Dismantling and removal of the existing structure, followed by the fabrication, supply and installation of cabin, meeting room, and sitting arrangement near control room of AVS 2nd floor, NRB, BARC (T)

Amount

Providing arranging in position and fixing L shaped Work Station consisting of Main table with side table of dimensions as mentioned below built in 20 mm thk. Marine plywood including side unit, pencil tray, pullout tray, footrest. All drawers to be in plywood with 20 mm in front & 12 mm thk. In rear & sides, bottom in 6mm thk. Plywood Internal surfaces to be laminate. Table tops, side table unit fronts and sides to be finished in 20 mm thick plywood as per drawings. The front modesty panel etc. shall be finished as per drawing & instructions of the EIC. All beadings, moldings & exposed woodwork to be in teak wood of PVC Edge bending Foot rest shall be made out of 20 mm plywood & shall be finished with approved shade and colour laminate. All TW molding and bottom of tables shall be finished in 3 coats of French polish. All the tables shall have keyboard drawers to accommodate keyboards & mouse wherever necessary as per drawing. Rate include of all hardware, sliding door casters, drawers with multilock as per technical specification mentioned in Tender Book fitted on drawer channels, s.s handles, etc. All exposed woodwork to be finished with 3 coats of melamine polish all internal surfaces finished with 0.8 mm thick laminate the exposed surfaces shall be finished with 1.5 mm thick Laminate approved shade & colour etc. complete as per drawings, specifications and directions of engineer in charge

Workstation having main table 2133.6mm×609.6mm×762mm(contains 3 drawer storage unit at main) and side table ( Side table contains of 2 shelves with front shutter and CPU place)

Providing and arranging in position, wood work in frames of doors, wall paneling, clear story openings and other frames, wrought framed and fixed in position of required size and shape including sawing, jointing, making rebates for shutters, making grooves as shown in the drawings, finishing the surfaces to the required finish all as per specifications and drawings including protective painting to the surface that will come in contact with walls, joining materials, labour etc. complete all as per specifications and as directed by the Engineer-in-charge.

Total 04 quantity having size 8*4 feet and 30 mm thick panelled door type of approved colors including the cost of 100 mm ISI marked heavy quality stainless steel butt hinges with necessary screws, and other items

Providing arranging in position and fixing, wooden partition and wall panelling with aluminium framing made up of two numbers of 12 mm Marine plywood on both side & shall be finished with 1.5 mm thick laminate of approved shade and colour, all beadings, mouldings & exposed woodwork to be in teak wood complete all as per specifications and as directed by the Engineer-in-charge.

Providing and fixing in position Cup board Unit of size mentioned in sub items, with sides, top, bottom shelves and shutters made out 25 mm plywood &6 mm thick teakwood leaping/PVC Edge bending with edge moldings of approved profile if any shall be provided in all exposed ply edge surfaces & be finished with polish. Hand wares such as heavy duty hinges, brass body locks with extra- large group key of approved quality, magnetic ball catchers, coats of melamine polish (If necessary) & all internal surfaces finished with 0.8 mm thick laminate the exposed surfaces shall be finished with 1.5 mm thick Laminate of approved shade and colour. etc. complete as per drawings, specifications and directions of engineer in charge. Note- mode of measurement- Font elevation area

Providing and fixing cup board shelves using 25 mm thick pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board in shelves including 18 mm x 20 mm teak wood beadings at all sides with necessary screws and fittings all as per drawings and specifications and as directed by Engineer-in-charge

Providing and fixing anodized aluminum work for doors, windows, and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. as per drawings and directions of Engineer-in-charge. Anodised Aluminium sections (Minimum anodizing thickness of 15 micron)

SKY MAX (BID ID -3248711)

POZITRON ENGINEERING SYSTEMS (BID ID -3249691)

ABHIDNYA CORPORATION (BID ID -3251813)