Integrated Sewerage system for Imphal City Phase II (SH Imphal sewerage Project Phase II for Imphal city zone 1, zone 6 and left out portion of Imphal Sewerage Phase-I, Package ISP P I(W))

Amount

Providing and Laying of DWC Sewer Pipes conforming to IS Code # 16098 (Part-2) : 2013 and IS 14333: 1996 or relevant IS code of Laying of DWC pipe specifications including utility shifting, excavation and transporting the excavated earth, shoring, timbering, sheet piling, dewatering etc by all means, and sand bedding, concreting, jointing, backfilling with gravels, proper compaction, and road restoration as previous condition including black topping, providing and laying of necessary fittings (specials) as per relevant IS Code and household connection (6567 nos) including all necessary materials, testing etc. complete. Provision of 2.0 m high temporary barricading with all the necessary arrangement for traffic diversion materials etc. Design, drawing and construction of pipe crossing steel truss bridges across rivers/ nallah, etc (if any) and RCC manhole including inside ladder with DI cover (1177 nos. of manholes), inspection chamber/household chamber (2189 nos.) including testing of pipe joints, fittings, valves, and disinfection of all pipes, trial run and commissioning, etc. complete. SZ-1 & 6 (ward no. 1,5,6,26,27 ) and left out portion of Sewerage Phase I: 150mm dia – 52800 m 200mm dia – 27779 m 250 mm dia – 1581 m 300 mm dia – 1525 m 400 mm dia – 1598 m Total- 85283 m

Providing and Laying of DI Sewer Pipes K-7 conforming to IS 8329 : 2000 and IS 12288:2002 specifications including utility shifting, excavation and transporting the excavated earth, sand bedding, concreting, jointing, backfilling with gravels, proper compaction, shoring, timbering, sheet piling, dewatering etc by all means and necessary road restoration as previous condition including black topping, providing and laying of DI fittings (specials) and as per relevant IS Code and household connection (covered in DWC pipes) including all necessary materials, testing etc. complete. Provision of 2.0 m high temporary barricading with all the necessary arrangement for traffic diversion materials etc. Design, drawing and construction of pipe crossing steel truss bridges across rivers/ nallah, etc (if any) and RCC manhole including inside ladder with DI cover (68 nos. of manholes), inspection chamber/household chamber including testing of pipe joints, fittings, valves, and disinfection of all pipes, trial run and commissioning, etc. complete. SZ-1 &6(IMC ward no. 1,5,6,26,27) and left out portion of Sewerage Phase I: 500 mm dia – 1375 m 600 mm dia – 457 m Total- 1832 m

Providing and laying of DI Sewer Pipes (K-9) conforming to IS 8329: 2000 and IS 12288:2002 specifications including utility shifting, excavation and transporting the excavated earth, sand bedding, concreting, jointing, backfilling with gravels and proper compaction, shoring, timbering, sheet piling, dewatering etc complete by all means and necessary road restoration as previous condition including black topping, providing and laying of DI fittings (specials) and suitable DI valves as per relevant IS Code. Provision of 2.0 m high temporary barricading with all the necessary arrangement for traffic diversion materials etc. Design, drawing and construction of pipe crossing steel truss bridges across rivers (if any), nallah (if any), etc. and RCC manhole including inside ladder with DI cover (if necessary) including testing of pipe joints (if any), fittings (if any), valves (if any) etc. and disinfection of all pipes, trial run and commissioning etc. complete. • Pumping main from MPS near ICAR Complex to STP at Lamphelpat: (i) Dia 300mm - 1200 Rm. • Pumping main from IPS at backside of High court to Sangakpham: (i) Dia 200mm - 1000 Rm. • Pumping main from IPS at Dewlahland near ISBT to Thangmeiband Watham leirak: (i) Dia 600 mm - 1400 Rm. • Pumping main from IPS at Hao Ground to Yaiskul Janmasthan: (i) 600 mm - 1400 Rm. • Pumping main from MPS at Nagaram to Chingmeirong Khongnang ani Karak: (i) Dia 300 mm - 1200 Rm. • Effluent main from STP: (i) Dia. 250 mm - 450 Rm

Providing and laying of DI Sewer Pipes (K-9) conforming to IS 8329: 2000 and IS 12288:2002 specifications including utility shifting, excavation and transporting the excavated earth, sDesign, Drawing, construction, Testing and Commissioning of intermediate pumping station of 623 cum/hr (MPS-1 of Zone-1) near ICAR complex under the command area of 6 MLD STP at Lamphelpat, Civil, Mechanical & Electrical works with all necessary requirements including joining with inlet and outlet mains etc. (i) Design, drawing and construction of suitable RCC wet well, inlet chamber, screen channels, distribution chamber, valve chamber, suitable LT/HT/metering room, transformer room, diesel generator room, inter pathway, approach road, boundary wall and fencing with gates, firefighting arrangements, landscaping, site development, water supply, sanitation, duty room, guard room etc. Providing wood works in frames of doors, windows, clerestory windows and other frames, thick panelled shutters for doors, windows and clerestory windows. Providing and fixing ball bearing for rolling shutters and hand rail by welding etc. to steel ladder railings & staircases railing including applying a priming coat of approved steel primer with iron pipes etc. complete. (ii) Supply, installation/laying, testing and commissioning of necessary Thimble mounted Sluice gate complete with Extended spindle, coupling, extended spindle , headstock and gear arrangement, Mechanical Screen complete with rake, bar screen, drive frame in SS 304 construction and frame with base frame and foundation, Manual Screen complete guide channel, Conveyor Arrangement for mechanical screen complete with chute, Submersible Motor Sewage Pump sets including duck foot bend with foundation, submersible cable , guide pipe and lifting chain (suitable with adequate standby), DI Delivery piping upto the common delivery manifold including fittings, DI Common manifold including fittings upto the Pumping station boundary limit, Rising type, CI Gate valve for each submersible pump delivery (suitable) , CI Swing type check valve for each submersible pump delivery (suitable), DI Dismantling Joint for each submersible pump delivery (suitable), Monorail complete with Chain Pulley Block and Geared Travelling Trolley (suitable), Mechanical float type level indicator with all accessories and board complete (suitable), Full bore electromagnetic flowmeter with flow transmitter/convertor including data loggers and communication interface for common delivery manifold (suitable), Double orifice kinetic type Air release valve complete with isolating sluice valve for common delivery manifold (suitable), Aluminium telescopic ladder (suitable), Pressure gauges including gauge cock for each pump delivery (suitable) etc complete. (iii) Design, Drawing and Construction of dedicated power feeder including 1 set HT Panel (suitable with standby), 1 no. Dry type Transformer (suitable), LT Panel with Capacitors and APFC Relays (1 set), Diesel Generator set (suitable with one standby) with control panel and accessories, suitable HT Cables including termination & termination, LT Cables including termination & jointing, Earthing Pit and earthing, Yard Lighting, Wiring and Illumination, Ventilation of Pump house superstructure, Safety Equipment, firefighting equipment, danger boards and rubber mats, Lightning arrestors etc complete (Length-2.0 km).

