Repair and renovation of Directorate building of Sports and Physical education

Amount

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking at site. Of area beyond 3 sq. metres.

Demolishing brick work manually/by mechanical means in cement mortar including stacking of serviceable material at site and disposal of unserviceable material outside the University Campus.

Dismantling tile work in floors and roofs /walls (any thickness) laid in cement mortar and disposal of mulba outside the University Campus.

Demolishing cement concrete manually/by mechanical means including disposal of mulba outside the University Campus. (1:3:6 or richer mix)

Hire charges of welding set with welding rods including cost of welder and helper etc. complete for cutting of M.S Grill and other repair works.

Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth and in superstructure in Cement mortar 1 :4 ( 1 cement : 4 fine sand). All work upto floor V level.

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand). All work upto floor V level.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length including cost of hold fast lugs or with dash fasteners, applying a coat of wood primer and then painting with synthetic enamal paint (Two or more coats) of approved brand and manufacture (Make Asian/Nerolac).

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately including applying a coat of wood primer and then painting with synthetic enamal paint (Two or more coats) of approved brand and manufacture (Make Asian/Nerolac) 35mm thick Second class deodar wood

Providing and fixing 12 mm thick plain grade-1, medium density flat pressed three layer particle board FPT-1 or graded wood particle board FPT-1 IS : 3087 marked bonded with BWP type synthetic resin adhesive as per IS : 848 including applying a coat of wood primer and then painting with synthetic enamal paint (Two or more coats) of approved brand and manufacture (Make Asian/Nerolac)

Providing and fixing glazed shutters for doors, windows and clerestory windows using 10kg/sqcm (4mm thick) float glass panes including lSI marked M.S. pressed butt· shutters hinges bright finished of required size with necessary screws. 35mm thick Second class deodar wood including applying a coat of wood primer and then painting with synthetic enamal paint (Two or more coats) of approved brand and manufacture (Make Asian/Nerolac)

Providing and fixing 35 mm thick Second Class Deodar Wood wire gauze shutters using galvanised M.S. wire gauze of average width for aperture 1.4 mm in both directoin with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws including applying a coat of wood primer and then painting with synthetic enamal paint (Two or more coats) of approved brand and manufacture (Make Asian/Nerolac)

Labour for dismantling of aluminium partations & refxing for constructions of cabins in hall. Skilled labour (fitter) for aluminum work

-------------do--------------- Helper

Providing and fixing powder coated 50 microns aluminum work (10 gauge) for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of sliding type windows of approved make conforming to IS: 733 and IS: 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminum sections shall be smooth, rust free, straight, metered and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. For frames and shutter of door windows & ventilators including providing and fixing hinges/pivots, handles, tower bolts, eye hooks/window stays, including the cost of PVC/neoprene gasket 5mm glass panes/12mm laminated board on both sides, hydraulic door machine where ever required complete job as required. The Spacing of Vertical members not to exceed 4’-0”.

Providing and laying 40mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand 4 graded crushed stone aggregate 12. 5mm nominal size) under tile flooring.

Providing and laying (8-10 mm thick) Double charged vitrified floor/wall tiles of size 600 x 600 mm with water absorption less than 0.08% and conforming to IS: 15622 of approved make (Johnson/Kajaria/RAK ) as approved by the engg-in-charge in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 Cement: 4 coarse sand) including grouting the joints with cement and matching pigments etc complete including tucking/roughening the concrete surface as required.

Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make NITCO, ORIENT, SOMANY KAJARIA in all colour, shades size (300mm x 600mm/300mm x 450mm) as approved by Eningeer- in-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade (Two or more coats) over and including priming coat with cement primer

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work.

P/F of PVC panelling of reqd. design and make (as approved by Engineer in-charge) on walls including cost of the GI hannel on back side,edge moulding and labour for fixing of panelling complete. Nothing extra for wastage shall be paid by the Department.

Providing and fixing aluminium sliding door bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete. 250x16 mm

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. 150mm x 10mm

---------do------- 200mm x 10mm

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 125 mm

Providing and fixing aluminium casement stays ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.

Providing and fixing aluminum hanging floor door stopper ISI marked anodized (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws. Twin Rubber Stopper

Providing and fixing IS:3564 marked aluminum extruded section body tubular type universal hydraulic door closer, (having superior brand) embossed on the body, door weight upto 36-80 kg and door width upto 700-1000 mm with double speed adjustment with necessary accessories and screws etc. complete.

Supply Labour for different repair works. Plumber-II Class

----------do------------- Carpenter-II Class

------------do----------- Mazdoor

P&F white vitreous china pedestal type including providing & fixing solid plastic seat with lid (white colour) and providing and fixing low level PVC flushing cistern with manually controlled device (handle lever) conf. to IS: 7231 with fitting & fixtures-unplasticised PVC connection pipe with brass end union 45cm length and 15mm nominal bore as required complete 10 Liter Capacity-White in colour and including G.I Inlet connection for flush pipe connecting WC pan (Parry ware/ Hindware /Cera).

P/F CP brass bibcock of ‘Parko/Chilly Make’ 15mm nominal bore

P/F of C. P. Pillar cock ‘Parko/Chilly Make’ 15 mm (nominal size)

P/F CP brass angle valve for basin mixture Geyser points/washbasins of ‘Parko/Chilly Make’ 15mm nom. Bore

Providing and fixing white vitreous china size 630x450mm (Parryware/hindware/Cera) with a single 15 mm C.P brass pillar taps (Parko/Chilly) , 32mm C.P brass waste of standard pattern including painting of fittings and brackets, cutting and making good the walls wherever required.

Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P brass screws and washers complete.

Providing and fixing white vitreous china pedestal for washbasin (Parryware/Hindware/Cera) completely recessed at the back for the reception of pipes and fittings.

M/S RAVINDER KUMAR CONTRACTOR

RAJ KUMAR SALGOTRA

M/S DALJEET SINGH

Rattan Chand

M/S OM GUPTA CONTRACTOR

SUMIT SINGH