CERTAIN REPAIR TO OTM AND MD ACCN IN LAL TIKKU KHAD AREA UNDER AGE BR-II OF GE(S) MAMUN

Amount

Taking down cement plaster from brick/stone walls / concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Dismantling of old stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed.

Taking down chowkats or frames including shutters (without taking off shutters from the frame) area not exc. 1.5 Sqm each, complete all as specified and directed.

Taking down chowkats or frames including shutters (without taking off shutters from the frame) area exc. 1.5 Sqm but n exc 4.0 sqm each, complete all as specified and directed.

Taking down shutters of any description area exc. 1 sqm and not exc. 2 Sqm each, complete all as specified & directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones exc 1.5 Sqm complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for rendering 10 mm thick plaster in cement mortar 1:6 on fair face of brick work or concrete surface, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:4 on brick work or concrete surfaces of wall, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for brickwork with Fly Ash Bricks (old size), straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specifiedand directed.

M&L for non-skid ceramic jointless coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm in floor etc, set & jointed in neat cement slurry & pointed in white or coloured cement mixed with pigment to match, laid over and including 15mm thick cement screed in cement mortar 1:6, complete all as specified and directed .

M&L for non-skid ceramic jointless coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but n exc 0.38 sqm in floor etc, set & jointed in neat cement slurry & pointed in white or coloured cement mixed with pigment to match, laid over and including 15mm thick cement screed in cement mortar 1:6, complete all as specified and directed .

M&L for Vitrified ceremic tiles, polished, light shade, 8 to 9mm thick (Square/rectangular) area of each tile exc 0.42 sqm but n exc 1.00 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in cement mortar 1:6, complete all as specified & directed.

M&L for glazed ceramic coloured tiles of size 450mmx300mm, thickness 7mm as in vertical surfaces such as skirting, dado, etc., set and jointed in neat cement slurry and pointed with coloured cement to match, laid over and including 10mm thick rendering in cement mortar 1:4, complete all as specified & directed.

M&L for non skid ceramic, parking tile, heavy duty coloured Endura tile dotted, of size 300mmx300mmx10mm, top layer glazed made in any type of cement and pigment, in required patterns in floor etc set & jointed in neat cement slurry & pointed in white or coloured cement mixed with pigment to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:6 for laying floor finishes, complete all as specified and directed.

M&l for Machine cut Kota stone slab flooring not less than 18-20 mm thick (size of stone shall not less than 55cmx55cm), laid over & including 15 mm thick screed base in CM 1:6, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing machine, complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) in sub base of floors, finished even & rough to receive floor top finish complete all as specified and directed.

M&L in repairs for Machine Pressed precast concrete interlocking paver block any shape and size as approved M-35 Grade, 60mm thick confirming to IS-15658-2006 with grey cement and pigments complete all as specified & directed.

M&L for Sand filling as sand cushion under paver blocks using clean graded fine sand including levelling watering & compacting to required gradient complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in coping, bed plates benching, floor by maintaining required gradient / undulation etc slightly rounded or chamferred angles and throating, complete all as specified and directed.

M&L for Machine pressed precast coloured chequered fly ash cement concrete tiles glossy finished, of size 30cm X 30cm X 25mm thick, set, jointed & pointed in neat cement slurry with grey cement and pigment to match as in floors laid over and including 15mm thick screed bed or bedding layers in CM 1:6, complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in roof kerbs, mud stops on roof slabs upto 4 stroey building incl necessary form work and demolition of existing concrete complete all as specified and directed.

S&F Rotational moulded polyethlene water storage tanks three layers of 500 ltrs capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball, screwed for iron pipe and fixed refixing of inlet, outlet & over flow pipe etc. (Minimum weight of 20mm ball valve - 210 gms including dismantling of old broken water tank complete all as specified and as directed.

S&F pressed steel frames of size 125mmx60mm made of 1.25mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, including filling of hollow portion using PCC 1:3:6 type C-0, complete all as specified & directed.

S&F Pressed steel frames of size 105mmx60mm made of 1.25mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, including filling of hollow portion using PCC 1:3:6 type C-0, complete all as specified & directed.