Design, Drawing, construction, Testing and Commissioning of intermediate pumping station of 295 cum/hr (MPS 1 of zone-6) at backside of High court under the command area of 6 MLD STP at Lamphelpat, Civil, Mechanical & Electrical works with all necessary requirements including joining with inlet and outlet mains etc. (i) Design, drawing and construction of suitable RCC wet well, inlet chamber, screen channels, distribution chamber, valve chamber, suitable LT/HT/metering room, transformer room, diesel generator room, inter pathway, approach road, boundary wall and fencing with gates, firefighting arrangements, landscaping, site development, water supply, sanitation, duty room, guard room etc. Providing wood works in frames of doors, windows, clerestory windows and other frames, thick panelled for doors, windows and clerestory windows. Providing and fixing ball bearing for rolling shutters and hand rail by welding etc. to steel ladder railings & staircases railing including applying a priming coat of approved steel primer with iron pipes etc. complete. (ii) Supply, installation/laying, testing and commissioning of necessary Thimble mounted Sluice gate complete with Extended spindle, coupling, extended spindle , headstock and gear arrangement, Mechanical Screen complete with rake, bar screen, drive frame in SS 304 construction and frame with base frame and foundation, Manual Screen complete guide channel, Conveyor Arrangement for mechanical screen complete with chute, Submersible Motor Sewage Pump sets including duck foot bend with foundation, submersible cable , guide pipe and lifting chain (suitable with adequate standby), DI Delivery piping upto the common delivery manifold including fittings, DI Common manifold including fittings upto the Pumping station boundary limit, Rising type, CI Gate valve for each submersible pump delivery (suitable) , CI Swing type check valve for each submersible pump delivery (suitable), DI Dismantling Joint for each submersible pump delivery (suitable), Monorail complete with Chain Pulley Block and Geared Travelling Trolley (suitable), Mechanical float type level indicator with all accessories and board complete (suitable), Full bore electromagnetic flowmeter with flow transmitter/convertor including data loggers and communication interface for common delivery manifold (suitable), Double orifice kinetic type Air release valve complete with isolating sluice valve for common delivery manifold (suitable), Aluminium telescopic ladder (suitable), Pressure gauges including gauge cock for each pump delivery (suitable) etc complete. (iii) Design, Drawing and Construction of dedicated power feeder including suitable HT Panel (suitable with one standby), 1 no. Dry type Transformer (suitable), LT Panel with Capacitors and APFC Relays (suitable) , Diesel Generator set (suitable with one standby) with control panel and accessories, Suitable HT Cables including termination & termination, LT Cables including termination & jointing, Earthing Pit and earthing, Yard Lighting, Wiring and Illumination, Ventilation of Pump house superstructure, Safety Equipment, firefighting equipment, danger boards and rubber mats, Lightning arrestors etc complete (Length-2.0 km).

Design, Drawing, construction, Testing and Commissioning of intermediate pumping station of 1899 cum/hr (PS 6 of Phase-I) at Dewlahland near ISBT under the command area of Phase-I 27 MLD STP at Lamphelpat, Civil, Mechanical & Electrical works with all necessary requirements including joining with inlet and outlet mains etc. (i) Design, drawing and construction of suitable RCC wet well, inlet chamber, screen channels, distribution chamber, valve chamber, Suitable LT/HT/metering room, transformer room, diesel generator room, inter pathway, approach road, boundary wall and fencing with gates, firefighting arrangements, landscaping, site development, water supply, sanitation, duty room, guard room etc. Providing wood works in frames of doors, windows, clerestory windows and other frames, thick panelled for doors, windows and clerestory windows. Providing and fixing ball bearing for rolling shutters and hand rail by welding etc. to steel ladder railings & staircases railing including applying a priming coat of approved steel primer with iron pipes etc. complete. (ii) Supply, installation/laying, testing and commissioning of necessary Thimble mounted Sluice gate complete with Extended spindle, coupling, extended spindle , headstock and gear arrangement, Mechanical Screen complete with rake, bar screen, drive frame in SS 304 construction and frame with base frame and foundation, Manual Screen complete guide channel, Conveyor Arrangement for mechanical screen complete with chute, Submersible Motor Sewage Pump sets including duck foot bend with foundation, submersible cable , guide pipe and lifting chain (suitable with adequate standby), DI Delivery piping upto the common delivery manifold including fittings, DI Common manifold including fittings upto the Pumping station boundary limit, Rising type, CI Gate valve for each submersible pump delivery (suitable) , CI Swing type check valve for each submersible pump delivery (suitable), DI Dismantling Joint for each submersible pump delivery (suitable), Monorail complete with Chain Pulley Block and Geared Travelling Trolley, Mechanical float type level indicator with all accessories and board complete, Full bore electromagnetic flowmeter with flow transmitter/convertor including data loggers and communication interface for common delivery manifold (suitable), Double orifice kinetic type Air release valve complete with isolating sluice valve for common delivery manifold (suitable), Aluminium telescopic ladder (suitable), Pressure gauges including gauge cock for each pump delivery (suitable) etc complete. (iii) Design, Drawing and Construction of dedicated power feeder including 1 set HT Panel (suitable with standby), 1 no. Dry type Transformer (suitable), LT Panel with Capacitors and APFC Relays , Diesel Generator set (suitable with standby) with control panel and accessories, Suitable HT Cables including termination & termination, LT Cables including termination & jointing, Earthing Pit and earthing, Yard Lighting, Wiring and Illumination, Ventilation of Pump house superstructure, Safety Equipment, firefighting equipment, danger boards and rubber mats, Lightning arrestors etc complete (Length-2.0 km).

Design, Drawing, construction, Testing and Commissioning of intermediate pumping station of 1899 cum/hr (PS-7 of Phase-I) at Chingamathak under the command area of Phase-I 27 MLD STP at Lamphelpat, Civil, Mechanical & Electrical works with all necessary requirements including joining with inlet and outlet mains etc. (i) Design, drawing and construction of suitable RCC wet well, inlet chamber, screen channels, distribution chamber, valve chamber, suitable LT/HT/metering room, transformer room, diesel generator room, inter pathway, approach road, boundary wall and fencing with gates, firefighting arrangements, landscaping, site development, water supply, sanitation etc, duty room, guard room etc. Providing wood works in frames of doors, windows, clerestory windows and other frames, thick panelled for doors, windows and clerestory windows. Providing and fixing rolling shutters and hand rail by welding etc. to steel ladder railings & staircases railing including applying a priming coat of approved steel primer with iron pipes etc. complete. (ii) Supply, installation/laying, testing and commissioning of necessary Thimble mounted Sluice gate complete with Extended spindle, coupling, extended spindle , headstock and gear arrangement, Mechanical Screen complete with rake, bar screen, drive frame in SS 304 construction and frame with base frame and foundation, Manual Screen complete guide channel, Conveyor Arrangement for mechanical screen complete with chute, Submersible Motor Sewage Pump sets including duck foot bend with foundation, submersible cable , guide pipe and lifting chain (suitable with adequate standby), DI Delivery piping upto the common delivery manifold including fittings, DI Common manifold including fittings upto the Pumping station boundary limit, Rising type, CI Gate valve for each submersible pump delivery (suitable) , CI Swing type check valve for each submersible pump delivery (suitable), DI Dismantling Joint for each submersible pump delivery (suitable), Monorail complete with Chain Pulley Block and Geared Travelling Trolley, Mechanical float type level indicator with all accessories and board complete, Full bore electromagnetic flowmeter with flow transmitter/convertor including data loggers and communication interface for common delivery manifold (suitable), Double orifice kinetic type Air release valve complete with isolating sluice valve for common delivery manifold (suitable), Aluminium telescopic ladder (suitable), Pressure gauges including gauge cock for each pump delivery (suitable) etc complete. (iii) Design, Drawing and Construction of dedicated power feeder including suitable HT Panel (suitable with standby), 1 no. Dry type Transformer (suitable), LT Panel with Capacitors and APFC Relays , Diesel Generator set (suitable with standby) with control panel and accessories, suitable HT Cables including termination & termination, LT Cables including termination & jointing, Earthing Pit and earthing, Yard Lighting, Wiring and Illumination, Ventilation of Pump house superstructure, Safety Equipment, firefighting equipment, danger boards and rubber mats, Lightning arrestors etc complete (Length-2.0 km).

Design, Drawing, construction, Testing and Commissioning of intermediate pumping station of 623 cum/hr (PS-8 of Phase-I) at Nagaram under the command area of Phase-I 27MLD STP at Lamphelpat, Civil, Mechanical & Electrical works with all necessary requirements including joining with inlet and outlet mains etc. (i) Design, drawing and construction of suitable RCC wet well, inlet chamber, screen channels, distribution chamber, valve chamber, suitable LT/HT/metering room, transformer room, diesel generator room, inter pathway, approach road, boundary wall and fencing with gates, firefighting arrangements, landscaping, site development, water supply, sanitation etc, duty room, guard room etc. Providing wood works in frames of doors, windows, clerestory windows and other frames, thick panelled for doors, windows and clerestory windows, Providing and fixing rolling shutters and hand rail by welding etc. to steel ladder railings & staircases railing including applying a priming coat of approved steel primer with iron pipes etc. complete. (ii) Supply, installation/laying, testing and commissioning of necessary Thimble mounted Sluice gate complete with Extended spindle, coupling, extended spindle , headstock and gear arrangement, Mechanical Screen complete with rake, bar screen, drive frame in SS 304 construction and frame with base frame and foundation, Manual Screen complete guide channel, Conveyor Arrangement for mechanical screen complete with chute, Submersible Motor Sewage Pump sets including duck foot bend with foundation, submersible cable , guide pipe and lifting chain (suitable with adequate standby), DI Delivery piping upto the common delivery manifold including fittings, DI Common manifold including fittings upto the Pumping station boundary limit, Rising type, CI Gate valve for each submersible pump delivery (suitable) , CI Swing type check valve for each submersible pump delivery (suitable), DI Dismantling Joint for each submersible pump delivery (suitable), Monorail complete with Chain Pulley Block and Geared Travelling Trolley, Mechanical float type level indicator with all accessories and board complete, Full bore electromagnetic flowmeter with flow transmitter/convertor including data loggers and communication interface for common delivery manifold (suitable), Double orifice kinetic type Air release valve complete with isolating sluice valve for common delivery manifold (suitable), Aluminium telescopic ladder (suitable), Pressure gauges including gauge cock for each pump delivery (suitable) etc complete. (iii) Design, Drawing and Construction of dedicated power feeder including suitable HT Panel (suitable with standby), 1 no. Dry type Transformer(suitable), LT Panel with Capacitors and APFC Relays, Diesel Generator set (suitable with standby) with control panel and accessories, Suitable HT Cables including termination & termination, LT Cables including termination & jointing, Earthing Pit and earthing, Yard Lighting, Wiring and Illumination, Ventilation of Pump house superstructure, Safety Equipment, firefighting equipment, danger boards and rubber mats, Lightning arrestors etc complete (Length-2.0 km).

Supply, Installation and testing of Vehicles and Equipment for day-to day maintenance of the sewerage system including Jetting cum Suction Machine capacity of 8000L (suitable), Small Jetting machine capacity of 1000L (6 Nos) and Small Suction Machine capacity of 2000L (6 Nos) complete.

Design, Drawing, Construction, Commissioning and trial run of different units of Sewage Treatment Plant 6 MLD (including Civil, Mechanical, Electrical) at Lamphelpat as per specification mentioned in the schedule and meeting effluent characteristics by NGT and as per items: (i) Design, Drawing, Construction and testing of primary treatment units such as receiving chambers (suitable with one standby), coarse screen chamber (suitable for mechanical and manual), inlet chamber (suitable), fine screen chamber (suitable), grit chambers (suitable) including platform, handrail and other miscellaneous works etc complete (ii) Design, drawing, construction and testing of biological treatment units such as SBR basin (suitable), chlorine contact tank (suitable), sludge sump (suitable), polyelectrolyte dosing tank (suitable), effluent treatment sump (suitable) etc. including platform, handrail, Sludge collection chamber etc and other miscellaneous works etc complete. (iii)Design, Drawing and Construction of buildings such as SBR air blower cum Motor Control Centre building (G+1), Chlorination cum chlorine tonner house (above chlorination tank), centrifuge feed pump house, centrifuge house, Suitable HT substation, staff quarters (G+1), DG set house, security cabin, approach road, boundary wall and fencing with gates, firefighting arrangements, landscaping, site development, water supply, sanitation, drains etc. complete. (iv) Supply, installation, testing and commissioning of mechanical and manual coarse screen (suitable), mechanical fine screen (suitable) and manual fine screen (suitable), suitable belt conveyer for screenings (suitable), Detritus Mechanism including Grit Collection Mechanism, Grit Classifier Mechanism & Organic Return Pumps (SS 304 wetted parts, suitable), Air Blowers with Acoustic Enclosures (Twin Lobe, Rotary, CI, suitable), Motors (suitable), Return Activated Sludge Pumps with Motors (Submersible, CI, suitable), Surplus Activated Sludge Pumps with Motors(Submersible, suitable), Decanters (Moving Weir Type, SS 304, suitable), Core components of Decanters comprising Variable Frequency Drives, Electric Motors with Gearbox, Lifting Mechanisms, Level Switches, Magnetic Switches etc. complete, Diffusers Fine Bubble Membrane, Fixed Type, PU, Air Pipe Grid for Diffusers with Pipe Supports, Hardware, Adhesives etc. complete, UPVC Pipe, SS 304 Supports , Electric Hoist with Electric Travelling Trolley for Air Blowers Suitable (suitable) Gas Chlorination System including Vacuum Chlorinators (suitable), Booster Pumps, Interconnecting Piping, Safety Equipment & other Accessories (suitable), Electric Hoist with Electric Travelling Trolley for Chlorine Tonners (Suitable), Sludge Sump Mixer 3.0 HP/700 RPM (suitable), Centrifuge Feed Pumps with Motors ,Screw, Alloy Steel (suitable), Centrifuges with Motors (SS 304 Wetted Parts, suitable), Dewatering Polyelectrolyte Dosing Pumps with Motors, Metering Type, SS 304 (suitable),Dewatering Polyelectrolyte Dosing Tank Agitators (SS 304 , suitable), Centrate Transfer Pump (Submersible, CI , suitable), suitable Electric Hoist with Electric Travelling Trolley for Centrifuges (suitable), Service Water Pumps (Horizontal Centrifugal, CI, suitable) and its motors (suitable), necessary piping, valve or sluice gates, structural steel etc. complete. (v)Design, Drawing and Construction of dedicated HT Substation including 4 – Pole Structure, Suitable HT Panel, suitable power transformers , Power Control Centre, Internal HT Cabling etc., including Motor Control Centre , Power & Control Cables with Cable Termination Kits etc. complete, Cable Trays with Fittings, Hardware & Supports etc. complete, Earthing including Earthing Pits, Earthing Materials (GI/Copper Earthing Strips, Earthing Cables, Hardware) etc. complete , Local Push Button Stations, Junction Boxes with Accessories, Hardware etc. complete , Plant Lighting (Inside Buildings and Plant Area) including Lighting Panel, Lighting Distribution Boards, Lighting Poles, Fitting & Fixtures, Cables, Hardware etc. complete , DG Set (suitable) including AMF Panel and all accessories (suitable) etc, complete. (Length-3.0 km). (vi) Supply, Installation and testing of instruments such as Pressure Gauges: Diaphragm Type (suitable with adequate standby), DO Meters: Immersion Type (suitable), Level Indicating Transmitters: Hydrostatic Type (suitable), VFD for Air Blowers (suitable), VFD for Decanters (suitable), Soft Starter for Air Blowers (suitable), Decanter Level Sensor (suitable), Decanter Position Sensor (suitable), Level Transmitters: Ultrasonic Type (suitable), Differential Level Transmitters: Ultrasonic Type (suitable), Flow Meter: Ultrasonic Type (suitable), Level Switches: Capacitance Type (suitable), PLC-Cum-Control Panel (suitable), Online 2 KVA UPS with 1/2 Hours Battery Back- up etc complete (suitable). (vii) Design, Drawing and Construction of Single Storey RCC Laboratory Building with tile flooring, anodised Aluminium Windows and Ventilators including Laboratory Equipment, Glass Wares, Reagents, Chemicals, Incubator etc. and other miscellaneous items as required for the analysis of Water Quality as per CPHEEO manual on sewerage and treatment /WHO and conforming to NABL recommended standard.

Operation & Maintenance of the above Infra Structures for a period of 7 years after commission of the project on turn- key basis.

Bhugan Infracon Pvt Ltd

US Dollar

European Dollar

Japanese Yen