hinges/pivots and making Provisions for fixing of fittings where ever required including the cost of PVC/ neoprene gaskets as required (fittings and glazing/ panelling shall be paid for separately)

Prelaminated board bwp phenol bonded exterior/interion grade both sides. 12mm thick conforming to IS:12823 Grade I type II, in panelling fixed in aluminium door, windows, shutterd and partation frame with CP brass/ stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in charge including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) Pre- laminated particle board with decorative lamination on both sides.

Providing and fixing powder coated aluminum sliding door bolts dyed to required colour and shade with bolts and nuts screws etc. complete :-as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. 250×16mm (Two hundred fifty into sixteen millimeter)

Providing and fixing powder coated aluminium tower bolts (barrel type) dyed to required shade and colour with screws etc. complete as per HPPWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a)200 x 10 mm (two hundred into ten millimeter)

Providing and fixing powder coated aluminium tower bolts (barrel type) dyed to required shade and colour with screws etc. complete as per HPPWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a)150x10 mm ( one hundred into ten millimeter )

Providing and fixing powder coated aluminium handles dyed to required colour or shade with necessary screws etc. complete as per HPPWD Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. 125 mm (one hundred twenty five millimeter)

Providing and fixing powder coated aluminium handles dyed to required colour or shade with necessary screws etc. complete as per HPPWD Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. 100 mm (one hundred millimeter)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In_charge (cost of aluminium snap beading shall be paid in basic item.)Glazing with glass panes of 4 mm(four milimeter) thick-ness (weight not less than 13.10 kg/ sqm.(thirteen point ten kilgramme per squaremeter as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One) including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and laying mirror polished Kota stone slab flooring 25 mm (twenty five milimeter) (table rubbed and polished)of size 550x550mm(five hundred fifty into five hundred fifty milimeter) (average) 20mm thick base of cement mortor 1:4 (one cement :four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. including rubbing and polishing complete.treling the surface with bee waz as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 150mm(one hundred fifty milimeter) dia pipes on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm(four point five kilogramme per square mete. including filling the joints with approved adhesive complete.as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing PVC Plain bend 150mm (one hundred fifty milimeter) dia on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing PVC shoe 150mm (one hundred fifty milimeter)dia on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing PVC Clamps 150 mm (one hundred and fifty millimeter) dia clamps of approved design and jointing with anchor bolt 8mm(eight milimeter) dia and embeded in cement concrete block as per HP.PWD specification , including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

6mm (Six millimeters) cement plaster in ceiling in all floor levels with cement mortar 1:3 (One cement :three sand) including curing and carriage of materials through, labour tool and plants all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

15mm (fifteen milimetres) thick cement plasters in single coat on rough side of brick/concrete/stone walls for interior plastering with cement mortar 1:6 (one cement isto six sand) upto all floor level including arises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

15mm (fifteen milimetres) thick cement plasters in single coat on fair side of brick/concrete/stone walls for interior plastering with cement mortar 1:6 (one cement isto six sand) upto all floor level including arises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Distempering (two coats) with oil bound washable ditemper of approved brand and manufacture of and of required shade of undecorated ceiling/sloping surfaces to give an even shade over and including a priming coat with Alkali-resistance primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth. as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Distempering( two coats)with oil bound washable distemper of approved brand and manufacture and of orequired shade on undecodated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved branch and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on decorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete. as per HPPWD Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

ESMP COMPONENT Excavation in foundation and trenches in earth work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the engineer -in-charge at site., according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and unuseful material and transportation of the unuseful material for disposing at dumping site (To be arranged by the contractor) as per satisfaction of Engineer- in -charge through all modes of transportation including head load ,animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour ( if required ). All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation and used /removed as per the direction of the Engineer - in- charge. Any loss to the public and private propriety during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respect including all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Excavation in drains and channels etcetera in earth work in all kinds of classification of soil such as pick work, jumper work, pick jumper work. blasting work , jumper blasting work,soft and hard blasting and doing work in saturated soil including chiseling or wedging out rock where blasting work is prohibited or any other mixed variety of soil including shoring, strutting dewatering and pumping or bailing out water ( surface and sub soil water ) upto any depth or any quantum of water including slush which may arise during dewatering, removal of slush and stacking the serviceable and unserviceable material clear from the edges of excavation and then returning the stacked soil in 15 cm ( fifteen centimeters ) layers when required into plinths and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus unserviceable excavated earth as per HP.PWD. specifications,approved drawings, designs as per the entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Filling in plinth with sand under floor including watering, ramming ,consolidating and dressing complete as per HP.PWD. specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in foundation, footing, basis of column etcetra . and mass concrete complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and laying cement concrete 1:4:8 (1 cement: 4 sand: 8 graded stone aggregate 40 mm nominal size) mixed and vibrated mechanically and curing complete in or under water including pumping or bailing out water /dewatering removal of slush wich may arise at the time of laying under water complete excluding the cost of form work in foundation and in plinth in all depths /heights as per HPPWD specifications, approved drawings, designs as per the entire satisfaction and erection of the engineer in-charge including carriage of materials with all leads and lifts and other incidentals. The rate including of actroi, royalty, malkana, toll tax, sale tax or other taxes imposed by government.

Providing and laying cement concrete 1:1.5:3 (one cement isto one point five sand isto three crushed stone aggregate 20mm. (Twenty millimeter) nominal size) mechanically mixed and vibrated, curing complete excluding cost of form work and reinforcement for reinforced concrete work and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge in Foundation, footings bases of columns etc. and mass concrete.

Providing and laying damp proof course 50 mm thick with cement concrete 1:2:4 (1 cement:2 sand:4 graded stone aggregate 20mm nominal size) and curing complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. in Foundations,footings bases of columns and the like and mass concrete.

Providing Tor/TMT steel reinforcement of TATA tiscon / SAIL / Rashtria Ispat /Jindal or its equivalent including cost of binding wire for R.C.C.work including bending, binding and placing in position complete in all floor level in all heights,and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Brick work using Second class common burnt clay building bricks in foundation & plinth in cement mortar 1:6(one cement into six sand) as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Brick work using Second class common burnt clay building bricks in super structure above plinth level in all floors up to all heights and levels in cement mortar 1:6(One cement isto Six sand) as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing woodwork in frames of door window, clearstory, windows and other frames wrought , framed and fixed in position as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government a) kail wood (second class)

Providing and fixing flush door shutter interior grade , commericial type, core of black board construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains of cross bend and face veneers on both faces of shutter as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government . a) 30mm thick

Providing 40x3 mm flat iron hold fast including fixing to frame with 10mm diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30x10x15cm. 1:3:6 ( 1 cement : 3 sand: 6 graded stone aggregate 20mm nominal size) as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing anodized aluminum sliding door bolts with nuts and screws etcetra as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government 250x16mm.(Two hundred fifty into sixteen milimetres )

Providing and fixing powder coated aluminium tower bolts (barrel type) dyed to required shade and colour with screws etc. complete as per HPPWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. 150x10 mm ( one hundred fifty into ten millimeter )

Providing and fixing powder coated aluminium tower bolts (barrel type) dyed to required shade and colour with screws etc. complete as per HPPWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. 100 x 10 mm (one hundred into ten millimeter)

Providing and fixing aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetra complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-incharge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. 125mm ( one hundred twenty five millimeters )

Providing and fixing aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetra complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-incharge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government 100mm ( one hundred millimeters )

Cement concrete flooring 1:2:4 (1 cement : 2 sand:4 graded stone aggregate 20 mm nominal size)laid in one layer finished with a floating coat of neat Cement as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) 40 mm thick

Providing G.I sheet roofing fixed with galvanised iron J.or L. hooks bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled with white lead complete excluding the cost of purlins refters and trusses as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government a) 0.63 mm thick sheet

Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 Per kilo gram/Per square meter including filling the joints with approved adhesive complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) 100 mm dia pipe

Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 Per kilo gram/Per square meter including filling the joints with approved adhesive complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) 150 mm dia pipe

Providing laying steel work of TATA,SAIL or RASHTRIYA ISPAT or its substantial equivalent make welded in built up section/ hollow section trusses & framed work, including cutting,hoisting & fixing in position including applying a priming coat of red lead paint in beams joists channels, angles, tee,flats with connecting plates or angle cleats as in main and cross beams, hip and rafters,purlins connected to common rafters and the like as per HP. PWD. Specifications of 1990 vplume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment. a) In trusses and trussed purlins in buildings.

15 (Fifteen) millimeters thick cement plaster in single coat on the side of brick/concrete/ stone walls for interior plastering up to all heights including arises. Internal rounded angles, chamfers and/or rounded angles not exceeding 80 (Eighty) millimeters in girth and finished even and smooth in cement mortar 1:6(One cement: Six sand)as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying (to level or slopes) and jointing with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 sand) salt glazed stoneware pipes grade 'A' of the following internal diameters including testing of pipes and joints complete: as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax.. a) 200 mm

Providing and laying cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40mm nominal size) bedding for stone ware pipes of the following internal diametres, necessary from work & curing complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax.. a) 200 mm dia

Painting two coats (excluding priming coat) on new steel and other metal surface under coat with ready mixed paint brusing to give an even shade including cleaning the surface all dirt,dust and other foreign matter with readymixed paint other than white as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing Galvanised structural steel plate 200m wide 6 mm thick , welded prperly with steel posts i/c welding charges and applying a priming coat of red lead paint complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Letering with paints of apparoved brand and manufature with ready mixed paint ( white or other than white) lettres/ figures of 15 cm height etc. as per the entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax.

Providing and fixing recast RCC cover of NTC make with frame of size 450 mm dia etc. as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax,

Providing and fixing recast RCC cover of NTC make with frame of size 600*600 mm etc. as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax,

Providing and laying brick bat / brick aggregate 40 mm ( forty milimeters) in soakpit complete as per Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax,

Providing Water Supply & Sanitory Installation Excavation in foundation and trenches in earth work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock, with chiseling and wedging out of rock;(where blasting is prohibited) and their intermediate classification of soils including ,dewatering including pumping or bailing out of water wherever required, setting out to required lines, levels as shown on the drawing and as directed by the Engineer-in- Charge at site, according to the H.P.PWD. specification of 1990 (One thousand Nine hundred Ninety) Volume-I and sorting out useful & unuseful materials and stacking the same in all leads and lifts and transportation of the unuseful materials on approved dumping sites through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and all labour, machineries, materials, tools equipments and safety measures and incidentials necessary to complete the work by mechanized means and labour (if any required) . All usefull materials, such as stones, shingles, aggregate and slates shall be sorted to the maximum possible extent in all leads and lifts through all modes of transportation. Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects, including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing to wall ceiling and floors galvanized mild steel tubes (medium grade) tube 15 (Fifteen) millimeters nominal bore, fitting and clamps including making good the wall ceiling and floors ISI marked as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and fixing to wall ceiling and floors galvanized mild steel tubes (medium grade) tube 20 (Twenty) millimeters nominal bore, fitting and clamps including making good the wall ceiling and floors ISI marked as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing, fixing and laying in trenches galvanized mild steel tube 15 (Fifteen Five) millimeters nominal bore. (Medium grade) tube fitting ISI marked (earth work in trenches to be measured and paid for separately) as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing, fixing and laying in trenches galvanized mild steel tube 20 (twenty) millimeters nominal bore. (Medium grade) tube fitting ISI marked (earth work in trenches to be measured and paid for separately) as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing, fixing and laying in trenches galvanized mild steel tube 25 (twenty five) millimeters nominal bore. (Medium grade) tube fitting ISI marked (earth work in trenches to be measured and paid for separately) as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing, fixing and laying in trenches galvanized mild steel tube 32 (thirty two) millimeters nominal bore. (Medium grade) tube fitting ISI marked (earth work in trenches to be measured and paid for separately) as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Making connection of galvanized steel distribution branch with galvanized mild steel main line 20 to 40 (Twenty to Forty) millimeters nominal bore, cutting and threading the pipes complete, as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing water meter and stop cock in GMS tube of 15 (Fifteen) millimeters nominal bore 1including necessary fittings such as mild steel galvanized jam nut sockets etc. cutting and making long screws complete, ISI markedas per HP.PWD specification,including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and fixing plytheline aluminum polythylene (PE-ALPE) composite pressure pipe U.V.stabilized with carbon black confrming to IS- 15450-2004 kitee or its equivalent water supply including clamp at one metre spacing cutting fixing and making good the wall etcetera but excluding the cost of fittings (internal work ) pipes exposed on wall internal work Exposed on wall 1216 (one thousand two hundred sixteen ) (16mm O.D. pipe ) (sixteen millimeter outer dia )including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing plytheline aluminum polythylene (PE-ALPE) composite pressure pipe U.V.stabilized with carbon black confrming to IS- 15450-2004 of kitee or its equivalent water supply including clamp at one metre spacing cutting fixing and making good the wall etcetera but excluding the cost of fittings (internal work ) pipes exposed on wall internal work Exposed on wall 1620 (one thousand six hundred twenty)(20 mm OD pipe) (twenty millimeter outer dia ) including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing plytheline aluminum polythylene (PE-AL-PE) composite internal seal compressing fittings as per IS-154502004 of kitee or its equivalent for hot water supply such as tees elbows reducers connectors couplers and clamps with jointing tersting and fixing including cutting and making good the walls etc. ( This type of fitting to be used for hot water supply only ) Equal tees 1216mm (one thousand two hundred sixteen millimeters ) including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing plytheline aluminium polyethylene (PE-AL-PE) Equal tees 1620 (one thousand six hundred twenty millimeters ) including carriage of materials within all leads, lifts and other incidentals incidentals and or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.

Providing and fixing plytheline aluminium polyethylene (PEAL-PE) Reducing Tee 1620 (one thousand six hundred twenty millimeters ) all branches including carriage of materials within all leads, lifts and other incidentals incidentals and or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.

Providing and fixing plytheline aluminum polyethylene (PEAL-PE) Female branch Tee 1216x1216x15mm ( one thousand two hundred sixteen into one thousand two hundred sixteen into fifteen millimeter) thread including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government

Providing and fixing plytheline aluminum polyethylene (PEAL-PE) Female branch Tee 1620x1620x20mm ( one thousand six hundred twenty into one thousand six hundred twenty into twenty millimeter) thread including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government

Providing and fixing plytheline aluminium polyethylene (PEAL-PE) Female elbows 1216x15mm ( one thousand two hundred sixteen into fifteen millimeter) thread including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.

Providing and fixing plytheline aluminium polyethylene (PEAL-PE) Female elbows 1620x15mm ( one thousand six hundred twenty into fifteen millimeter) thread including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.

Providing and fixing plytheline aluminium polyethylene (PEAL-PE) Male thread connector 1216x15mm ( one thousand two hundred sixteen into fifteen millimeter) thread including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.

Providing and fixing plytheline aluminium polyethylene (PE-ALPE) Male thread connector 1620x15mm ( one thousand six hundred twenty into fifteen millimeter) thread including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government..

Providing and fixing plytheline aluminium polyethylene (PEAL-PE) Fe-male thread connector 1216x15mm ( one thousand two hundred sixteen into fifteen millimeter) thread including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge and type of taxes imposed by the Government and or as directed by the Engineerin-Charge and all type of taxes imposed by the Government..

Providing and fixing plytheline aluminium polyethylene (PEAL-PE) Fe-male thread connector 1620x15mm ( one thousandsix hundred twenty into fifteen millimeter) thread including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge and type of taxes imposed by the Government and or as directed by the Engineerin-Charge and all type of taxes imposed by the Government..

Providing and fixing plytheline aluminium polyethylene (PE-ALPE) Couplers 1216 ( one thousand two hundred twenty ) including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.

Providing and fixing plytheline aluminium polyethylene (PE-ALPE) Couplers 1620 ( one thousand six hundred sixteen twenty ) including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.

Providing and fixing plytheline aluminium polythylene (PE-ALPE) Reducers 1620x1216 ( one thousand six hundred twenty into one thousand two hundred sixteen ) including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.

Providing and fixing high pressure P V C ( poly vinyl chloride) spigot and socket waste ventilating pipes ISI marked including fixing with approved adhesive complete 150 mm (one hundred fifty millimeters) diameter including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-inCharge and all type of taxes imposed by the Government..

Providing and fixing various capacity.store well branded ISI marked Polythene water tank with 40 (Forty) millimetre nominal size bore galvanized Mild Steel scour tube with fitting 25 (Twenty Five) millimetre nominal bore galvanized Mild Steel overflow tube with fittings and mosquito proof coupling of approved municipal design 15 (Fifteen) millimetre nominal size ball valve and mosquito proof PVC cover with locking arrangement including providing pads of size as required for inlet and outlet tube complete ISI marked as per HP.PWD specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads lifts and all incidental charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing high pressure P V C ( poly vinyl chloride) spigot and socket waste ventilating pipes ISI marked including fixing with approved adhesive complete 110mm (one hundred ten millimeters) diameter as per HP.PWD specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads lifts and all incidental charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and fixing PVC holder bat clamps of approved design PVC pipes embedded in and including cement concrete blocks 10*10*10cm (ten into ten into ten centimeter) of 1:2:4 (one cement isto two sand isto four graded stone aggregate 20mm (twenty millimeter) nominal size) and cost of cutting holes and making good the wall etc. as per HP.PWD specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads lifts and all incidental charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government a) 150 mm ( one hundred fifty millimeter)

Providing and fixing PVC holder bat clamps of approved design PVC pipes embedded in and including cement concrete blocks 10*10*10cm (ten into ten into ten centimeter) of 1:2:4 (one cement isto two sand isto four graded stone aggregate 20mm (twenty millimeter) nominal size) and cost of cutting holes and making good the wall etc. as per HP.PWD specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads lifts and all incidental charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government a) 110 mm ( one hundred ten millimeter)

Providing and fixing PVC ISI marked floor traps of self-cleaning design including fixing with approved adhesive complete including cost of cutting and making good the walls and the floors:-110 (one hundred) millimetres diameter, as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government a) 110x 90 mm(one hundred ten into ninety milimeter.

Providing and fixing PVC ( poly vinyl chloride) single equal branch with oval access door, ISI marked insertion rubber washer 3mm ( three millimeter ) thick bolts and nuts including fixing with approved adhesive etc. complete 110mm (one hundred ten millimeter) dia meter including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-inCharge and all type of taxes imposed by the Government... a) 150 (One hundred fifty) millimetres nominal size.

Providing and fixing PVC ( poly vinyl chloride) single equal branch with oval access door, ISI marked insertion rubber washer 3mm ( three millimeter ) thick bolts and nuts including fixing with approved adhesive etc. complete 110mm (one hundred ten millimeter) dia meter including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-inCharge and all type of taxes imposed by the Government... a) 110 (One hundred ten) millimetres nominal size.

Providing and fixing PVC door bend with oval acces door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) 150 (One hundred fifty) millimetres nominal size.

Providing and fixing PVC door bend with oval acces door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) 110 (One hundred ten) millimetres nominal size.

Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etcetera complete 110mm (one hundred ten millimeters) dia meter including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.. a) 150 (One hundred fifty) millimetres nominal size.

Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etcetera complete 110mm (one hundred ten millimeters) dia meter including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.. a) 110 (One hundred ten) millimetres nominal size.

Providing and fixing PVC ( poly vinyl chloride) collars ISI marked including fixing with approved adhesive etcetera complete , 110mm (one hundred ten millimeter) dia meter including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes including fixing with approved adhesive etc. complete including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) 150 (One hundred fifty) millimetres nominal size.

Providing and fixing PVC ( poly vinyl chloride) collars ISI marked including fixing with approved adhesive etcetera complete , 110mm (one hundred ten millimeter) dia meter including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes including fixing with approved adhesive etc. complete including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) 110 (One hundred ten) millimetres nominal size.