M&L for preparation of new or previously untreated steel or iron surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

S&F 35mm thick 2nd class hard wood, glazed and skeleton door shutters, factory made, open rebated and prepared to receive glass or gauge etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., size of members of shutters as specified in clause 8.24 (a) of SSR Part-I, complete all as specified & directed.

S&F stainless steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with statinless steel wire staples complete all as specified and directed.

M&L for preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast / lugs / SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge and manufacturer's instructions. Note:- M.S. hold fast/ lugs fasteners shall be measured & paid for separately.

S&F factory made single extruded WPC (Wood Polymer Composit) solid both side decorative flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate & natural fibres (wood powder/rice husk/ weat husk) and non additives (maximum toxicity index of 12 for 100gms) having minimum density of 650kg/cum, and screw withdrwal strenght of 1800N (face), 900n (edge), minimum compressive strength 50 N/Sqmm , modulas of elasticity 850N/sqmm and resistence to spread of flame of Class A category with property of being termite /borer proof, water/moisture proof and fire retrdant and fixing with stainless steel butt hinges of rerquired size with necessary full body threaded star headed counter sunk SS screws all as specified and directed . Note :- i) stainless steel butt hinges and necessary SS screws shall be measured & paid separately). ii) Material manufactured by MES approved firms / ISI approved firms shall only be used in the work. IS certificate alongwith MTC to be produced before execution of work.

S&F factory made single extruded WPC (Wood Polymer Composite) solid both side decorative Flush door shutter of 35mm thickness comprising of virgin polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/ cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/ mm Sq, Modulus of elasticity 850 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws, all as per direction of Engr-in-Charge (Note Stainless steel butt hinges and necessary SS screws shall be paid separately)

S&F aluminium, anodised, barrel tower bolt of extruded section, length of bolt 150 mm and fixed complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or castaluminium alloy and fixed, complete all as specified and directed.

S&F stainless steel butt hinge 100 mm long medium weight and fixed complete all as specified.

S&F aluminium handle, anodised cast type, 150 mm size and fixed complete all as specified and directed.

S&F in repair 5 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc. 0.5 sqm in each pane iin aluminium frame complete all as specified and directed.

S&F in repair 5 mm thick sheet glass ordinary quality and glazing with oil putty in square exc. 0.5 sqm in each pane iin aluminium frame complete all as specified and directed.

S&F in repair steel water tubing 15 mm bore medium grade galvanised, with all fittings (ISI marked) fixed complete to walls, ceiling or laid in floors including taking up or down existing tubing complete all as specified and directed.

S&F in repair steel water tubing 20 mm bore medium grade galvanised, with all fittings (ISI marked) fixed complete to walls, ceiling or laid in floors including taking up or down existing tubing complete all as specified and directed.

S&F in repairs CP Brass shower rose 200x200 mm size with or without swivel joint, fixed to 15mm bore pipe complete all as specified and directed.

S&F in repairs Stop valve/Angle valve (ISI Marked), fancy type cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore ccomplete all as specified and directed.

S&F in repairs Stop valve (ISI Marked) fancy type, chromium plated cast copper alloy with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore and fixed complete all as specified and directed.

S&F in repairs bib tap 15 mm bore long body, Brass CP, fancy type (long shank), with crutch or butterfly handle screwed down, screwed for iron/PVC pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F in repairs Vitreous china wash basin white flat back, size 550 x 400 mm including waste pipe, brackets and cutting for and pining in ends of brackets or errcting stand and 32 mm dia PVC waste pipe fixed with waste coupling 32mm size full thread, all as specified and directed.

S&F in repair one piece commode Vitreous china wash down water closet pan (Pedestal pattern) white (with flushing cistern and flush pipe) but including plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel CP or aluminised hinging device complete all as specified and directed.

S&F in repairs 15mm bore pillar tap cast copper alloy with capstan head, chromium plated fancy type screwed down high pressure with or without lettered "Hot or Cold" high pressure with long screwed shanks & fly nuts screwed for iron pipe or check nuts 15mm bore complete all as specified and directed

S&F in repairs, Vitreous china squatting pan of pattern, long pan, 'Orissa pattern', size 580 x 440 mm white with integral foot rests (excl flushing cistern and flush pipe) but including provision of concrete bedding, CI floor trap etc complete all as specified and directed.

S&F in repair Vitreous china wash down water closet pan (Pedestal pattern) white (excl flushing cistern and flush pipe) but including plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel CP or aluminised hinging device complete all as specified and directed.

S&F in repair, plastic water closet seat cover, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device for pedestal pattern WC, black/ white colour complete all as specified and directed .

S&F in repairs PVC flushing cistern, 10 litre capacity incl PVC connection inlet and outlet connections, brackets PVC flush pipe with bend 32mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC all as specified and directed.

S&F in repairs Jet Spray (with 1.50 Mtr tube), fixed to EWC and angular stop cock/valve, complete all as specified and directed.

Supplied and fixed sink with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets of angle iron or fixing in cooking plateform and gape fill with white cement and connecting union to pipe over all size 915 mm x460 mm and bowl size 400mmx300mmx 180mm complete all as specified and directed.

S&F in repair health faucet with 8 mm dia,1.2 m long Rubber flexible tube with Chromium plated spring type cover & Wall Hook for water closet complete all as specified and directed.

S&F PVC connection 15 mm bore with PTMT nuts of length 600 mm long complete all as specified and directed.

S&F in repairs 32 mm dia, corrugated waste pipe suitable for WHBs/sinks including threaded PVC socket suitable for shank of waste coupling complete all as specified and directed.

S&F in repairs PVC (SWR) floor trap, dia of outlet in 75 mm, plain excluding grating, but including jointing with solvent cement complete all as specified and directed

S&F stainless steel grating doom, 150 mm with or without waste hole cpmplete all as specified and directed.

M&L for preparation of old surfaces of walls of any description including washing down, rubbing, brooming down with wire brush, scrapping down smoke, roots, moulds, salts and treading oil and greasy spots, including taking down existing grass, vegetation, small trees and making good the disturbed surface with cement mortar 1:3 and applying one coat of cement based paint, white or tinted including curing before & after paint complete all as specified and directed.

M&L for preparation of old surfaces of walls of any description including washing down, rubbing, brooming down with wire brush, scrapping down smoke, roots, moulds, salts and treading oil and greasy spots, and applying one coat of oil emulsion distamper, white or tinted including removing nails etc and making good the disturbed surface complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper, white or tinted shade including priming surface with chalk whitening, complete all as specified and directed.

M&L for preparation of newly plastered external surfaces of walls and applying two coats of cement based paint, white or tinted including curing before and after paint complete all as specified and directed.

S&F in repairs factory made Steel rolling shutters, with ball bearing, push or manual type thickness of laths 1.25 mm as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated incl taking down existing old unservicable rolling shutters with all connecting items complete all as specified and directed.

S&F in repairs factory made Steel rolling shutters, with ball bearing, gear operated type with bevel box and crank handle thickness of laths 1.25 mm as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated incl taking down existing old unserviceable rolling shutters with all connecting items, complete all as specified and directed.

S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

S&F prefabricated lock plate length not less than 2.0 m and not more than 5.0 m width not less than 1.05m and not more than 0.20m of riveted construction made out of mild steel sheet 3.15mm thick, renforced with mild steel angle 35x35x5mm size at bottom and locking arrangement wit two mm bow handle and flat iron 25x3mm to fix the lath and lock plate complete all as specified and directed.

M&L for greasing and easoning of rolling shutter of size exc 20 sqm but not exc 30 Sqm each alongwith the guide channel., helical spring anchoring rod and all other part incl necessary welding as required as to work the shutter in easy way and complete all as specifed.

S&F guide channel, made out of 3.15mm thick MS sheet size 75x30mm incl. taking down the existing guide channel from rolling shutters and fixing with wall/column etc and making good with (1:2:4) PCC and cement work (1:3) and two coates of synthetic enamel paint on over a coat of red oxide primer complete all specified.

jagdish sons (BID ID -3471753)

Bidder Name

jagdish sons

yash paul gupta