REPAIR TO ROAD, RE-SURFACING, PAVEMENT TO ROADS AND ROAD FURNITURE AT VARIOUS LOCATIONS UNDER GE (AF) ADM AREA AT AF STN AGRA

Amount

M&L for repair to pot holes exceeding 30mm depth and not exceeding 1.00 sqm each including sweeping free from dust and mud, or water, scoring sunken surface in roads, paths, etc cutting around edges to at least 25mm in depth and making good by applying tack coat @ 5 Kg per 10 Sqm, putting in premixed bituminous macadam, well rammed and sealed with paving bitumen VG-30 grade@ 9.8 Kgs per 10 Sqm and blinded with 0.09 Cum of stone chipping of size 6.3mm and again well rolled with 8 to 12 tonne power roller including supply of pre-mixed macadam, binder and chipping complete all as specified and directed.

M&L for premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) with 4.0% binder content of paving bitumen any penetration VG-30 grade by weight of total mix including cement filler, on surfaces rolled compacted with using 8 to 12 tonne capacity power roller to achieve the required compactness, camber and gradent mixed in hot mix plant using design mix and laid by mechanical paver finisher complete all as specified and directed.

M&L for preparing existing black top surface or bituminous macadam surface by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc on back top/ concrete surfaces than applying evenly a priming / tack coat with paving bituminous primer VG-10 any penetration over the prepared surface by mechanical sprayer @ 5 Kgs/10 Sqm of surface complete all as specified and directed .

M&L for applying bituminous premix asphaltic semi dense concrete (SDAC), 30mm thick (consolidated thickness) with 5.5% binder content of paving bitumen any penetration of VG-30 grade by weight of total mix including cement filler on surfaces including rolled and compacted with using 8 to 12 tonne capacity power roller to achieve the required compaction, camber and gradent and mixed in hot mix plant using design mix and laid by mechanical paver finisher complete all as specified and directed .

M&L for preparation of existing bituminous surfaces, removing, dust, dirt grease and other foreign matters etc to receive the marking including thermo plastic (Reflective) line having 2.0 mm thickness (average) of uniform surface finish conforming to BS 3262 (Part 1) 1989 read in conjunction with the MORTH specification 803 clause 4.2.2 on bituminous surfaces in white/yellow colour and super imposed with glass beads confirming to BS 6088 read in conjuction with and MORTH specification 803 clause 4.3.3 complete all as specified and directed. Note - MORTH specification 803 shall be followed strictly for execution of work & suitable machine shall be used for the marking as approved by the GE. Shape & size/ patterns of marking shall be as approved by the GE.

S&F in repair cat eye /road studs made of polycarbonate moulded body with electronically welded micro prismatic lense on both side of colour- Yellow/Red/Amber for maximum retro reflection in wet and dry conditions and to be fixed with BT-69 complete all as per manufacturer instructions and approved by GE as directed. Make: series 290 of 3M or equivalent in Road Star/Dark Eyes/ Oscar/ Sinor.

S&F in repair solar cat eye of size in (mm) 125L x 125B x 25H including stem height 65mm approx housing dia cast aluminium alloy shell, fully waterproof according to IP 67, visual distance upto 500mtr with 6 super bright yellow/red/amber led (3 Nos each side) with flash frequency 2 Hz including solar panel 2.4V/0.3 watt, one Ni-Cd/Ni-mh rechargeable battery 1.2V/1600MA, temprature range 10 C to 75 C fixed on road for roadway sign complete as per manufacturer’s instruction and approved by GE as directed. Make : Model-DA 110 (DHURV) series of Dark Eye or equivalent in 3M/Road Star/ Oscar/ Sinor.

S&F in repair delineators made out of two high performance 100 mm dia, reflectors and two reflectors of 70 mm x 23 mm are fixed on both sides of Guide post. The body of Guide post is moulded in ABS plastic ( Over all size of Guide is 172mm x 325mmx 67mm thick) and it is fixed on 50mm dia heavy duty mild steel powder coated pipe of 1010 mm height. Including necessary excavation and earth work in any type of soil for fixing and embeding the delineator on ground with hold fast using PCC (1:2:4) type B1(using 20mm graded stone agregate) (minimum PCC block size 300mmx300mmx300mm) for proper grouting complete all as specified and directed. Make : Model No DA 74 in Dark Eye or equivalent in 3M/Road Star/ Oscar/ Sinor.

S&F in repair ABS plastic speed bump/speed breakers in parabolic convex shape and of size 750 mm x 250 mm x 70 mm made out of steady plastic, dovetail interlocking sub units, jointed and fixed to make the bump perfectly uniform, bump made out of precolourd material (black/yellow) and UV stablizers to keep them perfectly colourful, studded with reflectors on either side to make it clearly visible to motorists during night hours complete all as specified and directed.

S&F for road side convex mirror of size 800mm dia(material polycarbonate) mounted on MS pipe of 2.10 mtr long and dia of pipe is 80 mm embedded with PCC 1:2:4 type B-1 using (20mm stone graded aggregate) including RFR, removal and two coat of synthetic enamel paint over a coat of zinc chrome primer on MS pipe including necessary excavation and earth work in any type of soil for fixing and embeding the delineator on ground with hold fast with PCC (1:2:4) type B1(using 20mm graded stone agregate) (minimum PCC block size 300mmx300mmx 300mm) for proper grouting complete all as specified and directed.

M & L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required including demolition of kerb stone etc complete design as approved by GE and as directed .

M&L for preparation of new or previously untreated surface of cement or plastered surfaces, surfaces of any description over 10cm girth or width not otherwise described of any description and girth, not otherwise described and applying two coats of Synthetic enamel paint over a coat of priming paint complete all as specified and directed.

M&L for complete removal of extisting finishes,preparation of old decorated surface of cement or plastered surfaces of any description over 10cm girth or width, not otherwise described of any description and girth and applying two coats of synthetic enamel paint ( glossy type) over a coat of priming paint plaster as per pattern and colour approved by GE complete all as specified and directed.

Taking down machine made precast coloured interlocking tiles of any shape and size with grey cement and pigment complete all as specified and directed.

M&L for machine made precast coloured interlocking tiles of any shape and size with grey cement and pigment confirming to IS 15658 to 2006 of 60 mm thick M 35 grade laid, jointed over and including 50 mm thick sand cushioning complete all as specified and directed.

Fixing only interlocking tiles of any shape and size, laid, jointed over and including 50 mm thick sand cushioning complete all as specified and directed. Note: Interlocking Tiles received in this item shall be reused.

Demolition of concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for plain concrete Type E-2, 1:5:10 (40 mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for plain concrete Type C-2, 1:3:6 (40 mm graded stone aggregate) as in base layer complete all as specified and directed.

M&L for machine made precast interlocking tiles of any shape and size with grey cement and pigment confirming to IS 15658 of 2006 of 80 mm thickness M-40 grade laid, jointed over and including 50 mm thick sand cushioning complete all as specified and directed.

HARI BUILDERS (BID ID -3211849)

Gupta Automobiles (BID ID -3204872)