Day to day Civil maintenance works of buildings at CGMT Compound Hazratganj, Door Sanchar Sadan La-place, and Bhopal House Lalbagh Lucknow (for one year).

Amount

DSR 2023 ITEMS

Distempering with 1st quality acrylic distemper(ready mixed), having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.

Old work one or more coats .

White washing with lime to give an even shade :

Old work (two or more coats) .

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

One or more coats on old work.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge.

With cement mortar 1:4 (1 cement : 4 fine sand).

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:

Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm).

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.

Orissa pattern W.C Pan of size 580x440 mm

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.

10 litre capacity - White

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.

Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

LMR ITEMS

Providing manual assistance for attending petty day-to-day maintenance services as & when required i/c all required T&P and scaffolding etc. (Note: Minimum time shall be reckoned as half day even if the time required for doing the job is less than half a day. ( T & P to be arrange by agency but Material required for maintenance shall be supplied to agency by department )

Skilled manual Assistance

Unskilled manual Assistance

Removing blockage of floor trap, WC trap, RW pipe and sanitary pipes etc.including cleaning of pipes/ traps and disposal of garbage found to the nearest sewage dump etc complete. (Note: Rate includes the cost of necessary T & P, bamboo, choke remover plunger, etc.)

Minor Repairing of aluminium / wooden door shutters (single or double leaf) without taking out the shutter including adjustment of clips & tightening of screws/ nuts etc in panelling, door closer/ floor spring and oiling wherever required for smooth functioning all complete.

Major Repairing of aluminium door shutters (single or double leaf) including taking out door shutter from position, repairing and tightening of all members including new aluminium cleats, pivots and screws wherever required and refixing in position all complete but excluding the cost of new floor spring or door closer required.

Arranging electric welding machine at site for repairing works etc. with necessary cables and other T&P including the cost of operator and electrodes but excluding the cost of necessary steel sections complete as per direction of Engineer-in-charge. (Note: One day work at one site shall be taken as one job.)

Supplying at site approved bond chemical (like Pidicrete URP etc.) to be used in repair works as per manufacturer's specifications

Supplying of fittings & fixtures as and when required for day to day maintenance work of approved quality and direction of Engineer-in-charge.

PTMT Short Body Bibcock 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. .

PTMT Pillar cock 15mm nominal bore.

PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms.

PTMT Grating 100mm dia.

CP brass Pillar cock 15mm nominal bore.

CP brass long body Bib cock 15mm nominal bore.

Flexible (coil shaped) PVC Waste Pipe 40 mm dia with length not less than 700 mm including PVC waste fittings.

Semi rigid PVC wast pipe for sink and wash basin 32mm dia with length not less than 700mm including PVC waste fittings.

Unplasticised PVC Connection pipe with brass union 45 cm long 15 mm nominal bore.

PVC Lid/ Cover (white) for Euoropean wc seat.

PTMT Waste Coupling for wash basin and sink 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms.

PVC Cistern internal fittings.

GI Pipe 15 mm nominal bore ( B- class )

GI Pipe 20 mm nominal bore ( B- class )

GI Union 15 mm nominal bore

GI Union 20 mm nominal bore

GI nipple 15mm dia 50mm long.

GI nipple 15mm dia 100mm long.

GI nipple 15mm dia 150mm long.

GI nipple 20mm dia 100mm long.

GI socket / elbow size 15mm dia.

GI Tee 15 dia nominal bore.

GI long screw 15 mm nominal bore.

SS water jet (flat type) for European seats with PVC lead

Anodised aluminium sliding door bolt size 250x16mm

Anodised aluminium tower bolt size 250x10mm

Anodised aluminium handle size 125mm

Aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws

Aluminium hanging floor door stopper ( Twin Type ), ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws

Oxidised M.S. casement stays (straight peg type) with 300 mm weighing not less than 200 gms. necessary screws

Rectangular shape 453x357 mm mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing

Brass bib-cock Spindle (L&K or eq.)

PTMT soap container

PTMT urinal spreader

PTMT swan neck one hole basin mixern 15 mm nominal bore

Supply of material of approved quality, as & when required for day-to-day works, as per direction of Engineer-in-charge.

Cement

Coarse Sand

A-4 size photocopy paper (75 gsm)

Refilling of Printer Cartege (HP Laserjet 1018)

Credit of unserviceable fittings and other materials recieved from dismantling:

Brass/CP Brass Bib Cock, Stop cock, Pillar Cock Gate Valve and other fittings etc.

Old (unserviceable) PVC flushing cistern of all sizes.