Andaman Nicobar

Active

Works

Civil Works - Others

Installation of Gym Flooring and Repair of Gym Building including Painting of Gymnasium, Netaji Stadium Sports Complex under SD-II, SVPSD, APWD, Sri Vijaya Puram

Chief Engineer Andaman Public Works Department (APWD)

Netaji Stadium, Sri Vijaya Puram | South Andamans, Andaman And Nicobar Islands

Amount: ₹34.9 LCloses: 9 Oct 20262d left

Timeline

Published3 Oct 2026
Closes9 Oct 2026
Bid Opening9 Oct 2026

Tender Value

₹34.9 L

EMD Value

₹69,812

Closing Date

9 Oct 2026, 3:00 pm2d left

Tender Inviting Organisation

Name

EE/SVPSD/APWD/SVP

Address

EE/SVPSD/APWD/SVP

Work Description

Installation of Gym Flooring and Repair of Gym Building including Painting of Gymnasium, Netaji Stadium Sports Complex under SD-II, SVPSD, APWD, Sri Vijaya Puram

Tender Information

Tender ID

2026_APWD_25007_1

Reference Number

NIT No.50/EE/SVPSD/2026-27.

Tender Type

Open Tender

Product Category

Civil Works - Others

Form of Contract

Percentage

Period of Work

180 days

Location

Netaji Stadium, Sri Vijaya Puram

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

8 documents required · 8 mandatory

Fee/PreQual/Technical

Required1. Earnest Money Deposit. (.pdf)

Required2. Certificate of Work Experience. (.pdf)

Required3. Affidavit as per clause 1.2.1 of CPWD 6shall be submitted on Indian Non Judicial Bond/Stamp paper (.pdf)

Required4. Certificate of Registration for GST (Good Service Tax). (.pdf)

Required5. 10(Ten)YearsFinancialAuditedstatementofaccountfromaCharteredAccountantasFormAat Page 40/42ofNIT (.pdf)

Required6. Bidding capacity Form C-3 as per page No.38/40 of NIT. (.pdf)

Required7. Undertaking as per page No. 39/41 of NIT. (.pdf)

Finance

RequiredBOQ-50 (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹69,812

Important Dates

Last Activity

3 Oct 2026

Published

3 Oct 2026

Bid Opening

9 Oct 2026

Download Starts

3 Oct 2026

Download Ends

9 Oct 2026

Submission Starts

3 Oct 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (81 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
1.1	1:3:6 (1 Cement : 3 coarse sand (zone-Ill) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)	2.12	cum	10,291.7	₹21,818.4
1.2	1:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources)	2	cum	9,610.7	₹19,221.4
2Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:
2.1	1:3:6 (1 cement : 3 coarse sand (zone-Ill) derived from natural sources: 6 graded stone aggregate 20 mm nominal size derived from natural sources)	4.14	cum	13,137	₹54,387.18
3Centering and shuttering including strutting, propping etc. and removal of form work for:
3.1	Foundations, footings, bases for columns	2.26	sqm	553.3	₹1,250.46
3.2	Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.	37.64	sqm	1,188.6	₹44,738.9
4	Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	52.32	sqm	1,042.1	₹54,522.67
5Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.68 MB

Work Item Documents

TD-NIT-NO-50-26-27.pdf

Tender Documents • 1.12 MB

BOQ_26460.xls

BOQ • 0.43 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
1.1	1:3:6 (1 Cement : 3 coarse sand (zone-Ill) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)	2.12	cum	10,291.7	₹21,818.4
1.2	1:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources)	2	cum	9,610.7	₹19,221.4
2Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:
2.1	1:3:6 (1 cement : 3 coarse sand (zone-Ill) derived from natural sources: 6 graded stone aggregate 20 mm nominal size derived from natural sources)	4.14	cum	13,137	₹54,387.18
3Centering and shuttering including strutting, propping etc. and removal of form work for:
3.1	Foundations, footings, bases for columns	2.26	sqm	553.3	₹1,250.46
3.2	Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.	37.64	sqm	1,188.6	₹44,738.9
4	Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	52.32	sqm	1,042.1	₹54,522.67
5Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1.1

1:3:6 (1 Cement : 3 coarse sand (zone-Ill) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

2.12

cum

10,291.7

₹21,818.4

1.2

1:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources)

cum

9,610.7

₹19,221.4

2Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:

2.1

1:3:6 (1 cement : 3 coarse sand (zone-Ill) derived from natural sources: 6 graded stone aggregate 20 mm nominal size derived from natural sources)

4.14

cum

13,137

₹54,387.18

3Centering and shuttering including strutting, propping etc. and removal of form work for:

3.1

Foundations, footings, bases for columns

2.26

sqm

553.3

₹1,250.46

3.2

Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.

37.64

sqm

1,188.6

₹44,738.9

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

52.32

sqm

1,042.1

₹54,522.67

5Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :