REPAIR MAINT TO ROOF JOINERY FLOOR PLUMBING SANITARY FITTINGS INCL MISC EM FITTINGS TO CERTAIN BLDGS UNDER GE I GOS

Amount

Taking down chowkhats with shutters ( without taking off shutters from the frames ) not exc. 1.5 Sqm each complete all as specified & directed.

Taking down chowkhats with shutters ( without taking off shutters from the frames ) exc. 1.5 Sqm but.not exc. 4 sqm each complete all as specified & directed.

Taking down shutters of any description not exc. 1 Sq.m each complete all as specified & directed.

Taking down shutters of any description exc. 1 Sq.m but not exc. 2 Sq.m each complete all as specified & directed.

S&F 2nd class Hard wood in plain, solid, straight chowkats and frames wrought framed, rebated on the solid, rounded or chamfered put together with glue pinned joints complete all as specified & directed.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified & directed.

M&L PCC 1:3:6 type C1 using 20mm graded stone aggregate for fixing of hold fast and making good complete all as specified & directed.

S&F Solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications and drawing complete all as specified & directed.

S&F for Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS Tubes for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement of stiles and plain colour PVC Sheets for top rails lock rail & bottom rail on eighter side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement , suppling & fixing in the frame at site complete all as specified & directed.

S & F 40 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides to match complete all as specified and directed.

S&F 30mm thick 2nd class hard wood Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.23(b) complete all as specified & directed.

S&F 35mm thick 2nd class hard wood plain framed panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces.The size of rail and stile as per IS:1003 (Part1),kiln seasoned and chemically pressure treated, complete all as specified & directed.

S&F 100mm size butt hinges extruded aluminium alloy with alloy with galvanised mild steel hinge pin, complete all as specified & directed.

S&F 75 mm size butt hinges medium weight (ISI Marked), extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type-C21 complete all as specified & directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type anodized complete all as specified & directed.

S&F 100mm size extruded aluminium alloy handles, fabricated type anodized complete all as specified & directed.

S&F in repair 150mm size extruded aluminium alloy handles, fabricated type anodized complete all as specified & directed.

S&F 150mm size Aluminium anodized barrel Tower bolts of extruded section and fixed complete all as specified & directed.

S&F 100mm size Aluminium anodized barrel Tower bolts of extruded section and fixed complete all as specified & directed.

S&F in repair 150mm size Aluminium anodized barrel Tower bolts of extruded section and fixed complete all as specified & directed.

S&F Aluminium alloy, anodized, sliding door bolt (ISI Marked) of 300mm with hasp & staple (Bolt type) and fixing clips of sheets, coat or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified & directed.

M&L preparation of new wooden surface exceeding 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified & directed.

S&F 2nd class hardwood Beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc., and removing old beads to Store complete all as specified & directed.

S&F aluminium alloy wire cloth, 0.45 mm nominal dia of wire and averaging width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified & directed.

S&F in repair aluminium alloy wire cloth, 0.45 mm nominal dia of wire and averaging width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified & directed.

S& F in repair double action floor spring Hydraulically regulated made up of Min 1.25 mm thick aluminium alloy sheet foundation Box Main Body with stainless steel cover governing Pivot made of brass, other parts made of mild heavy duty and fixed etc complete all as specified & directed. Make : SINDHU/SAMARAT or equivalent

S & F in repair Aluminium (extruded section) body Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg complete all as specified & directed.

S& F in repair Lock fixed to Aluminum doors complete all as specified & directed. (Make Godrej/Link).

Mild steel framed work as in grills, grating etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, conforming to Fe-410-0 or Fe-310-0.

M&L preparation of new steel surfaces of any description not exc 10 cm width or girth and priming with red oxide zinc chrome and painting with two coats of synthetic enamel paint complete all as specified & directed.

Hacking out old broken glass panes of any thickness, size ,quality or description from wooden frames, aluminium frame glazed with putty or fixed with beads in repairs complete all as specified & directed.

S&F glass pan ordinary quality 3mm thick and glazing with oil putty/ wooden beads in square n. exc 0.5 m each pane complete all as specified & directed.

S&F in repair vitreous china wash basin, white flat back size 580mmx450mm, excludings taps, waste, chain and plug and porcelain stopper but including brackets, complete all as specified & directed.

S&F in repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with internal footrest (excluding flushing cistern and flush pipe) complete all as specified & directed.

S&F in repair Vitreous china bowl type Urinal flat back ,size 465x355x265 with grating and Union for discharg pipe including all necessary items complete all as specified & directed.

S&F in repairs Vitreous china wash down water closed pan ( Pedestal) white (exc flushing cistern & Pipe ) incl connection to trap and flushing pipe complete all as specified & directed.

S&F in repair PVC low level flushing cistern (white) 10 Ltrs capacity with internal fitting, push button operated type with and including bracket, PVC flush pipe etc complete all as specified & directed.

S&F in repair Sink with draining board made out of stainless steel 1.00 mm thick sheet for kitchen with plugs, washers and wastes including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm with bowl size 410 mm x 330mm x 160mm complete all as specified & directed.

S&F 1 mm thick stainless steel plate rack of size 900x600x200mm including fixing with rawal plug and screws complete all as specified and directed Make: Blue Star cat No kpr - 313/ kpr- 314 or equivalent of nirali/ parryware.

S&F Tubular towel rail brass chromium plated 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls complete all as specified & directed.

S&F in repair Chromium plated brass shower rose 75 mm dia with swivel joints, complete all as specified & directed.

S&F in repair Angle valve 15 mm bore brass chromium plated with capstan head screwed for iron pipe,complete all as specified & directed.

S& F in repair CP Jt Spray / Health faucet with 1.5 mtr 15 mm bore PVC Tube and hook complete all as specified & directed. MAKE : JOHNSON/JAGUAR ESSCO CAT NO -547 or equivalent.

S & F in repair coloured EWC sheet cover complete all as specified & directed. Make: Parry ware cat part No C 8012 or equivalent of specified make.

S & F in repairs grating doom 125mm dia with waste hole of PTMT fixed on floor/nahani trap with cement mortar, (Minimum weight 40 gms) complete all as specified & directed.

S & F in repairs PVC waste pipe 32mm dia, 60 cm long for WHB with cup, complete all as specified & directed.

All as per Item No 46 above but 40mm dia for sink complete all as specified & directed.

S & F in repairs Stainless steel waste coupling for S.S Sink 75mm to 100mm dia set with rubber washer plug etc complete all as specified & directed.

S&F in repairs PVC connection 15 mm size, of length 450 mm, with PTMT nuts complete all as specified & directed.

Taking up or down steel water tubing and connections of following :- (a) 15 mm bore

(b) 20 mm bore

(c) 25 mm bore

Supply and laying CPVC pipes SDR 11 & Plain CPVC 11 fitting on walls/ceiling or laying in floor complete all as specified of following :- (a) 16 mm outer dia

(b) 20 mm outer dia

(c) 25 mm outer dia

All as per Item No.54 above but re-fixing old steel tubing of following :- (a) 15 mm bore

(b) 20 mm bore

(c) 25 mm bore

S&F CPVC Brass Elbow (a) 16 mm outer dia

(b) 20 mm outer dia

(c) 25 mm outer dia

S&F CPVC Brass Elbow (3/4 x1/2) 20 mm outer dia

S&F CPVC Brass Tee (a) 16 mm outer dia

(b) 20 mm outer dia

(c) 25 mm outer dia

S&F CPVC Male Brass Threaded Adaptor (MTA/MBTA) (a) 16 mm outer dia

(b) 20 mm outer dia

(c) 25 mm outer dia

S&F CPVC Female Brass Threaded Adaptor (FTA/FBTA) (a) 16 mm outer dia

(b) 20 mm outer dia

(c) 25 mm outer dia

S&F CPVC Tank adaptor 20 mm outer dia

S&F CPVC Union (a) 16 mm outer dia

(b) 20 mm outer dia

(c) 25 mm outer dia

S&F Lid (cover) of Rotational moulded polythelylene water storage tank capacity 500/1000 ltr complete all as specified and directed.

S&F in repair ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 15 mm bore (minimum weight 142 gms), complete all as specified and directed.

S&F in repair ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore (minimum weight 210 gms), complete all as specified and directed.

S&F in repairs gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 20 mm bore complete all as specified and directed.

S&F in repair 15 mm fancy type pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered ‘Hot’ or ‘cold’ with long screwed shanks and fly nuts complete all as specified and directed.

S&F in repair 15 mm fancy type stop valve cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron or union and fixed to 15 mm GI tube complete all as specified and directed .

S&F in repair 15mm bore bib tap cast copper alloy chromium plated with crutch or butterfly handle fixed to 15 mm dia GI tube complete all as specified and directed.

S&F in repair Wall mixer with provn for overhead shower with 115mm long bend pipe on upper side connecting legs,& wall falnges, complete all as specified and directed. Make : Jaquar Code No - CQT - 23273UPR or equivalent.

S&F in repair sheet glass shelf assembly consinsting of 5.5 mm thick sheet glass shelf 12 CM wide with CP bracket guard and railing 60 cm long complete all as specified and directed.

Demolition of Cement concerte (unreinforced) in ground floor and paving n exc 15 cm thick below or above ground level complete all as specified and directed.

M&L PCC 1:3:6 type C-2, 75 mm thick laid as in plinth protection/paving etc finished even & smooth with out usnig extra cement complete all as specified and directed.

M&L for 100 mm thick cement concrete 1:2:4 type B2 using 40 mm graded stone aggregate as in hard standing surface finished even and smooth with out using extra cement complete all as specified and directed.

M&L 25 mm thick PCC (1:2:4) type B-0, using (12.5 mm graded stone aggregate) finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified & directed.

M&L for glazed ceramic tiles in vertical surface 350x250x7mm/450 x350 x 7 mm thick coloured on vertical surfaces such as dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , including 15mm thick rendering in CM 1 :4 complete all as specified and directed.

M&L for Non Skid ceramic tiles 7 to 8 mm thick coloured (square/ rectagular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , including 15mm thick screed bed in CM 1 :4 complete all as specified and directed.

M&L Glazed ceramic tiles in vertical surface 300x200x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

M&L Vitrified Ceramic tiles 10 mm thick (square/ rectagular) dark/colour shade polished,area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floors over 20mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per item No. 94 above but on vertical surface of wall of size 600x100x10mm thick as in dado/skitting including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

M&L Chequerred cement concrete tiles of size 20 cm x 20 cm x 25 mm thick with grey cement and no pigmet machine pressed, set, jointed and pointed in neat cement slurry in floors over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L 75 mm thick Plain Cement concrete Type C-2, 1:3:6 using (40mm graded stone aggregate), as in sub-base of floors complete all as specified and directed.

M& L for Sand filling under floors or in foundations etc incl watering and consolidation, complete all as specified and directed.

M&L for machine pressed precast concrete inter locking paver block of any shape and size confirming to IS 15658-2006 of thickness 60mm, M-35 grade set and jointed with neat grey cement and pigment etc. complete all as specified and directed.

M&L for plain cement concrete type B-1 1:2:4 using (20mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamferred on edges, complete all as specified and directed.

M&L for hardcore of gauge n.exc. 63 mm, deposited, spread and levelled in layers n.exc. 15 cm thick, watered and rammed to a true surface using broken stones or boulders, complete all as specified and directed.

M&L 20 mm thick Makrana Colour/white Marble machine cut on kitchen platform, over cement screed base laid and joined with gray cement slurry mixed with pigment to match the shade including edge cutting , nosing , rubbing and polishing incl 20 mm thick screed bed in CM 1:4 complete all as specified and directed.

Demolition of brick work or stone / boulder masonry built in cement moter complete all as specified and directed.

M&L Brick work with fly ash old size bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering plaster 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surface of wall and finished even and smooth without using extra cement including taking down of plaster complete all as specified and directed.

M&L for rendering plaster 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surface of wall etc and finished even and smooth without using extra cement including taking down of plaster complete all as specified and directed.

M&L rendering 5 mm thick in cement and sand mortar 1:4 on concrete surfaces of ceiling including finishing the surface even and smooth without using extra cement complete all as specified and directed.

All as per Item No. 108 above , but on ceiling.

M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over 3 mm thick wall care putty complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of wall including removal of vegetation and applying two coat of cement based paint complete all as specified and directed.

Taking down existing water proofing membrane and cleaning roof, plastered surface etc preparing the surface to receive plaster by brushing with wire brush and fanning the surface to remove all loose dirt etc and brushing neat cement slurry @ 3.00 Kg/Sqm complete all as specified and directed.

Taking down cement or cement lime plaster of any description including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick plaster on surface as in roof with integral water proofing compound 3% by the weight of cement in cement mortar 1:4 complete all as specified & directed. Note :(Integral WPC will be measured and paid separately).

Supply only Integral waterproofing compound.

M&L for water proofing treatment to roof surface complete all as specified & directed with the followings :- (a) Apply bituminous based primer confirming to IS: 3384-1965 @ 0.30 kg/sqm (b) APP modified bituminous membrane 3mm thick with non woven polyester core of weight not less than 3.2 to 3.5 Kg/sqm laid and bonded to the sub strata by heat process, over laps of 100mm shall be sealed/fused by flame torch application as per manufacturer instructions. (c) Applying bituminous based aluminium paint @ 0.20 Kgs/Sqm in two coats over APP membrane.

Dismantling PVC water storage tanks exc 500 ltr but n. exc 1000 ltr capacity and removing to store complete all as specified and directed.

Dismantling PVC water storage tanks exc 1000 ltr but n. exc 2000 ltr capacity and removing to store complete all as specified and directed.

S&F 500 ltr capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I.

S&F 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I.

S&F in repair cast iron waste and vent pipe in any length with or without ear with cement joints, fixed to walls for 100mm dia, complete all as specified and directed.

All as per item No. 121 above but 75 mm bore

S&F in repair cast iron bend ( any radius) dimenshing pieces or tappers ( large bore measured) 100mm bore with oval access door complete all as specified and directed.

All as per item No.123 above but 75 mm bore

S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius

S&F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius

S&F PVC (SWR) bent cowl of 110 mm dia

S&F anodised aluminium glazed side hung double/single door shutters with anodised aluminium frame of section 100x44x 2.00mm and shutter having style, top rail, lock rail and bottom rail of 44.5X99X1.8mm including 5.5mm thick tinted sheet glass ordinary quality with all necessary suitable push & pull plate/handle, screw, jointing cleats, rubber packing, aluminium snap beading and 1 No 200mm long Aluminium tower bolt, 100 msm long 3 No Aluminium butt hinges B-21 type, and one No mortice brass lock 100mm size 4 leaver (vertical type) with double action floor spring hydraulically regulated made up of min 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty for each shutter complete all as specified and directed . (Make: Sindhu /Samrat or equivalent)

S&F aluminium anodised galzed sliding type three track window shutters made out from anodised aluminium frame of 'H' section size 34.00x43.5x2mm thick with 4mm tinted sheet galss (Weight not less than 0.57 kg/RM and shutter 'Z' of size 34.00x43.5x28.00mm having thickness 2.00mm (Wt not less than 0.50kg/RM) and all necessary jointing cleats , glazing, clips rubber packing, aluminium snap beading Tower bolt 100mm long 1 No and sliding hinges 180mm longs including aluminium grill with Mosquito proofing etc complete all as specified and directed.

S&F 25/32 mm dia decorative/drapery curtain rod with bub & Bracket & internal tunnels etc complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets etc complete all as specified and directed.

S&F 12mm thick plain Gypsum Board false ceiliing with GI frame work including all necessary drilling cutting to fix electric items complete all as specified and directed with following :- (a) GI Grid channel 30x25x20 mm of guage fixed with rawl plug and screw 450mm centre to centre alongwith perimeter walls. (b) GI Channel made to shape 50x40x40 mm of 24 guage placed @ 600mm centre to centre from perimeter at wall except long wall (in one span). (c) GI intermediate runners of size 45x10x10 mm of 24 guage fixed @ 1200mm centre to centre leaving frame of one side walls (in other span). (d) GI sheet 25mm wide and 20mm guage suspanded fixed with steel fastner to roof ceiling and 1200mm centre to centre including pluging of RCC slab. (e) 12mm thick gyplse board filling joints with POP and finishing complete with two coat of plastic emulsion paint over one coat of primer on ceiling.

M&L for prefabricated and prereinforced 75mm side POP moulded cornices/moulding fixed on ceiling/ wall complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness,including nainital or similar pattern roof coverings etc complete all as specified and directed.

S&F steel work in tubular poles & trusses (unframed) including purlins,rafters and special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS-1161-1979 grade St-240.

S&F for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws incl ridge etc complete all as specified and directed.

M&L for preparation of old treated surfaces of walls (plastered or unplastered surfaces) and applying one coat of white wash omplete all as specified and directed.

All as per Item No. 139 above but but on ceiling

M&L for preparation of old treated surfaces of walls (plastered or unplastered surfaces) and applying one coat of cement base paint complete all as specified and directed.

M&L complete removal of existing treatment on walls and applying two coats of oil bound distemper over 3 mm thick wall care putty to walls etc complete all as specified and directed.

M&L for preparaion of treated surfaces and applying finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) walls complete all as specified and directed.

M&L for preparation of old painted wooden/wood based surfaces over 10cm width of girth and applying one coat (finishing coat ) of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L preparation of old painted steel surfaces over 10 cm width of girth and applying one coat (finishing coat) of synthetic enamel paint over a red oxide complete all as specified and directed.

M&L for one coat of synthetic enamel paint to plastered or concrete surface incl preparartion of old surface as in small patches for bases for writing bldg numbers complete all as specified and directed.

M&L Writing letters with synthetic enamel paint not exceeding 30 cm high including preparation of base surface not exceeding 30 cm in diameter and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L 5 mm thick Rubber tiles with fabric backing or insert, plain coloured or marbled topping, matt or glossy, laid in floors with approved adhesive etc complete all as specified and directed.

Taking down carefully copper/aluminum point wiring (light, fan/exhaust fan, bell, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders, brackets, bell, bulk head fittings etc removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and also making good disturbed surfaces of wall, floors etc complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm copper conductor (Multi-stranded) PVC insulated and unsheating FRLS electric cable 1100 volts cable and including PVC casing and caping of suitable size (as per conductor run) with all fittings/ accessories and including PVC insulated electric cable 1100 volts 1.5 Sqmm ( multi-stranded) copper conductor single core( Green colour) cable as continuous earth wire connected to common earth dolly by providing lugs including sunk in pressed steel terminal boxes of 1.6 mm thick concealed in wall (duly painted with two coats of black bituminous paint over a coat of red oxide primer in and out sides) with and including cutting holes for switches, sockets, regulators etc as per requirement including fixing with machine screw, washer etc and making good disturbed surfaces of wall and matching colour as per existing complete all as specified and directed. One light point controlled by one, one way switch. Make of wire : Plaza/Polycab/Havells or equivalent

All as per Item No. 150 above but for one fan/exhaust fan/bell point point controlled by one, one way switch

All as per Item No. 150 above but for one 5 Amp socket point controlled by one way switch on independent board.

All as per Item No. 150 above but for one 5 Amp Socket point controlled by one way switch on the same board with other switches.

All as per Item No. 150 above , but for one socket outlet 15 Amps on independent board with 4 Sqmm copper conductor ( Multi-stranded) PVC insulated and unsheating electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 4 Sqmm copper stranded conductor as continuous earth wire connected to common earth dolly complete all as specified and directed. Make of wire : Plaza/Polycab/Havells or equivalent

M&L for socket outlet 2 in 1, 3 pin, 5A flush type complete all as specified and directed. Make : Indo Asian/ Plaza/ Havells/Anchor or equivalent

M&L for socket outlet 2 in 1, 3 pin, 5 Amp and 15 Amp flush type complete all as specified and directed. Make : Indo Asian/ Plaza/Havells/Anchor or equivalent

M&L for Switch piano flush button 5 Amps complete all as specified and directed. Make : Indo Asian/Plaza/Havells/Anchor or equivalent

M&L for Switch piano flush type single pole one way 15 Amp complete all as specified and directed. Make : Indo Asian/Plaza/ Havells/Anchor or equivalent

M&L for ceiling rose surface type, 65 mm x 50 mm two to three terminals/PVC/polycarbonate, isolated body fixed on PVC block complete all specified and directed. Make : Indo Asian/Plaza/Havells/Anchor or equivalent

S&F Ceiling Fan regulator electronic step type as per sample complete all as specified and directed. Make : Indo Asian/Plaza/Havells/Anchor or equivalent

M&L for wooden rectangular block of size suitable for DB 8 way/DB 4 way TPN, closed recessed 3mm thick plastic laminated sheet complete all as specified & directed.

S & F LED light fitting 1 x 40 Watt LED Aluminium batten complete with new generation LED T8 batten for multipurpose application made from extruded aluminium housing and polycarbonate diffuser complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size incl taking down the old USNV complete all as specified and directed. Make : Surya SLE BTN T8 40W Havells/Philips or equivalent

S & F LED light fitting 1 x 10 Watt T5 Alumnium batten type, indoor decorative PC housing extruded T5 Al LED battens with extruded aluminium housing and integrated LED driver complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size incl taking down the old USNV complete all as specified and directed Make : Surya Cat No SLE BT 10 or equivalent in Havells/Philips or equivalent

S&F LED lamp 9 Watt complete all as specified and directed. Make : C&S Cat No LTHPLEDLAMP9WB22 or equivalent in Surya/Havells.

S&F new generation energy saving LED Bulk Head Plus fitting in engineering plastic housing with clear prismatic diffuser complete all as specified and directed. Make : Surya Part No SLE BLH 10W PLUS or equivalent in Havells/Philips.

M&L for angular type lamp holder, PVC/ polycarbonate type with back plate suitable for 15/18 watts for batten fitting, including plastic square board of required size complete all as specified and directed. Make : Indo Asian/Plaza/Havells/Anchor or equivalent

Taking down and re-fixing, connecting existing electric meters, single/three phase complete all as specified and directed.

S & F bell push piano (Flush type) 5 Amp 240 Volts incl taking down the old unsv complete all as specified and directed. Make : Anchor/Cona/Havells or equivalent

S & F bell / buzzer electric single phase 240 volt incl taking down the old unsv complete all as specified and directed. Make : Anchor/Cona/Havells or equivalent

S & F MCB TPN 63 Amp 415 Volts incl taking down the old USNV complete all as specified and directed. Make : Polycab/Havells/ C&S or equivalent

S & F MCB TPN 40 Amp 415 Volts incl taking down the old USNV complete all as specified and directed. Make : Polycab/ Havells/C&S or equivalent

S&F Isolator DP 32A, 240 volts complete all as specified and directed. Make : Polycab/C&S or equivalent

S&F MCB SP upto 40 Amp, 240 volt complete all as specified and directed. Make : C&S/Polycab/Havells or equivalent

S&F Sheet metal enclosure for DB’s suitable for MCBs of triple pole and neutral 4 way double door type with 200 amp rated bus bar complete all as specified and directed. Make : C&S/Polycab/Havells or equivalent

S&F Sheet metal enclosure for DB’s suitable for MCBs of single pole and neutral 8 way (Double door) with 200 amp rated bus bar complete all as specified and directed. Make : C&S/Polycab/Havells or equivalent

S&F for sub main wiring two single core PVC insulated and unsheathed cable with 6 Sqmm multi-stranded copper conductor including in PVC casing caping with 4 Sqmm PVC copper conductor cable as in earth wire system, including taking out old wiring complete all as specified and directed. Make : Havells or equivalent in Polycab/Plaza or equivalent

S&F for sub main wiring two single core PVC insulated and unsheathed cable with 4 Sqmm multi-stranded copper conductor including in PVC casing caping/conduit as per site requirement with 2.5 Sqmm PVC copper conductor cable as in earth wire system ,including taking out old wiring complete all as specified and directed. Make : Havells or equivalent in Polycab/Plaza or equivalent

S&F modular cover plate with frame 1 module as per sample complete all as specified and directed.

S&F modular cover plate with frame 2 module as per sample complete all as specified and directed.

S&F modular cover plate with frame 3 module as per sample complete all as specified and directed.

S&F modular cover plate with frame 4 module as per sample complete all as specified and directed.

S&F modular cover plate with frame 6 module as per sample complete all as specified and directed.

S&F modular cover plate with frame 8 module complete all as specified and directed.

S&F modular switch single pole 1 way 6A, complete all as specified and directed. Make : Crabtree/CONA/Havells or equivalent

S&F modular socket outlet 6A 2/3 pin combined 2 module complete all as specified and directed. Make : Crabtree/CONA/Havells or equivalent

S&F modular switch 16A single pole one way complete all as specified and directed. Make : Crabtree/Cona/Havells or equivalent

S&F socket outlet 6A/16A- 2/3 pin combined 2 module complete all as specified and directed. Make : Crabtree/Cona/Havells or equivalent

M&L for modular Bell push Switch single pole one way 6A/10Amps complete all as specified and directed. Make : Crabtree/Cona/Havells or equivalent

M&L for call bell modular type AC 230 volt single pole complete all as specified and directed. Make : Crabtree/Cona/Havells or equivalent

M&L for fan step regulator, 120 W-2 module complete all as specified and directed. Make : Crabtree/Cona/Havells or equivalent

S&F ceiling LED down light 3W/6W round/square complete including taking down old unsv complete all as specified and directed. Make : Surya Cat No SLE DLR 3W XX Stellar RD or equivalent in Philips/Havells.

S&F ceiling LED down light 12 watt round/square complete including taking down old unsv complete all as specified and directed. Make : Surya Cat No SLE DLR 12W XX Stellar RD or equivalent in Philips/Havells.

S&F recess/ceiling ultra slim down lights 36 watt LED (600x600mm) size, ultra slim with extruded alumininium housing and milky diffuser complete including taking down old unsv complete all as specified and directed. Make : Surya Cat No SLE FP 36 R22 or equivalent in Surya/Havells.

S&F LED wall light sun/prismatic made up of unbreakable poly carbonate suitable for mounting on wall/surface with connected accessories with 12 watt LED lamp suitable with back plate, including plastic square board of required size complete all as specified and directed. Make : Surya Cat No SLE WL 12W-GP200 or equivalent in Havells/Philips.

S&F PVC insulated copper wire 1 Sqmm, three core including taking out old unsv wire complete all as specified and directed. Make : Havells or equivalent in Polycab/Plaza or equivalent

S&F PVC insulated copper wire 1.5 Sqmm, three core including taking out old unsv wire complete all as specified and directed. Make : Havells or equivalent in Polycab/Plaza or equivalent

S&F PVC flexible pipe of size 15mm or 20 mm all as per site reqmt for protection of wire complete all as specified and directed.

S&F Plastic enclosure without MCB SP & DP as required in site with fixing on wall/pole etc with binding/fixing material complete all as specified and directed. Make : C&S/Havells/Indo Asian or equivalent

Bansal And Co

M/s Bapujee Builders and Traders

RPL SYNDICATE CO