Improvement works to the 4F(P) type quarters Block 1 (4 tenements with plinth area of 3403 square feet) by replacing the existing damaged flooring with tile flooring, replacement at Kodayar Lower Camp

Amount

Dismantling the dilapidated doors, windows and ventilators and stacking including cost of all lead, lift, labour, tools and plants etc., complete.

Dismantling of Existing brick work and cleaning away from the site with lead of 20m over initial lead 10m and lift of 2m including cost of all lead, lift, labour, etc., complete.

Chipping of plastered surface and roughing the ceiling surface and clearing the debris from site including cost of all materials, labour lead, lift, T&P etc. complete.

Brick work in C.M. 1:5 using second Class ground mould Chamber bricks of size 9"x 4 3/8"x 2 3/4" including, lead, lift, labour etc., complete

Providing Centering using MS sheet including cost for strutting, cost of all materials, lead, lift, T&P etc complete.

Providing steel reinforcements to all R.C.C works as per the direction of engineer, including cost of all materials, labour for cutting, bending, placing and typing in position, lead, lift, T&P, etc., complete.

RCC 1:1.5:3 using 12mm to 20mm HBG metal for Kitchen slab including mixing charges, cost of all labour, materials, T&P, lead, lift, curing etc., complete but excluding cost of reinforcement and centering charges etc.,

Plastering with C.M. 1:5, 12mm thick including cost of all materials, curing labour lead lift complete.

Special ceiling plastering with chemical C.M. 1:3 12mm thick including cost of all materials, curing, labour lead lift etc., complete.

Clearing the damaged cement floor portion and laying PCC 1:3:6 with 20mm HBG metal and Floor Finish with cement mortar 1:5 of 20mm thick, including cost of all materials, labour, lead, lift, head load, etc., complete.

Applying two coats using Dr.Fixit (Anti leak over one coat of prime seal after thorough scrapping of roof top area including cost of all materials, lead, lift, labour, T&P, etc., Complete.

Supplying, fabricating and fixing of Solid PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter including fixing new door, lead, lift, etc., complete.

Supplying, fabricating and fixing of RCC door frame and single leaf door shutter for toilet, bath and open yard using 16mm cement bonded particle board with all round G.I. Pipe 2 Nos. patta hinges, 2 Nos. tower bolts and 2 Nos. Aluminum handles and fixing the door frame and door shutter including fixing new door, finishing including two coats of enamel paint over one coat of primer etc., complete.

Supplying, fabricating and fixing of 4 leaf steel windows required size using 35 x 35 x 5mm angle for outer frame welded with middle T of size 35 x 35 x 5mm and 12 No 12mm M.S. bar at equal spacing and using 25 x 25 x 4mm angle for shutter frame covered with 18 gauge M.S. sheet including cost of steel, hold fast, hinges, locking arrangements, dismantling old damaged windows and fixing new windows in position including painting two coats of enamel paint over one coat of red oxide primer including lead, lift, etc., complete.

Supplying and fixing of Cuddapah Slab Sink of size 600mm x 450mm x 200mm with 32mm dia 'B' Class G.I. waste water pipe & 32mm dia C.P. waste coupling. and pointed with CM 1:3 etc., complete.

Supplying and paving first quality design ceramic floor tiles Johnson or eqvalent approved colour and design of size 305mm x 305mm x 6mm thick with C.M. 1:3 20mm thick and pointing with colour cement including cost of all materials labour charges, lead, lift etc., complete.

Supplying and paving first quality design Antiskidding Tiles of Johnson or eqvalent approved colour and design of size 305mm x 305mm x 6mm thick with C.M. 1:3 20mm thick and pointing with colour cement including cost of all materials labour charges, lead, lift etc., complete.

Supplying and providing Dadooing the walls with Johnson or equivalent approved quality of wall tiles of size 150 x 150 x 6mm in C.M. 1:2, 10mm thick and pointing with white cement including cost of all materials, lead, lift, labour etc., complete.

Colour washing Exterior with two coats by using Emulsion paint after through scrapping and washing / cleaning the old surface including the cost of all materials, lead, lift, labour, T&P, etc., Complete.

Colour washing two coats using white shell lime and best quality of approved variety of colouring pigment after through scrapping and washing / cleaning the old surface including cost of lime, colouring pigments, fevicol type gum, brushes, lead, lift, labour, T&P, etc., Complete.

Enamel painting of two coats after through scrapping and washing / cleaning the old surface of door and window including the cost of all materials, lead, lift, labour, T&P etc complete.

Dismantling the existing damaged water closet and fixing in position of approved quality white Oriya type (Parry ware or Equvalent) make a water closet 20” with P or S trap and jointing New PVC 110mm pipe 6Kg/cm2 and New 3.00m Height PVC 110mm pipe Airvent pipe conecting with PVC 110 mm “T” including cost of all materials, labour, finishing the dismantled portion, lead, lift, etc., complete

Supplying , laying and joining of PVC pipes 10Kg/Cm2 and specials of approved quality Finolex(or) equivalent and best verity conforming with ISI mark, of the size with necessary specials including cost of all materials , cutting, jointing , transporting lead,lift etc. complete

20 mm PVC Pipe 10 Kg/cm2 and specials of approved quality Finolex (or) equivalent

25 mm 1” GM Valve (Heavy Duty)

15 mm PVC Water tap ISI or Equivalent (water Tech or eqvalent)

Supplying and fixing work for rain water down fall pipe of 110mm dia PVC pipe 4 Kg/Sq.Cm, including PVC bend, Elbow, clip, screw wherever necessary,cost of all materials lead lift etc., complete.

Supplying and fixing colour galvalume sheet roof of 0.47mm thick and steel tubular box section of 80x40x3mm of 1meter interval including priming coat fixing in position including the cost of all materials, labour, cutting, lap jointing with pipe by screwing, transportation, lead, lift, head load, etc complete complying with standard specification and as directed by the departmental officers approved by the Engineer incharge.

Wiring with 2 x 1.5 sqmm (22/0.3) PVC insulated unsheathed Sc Cu.Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A F.T. switch with painting of suitable colour for open PVC light point / fan point (For electronic regulator) (SD-17).

Wiring with 2x4sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 mm x 100 mm x 75mm TW switch box for 15 A 3 pin non inter locking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point. (SD-39).

Supply and fixing of 5A 3 pin and 2 pin combined flush type wall socket with 5A flush type switch on suitable TW box.(SD-133).

Supplying and fixing of 20W 4 feet LED fitting with LED of approved quality of Higher End Phillips / Crompton/ Havells or equivalent make with ISI Standard, including cost of all materials lead lift etc complete

Supply and fixing of 23 CM SL Bracket with fancy glass shade with 15W LED bulb.

Supplying and fixing of sweep (48") AC ceiling fan with requlator with 300mm down rod on the existing clamps of approved quality of Higher End Havells Crompton/ usha/bajaj including cost of all materials lead lift etc complete.(SD-111).

Supply and fixing of AC/DC 76mm Buzzer / call bell suitable for 230 volts 50 c/s. single phase AC supply on suitable T.W. Board with push switch.

Supply and fixing of service connection GI pipe of 25mm dia (Class B) bend at both ends with necessary angle iron upright and end supports for mains with including lead, lift, etc., complete.

Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V on 7/20 G.I bearer wire for service connection mains.

Supply and fixing of 20A DP plug and socket in sheet enclosure with 32A DP MCB in flush with wall including cost of all materials lead lift etc complete.(SD-140).

32 AMP DPIC Main switch.Supply and fixing of 32 Amps DP Switch of 500 V with metal clad with fuse and neutral (Side Handle) on suitable TW Board , with earth connection only (S.D-144)

Reginald Michael Dhas

guadalupe associates

SHAKTHI CONSTRUCTION