Providing and fixing PVC ( poly vinyl chloride) plain bend ISI marked including fixing with approved adhesive etcetera complete 150mm (one hundred fifty millimeter) dia meter including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes

Providing and fixing PVC ( poly vinyl chloride) plain bend ISI marked including fixing with approved adhesive etcetera complete 110mm (one hundred ten millimeter) dia meter including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes

Providing and fixing 150 (One hundred ten ) millimetres PVC P or S trap for water closet (Squatting pan) including jointing the trap with PVC pipe with solution/adhesive, as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 150mm ( one hundred fifty milimeters ) dia meter PVC ( poly vinyl chloride) cowl complete including carriage of materials within all leads and lifts and other incidental as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 110mm ( one hundred ten milimeters ) dia meter PVC ( poly vinyl chloride) cowl complete including carriage of materials within all leads and lifts and other incidental as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing HIND WARE/CERA MAKE or its equivalent orrisa pattern vitreous china water closet squatting pan No. 20042 (Indian type W.C. pan) size 580mm (Five hundred eighty millimeters) white shade (Earth work, bed concrete, foot rest and trap to be measured and paid for separately) including carriage of materials within all leads, lifts and other incidentals and as per directions of Engineerin- charge. The rate including Sales tax, Toll tax or any other taxes imposed by the Government . a) Indian type W.C. pan

Providing and fixing viterous china wash down water closet (European type W.C pan) PRIMA No. 2090 (Two thousand Ninety) of Cera or its equivalent white shade with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1(One cement isto One sand) (Seat and cover to be measured and paid for separately), Anglo Indian (Universal Closet) ISI marked, as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges and as per directions of Engineerin- charge. The rate including Sales tax, Toll tax or any other taxes imposed by the Government .a) Anglo Indian Universal Closet

Providing and fixing vitreous China wash down,water closet European seat (PRIMA) No. 20012 of Hindware/Cera Make with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(1 cement : 1 sand) (Seat and over to be measured and paid for separately) as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) European Closet

Providing and fixing PTMT coloured/ white high density polyethylene / polypropylene HIND WARE/CERA MAKE or its equivalent poly Venyl Chloride 10 liters (ten) capacity (full flush )European standard control low level dual flushing cistern with a pair of CI or MS brackets complete with fittings such as lead valves syphon, 15mm (fifteen millimeter) nominal size PVC ball valve with polythene float, CP brass handles, unions and couplings for connection with inlet, outlet and over flow pipes 40mm (forty millimeters) dia meter including Chromium plated flush bend and cutting holes in walls and making good the same and connecting the flush bend with cistern and closet ( over flow pipe to be measured and paid for separately ) complete including carriage of materials within all leads, lifts and other incidental or as directed by the Engineerin-Charge and all type of taxes imposed by the Government. a) Viterous China

Providing and fixing plastic Seat (solid/hollow type) and cover of Cera make or its equivalent for wash down water closet with CP brass hinges and rubber buffers solid type black plastic sheet and cover, as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts and other incidental or as directed by the Engineerin-Charge and all type of taxes imposed by the Government.

Providing and fixing HIND WARE/CERA MAKE or its equivalent bowl pattern Urinal (vitreous china) of size 430x260mm(four hundred thirty into two hundred sixty milimeter) including fittings complete in all respect including brackets and all accessories as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts and other incidental or as directed by the Engineerin-Charge and all type of taxes imposed by the Government. a) Flat Back Type

Providing and fixing automatic flushing cistern of viterous china with a pair of C.I. Or M.S. brackets complete with fittings including C.I. Syphonic apparatus,mosquito proof lid, C.P. Brass unions and coupling for connections with inlet, outlet and overflow pipes including cutting holes and making good the same (overflow pipe to be measured and paid for separately) :- 5 litres capacity :-as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges or as directed by the Engineerin-Charge and all type of taxes imposed by the Government. a) Viterous china

Providing and fixing C.P. brass flush pipe /spreaders for urinal with fitting such as unions,clamps etc. (all in C.P. Brass) including cutting holes and making good the same :-15mm (fifteen milimeter) nominal bore as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges or as directed by the Engineerin-Charge and all type of taxes imposed by the Government.

Providing and fixing division plate of viterous china for urinal of white shade Hind ware Cera or its equivalent 600*300 (Six hundred into Three hundred) millimeter’s size for urinal, as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges or as directed by the Engineerin-Charge and all type of taxes imposed by the Government.

Providing and fixing vitreous China wash basin 630X450 mm centimetre of CERA, HINDWARE or its substantialy equivalent make with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) Flat Back

Providing and fixing Rubber plug for of 32 mm dia for wash basin including brackets and all accessories ISI marked as per HP.PWD specification , including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing C.P. brass waste (heavy duty ISI marked IS:8931 & 8934) for wash basin or sink including carriage of materials as per HP.PWD specification , including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. (a) 32 mm dia

Providing and fixing M.I Union 32 (Thirty Two) millimetres diameter ISI marked , complete in all respect as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 32 (Thirty Two) millimeters dia lead waste pipe ISI marked as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 100mm(one hundred milimeter) C.P. grating ISI marked as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 600mm x 450 mm bevelled edge miror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers ISI marked as per HPPWD Specifications as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 600mmx120 mm glass shelf with C .P brass and guard rail complete of approved make, fixed to wooden plugs with C. P brass screw ISI marked as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing chromium plated iron Towel Rail 600x20mm (Six hundred into twenty ) millimeters size of Cera or its equivalent, as per HP.PWD specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing chromium plated brass soap dish ISI marked as per HPPWD Specificationswith C.P. brass brackets fixed to wooden cleats with C.P. brass screws complete, including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 15mm nominal dia C.P brass bib tap ISI marked as per HPPWD Specifications with capstan head as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 15mm dia.C.P. brass pillar tap ISI marked as per HPPWD Specificationswith capstan head including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 15mm dia.C.P. brass pillar tap ISI marked as per HPPWD Specificationswith capstan head including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 15mm nominal bore P.V.C connection with brass unions 450mm length ISI marked as per HPPWD Specifications including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen milimetre)nominal bore brass full way valve with wheel complete ISI marked as per HPPWD specifications including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 20mm (twenty milimetre)nominal bore brass full way valve with wheel complete ISI marked as per HPPWD specifications including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 25mm (twenty five milimetre)nominal bore brass full way valve with wheel complete ISI marked as per HPPWD specifications including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing 32mm (thirty two milimetre)nominal bore brass full way valve with wheel complete ISI marked as per HPPWD specifications including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing PTMT fancy bib cock 20 mm of approved quality and colour complete ISI marked as per HPPWD Specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing PTMT reducer for push cock of approved quality and colour (20mm x15mm ) (twenty milimeters into fifteen milimeters) ISI marked as per HPPWD specifications including carriage of materials within all leads and lifts and other incidental or as directed by the Engineer-inCharge and all type of taxes imposed by the Government.

Providing and fixing PTMT angle cock 15 mm with flange ISI marked as per HPPWD Specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing PTMT jet spray of approved quality and colour with 1. mtr tube. as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing C.P. grab bar 750 mm long ,40mm dia steel pipe at 78cm height with MS plate ISI marked as per HPPWD Specifications as per detail as the position of seat and wash basin complete including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Constructing manhole with RCC top slab in 1:2:4 mix in ( 1 Cement : 2 sand : 4 graded stone aggregate 20mm nominal size) foundation Concrete 1:4:8 ( 1 cement : 4 sand : 8 graded stone aggregate 40mm nominal size) inside plastering 15mm thick with cement mortar 1 : 3 ( 1 Cement : 3 sand ) finished with a floating coat of neat cement and making channels in concrete 1:2:4 mix ( 1 cement : 2 sand : 4 graded stone aggregates 20mm nominal size ) finished smooth complete including curing and testing :- (1) Inside size 800mm x 800mm and 500mm deep including C.I cover with frame ( light duty single seal pattern - 1 ) 455mm x 610mm internal dimentions total Weight of cover and frame to be not less than 38 kg ( Weight of cover 23kg and weight of frame 15kg). ( a) With 200mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 ( 1 cement : 3 sand ) including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Constructing manhole with RCC top slab in 1:2:4 mix in ( 1 Cement : 2 sand : 4 graded stone aggregate 20mm nominal size) foundation Concrete 1:4:8 ( 1 cement : 4 sand : 8 graded stone aggregate 40mm nominal size) inside plastering 15mm thick with cement mortar 1 : 3 ( 1 Cement : 3 sand ) finished with a floating coat of neat cement and making channels in concrete 1:2:4 mix ( 1 cement : 2 sand : 4 graded stone aggregates 20mm nominal size ) finished smooth complete including curing and testing :- (1) Inside size 800mm x 800mm and 1000mm deep including C.I cover with frame ( light duty single seal pattern - 1 ) 455mm x 610mm internal dimentions total Weight of cover and frame to be not less than 38 kg ( Weight of cover 23kg and weight of frame 15kg). ( a) Wuth 200mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 ( 1 cement : 3 sand ) including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing precast RCC cover of NTC make with frame of size 455x610 mm etc. as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax,

Providing and fixing precast RCC cover of NTC make with frame of size 500 mm dia etc. as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax,

Electrical Work Excavation in all kind of earth including their intermediate classification such as Pick work, Jumper work,Blasting work,soft rock, hard rock, including chiseling/wedging out of rock where blasting is prohibited, soft rock or hard rock, including salurated conditions etc. and bailing/ pumping out water stacking the excavated materials in all leads and lifts. Wherever possible/ required by the Engineer-in-Charge clear from the edge of excavation & then returning the stacked soil in 15cm. layers,when required into plinths sides of foundations etc. consolidating each deposited layer by ramming & watering & then disposing of all surplus excavated earth in all leads and lift at the approved dumping sites as per the direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and laying cement concrete 1:6:12 (one cement: six sand: twelve graded stone aggregate 40mm nominal size) excluding cost of centring and shuttering in:-Foundations and plinth as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing form work with steel plates 3.15mm(three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in foundation, footing, basis of column etcetra . and mass concrete complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

P/L reinforced cement concrete 1:1½:3( one cement : one and half sand : three graded crushed hard stone aggregate 20 mm (twenty milimeter) nominal size) , and curing complete excluding cost of form work and reinforcement for reinforced concrete work as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government in Foundations,footings bases of columns and the like and mass concrete.

Providing and laying tor steel reinforcement for reinforced cement concrete work including bending, binding, cutting ,straighting and placing in position including cost of binding wire complete upto all floor level as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required complete with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) Group A

Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/ recessed PVC conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required complete with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface /recessed PVC conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required complete with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1No. HRFRLS / PVC insulated single core copper conductor cable of same size for earthing as required complete with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. 2x1.5 sq. mm

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1No. HRFRLS / PVC insulated single core copper conductor cable of same size for earthing as required complete with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. 2x6 sq. mm

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1No. HRFRLS / PVC insulated single core copper conductor cable of same size for earthing as required complete with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. 2x10 sq. mm

Supplying and drawing co-axial TV cable,RG-6 grade,0.7mm (75 Ohms) copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed, steel / PVC conduit as required. including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government :- 25 mm dia

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required. including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government TV. Socket outlet, modular.

Supplying & fixing following size modular base and cover plate on the existing modular metal boxes as required including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government :-2 module

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required.including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required.including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Supplying and fixing brass batten/angle holder including connections etc. as required including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government :-

Supplying and fixing call bell / buzzer, suitable for D.C./A.C. single phase , 230 volts complete as required including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Supplying and fixing following rating, three pole, manually operated, draw out pipe, air circuit breaker, micro processor based release, SR18G, open execution, in the cubical panel, making connection as etc. required. including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government 630/800Amp-50 KA; C-Power

Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation made from (50 mm x 50 mm x 6 mm thick) M.S. angle iron frame, covered with 1.6 mm thick M.S. sheet duly welded on five sides & front side hinged, complete with locking arrangement with sufficient No. vertical and horizontal intermediate switchgear supporting members each of M.S. flat 50mmx6mm thick of suitable length duly welded. The cubical pedestal shall have cable entry box at one or two sides and 4 No. legs of 50mmx50mmx6mm thick M.S. angle iron each 60 cm long including, powder coated painting and bonding to the existing earth etc., the same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government :- 450 mm deep (nominal)

Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation made from (50 mm x 50 mm x 6 mm thick) M.S. angle iron frame, covered with 1.6 mm thick M.S. sheet duly welded on five sides & front side hinged, complete with locking arrangement with sufficient No. vertical and horizontal intermediate switchgear supporting members each of M.S. flat 50mmx6mm thick of suitable length duly welded. The cubical pedestal shall have cable entry box at one or two sides and 4 No. legs of 50mmx50mmx6mm thick M.S. angle iron each 60 cm long including, powder coated painting and bonding to the existing earth etc., the same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government :- 300 mm deep (nominal)

Supplying and fixing sheet metal bus-bar chamber suitable for 100 Amp. 415 volts capacity with 4 No. aluminium alloy or wrought aluminium strip bus-bars each of length 300mm & cross-sectional area (25.4mmx3.17mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (680mmx450mmx150mm) nominal with all accessories including connections, earthing the body etc. as required including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government :-

Supplying and fixing sheet metal bus-bar chamber suitable for 400 Amp. 415 volts capacity with 4 No. aluminium alloy or wrought aluminium strip bus-bars each of length 450mm & cross-sectional area (38.10mmx6.35mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (530mmx550mmx200mm) nominal with all accessories including connections, earthing the body etc. as required including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government :-

Supplying and fixing sheet metal bus-bar chamber suitable for 800 Amp. 415 volts capacity with 4 No. aluminium alloy or wrought aluminium strip bus-bars each of length 450mm & cross-sectional area (50.80mmx9.50mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (5300mmx750mmx380mm) nominal with all accessories including connections, earthing the body etc. as required including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government :-

Supplying and fixing sheet metal bus-bar chamber suitable for 63 Amp. 415 volts capacity with 4 No. aluminium alloy or wrought aluminium strip bus-bars each of length 300mm & cross-sectional area (16mmx3.17mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (380mmx350mmx150mm) nominal with all accessories including connections, earthing the body etc. as required including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government :-

Providing and fixing following rating and breaking capacity MCCB in the existing cubical panel board including drilling holes in the cubicle panel, making connections, etc. as required including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government . 100 Amp. -16 KA

Providing and fixing following rating and breaking capacity MCCB in the existing cubical panel board including drilling holes in the cubicle panel, making connections, etc. as required including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government . 63 Amp. -25 KA

Rates of only ISI marked MCCB/ACB's have been taken in the following items, unless and otherwise specified, only such MCCB/ACB's shall be used in the work. Providing and fixing following rating and breaking capacity MCCB in the existing cubical panel board including drilling holes in the cubicle panel, making connections, etc. as required including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government . 315/400 Amp. 50 KA

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government :- Single pole. Cat-A.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government . 40 Amps. Cat-A.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government RCCB 63 Amps. Cat-A.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government :- Double door-4 way

Supplying and fixing of following way triple pole and neutral, sheet steel MCB distribution board, 415 volts, on surface / recess, with provision for 4-pole MCB/Isolator/RCCB/RCBO as incomer and SP MCBs as outgoing, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government :- Double door-6 way (8+18),horizontal type

Supplying and fixing of following way triple pole and neutral, sheet steel MCB distribution board, 415 volts, on surface / recess, with provision for 4-pole MCB/Isolator/RCCB/RCBO as incomer and SP MCBs as outgoing, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government :- Double door-8 way (8+24) horizontal type

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government :- Double door-12 way

Earthing with G.I earth pipe 4.5 mtr. long and 40mm dia, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Extra for using salt and charcoal for pipe earth electrode complete as required including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and fixing 6 SWG (4 mm dia.) G.I. wire on surface or in recess for loop earthing as required including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation sand cushioning, protective covering and refilling the trench etc. of the required size including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government :- Armoured cable 630 sq. mm (3.5 core)

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid on the surface including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government . Armoured cable 300 sq. mm (3.5 core)

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid on the surface including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government . Armoured cable 50 sq. mm (3.5 core)

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid on the surface including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government . Armoured cable 35 sq. mm (3.5 core)

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid on the surface. including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government Armoured cable 4 sq. mm (Twin core)

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid on the surface including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government . Armoured cable 95 sq. mm (3.5 core)

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government :- Ceiling Fan 1200 mm sweep, Category-A

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government :- 300 mm sweep

Extra for fixing the louvers/shutters complete with frame for exhaust fans of all sizes as required including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government :-

Suppling & Fixing, Testing,Commissioning of storage type water cooler with reciprrocating compressor of ISI marked, environment friendly new age refigerant of rugged stainless steel/ galvanized steel body. Total storage capacity 150 Lt. and cooling capacity 150 Lt/hr with 2 Each of faucets and all accessories etc . with all leads,lift of materials and other incidentals complete as directed by the Engineer in Charge. Usha ,Blue Star,Carrier or its equilant make complete in all respects with best satisfaction of Er-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

SITC of 1.8 Ton cold split type AC copper condenser including stabilizer and making connections testing etc.complete in all respects with all leads,lift of materials and other incidentals complete as directed by the Engineer in Charge.:- Make ( Voltas Cat No. 243Zyi) , Blue Star , O General, Daikin, Mitsubishi, or any other approved by Engineer-in-charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Supplying and fixing of Copper refrigerant piping with sleeve 1/2x1/4 inches with control cabling beyond 0 running meter for (Hi-wall split unit) with sleeves insulation etc. complete in all respect with best satisfaction of Engineer - in - Charge with all leads,lift of materials and other incidentals complete. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Supplying and fixing of PVC drain pipe for (Hi-wall split unit) complete in all respects with all leads,lift of materials and other incidentals complete as directed by the Engineer in Charge and with best satisfaction of Er-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Supplying and fixing of M.S stand for out door unit of suitable size(Readymade) complete in all respects with all leads,lift of materials and other incidentals complete as directed by the Engineer in Charge and with best satisfaction of Er-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Supplying installation testing and commissioning of 16.00mtr. High Mast light with steel grade 5355 as per BS-EN 10025 i/c all accessories complete, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and installation of High Wattage LED (200watts IP rating IP-66)) Flood light in white finish with anti glare polycarbonate diffuser and energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. as required. Make: Philips, Syska, Bajaj,Greatwhite, C&S, Panasonic or any other approved by Engineer-in-Charge within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and Fixing aviation obstruction light twin long in all leads/ lifts, within all leads, lifts of materials and other incidentals complete as required.as per directed by the Engineer in Charge within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Supplying and installation of High Mast control panel with one no. incomer 32A, 4 Pole MCB, 3 Pole 32A contactor 1no, 2Each 9A contactor for control panel, 1no timer analog type along with other electrical accessories . The High Mast control shall be mounted as a fabricated angle stand, within all leads,lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation ,sand cushioning, protective covering and refilling the trench etc. of the required size:-Armoured cable 16 sq. mm (four core) complete as required with all leads,lift of materials and other incidentals complete as required as per directed by the Engineer in Charge The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing LED Wall Lamp 9 Watt having gold finish fixture with plastic body .Havells, Syska, C&S, Surya & equivalent make as required as per directed by the Engineer in Charge The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing LED tube light E-lite LED Curve 20 W 6500 K cool daylight (CDL) with Polycarbonate body efficiency 100 lumens watt Syska, Havells, Syska, C&S, Surya & equivalent make as required as per directed by the Engineer in Charge The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non_x005f?return valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required:- 25 Liter capacity water Heater (Cat-A), Make : Havells, Syska, Crompton & equivalent make as required and approved by the Engineer-in-charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and fixing LED Bulkhead 6.5 W with premium quality diffuser for glarefree light and easy to install snapfit installer Havells, syska, c&s, surya & equivalent make as required and approved by the Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and fixing LED Downlight 5 W COB/SMD (LBD series) with white plastic body Make : Havells, syska, c&s, surya & equivalent make as required and approved by the Engineer-in- Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and fixing LED Suspended Light Batten with Hanging steel chain with high quality extruded aluminium housing designed for suspended mounting with white extruded acyclic Make :Havells, syska, Phillips c&s, surya & equivalent make as required and approved by the Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and fixing LED Panellight 5 W SSK-PA2343E (Light series) with white plastic body Make : Havells, syska, c&s, surya & equivalent make as required and approved by the Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing and fixing LED Street light 40 W (SMD) with white plastic body Make : Havells, syska, c&s, surya & equivalent make as required and approved by the Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing and fixing street light Tubular Pole 6 Meter with base plate section 250x250x10 mm, bracket section 1 meter long, foundation bolt of section 600x200 mm Make : Vikram Industries & equivalent make as required and approved by the Engineer-in- Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government