8112/2021-22/E8 REPAIR / MAINT OF INTERNAL WIRING, FITTING FIXTURES, INTERNAL ELECTRIFICATION (MODULAR PATTERN) FOR OFFICES, OFFRS MESSES, OFFRS SINGLE / MD ACCN, JCOS SINGLE ACCN AND CONNECTED WORKS OF UNITS AT SHESHARTANG AREA UNDER GE 860 EWS

Amount

Taking down carefully alluminium / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switchs, sockets, aluminium conductor cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed.

M&L for point wiring (Modular) complete for one light point / exhaust fan point / bell point controlled by one 1-way switch/ bell push, with 1.5 Sq mm 1100 volts grade, with and incl 1.5 Sqmm FRLS PVC insulated, unsheathed, multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, complete wiring drawn through & PVC casing and capping of 25 mm and above (as per conductor run ) medium grade, ISI marked, incl all accessories & fittings / junction boxes / inspection covers etc, with and including Metal flush box of suitable size for fixing modular switches / sockets etc and making good surface of wall and panelling etc, complete all as directed

All as per srl item no. 02 here-in-before but for one socket outlet 3 pin, 5 Amps on independent board.

All as per srl item no. 02 here-in-before but for one socket outlet 3 pin, 5 Amps on same board.

All as per srl item no.02 here-in-before but with 2.5 sq mm FRLS copper wire and with 2.5 Sqmm FRLS copper earth wire for indpendent 15 Amp point. Note: The point wiring for power point will not be mixed with light/fan point circuit or not in the same conduit.

S & F Modular switch 1 way 6A , 1 module size complete all as directed.

S & F Modular switch 1 way 16A , 1 module size complete all as directed.

S & F Modular Bell push 1 way 6A , 1 module size complete all as directed.

S & F Modular Socket , 6 A , 5 Pin , 2 module size complete all as directed.

S & F Modular Socket , 6 A / 16 A , 5 Pin , 2 module size complete all as directed.

S&F, in replacement of Modular blank plate 01 Module size complete all as directed.

S&F, in replacement of indicator lamp, red colour, 5/6 Amp complete all as directed.

S & F Modular cover plate with frame 6 module.

S & F Modular cover plate with frame 4 module.

S & F Modular cover plate with frame 3 module.

S & F Modular cover plate with frame 2 module.

S & F Modular cover plate with frame 1 module.

S & F Modular metal flush box 6 module.

S & F Modular metal flush box 4 module.

S & F Modular metal flush box 3 module.

S & F Modular metal flush box 1/2 module.

M&L point wiring complete One light / bell / exhaust fan point controlled by one no, 1-way, 5 Amps switch. with single core FRLS PVC insulated, unsheathed, multi stranded copper conductor cables 1.5 Sqmm 1100 volts grade, with and incl 1.5 Sqmm FRLS PVC insulated, unsheathed, multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, complete wiring drawn through & PVC casing and capping of 25 mm and above (as per conductor run ) medium grade, ISI marked, incl all accessories & fittings / junction boxes / inspection covers etc, with and incl concealed MS sunken box of suitable size flush with wall surface, covered with & incl 3 mm thick bakelite, laminated hylem sheet / Gang box for top cover suitable for fixing of piano type switches / sockets etc, complete all as specified and directed for the following :- (Note : The cost of MS sunken box with 3 mm thick bakelite, laminated hylem sheet top cover is deemed to be included in quoted rate.)

All as per srl item no. 22 here-in-before but for one socket outlet 3 pin, 5 Amps on independent board.

All as per srl item no. 22 here-in-before but for one socket outlet 3 pin, 5 Amps on same board.

All as per srl item no. 22 here-in-before but with 2.5 sq mm FRLS copper wire and with 2.5 Sqmm FRLS copper earth wire for indpendent 15 Amp point. Note: The point wiring for power point will not be mixed with light/fan point circuit or not in the same conduit.

S&F Switch piano type, single pole, one way, 5 amps, 230 volts, complete all as specified and directed.

S&F Socket, 5 pin, 5 Amp, universal type, 230 volts complete all as specified and as directed by Engr-in-charge.

S&F Switch piano type, single pole, one way, 15 amps, 230 volts, complete all as specified and directed

S & F Socket, 6 pin, 5/15 Amp, multipurpose shutter type, 230 volts, complete all as specified and directed.

S&F Bell push, flush type 5 amps, 230 volts complete all as specified and directed.

S&F electric call bell ding dong AC 230 volts Single Pole complete all as specified and directed.

S & F Lamp holder, metal cased, bakelite body, 230 volts, complete all as specified and directed

S&F LED lamp 10W complete all as specified and directed by the Engineer-in-Charge.

S&F Ceiling rose, two to three terminals, bakelite body, 230 volts, complete all as specified and directed.

S&F, in replacement of LED light fitting 1 X 20/22 watt (4 feet), decorative ultra slim type, with inegral driver, complete with all accessories and making necessary electric connection from ceiling rose to fitting terminal, complete all as specified and directed.

S&F, in replacement of LED light fitting 1 X 10 watt (2 feet), decorative ultra slim type, with inegral driver, complete with all accessories and making necessary electric connection from ceiling rose to fitting terminal, complete all as specified and directed.

S&F of wall mounting light fitting City 2 and incl suitable size 9W retrofit LED bulb and making necessary electric connection, complete all as specified and directed.

S&F of wall mounting light fitting, Decorative type, wall mounting, SS finish fixture with opal glass diffuser suitable and incl suitable size 10W retrofit LED bulb and making necessary electric connection, complete all as specified and directed.

S&F in replacement of recessed mounted LED light fitting of 2' x 2' size, suitable for false ceiling, 36 Watt, 6500K white light, metal body with white colour outer finish and acrylic diffuser including LED driver / transformer, spring loaded clips for easy mounting and making all electric connections complete all as directed

Supply and fixing in replacement of Energy efficient round / square recessed mounted polycarbonate fixture flat panel 12W LED 6500K white down lighter with premium white powder coating and die cast aluminium and making necessary electric connection complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in replacement of Energy efficient round / square recessed mounted polycarbonate fixture flat panel 12W LED 3000K warm white down lighter with premium white powder coating and die cast aluminium and making necessary electric connection complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in replacement of Energy efficient round recessed mounted polycarbonate fixture flat panel 6W LED 3000K warm white down lighter with premium white powder coating and die cast aluminium and making necessary electric connection complete all as specified and as directed by Engineer-in-Charge

Supply and fixing in replacement of Energy efficient round recessed mounted spot light 2W LED RED/GREEN/BLUE down lighter with premium white powder coating and die cast aluminium and making necessary electric connection complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in replacement of Energy efficient round recessed mounted spot light 2W LED RED/GREEN/BLUE down lighter with premium white powder coating and die cast aluminium and making necessary electric connection complete all as specified and as directed by Engineer-in-Charge.

S&F 22W Flexion LED strip 3000K with suitable driver and making necessary electric connection complete all as specified and as directed by Engineer-in-charge. Make : Havells Cat Part No LHEHCPP5IN1W018 or equivalent make as mentioned in particlar specifcation.

S&F in replacement LED ceiling light driver 24W to 36W, 240V and complete all as specified and directed.

S&F in replacement bulk head fittings of Environmental friendly, ultra modern, energy saving, surface mounted, decorative oval plastic bulk head fitting 15W LED 6000K luminaire comprising of high brightness LEDs, IP54 protection.

S&F plastic ventilating fan 250 mm sweep plastic body including louvers with cutting chases on brick wall and grounting with nut bolts on aluminium frame complete all as specified and directed by Engr-in-charge.

M&L for sub main wiring with two run of 4 Sqmm FRLS, PVC insulated, unsheathed and stranded copper conductor cable with and incl one run 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn in to separate concealed medium grade, ISI marked, non metallic PVC conduit 15 mm dia size incl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed. Note : 1. The cost of concealed conduit & accessories is deemed to be included in quoted rates. 2. The two run of 4 Sqmm main wire and one run of 4 Sqmm earth wire will be measured as one unit.

