Loading
Loading…
Loading…
Tender Value
₹6.8 L
EMD Value
₹13,622
Closing Date
10 Aug 2026, 3:30 pm
Superintending Engineer
IWD IIT Kanpur
Replacement of 12 x 1.5 TR split ACs R4 1 No. M2 1 No. M6 1 NO M9 1 No. M11 2 Nos. M12 3 Nos and Production room 3 nos. with associated works at Old Media lab near SAC building of IIT Kanpur
2026_IITK_920057_1
14/AC/SE/2026/140
Open Tender
Electrical Works
Percentage
60 days
IIT Kanpur
As per tender
2 documents required · 2 mandatory
₹0
₹13,622
31 Jul 2026
31 Jul 2026
11 Aug 2026
31 Jul 2026
10 Aug 2026
31 Jul 2026
31 Jul 2026 - 7 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Supply, Installation, Testing and Commissioning of Air Cooled Hi Wall split type Air conditioners with Indoor Unit (IDU), Outdoor unit (ODU), surface / concealed copper refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.0tr (IDU to ODU) i/c drain pipe or as provided by OEM, R-32/R-410/R- 407 Green refrigerant, wireless remote control with cells, sutiable for working between 180-260 V with low & high voltage cutoff and 50 Hz , 1 phase AC supply capable of performing cooling, dehumdification, air circulation of following capacity with Scroll / rotary compressor. The system shall be able to deliver 100% of rated capacity upto 52°C . Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must Comply : Electrical cable IS 694 or IS 9968 temperature sensing control IS/ International Electro technical Commission (IEC) 60730, hermietic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per CPWD specification and IS: 1391Part ll 2023 or as required. Inverter type cooling only | |||||
| 1.1 | Inverter Type - Cooling Only | - | - | - | - |
| 1.2 | 1.5 TR with 5 star BEE rating | 12 | Nos. | 47,790 | ₹5,73,480 |
| 2 | Providing & fixing of additional refrigerant copper piping (6.3 mm 15.88mm) or (6.3 mm 12.7 mm) suitable for suction & discharge line i/c additional refrigerant R-32 /R-410 A top-up as required with 6/9 mm XLPE/Nitrile insulation with PVC tape on surface /recessed with clamps, screws etc from indoor to outdoor units as standard specifications complete as required | 40 | Mtr | 1,652 | ₹66,080 |
| 3 | Providing & fixing hard Polyvinyl Chloride (PVC) pipes, having thermal stability for cold water supply, including all UPVC / PVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer In Charge. Internal Work - Exposed on Wall - Dia of pipe 25 mm / 32 mm | 30 | Mtr | 183 | ₹5,490 |
| 4 | Providing & fixing of suitable size and type ready made iron wall/floor mounting bracket stand duly painted for ODU w/o canopy | 12 | Nos. | 1,062 | ₹12,744 |
| 5 | Providing & fixing of suitable size canopy ,for ODU, made of 25 x 3 mm angle frame with fibre Aluminium sheet with VI pad, Nut-bolt, washers etc for outdoor unit complete as required. | 10 | Nos. | 1,180 | ₹11,800 |
| 6Suplly, laying, testing and Commissioning of approved make FRLS PVC/ XLPE insulated Power / Control copper cable of on surface / recessed complete as required. | |||||
| 6.1 | 4 core x 2.5 sq mm | 40 | RMT | 236 | ₹9,440 |
| 7Providing & fixing of single phase plug top ISI marked for AC unit etc i/c dismantling old plug top if any complete as required. | |||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.05 MB
Tendernotice_2.pdf
PDF • 0.44 MB
BOQ_966882.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].