Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.8 LAccepted-Finance | L1 | Accepted-Finance L1 | |
| 2 | L2₹5.8 L+₹1,460.58 (0.25%)Rejected-Finance | L2 | Rejected-Finance L2 |
Tender Value
₹6 L
EMD Value
₹15,000
Closing Date
1 Jul 2025, 4:00 pmClosed
BDO
BDO,KADAYANALLUR
Repair and Renovation of Existing School Building at PU Primary School West Facing 3 Class Room Building RCC Roof Building in Anaikulam Village and Panchayat in Kadayanallur Panchayat Union SIUDS 2025-26
2025_RDTN_572020_1
BDOKNR/429/2024-A3
Open Tender
Civil Works
Item Rate
180 days
KADAYANALLUR
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹15,000
21 Jul 2025
21 Jun 2025
1 Jul 2025
21 Jun 2025
1 Jul 2025
21 Jun 2025
Amount
Repair and Renovation of Existing School Building at PU Primary School (West Facing 3 class Room Building - RCC Roof Building) in Anaikulam Village and Panchayat
Distempering two coats using best quality and approved colour of oil bound distemper over one coat of cement paint primer including all cost and conveyance of materials, labour charges etc., complete.
Exterior Emulsion painting two coats with best approved quality and colour emulsion paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.
Painting two coats over Old iron works using ready mixed enamel paint with approved colour including cost and conveyance and labour charges etc., complete.
Painting two coats with approved Black Oxide for Old Black Board over the cement platered surface including cost and conveyance of paint and labour charges etc., complete.
Brick work in cement mortar 1:5 mix using country bricks 83/4"x4 1/4"x2 3/4" and conveyance of all materials to site and all labour charges etc., complete.
Dismantling the existing one course of Pressed tile roof finish in cement mortar and cleaned away from the site including cost of all labour charges etc., complete.(Ref.:- PWD Schedule of Rates 2023-24, Annex III- Rates of works - Unique Code- W-0038 (Page-22))
Plastering with cement mortar 1:5 mix to 12mm thick including cost and conveyance of all materials to site and all labour charges etc., complete.
Finishing the top of roof with one course of PRESSED TILES of size 23 cm X 23 cm X 2 cm laid in cement mortar 1:3 (One cement and three sand) 12mm thick mixed with water proofing compound conforming to I.S. at 2% by weight.(25% old tiles)
Supplying & fixing with cuddapah slabs 20-30mm thick for cup board thick and pointed with cement mortar 1:3 -10 Sqm
Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC.unsheathed Cu. Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T. switch with painting of suitable Colourfor open PVC light point / fan point (For electronic regulator) (5 points per coil)
Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting.
Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x l00 x 113 mm TW switch box for 5 A 3 pin non inter locking Wall socket with 5A Flush type switch with painting of suitable colour with continuous earth wire connection of 14SWG TC wire for open PVC plug point.
Supply and fixing of 1200 mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp.
Providing Cup-board Shutter with frame using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on work.
Special design Art work with first quality Enamel paint over two coats of Plastic Emulsion painting with best approved quality and colour paint over one coat of wall putty and one coat of primer including cost and conveyance of all materials to work site and labour charges etc., complete. (BALA Painting)
GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}
MR.S.CHELLADURAI (BID ID -1387182)
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
finance_683457.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .