PROVN OF HARDSTANDING AND VEHICLES PARKING SHED AT PCDA(CC) LUCKNOW, COMPREHENSIVE SERVICES INCLUDING INTERNAL ELECTRIFICATION AND MISC OTHER WORKS AT PCDA(CC), PAO(OR) 11 GRRC, RTC AND REPAIR AND MAINT OF INTERNAL ELECTRIFICATION AND OTHER MISC WORK

Amount

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed

Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth for foundation and getting out in soft/loose soil etc. (including cutting of roads) or for shafts, wells, cesspits, manholes and sewage lines, pier holes, etc. not exc 10 sq m on plan and not exc 1.5 m in depth complete all as specified and directed.

M&L for broken stone or boulder hardcore of gauge not exc 63mm deposited, spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, sub base of floors including finishing the surfaces even and rough to receive the topping layer complete all as specified and directed

M&L for 75 mm thick PCC 1:4:8 type D-2 (40mm graded stone aggregate) as in sub base of floor complete all as specified and directed

M&L for 100 mm thick PCC 1:3:6 type C-1 (20mm graded stone aggregate) as in floor/ramp and finishing the surface fair and even without using extra cement complete all as specified and directed

M&L for brick work with fly ash bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 complete all as specified and directed.

M&L for rendering 15 mm thick in cement and sand mortal 1:4 on fair faces of brick wall or concrete surfaces including finished even and fair without using extra cement complete all as specifed and directed.

M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as speicifed and directed

S & F Steel work in tubular trusses vertical post including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and directed.

M & L for preparing new steel & iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified.and directed.

S&F for 0.50 mm thick pre-painted galvalume aluminium zinc alloy coated steel (550 Mpa) corrugated sheet of any colour, double ribbed trapezoidal profile in desired length etc, as in roof covering/cladding to wall, with joints overlapped and fastened with fasteners using hot dipped zinc coated self drilling hexagonal washer head fasteners complete all as specified and directed.

Returning filling in of excavated soft/loose soil including spreading leveling watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.

Removing excavated soils to a distance not exceeding 50 metres and depositing where directed at a level not exc. 1.5 metre above the starting point complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, bell, bell push, light fitting etc for taking credit and making good disturbed surfaces of walls, floors,etc complete all as specified and directed.

Taking down main switches, DBs, MCB DBs of any way or rating and making good the disturbed surfaces of walls complete all as specified and directed.

M&L for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp switch with PVC(FRLS)insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including not less than 20mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC (FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed. Note: cutting, chases for concealed point wiring and making good the surface is included in the rate quoted for item.

All as per Item No 17 above but for one 5 pin 5 Amp socket outlet point on an independent board.

All as per Item No 17 above but for one 5 pin 5 Amp socket outlet point on the same board with other switch.

All as per Item No 17 above but for One bell/ buzzer point controlled by one bell push

All as per Item No 17 above but for One light point controlled by two two way switch.

All as per Item No 17 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50sqmm and green colour earth cable of size 2.50sqmm.

S & F switch piano flush button single pole one way 5/6 Amp 240 volt complete all as specified and directed.

S & F switch piano flush button single pole one way 15/16 Amp 240 volt complete all as specified and directed.

S&F switch piano flush button single pole two way 5/6 Amp 240 volt complete all as specified and directed.

S&F socket outlet flush type multipurpose 2 in1, 3 pin 5/6 Amp, 240 volts complete all as specified and directed.

S&F socket outlet flush type multipurpose 2 in 1, 5 pin 15/16 Amp, 240 volts complete all as specified and directed.

S&F ceiling rose surface bakelite three terminal complete all as specified and directed.

S&F Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

S&F bell push single pole one way 5 Amp, 240 volt flush type complete all as specified and directed.

S&F in repair call bell AC single pole 240 volt ding dong type complete all as specified and directed.

S&F modular switches 1 way 6A,1 module complete all as specified and directed..

S&F modular switches 1 way 16A,1 module complete all as specified and directed..

S&F modular 6 A sockets-5 pin 2 module complete complete all as specified and directed..

S&F modular 6A/16A sockets-3/5 pin combine 2 module complete all as specified and directed..

S&F Modular white cover plate with frame 8 module complete all as specified and directed..

S&F Modular white cover plate with frame 6 module complete all as specified and directed..

S&F Modular white cover plate with frame 4 module complete all as specified and directed.

S&F Modular white cover plate with frame 3 module complete all as specified and directed.

S&F Modular white cover plate with frame 2 module complete all as specified and directed.

S&F modular bell push single pole one way 5/6Amp,240 volt,1 module, flush type complete all as specified and directed.

Supply and fix modular type blanking plates,1 module complete all as specified and directed.

Supply & fix modular fan regulator 120/100 W, 2 Module for ceiling fan and connecting complete all as specified and directed.

S&F in repair sheet metal enclosure for VTPN DB double door type, 4 way, suitable for 4 pole MCCB, 415Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCCB/ MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F in repair sheet metal enclosure for MCB DB double door type, triple pole and neutral 4 way 415Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F in repair sheet metal enclosure for MCB DB double door type, single pole and neutral 8 way 240 Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F in repair sheet metal enclosure for MCB DB double door type, single pole and neutral 4 way 240 Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F in repair MCB, single pole 6 to 32 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

S&F in repair MCB, single pole & neutral 32/63 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

S&F in repair MCB, triple pole & neutral 63 Amp, 415 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

S&F in repair MCCB 63-125 Amps 415 volts, 4 pole 16 KA breaking capacity complete all as specified and directed.

Supply and fixing in repair modular type AC box with socket plug top and MCBs with two pin and one pin for earth plug and socket complete with one single pole MCB 20 Amp complete all as specified.

S&F fan regulator electronic,step up socket type,230 volt,125 W and connection complete all as specified and directed.

S&F in replacement sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 4 sqmm nominal cross sectional area and one run of 4 sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including not less than 20mm dia 'medium grade' PVC concealed conduits (ISI marked) and fittings complete all as specified and directed. NOTE:- One unit length shall measured as two run of main wire and one run of conduit & earth wire.

Supply and Fixing in repair wall/surface mounting luminaires integrated LED Batten 20/22 W, warm yellow 3000/4000 K, 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge. Make Phillips Smart brite cat no BN 022C LED 22S 6500/4000K PSU CW GR / Havells Endura linear neo cat no enduralinear neo BS22WLED865SPCWH/ Bajaj

Supply and fixing in repair wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V ,100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrngements all as per specified and directed by Engr-in-charge.Make:Phillips smart brite BN 021 LED 12S 6500 PSU GR / Havells cat no LUMILINE+BS10WLED865SPCSS/ Orient Taskline AI LBLN-12-C-AL

Supply and fixing in repair FTL fittings with decorative LED batten made up of aluminium casting 18/20 W of size complete standard fittings and fixtures including fixing on walls/roofs/ through MS downrod suspended type with fitting arrangement including neccessary elect connection from ceiling rose to luminaries with suitable size PVC cord complete all as directed. Make: HAVELLS with cat Part No. REGALBATTEN8UPTO1X22WDSBSWH/ Philips/Bajaj with cat part No BLRB-DB 118/Orient LED Batten LIBT-118-DS

Supply and fixing in repair FTL with ultra bright crystal LED tubelight, 18 W ,6000 K with high efficency, with neccessary electrical connection incl disconnection old elecronic ballast if any complete all as directed. Make: HAVELLS with cat Part No. CRYSTAL1213T8DSTL20WLED865SGLASS, Phillips LED Glass tube cat no Essential LED tube 1200mm 20W 865 T8 IND/Orient Glassline with cat part No LTGL-018-C

S&F in repair super bright LED (2X2), 36 W, 6000 K recess mounting with high efficent LED source all as per specified and directed.Make ECOLINK cat part no.: RC340B LED36S -6500 L60W60 PSU OD ELP/Havells Cat No VENUS NEO 2X 2 36WLED 857/ Bajaj SKYLUX GZI SERIES-RECESSED cat No BZRSQL 36W GZi WH

S&F in repair LED Building security light 24/25 Watt with high power LED source (>110lumen/watt) PDC housing, IP65 and IK 07 with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories , as specified and directed by Engr-in-charge. Make philips smart bright cat no BRP042P LED 25 CW SLE S1 PSU GR P4210 / Bajaj Edge nxt cat part No ENXT P 24L WH CR PC SD/Havells Endura Sundown with cat part No ENDURASUNDOWNSL25WLED765PASYBOPCIHD

S & F in repairs integrated LED type Post top lantern with high power 25/30 W LED as light source, energy saving, environmental friendly, long life asethetically designed with symmetrical light distribution,spun auminium landscape lumainaire incl LED driver complete and incl neceesary electrical connection all as directed Make: Havells / Bajaj ARIAN cat part No BGCTN 25W LED WW/Halonix with cat part No HLPT-01-30-CW

S&F in repairs of surface type round LED 12W downlighter all as per specified and directed. Make: Havells Integra neo (surface) cat part no: IntegraneosurfaceDLS15WLED840S/ Phillips sleek surface SM250 & SM251 (Circular)/ Bajaj

S&F LED 7/9 Watt Lamp 6500/3000K, pin/thread type (B22/E27) as required complete all as specified and as directed

S&F in repair 30 W flood light LED fitting Warm/day cool as required, IP 65 protection with high power LED complete with including provn of flexible three core cable from ceiling rose to fitting terminal for making electrical connection, fixing the fitting on wall including all necessary fixing accessories with nuts and bolt complete all as specified and as directed . Make: HAVELLS cat Part No. JETAQUANTOFLS30WLED765SYMPCGRY/ Phillips Essential Smartbright Flood BVP161 LED30 CW PC WB/Bajaj Amaze LE BJFL 30W LED

S&F in repairs of surface type round LED 12W downlighter all as per specified and directed. Make: Havells cat part no: EDGESURFACERDDLR12WLWED857S/ Phillips sleek surface SM260 & SM261 (square)/ Bajaj Rimless LED cat No. BPSLRSURFACE 15W WH RD SD

S&F in repairs of recess type square LED 12W downlighter 6500/4000K all as per specified and directed. Make: Havells cat No. EDGEPRONEOSQDLR12W LED 857S / Phillips green LED ultima square DN096B LED6S-6500/4000 PSU WH/ Bajaj BPSLR 12W WH/WW SQ

S & F in replacement of electronic dirver of 2x2 recess mounting LED light fitting suitable for any make including taking down and refixing of light fitting complete all as specified and as directed

Supply and fixing in repair heavy duty metal body exhaust fan single phase 230/240 volt of size 380 mm sweep including holes of suitable size grouting of nuts and bolt etc and making good to match existing surface including louvers and making connection with twisted copper flexible wire 23/0.076mm, including disconnecting and taking down old unserviceable exhaust fan and deposited in AGE E/M (W) store yard for BER action complete all specified and directed

Supply and fixing in repair of heavy duty metal body exhaust fan single phase 230/240 volt of size 300 mm sweep including holes of suitable size grouting of nuts and bolt etc and making good to match existing surface including louvers and making connection with twisted copper flexible wire 23/0.076mm, including disconnecting and taking down old unserviceable exhaust fan and deposited in AGE E/M (W) store yard for BER action complete all specified and directed

Supply and fixing in repair exhaust/fresh air fans 200/225 mm sweep (white) plastic body with louvers including provn of flexible three core cable from ceiling rose to terminal for making connection, fitting on wall including all necessary fixing accessories complete all as specified and as directed . Make: Havells/Anchor/Bajaj

Opening/ taking down electrical board/ fittings/ fixtures excluding light fittings to identify complaint pertains to internal electrification of any type and nature in office bldgs and rectifying the same like of faulty electric circuits, tightening of loose wiring/ conduits, replacement of defective switch, socket, bell push, lamp holder, fan regulator, copper wire of different sizes, LED bulb, replacement of broken hylam boards, call bell, ceiling fan/ exhaust fan, condensor etc complete all as specified and directed. NOTES: (i) Cost of minor stores such as screws, clamps, insulation tapes, nuts/bolts etc shall be deemed included in the above quoted item. (ii) Spares such as switch, socket, bell push, lamp holder, fan regulator, copper wire, LED bulb, hylem sheet, call bell, fan condensor shall be paid seperately under respective items as supply only.

Supply only Switch piano, flush type, single pole, one way 5/6 Amp 230 Volts complete all as specified and directed.

Supply only Switch piano, flush type, single pole, one way 15/16 Amp 230 Volts complete all as specified and directed.

Supply only socket outlet, flush type, single pole, multipurpose 2 in1, 5 pin 5/6 Amp, 230 volts complete all as specified and directed.

Supply only socket outlet, flush type, single pole, multipurpose 2in1, 5 pin 15/16 Amp, 230 volts complete all as specified and directed.

Supply only bell push, flush type, single pole, one way 5/6 Amp, 230 volt flush type complete all as specified and directed.

Supply only angle type lamp holder PVC/ Polycarbonate type with back plate complete all as specified and directed.

Supply only fan regulator, electronic, step type, 230 volts suitable for 1200/1400 mm sweep ceiling fan including necessary connection complete all as specified and directed.

Supply only call bell AC single pole 240 volt Musical Type complete all as specified and directed

Supply only 1100 volts grade 1.50 Sqmm single core multistandard PVC insulated unsheathed copper cable (90m bundle pack) complete all as specified and directed.

Supply only 1100 volts grade 2.50 Sqmm single core multistandard PVC insulated unsheathed copper cable (90m bundle pack) complete all as specified and directed.

Supply only 1100 volts grade 4.0 Sqmm single core multistandard PVC insulated unsheathed copper cable (90m bundle pack) complete all as specified and directed.

Supply only twisted twin core flexible wire of size 23/0.0076 complete all as specified and as directed.

Taking down ceiling fan of any sweep, replace the unserviceable parts and refixing the same after necessary repair with provn of new twin core twisted PVC insulated multistranded flexible copper conductor cable of size 23/0.0076 from ceiling rose to fan complete all as specified and directed. NOTE: (i) Rewinding of fan shall be measured and paid separately under respective item. (ii) The rates shall be deemed to be inclusive for replacement of unserviceable parts bearings, capacitors, bushes etc. (iii) New parts like bearing, capacitors, bushes etc shall be paid as supply only.

All as per item No 84 above but exhaust fan of 230/300mm sweep including and provn of replacement of nut, bolts and washer complete all as specified and directed.

M&L for cutting & removing the burnt winding of ceiling fan of 1200/1400mm sweep, cleaning the slot properly, rewinding with super enamelled copper wire of suitable size, varnishing, heating and insulating and re-assembling the spares complete all as specified and directed.

All as per item No. 86 above but for exhaust fan 300mm sweep complete all as specified and directed

M&L for preparation of old painted surfaces of ceiling fan of any sweep and applying two coats of synthetic enamel paint by using spray gun including taking down and refixing in same location complete all as specified and directed.

M&L for preparation of old painted surfaces of exhaust fan of 300/450mm sweep and applying two coats of synthetic enamel paint by using spray gun including taking down and refixing in same location complete all as specified and directed.

Supply only bearing No.6201/6202 for ceiling /Exhaust fan complete all as specified and directed.

Supply only bearing No.6203/6204 for ceiling/ Exhaust fan complete all as specified and directed.

Supply only fan condensor 2.5 mfd complete all as specified and directed.

Supply only fan condensor 3.15 mfd complete all as specified and directed.

Supply only gun metal bush of any size complete all as specified and directed.

M&L provn of mounting clamp assembly complete for ceiling fan 1200mm/ 1400mm sweep with clamp, bolt, nut, washers, safety/split pins and rubber bush etc complete all as specified and directed.

M & L of Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanized earth lead wire 4.0 mm dia by means of nut, bolts, check nut & washer of galvanized iron or of steel, earth lead protected by 15 mm dia GI pipe light grade, watering pipe 20 mm dia GI light grade, GI wire mesh, GI funnel, alternate layer of char coal and salt, PCC chamber, recessed for and including RCC cover including all necessary excavation & earth work, earth 7.5 mtr wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate No 3 of MES SSR Part-I 2009 complete all as specified and directed .

S & F in replacement of ceiling fan 1400 mm sweep, BEE star rated (40-48 Watt), Min air delivery 215 CFM, copper wound motor, AC single phase, 230/240 volt, white colour complete with blades, down rod 300mm long, canopy and provn of connection with 3 core flexible copper cable of size 1.5 sqmm from ceiling rose to fan complete all as specified and directed.

Supply only 3mm thick plastic laminated bakelite sheet top cover of size 10"x12" including cutting for fixing of switch, socket etc. complete all as specified and directed.

Supply only 3mm thick plastic laminated bakelite sheet top cover of size 8"x10" including cutting for fixing of switch, socket etc. complete all as specified and directed.

Supply only 3mm thick plastic laminated bakelite sheet top cover of size 8"x5" including cutting for fixing of switch, socket etc. complete all as specified and directed.

suniltraders

M/S BABA CONSTRUCTION

M/s Chandra Mohan and Sons

M/S SWATI CONSTRUCTION

M/S AMARJIT SINGH

A ONE ENGINEERING