Loading
Loading…
Loading…
Tender ID
Tender Value
₹5.0 Cr
EMD Value
₹6.3 L
Closing Date
15 Apr 2026, 11:00 pmClosed
Directorate of Municipal Administration
TA CIVIL
CONSTRUCTION OF CORPORATION OFFICERS/STAFF QUARTERS AT PJ EXTENSION DAVANAGERE
DMA/2025-26/BD/WORK_INDENT55450
DMA/2025-26/BD/WORK_INDENT55450
Open
Buildings
Two Tender Document System(Two Cover)
DMA City Corporation Davanagere
7 documents required · 7 mandatory
To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e, 2020-21, 2021-22, 2022-23,2023-24& 2024-253. Satisfactory completed, at least one similar works of value not less than Rs.211.58 Lakhs as prime contractor (Work Done certificate must include the E-procurement Indent number and should be issued by the officer not below the rank of Executive Engineer or Equivalent)
To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e, 2020-21, 2021-22, 2022-23,2023-24& 2024-25Executed in any one year the following minimum quantities of work 1.Earthwork/Embankment -2650.20 cum, 2.PCC/RCC - 950.40cum 3.SSM/Concrete blocks/BBM-1635.41Sqm 4.Steel-116 tonne etc (Work Done certificate must include the E-procurement Indent number and should be issued by the officer not below the rank of Executive Engineer or Equivalent)
The Tenderer Should Submit Valid Class II and above Registration Certificate Issued by PWD Department
Tenderer or his identified sub-contractor should posses consent letter and required valid class 2 electrical license for executing electrification work and also should have executed similar Building electrical work totaling to Rs. 29.28 lakhs in any 1 year during last five years
Availability by owning at least 50% of the required key and critical equipment for this work and the remaining 50% can be deployed on lease /hire basis for all works provided, the relevant documents (Applicants shall indicate the make, year of manufacture, capacity and working conditions of each of the equipments along with RC issued by R.T.O. / Sale deed/purchase invoice, hire/lease agreements) shall be furnished.1Excavator-2 (1 Own & 1 Lease),2Concrete mixer-2 (1 own & 1 hire)/Concrete Batch mix plant-1(1 own or 1 hire) , 3.Tippers-2 (1 own & 1 hire),4Water tanker-4 (2 own & 2hire) ,5..Plate vibrator-1 (Own or Lease)
To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e, 2020-21, 2021-22, 2022-23,2023-24and 2024-25 Achieved in at least two financial year a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.846.34 lakhs (Turn Over Certificate Should Certified by Chartered Accountant with valid UDIN Number and should submit profit and loss, Balance Sheet and IT Returns)
Liquid assets and or availability of Credit facilities of not less than Rs. 127.00 Lakhs (Unconditional Credit lines/ Letters of credit/ Certificates from Nationalized/Scheduled banks for meeting the fund requirement etc (Format as per Government Circular FD-CMM/16/2022(P-2) dated 22.08.2022)
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
₹5,000
₹6.3 L
15 Mar 2026
15 Mar 2026
17 Apr 2026
15 Apr 2026
2 Apr 2026
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat ...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...
Applying priming coat: With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood including preparing the surface after thorougly cleaning oil, grease, dirt and f...
Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel wo...
Providing & fixing of 3-track 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum (Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and...
Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...
Fixing of window frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 m...
Providing Red Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and si...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand ...
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat ...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...
Applying priming coat: With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood including preparing the surface after thorougly cleaning oil, grease, dirt and f...
Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel wo...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Providing & fixing of louvered ventilator made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead f...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...
Fixing of door frame in an existing opening including embedding frame infloor and walls after cutting masonry for holdfasts for embedding holdfastin cement concrete 1:3:6 of 20mm and down size granite...
Fixing of window frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensio...
Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. completeetc. complete125x64x1.90mm( PWD SR 2023-24/ Vol -2 Sl No- 12.74.1 /P.No.107).
Providing and fixing SS Handles 200mm handles with screws etc. complete:Brass handles 125 mm with plate 175x32 mm (PWD SR 2023-24/ Vol -2 Sl No- 22.15.1/P.No.218).
Providing and fixing SS Tower Bolts 200x10mm with necessary screws etc. complete :200x10mm(PWD SR 2023-24/ Vol -2 Sl No- 22.15.6/P.No.219).
Providing and fixing SS Aldrop 16mm dia, 300mm with necessary screws etc complete.Bright finished brass latch(PWD SR 2023-24/ Vol -2 Sl No- 22.15.4/P.No.219).
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/ Chajjas/ Sunken portion of WC:Bathroom, cold applie...
Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, cur...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and fixing chromium plated brass 100 mm mortice latch and lock
with 6 levers and a pair of lever handles of approved quality with necessary
screws etc. complete.( PWD SR 2023-24/ Vol -1 Sl...
Providing and fixing Toughened glass 12 mm thickness with hole of approved quality with necessary screws etc. complete.( PWD SR 2023-24/ Vol -1 Sl No- 971/P.No.A 41).
Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for ...
Finishing walls with textured exterior paint of required shade :Old work (Two coats on existing cement paint surface applied @ 3.28 l/10 m² including preparing the surface after thoroughly cleaning t...
Finishing walls with textured exterior paint of required shade :Old work (Two coats on existing cement paint surface applied @ 3.28 l/10 m² including preparing the surface after thoroughly cleaning t...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 m...
Providing Red Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and si...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand ...
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat ...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...
Applying priming coat: With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood including preparing the surface after thorougly cleaning oil, grease, dirt and f...
Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel wo...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...
Fixing of door frame in an existing opening including embedding frame infloor and walls after cutting masonry for holdfasts for embedding holdfastin cement concrete 1:3:6 of 20mm and down size granite...
Fixing of window frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensio...
Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. completeetc. complete125x64x1.90mm( PWD SR 2023-24/ Vol -2 Sl No- 12.74.1 /P.No.107).
Providing and fixing SS Handles 200mm handles with screws etc. complete:Brass handles 125 mm with plate 175x32 mm (PWD SR 2023-24/ Vol -2 Sl No- 22.15.1/P.No.218).
Providing and fixing SS Tower Bolts 200x10mm with necessary screws etc. complete :200x10mm(PWD SR 2023-24/ Vol -2 Sl No- 22.15.6/P.No.219).
Providing and fixing SS Aldrop 16mm dia, 300mm with necessary screws etc complete.Bright finished brass latch(PWD SR 2023-24/ Vol -2 Sl No- 22.15.4/P.No.219).
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/ Chajjas/ Sunken portion of WC:Bathroom, cold applie...
Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, cur...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and fixing chromium plated brass 100 mm mortice latch and lock
with 6 levers and a pair of lever handles of approved quality with necessary
screws etc. complete.( PWD SR 2023-24/ Vol -1 Sl...
Providing and fixing Toughened glass 12 mm thickness with hole of approved quality with necessary screws etc. complete.( PWD SR 2023-24/ Vol -1 Sl No- 971/P.No.A 41).
Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for ...
Finishing walls with textured exterior paint of required shade :Old work (Two coats on existing cement paint surface applied @ 3.28 l/10 m² including preparing the surface after thoroughly cleaning t...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...
Providing Red Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and si...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat ...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...
Applying priming coat: With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood including preparing the surface after thorougly cleaning oil, grease, dirt and f...
Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel wo...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Fixing of door frame in an existing opening including embedding frame infloor and walls after cutting masonry for holdfasts for embedding holdfastin cement concrete 1:3:6 of 20mm and down size granite...
Fixing of window frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra...
Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. completeetc. complete125x64x1.90mm( PWD SR 2023-24/ Vol -2 Sl No- 12.74.1 /P.No.107).
Providing and fixing SS Handles 200mm handles with screws etc. complete:Brass handles 125 mm with plate 175x32 mm (PWD SR 2023-24/ Vol -2 Sl No- 22.15.1/P.No.218).
Providing and fixing SS Tower Bolts 200x10mm with necessary screws etc. complete :200x10mm(PWD SR 2023-24/ Vol -2 Sl No- 22.15.6/P.No.219).
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/ Chajjas/ Sunken portion of WC:Bathroom, cold applie...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and fixing chromium plated brass 100 mm mortice latch and lock
with 6 levers and a pair of lever handles of approved quality with necessary
screws etc. complete.( PWD SR 2023-24/ Vol -1 Sl...
Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for ...
WATER SUPPLY & SANITARY
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing Size Stone masonry with hard stone in foundation & plinth with
Cement mortar 1:6 (1 cement : 6 coarse sand)( PWD SR 2023-24/ Vol -2 Sl No- 5.4 /P.No.9).
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...
Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments. 3 HP, size 50x40 Head 30M, Discharge 198 LPM (BWSS...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...
Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings inc...
Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings inc...
Providing and placing on terrace (at all floor levels)polyethylene water storage tanks IS:12701 marked with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, ...
Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direct...
Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direct...
Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direct...
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal ...
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 g ( PWD SR 2023-24/ Vol -2 Sl No- 13.14/P.No.119).
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.( PWD SR 2023-24/ Vol -2 Sl No- 13.15/P.No.119).
Providing and fixing white vitreous china extended wall mounting water
closet of size 780x370x690 mm of approved shape including providing
& fixing white vitreous china cistern with dual flush fitti...
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass
single hole basin mixer of approved quality and make, including painting
of fittings and brackets, cutting and making good the ...
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms ( PWD SR 2023...
Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour 15 mm nominal bore with 45 cm length ( PWD SR 2023-24/ Vol -2 Sl No- 13.27.2 /P...
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular ...
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with t...
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end)50 mm nominal bore (PWD SR 2023-24Vol 2 P.No 117, I.no- 13.4.4 )
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end)40 mm nominal bore (PWD SR 2023-24 Vol 2 P.No 117, I.no- 13.4.3 )
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all
fitting arrangements & all necessary accessories complete. (PWD SR 2023-24 Vol 2 P.No 127, I.no- 13.59 )
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making go...
Providing and fixing Single Lever Basin Mixer with high neck with 265mm Extended body & 450mm long flexible connectors made of Stainless steel with all concealed fitting arrangements & all necessary a...
Providing and fixing Pillar Cock made of Stainless steel with all concealed
fitting arrangements & all necessary accesories complete - Class(PWD SR 2023-24 Vol 2 P.No 138, I.no- 14.48 a )
Providing and fixing Single lever wall mixer with L shaped Tubular bend
set for overhead shower made of Stainless steel with all concealed fitting
arrangements & all necessary accesories complete - ...
Providing and fixing Overhead rain showers of minimum dimension
225x225mm & wall flange made of Stainless steel with all concealed fitting
arrangements & all necessary accesories complete - Class (P...
Providing and fixing Flush valve soft touch made of Stainless steel with all
concealed fitting arrangements & all necessary accesories complete - Class (PWD SR 2023-24 Vol 2 P.No 145, I.no- 14.94 a )
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nomin...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...
Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensi...
Providing and laying at site of work MS casing caps as per IS 1239 (part II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum)...
Supplying, laying and jointing HDPE pipes of specified grade and
conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and...
Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per ne...
Supplying heavy gauge PVC conduit pipe……mm dia thick confirming to IS 2509 with suitable size bends, metal/ PVC junction boxes, adhesive paste etc., and running before concreating the slab . The c...
Supplying heavy gauge PVC conduit pipe……mm dia thick confirming to IS 2509 with suitable size bends, metal/ PVC junction boxes, adhesive paste etc., and running before concreating the slab . The c...
Supplying 2 mm thick heavy gauge PVC conduit pipe with
bends metal junction boxes adhesives paste etc and bracing U
or J hooks and cement plastering upto the surface of the trick
level and run with 18...
Supplying 2 mm thick heavy gauge PVC conduit pipe with
bends metal junction boxes adhesives paste etc and bracing U
or J hooks and cement plastering upto the surface of the trick
level and run with 18...
Supplying and fixing PVC/metal conduit deep junction box .25mm deep junction box
Supplying and wiring adopting loop system in existing PVC
Conduit/casing caping using COPPER conductor flexible
multistrand FRLS PVC insulated, 2X1.5Sqmm and
1X1.0Sqmm earth wire cable confirming to I...
Supplying and wiring adopting loop system in existing PVC
Conduit/casing caping using COPPER conductor flexible
multistrand FRLS PVC insulated, 2X1.5Sqmm and
1X1.0Sqmm earth wire cable confirming to I...
Supplying and wiring adopting loop system in existing PVC
Conduit/casing caping using COPPER conductor flexible
multistrand FRLS PVC insulated, 2X1.5Sqmm and
1X1.0Sqmm earth wire cable confirming to I...
Wiring for lighting/power circuit using one of FRLS PVC
insulated 1100V Grade, multistrand Copper with low
conductor resistance single core wire in open or concealed
system of wiring as per IS-694:199...
Wiring for lighting/power circuit using one of FRLS PVC
insulated 1100V Grade, multistrand Copper with low
conductor resistance single core wire in open or concealed
system of wiring as per IS-694:199...
Wiring for lighting/power circuit using one of FRLS PVC
insulated 1100V Grade, multistrand Copper with low
conductor resistance single core wire in open or concealed
system of wiring as per IS-694:199...
Wiring for lighting/power circuit using one of FRLS PVC
insulated 1100V Grade, multistrand Copper with low
conductor resistance single core wire in open or concealed
system of wiring as per IS-694:1.6...
Wiring for lighting/power circuit using one of FRLS PVC
insulated 1100V Grade, multistrand Copper with low
conductor resistance single core wire in open or concealed
system of wiring as per IS-694:199...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modulars witch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.1...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modulars witch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.3...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modulars witch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.4...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modulars witch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. ...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modulars witch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.8...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modulars witch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.1...
Supplying and fixing superior quality modular switch
mounting polycarbonate plate with necessary supporting
back plate with required nos. of machine screws, bolts nuts
etc.,complete on the existing me...
Supplying and fixing superior quality modular switch
mounting polycarbonate plate with necessary supporting
back plate with required nos. of machine screws, bolts nuts
etc.,complete on the existing me...
Supplying and fixing superior quality modular switch
mounting polycarbonate plate with necessary supporting
back plate with required nos. of machine screws, bolts nuts
etc.,complete on the existing me...
Supplying and fixing superior quality modular switch
mounting polycarbonate plate with necessary supporting
back plate with required nos. of machine screws, bolts nuts
etc.,complete on the existing me...
Supplying and fixing superior quality modular switch
mounting polycarbonate plate with necessary supporting
back plate with required nos. of machine screws, bolts nuts
etc.,complete on the existing me...
Supplying and fixing superior quality modular switch
mounting polycarbonate plate with necessary supporting
back plate with required nos. of machine screws, bolts nuts
etc.,complete on the existing me...
Supplying and fixing of modular switch/Socket/stepped
electronic fan regulator/dimmer/telephone socket etc on
existing modular switch plate as per IS 3854 and IS 1293.6 Amps one way swich
Supplying and fixing of modular switch/Socket/stepped
electronic fan regulator/dimmer/telephone socket etc on
existing modular switch plate as per IS 3854 and IS 1293.6Amps 2 way switch
Supplying and fixing of modular switch/Socket/stepped
electronic fan regulator/dimmer/telephone socket etc on
existing modular switch plate as per IS 3854 and IS 1293.6 Amps one way socket
Supplying and fixing of modular switch/Socket/stepped
electronic fan regulator/dimmer/telephone socket etc on
existing modular switch plate as per IS 3854 and IS 1293. stepped fan regulator
Supplying and fixing of modular switch/Socket/stepped
electronic fan regulator/dimmer/telephone socket etc on
existing modular switch plate as per IS 3854 and IS 1293.16 Amps one way switch
Supplying and fixing of modular switch/Socket/stepped
electronic fan regulator/dimmer/telephone socket etc on
existing modular switch plate as per IS 3854 and IS 1293. 32 Amps switch for AC & Gyser
Supplying and fixing of modular switch/Socket/stepped
electronic fan regulator/dimmer/telephone socket etc on
existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket
Supplying and fixing regular MCB distribution boards onwall/woodboard/flushmountingusing required clamps,bolts,nutsetc.,with provision for fixing suitable type capacity MCB's single phase/3phase/singl...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve,indicatorON/OFF,energycross-3with Short circuit breaking capacity ...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve,indicatorON/OFF,energycross-3with Short circuit breaking capacity ...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve,indicatorON/OFF,energycross-3with Short circuit breaking capacity ...
Supplying,fixingandwiringResidualcurrentcircuitbreaker(RCCB)240/450V upto 300mA sensitivity on existing wood/ panel board.32-40A 4 pole
Supplying, erecting, testing & commissioning of ON-LINEUPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer allaccessoriescompleteandExcludingbatteries and wiring co...
Supply, Erection, testing and commissioningof AMFpanel suitable for .kVADGset. Thepanel is of cubical type base/floormounting controlpanelwithhingeddoors,undrilledbottomglandplate,aluminium BusBarwith...
Supplying exhaust fan of 1440 RPM of 300mm (12") size with
bracket blades complete for light duty suitable for operate
230V 50Hz, AC supply.
Supplying capacitor type ceiling fan complete with down rod
blades, shackle, canopies etc., for operation on 230 volts,
50cycles. Single phase AC supply conforming to ISS-374-1979
and with double ball...
Fixing a ceiling/wall mounting fan of all capacities and all
types to the existing 'S' hook with fan regulator to the existing
board together supplying and fixing a 5 amps ceiling rose,
necessary leng...
LEDtube.W with high quality diffuser with Life of 25000 burning hours & 70%lumen maintenance with CRI80. PowerInput:220-240V@50/60Hz & Power factor 0.9 along with CE approved. 2years Warranty against ...
LEDtube.W with high quality diffuser with Life of 25000 burning hours & 70%lumen maintenance with CRI80. PowerInput:220-240V@50/60Hz & Power factor 0.9 along with CE approved. 2years Warranty against ...
Fixing all types and all capacities fluorescent /false
ceiling/spot light/CFL/LED fittings indoor on the wall /
ceiling / rafters / girders using 23 / 0.00076 " twin twisted
PVC insulated wires, requi...
Main Distribution Panel with One number of Incomer and and 21 Nos of Outgoing for Power Distribution Board in each House l . And One outgoing feeder to UPS Input
UPS Power Distribution Panel with One number of Incomer and and 21 Nos of Outgoing for UPS Distribution Panel to each house of the Floor.
Supplying fixing and wiringearthelectrodeforgroundingoflifts,transformers,DGsetsetc.using40mmdia2.9mmthick2.5mlongGIpipewithGIfunnelwithmeshandsuitablesizereducerfixedonthetopoftheearthelectrode.Thefu...
40 x 6 mm GI strip
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
kw-4-55450.docx
Tender Document • 1.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .