KMC/DG(WS)/MGPS/07/2025-26

STRIPPING OFF WORN OUT PLASTER AND RAKING OUT JOINTS OF WALLS, CELINGS ETC. UPTO ANY HEIGHT AND IN ANY FLOOR INCLUDING REMOVING RUBBISH WITHIN A LEAD OF 75M AS DIRECTED.

PLASTER (TO WALL, FLOOR, CEILING ETC.) WITH SAND AND CEMENT MORTAR INCLUDING ROUNDING OFF OR CHAMFERING CORNERS AS DIRECTED AND RAKING OUT JOINTS INCLUDING THROATING, NOSING AND DRIP COURSE, SCAFFOLDING/STAGING WHERE NECESSARY (GROUND FLOOR).[EXCLUDING COST OF CHIPPING OVER CONCRETE SURFACE](III) WITH 1:3 CEMENT MORTAR (A) 20 MM THICK PLASTER

CEMENT WASHING INCLUDING CLEANING AND SMOOTHENING SURFACE THOROUGHLY (CEMENT TO BE USED @15 KG./100 SQ.M. OF SURFACE FOR ONE COAT AND @25 KG./100 SQ.M OF SURFACE FOR TWO COATS): EXTERNAL SURFACE (GROUND FLOOR) (A) ONE COAT

SPOT APPLICATION FOR INSECTICIDES USING AQUA BASE SPRAY FOR PEST (FOR BUGS, COCKROACHES, SILVERFISH, SPIDER, TERMITES, MOSQUITOES) TO WALLS AND CEILING ETC.WITH CHEMICAL EMULSION BY ADMIXING CHLOROPYROFOS EMULSIFIABLE CONCENTRATES (1% CONCENTRATION) WITH WATER BY WEIGHT INCLUDING SPRAYING THE EMULSIFIED CHEMICAL @ 0.5 LITRES PER SQ.M. BY A HAND OPERATED PRESSURE PUMP ON WALL SURFACES, CEILING, ELECTRICAL FIXTURE,ELECTRICAL LINES INCLUDING DRILLING HOLES INPLACES WHERE SOURCE OF TERMITE IS DETECTED SQUIRTING CHEMICAL SOLUTION INTO THE HOLES AND SEALING THE HOLES WITH CEMENT GROUT.

RENDERING THE SURFACE OF WALLS AND CEILING WITH WHITE CEMENT BASED WALL PUTTY OF APPROVED MAKE AND BRAND(1.5MM THICK)

CLEANING THE WALLS AND CEILING BY SCRAPING, SAND PAPERING AND SMOOTHENING DOWN THE SURFACE INCLUDING PUTTING.

LABOUR RATES PER DIEM : MASON (HEAD).

LABOUR RATES PER DIEM : MAZDOOR (MALE)

REMOVAL OF RUBBISH,EARTH ETC. FROM THE WORKING SITE AND DISPOSAL OF THE SAME BEYOND THE COMPOUND, IN CONFORMITY WITH THE MUNICIPAL / CORPORATION RULES FOR SUCH DISPOSAL, LOADING INTO TRUCK AND CLEANING THE SITE IN ALL RESPECT AS PER DIRECTION OF ENGINEER IN CHARGE

REMOVING OLD SCALES, BLISTERS ETC. OF INTERIOR SURFACE OF WALLS, CEILING BY SCRAPING ETC. AND PREPARING SMOOTH AND EVEN SURFACE WITH RENDERING OR CEMENT MORTAR (1:2) (AS NECESSARY), TO MAKE THE SURFACE SUITABLE FOR RECEIVING DISTEMPER

APPLYING INTERIOR GRADE ACRYLIC PRIMER OF APPROVED QUALITY AND BRAND ON PLASTERED OR CENCRETE SURFACE OLD OR NEW SURFACE TO RECEIVE DISTEMPER/ ACRYLIC EMULSION PAINT INCLUDING SCRAPING AND PREPARING THE SURFACE THROUGHLY, COMPLETE AS PER MANUFACTURER'S SPECIFICATION AND AS PER DIRECTION OF THE EIC. (IN GROUND FLOOR) (B) TWO COATS I) WATER BASED INTERIOR GRADE ACRYLIC PRIMER

PAINTING WITH BEST QUALITY SYNTHETIC ENAMEL PAINT OF APPROVED MAKE AND BRAND INCLUDING SMOOTHENING SURFACE BY SAND PAPERING ETC. INCLUDING USING OF APPROVED PUTTY ETC. ON THE SURFACE, IF NECESSARY :(B) ON STEEL OR OTHER METAL SURFACE :WITH SUPER GLOSS (HI-GLOSS) -(IV) TWO COATS (WITH ANY SHADE EXCEPT WHITE)

MAKING ONE SET OF SCAFFOLDING ONLY FOR REPLACING GLASS PANELS, PAINTING, UPROOTING PLANT AND ANOTHER REPAIRING WORKS OF BUILDING AND S&P WORKS FOR EXTERNAL WORKS ONLY WITH 10 CM. DIA BAMBOO AS MAIN POSTS AT THE RATE OF 1 METRE CENTRE TO CENTRE AND 7.5 CM. DIA BAMBOO TIES @ 0.75 METRE APART FITTING AND FIXING WITH NECESSARY COIR, NAILS ETC. AS PER DIRECTION OF THE ENGINEER-INCHARGE. (THIS ITEM SHOULD BE EXECUTED ONLY AFTER PRIOR APPROVAL OF THE ENGINEER-INCHARGE). FIRSTLY, ONE NUMBER TO BE PAID AND THEN LABOUR RATE FOR SHIFTING UP TO FURTHER NINETEENTH (19) TIMES @ 10% EACH TIME TO BE CONSIDERED. IF NECESSARY FURTHER AFTER TWENTY TIMES OF TOTAL USE, ANOTHER ONE NUMBER NEW AND LABOUR RATE FOR SHIFTING TO BE CONSIDERED ACCORDINGLY A) 3.90 METRE HEIGHT

Sub Total

Please Enable Macros to View BoQ information