All as per srl item no. 49 here-in-before but with 2 run of 6.0 sq mm FR copper wire with 6.0 Sqmm FRLS copper cable as earth wire.

S&F in replacement of rectangular block of IInd class hard wood closed recessed of size 40x30x5 cm depth complete all as specified and directed by Engr-in-Charge.

S&F in replacement of rectangular block of IInd class hard wood closed recessed of size 25x20x5 cm depth complete all as specified and directed by Engr-in-Charge.

S&F in replacement of Distribution Board, double Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed.

All as per item No 53 here in before but SPN 8 way Distibution Board

All as per item No 53 here in before but SPN 4 way Distibution Board

All as per item No 53 here in before but SPN 2 way Distibution Board

S&F in replacement of MCB, C Curve type, 10 kA, 20 to 32 Amp, SPN with over load and short circuit protection, complete all as directed.

S&F in replacement of MCB, C Curve type, 10 kA, 40 to 63 Amp, SPN with over load and short circuit protection, complete all as directed.

S&F in replacement of MCB, C Curve type, 10 kA, 6 to 32 Amp, Single Pole with over load and short circuit protection, complete all as directed.

S&F, in replacement of Blanking plate of plastic, suitable for distribution board complete all as directed.

Supply, laying, testing and commissioning of LT UG cable, XLPE insulated, PVC sheathed, galvanized steel strip armoured electric power cable with stranded aluminium conductor, 1100 volts grade of size 16 sqmm 4.0 core confirming to IS:7098 (Part-I), suitable for earthed system, laid in duct/trench/along pole/wall etc including nuts, bolts, washers, saddles & screws etc and making connection, complete all as directed. Note : 1. The cost of Al thimbles/lugs and cable gland etc is included in quoted rate and no extra payment will be made for it. 2. Excavation, earth work, sand cushioning and cable cover protection will be measured and paid separately under respective items.

All as per item No 61 here in before but of size 16 sqmm 2 core

All as per item No 61 here in before but of size 10 sqmm 2 core

Excavation in trenches in hard / dense soil not exceeding 1.5 metre depth and not exceeding 1.5 metre wide and getting out including trimming of sides, complete all as directed.

M&L for un reinforced precast concrete cable cover class LV type I, flat size 250mm x 150 mm x 40 mm laid across the cable (i.e. width of cover along the length of cable) for UG cable protection on the top of the sand cushioning, complete all as directed.

M & L sand cushioning to underground cable complete all as specified in clause 19.75 of SSR Part - I.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick, complete all as specified

Removing excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point, complete all as specified.

S&F of GI pipe of 40 mm nominal dia light grade fixed to poles with clamps nuts, bolts and washers or laid under road crossing or fixed to wall including painting with two coats of aluminium paint over a coat of red oxide paint complete all as directed. Note : The cost of MS clamp, nut, bolt, washer and GI fittings etc shall be inclusive in the item rate.

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the Galvanized iron earth wire 4.0 mm dia by means of bolts, nuts , check nuts and washers of galvanized iron and steel earth wire protected by provision of GI light grade pipe 15 mm bore (7.5 m long) including provision of concrete pit made from PCC ( 1:2:4) type B-1 (using 20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angle iron 40 x 40 x 6 mm and handle of 6 mm dia MS bar made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom, 1.50 metre long placed on top edge of earth plate, common salt & charcoal filling, with fixing arrangement , funnel, wire mesh and earth work in hard/dense soil , returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 3 of SSR 1991 Part-I and connecting to CBDB’s as specified or indicated including testing on completion.

BHAT ENGINEERS

VIMAL TRADERS AND SUPPLIERS

M/S TRADE LINK

AKHTAR HUSSAIN

KEWAL SONS

M/S SHAKTI ELECTRIC WORKS