Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.9 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder found in order | |
| 2 | L2₹18.4 L+₹51,700 (2.88%)Rejected-AOC | L2 | Rejected-AOC Other than lowest bidder | |
| 3 | L3₹20.2 L+₹2.3 L (12.7%)Rejected-AOC | L3 | Rejected-AOC Other than lowest bidder |
Tender Value
Refer Docs
EMD Value
₹57,000
Closing Date
14 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 874 EWS C/O 56 APO
GE 874 EWS C/O 56 APO
CERTAIN MISC REPAIR INCLUDING CLEANING OF SEPTIC TANK AND SOAKAGE WELL AND REPAIR OF DRAIN IN AREA OF AGE BR-I UNDER STN HQ ZANGLI
2022_MES_552527_1
CA No. GE 874/EWS-48/2022-23
Open Tender
Civil Works
Item Rate
180 days
Kupwara
As per tender documents
7 documents required · 7 mandatory
₹500
GE 874 EWS
₹57,000
Yes
1 Dec 2022
16 Sept 2022
15 Oct 2022
16 Sept 2022
14 Oct 2022
30 Sept 2022
16 Sept 2022 - 23 Sept 2022
Amount
B/R Portion
Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work, complete all as specified and directed.
Excavating in trenhes, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/loose soil.
Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level).
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specially provided for (reinforcement cut as required to facilitate demolition).
Dismantling posts or struts (wood, steel or R.C.C.) embedded in concrete brick work, masonry, etc. any section including taking out embedded portion and making good distrubed ground complete, all as specified.
Dismantling fencing wire mesh, any type.
Brick work sub class 'B' bricks, straight or curved on plan exceeding 6 metre mean radius, built in cement, mortar 1:4, all as specified.
M&L for Walling of random rubble stone uncoursed, well bonded, bedded and solidly hearted, built in CM (1:4), complete all as specified and directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.
M&L Plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete, complete all as specified.
M&L cement concrete Type C2 1:3:6 (40mm graded aggregate) in surface channels and drains complete all as specified.
Providing pre cast cement concrete in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces.
S&F Mild Steel work as in Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts. posts and struts in fencing including cutting tops to shape as directed, drilling holes notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165.
Plain cement concrete (1:2:4) type B-1 using (20mm graded crushed stone aggregate) as in copings, plinth band, bed blocks and like slightly rounded or chamfered angles as directed including necessary form work, all as specified.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. on flat rough finished surface of concrete complete all as specified and directed.
Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, all as specified.
Mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
S&F Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails and straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire stapples or steel pins etc. as directed and all as specified. (Each line wire to be measured).
Preparation of new or previously untreated steel and iron surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamal paint over one coat of red oxide zinc chrome primer complete, all as specified.
Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete as specified and directed.
M&L Rendering 10mm thick on fair faces of brick work or concrete surface, in cement mortar 1:4 finished the surface even and smooth without using extra cement , complete, all as specified .
15 mm thick rendering cement plaster in cement mortar (1:4), on stone masonry surfecees and finished even and smooth without using extra cements complete, all as specified.
M&L for Raised pointing in CM 1:4 to random or polygonal rubble, uncoursed or brought upto courses complete all as specified and directed.
Prepartion of old wall surfaces and applying two coats of cement base paint over a coat of primer of chalk whiting , complete all as specified.
S&F in repair Door closer hydraulically regulated(Aluminium die cast body) designation No. 3.universal type , suitable for door shutters of 851 to 1000mm in width and of lweight between 61 to 80kg and fixed.
Boulder filling dry hand packed tightly as in vertical bunds with slopping face in the back side of Retaining wall all as specified and directed.
Providing and fixing in repair concertina coil fencing with punched tape concertina coil 600 mm dia 10m opanable length ( total length 90m) having 50 nos rounds per 6 m length, up to 3.0m height of wall with existing angle iron Y shaped placed 2.4m or 3.00m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tired with G.I. stapels and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of engineer in charge, with reinforced barbed wire tape (R.B.T)/spring core (2.5 mm thick) wire of high tensile strength of 165kg/sq.mm with tape (0.52 mm thick and weight 43.478 gm/metre (cost of M.S. angle, CC Blocks shall be paid separately) including taking down old UNSV concertina coil fencing complete all as specified.
Mild steel work as in Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and weilding angles, as necessay, gusset plates, riveting etc., n exc 10kg each brackets conforming to Fe. 290. Gde-E-165.
S&F in repair Floor door stopper ( over all length of cover plate 140mm) of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor.
PVC (SWR) pipes, single socketed, in any length, with rubber rings 110mm dia.
Cleaning of septic Tank of various capacity including chamber, outlet chember and removing out all waste solid material / sludge out of cantonment area in a closed container and burring in borrow pits and covering with fresh mud , writing the date of cleaning of septic tank with black and white paint of size 150x200mm and finally spraying unslaked lime, dry arround the septic tank and over the pit complete all as directed (Cost of earth work in the pit is deemed to be included in the unit rate quoted by the tenderar)all as directed by Engr-in-charge . (Qty of thick solid shall be measured for payment under this item).
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises All as specified and directed.
Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes all as specified and directed.
Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match All as specified and directed.
All as per Item above but in skirting/dados, complete all as specified.
Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match All as specified and directed.
M&L Rendering 10mm thick on fair faces of brick work or concrete surface, in cement mortar 1:4 complete all as specified and directed.
Glazed ceramic coloured tiles (300x200mm) /(350x250mm) /(450x350mm) x 7mm thick, as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and directed by Engr-In-Charge.
M/S SAJAA CONSTRUCTION COMAPNY
GH MOHD SHAH AND CO
Bidder Name
M/S RJ BUILDERS
M/S SAJAA CONSTRUCTION COMAPNY
GH MOHD SHAH AND CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .