SUPPLY AND FURNITURE OF FURNITURES AND FIXTURES FOR NEWLY CONSTRUCTED MULTISTORED OFFICE COMPLEX SLDC,MANCHESWAR OPTCL,BHUBANESWAR

Amount

Description

Cafeteria Table

Supply and Installation of Cafeteria table with Metal under Seateructure Rectangular Top Café Top – Is made up of Work top shall be made 25mm thick MDF With Membrane Finish. UnderSeateructure - LEG conSeateructed of 40X40X1.6 mm M.S. pipe confirming IS-Grade 4932 with powder coated finish up 50 to 60 Micron. Legs shall be fitted to the ground with M8 screw leveler with the height adjustment up to 12mm to 15mm.Cross member shall be made of 40mm X 40mm X 1.6mm MS LIP Section with powder coated finish confirming to IS 4932. Cross members shall be mounted by end brackets with powder coated finish up 50 to 60 Micron.Size :- 1200mm (W) x 750 (D) x 750mm (H)

Cafeteria Chair

Supply and installation of Dining Chair Made from Organic Pigments With plastic integrated legs. High Uv Stability For 500 Hours. Chair features a modern ergonomic profile with a gently curved backrest .Overall chair height - 830 mm with a standard seat Height- 460 mm (from ground ) , The seat width ranges between 420 to 460 mm offering ample space for comfortable seating,Scratch Resistant chair Surface,Stackable for Better Space Management , having load bearing capacity up to 100 Kg. Preferable colour - Red , White & Green .The material must be recyclable and packaging options include fully assembled . Incluiding all fixtures and fastners, etc complete as per required shade and colour

Closed Type Conference Table 4 Access Flap & Wire Managment (9600m (W) x 3000 (D) x 750mm (H))

Providing and fixing in Position Conference Table having Top made in 18+18mm thick MDF Membrane Finish with PVC Chrome Seaterip and reverse waterfall edge. Modesty made in 18mm thick PPB With PVC Edgebanding. Legs made in combination of Membrane Finish MDF and Prelam MDF with PVC Chrome Seaterip, 400mm Access Flap With Electrical Box & Vertebrae. including all fixtures and fasteners, etc complete as per required shade and colour.

Premiun High Back Chair

Providing and Fixing in Position High Back Chair having 4D Adjustable Arm Pu Pad, Auto Weight Slider Mechanism, Aluminium Base, 60mm Twin Wheel Castor, Adjustable Headrest, Samhongsa Class 4 Gas Lift Korean Mesh, Fabric Finished Cushioned Seat.incluiding all fixtures and fastners, etc complete as per required shade and colour.

Mid Back Chair

Providing and fixing in Position Mid Back Chair, Nylon Eco Base, Synchro Tilt Mechanishm with Single Point Locking, 1D PP Arms, Fabric finished Seat with Mesh Back. Including all fixtures and fastners, etc complete as per required shade and colour.

LOW HT STORAGE(1800mm (W) x 450mm (D) x 750mm (H)

Top- Overall thick ness of storage top is 25mm, which is made of 18mm Prelam BSL particle board confirming to IS12823: 1990 with 0.4 mm thick PVC lipping glued with Kliberit-779. Storage Body- The construction shall be aesthetically appealing completely knock down conSeateruction .side panel and back panel is made from 18 mm Prelam (OSL) particle board conforming to IS 12823:1990;. All the exposed edges are with 2mm PVC lipping& sealed edges are with 0.8mm thick PVC Lipping. Both the LH & RH side panel and back panel are connected with each other by using fittings such as Minifix & Dowels. Shelf can be made up of 18mm Prelam (BSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Shelf is to be mounted on shelf pin and self-height can be adjusted with in the limit. Prelam Shutter- The complete storage shall have two shutters of 18mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue and are hinged shutter with equal with hung with 0 Crank on side panel and 9.5 crank hinges on middle vertical panel. Flush type handle is used in both the shutter of 96mm CD(center to center distance handle hole). Black color PVC door Seaterip and multi-purpose square lock.

Primium Sofa (3 Seater)

Providing and fixing in Position Sofa made up of Wood + ply frame with 32 density foam and leatherite finish incluiding all fixtures and fastners, etc complete as per required shade and colour.

Centre Table ( 900mm (W) x 600 (D) x 450mm (H) )

Supply and installation of center table TOP- Is to be made up of 25mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Reversed chamfering is to be done on all sides for the table and chamfered area is to be sealed by white foil. Top should under goes from distributed for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. UnderSeateructure- Legs vertical member are to be made up of ∅32X1.2mm thk swage pipe the confirming the IS grade IS 2385: 1977 with powder coated finish up to 50 to 60 Micron. Leg should have have a length of 425mm.Horizontal member is to be supported to the vertical member. Horizontal member should be made up of 40X20X1.2mm thk pipe confirming the IS grade IS 2385: 1977 with powder coated finish up to 50 to 60 Micron. Bracket is to be welded on horizontal member by MIG welding. Brackets are to be made up of 2mm thick CRCA sheet confirming to IS 513:2008, M6 Hex nuts are to be welded on bracket. Both the leg assembly is to be connected with 2 no’s cross member. Cross member should be made up of40X20X1.2mm thk pipe confirming the IS grade IS 2385: 1977 with powder coated finish up to 50 to 60 Micron. Both the cross member should be connected with leg assembly by using M6 Allen bolt.

Corner Table (600mm (W) x 600 (D) x 450mm (H) )

Supply and installation of corner table TOP- Is to be made up of 25mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Reversed chamfering is to be done on all sides for the table and chamfered area isto be sealed by white foil. Top is to under goes from diSeateributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. UnderSeateructure- Legs vertical member areto be made up of ∅32X1.2mm thk swage pipe the confirming the IS grade IS 2385: 1977 with powder coated finish up to 50 to 60 Micron. Leg should have a length of 425mm.Horizontal member is to be supported to the vertical member. Horizontal member is to be made up of 40X20X1.2mm thk pipe confirming the IS grade IS 2385: 1977 with powder coated finish up to 50 to 60 Micron. Bracket is to be welded on horizontal member by MIG welding. Brackets should made up of 2mm thick CRCA sheet confirming to IS 513:2008, M6 Hex nuts are to be welded on bracket. Both the leg assembly is to be connected with 2 no’s cross member. Cross member should made up of 40X20X1.2mm thk pipe confirming the IS grade IS 2385: 1977 with powder coated finish up to 50 to 60 Micron. Both the cross member is to be connected with leg assembly by using M6 Allen bolt.

Premium 2 Seater sofa(2 Seaters)

Providing and fixing in Position Sofa made up of Wood + ply frame with 32 density foam and leatherite finish incluiding all fixtures and fastners, etc complete as per required shade and colour.

4 Door - Metal Locker(800(W) X 450(D) X 1800(H))

Supply and installation of 4-Door Vertical Metal Locker- Material-CRCA (Cold Rolled Close Annealed) mild steel,Sheet thickness - Body: 0.7 mm,Doors: 0.9 mm, Construction - Single vertical frame with 4 independent locker compartments,Each locker should have its individual lock with staple lock,Doors provided with ventilation slots and label holders, Finish - Pre-treated with anti-rust solution Finished with powder coating in required shade Powder coating thickness: minimum 50–60 microns, Features: Internal stiffeners for door strength, Concealed hinges or welded-type hinges for durability,Option for numbering plates or name tags,Rubber buffers to reduce noise during closing.

8 Door - Metal Locker(800(W) X 450(D) X 1800(H))

Supply and installation of 8-Door Vertical Metal Locker- Material-CRCA (Cold Rolled Close Annealed) mild steel,Sheet thickness - Body: 0.7 mm,Doors: 0.9 mm, Construction - Single vertical frame with 4 independent locker compartments,Each locker should have its individual lock with staple lock,Doors provided with ventilation slots and label holders, Finish - Pre-treated with anti-rust solution Finished with powder coating in required shade Powder coating thickness: minimum 50–60 microns, Features: Internal stiffeners for door Strength,Concealed hinges or welded-type hinges for durability,Option for numbering plates or name tags,Rubber buffers to reduce noise during closing.

Recliner Manual Chair

Providing and fixing in position Recliner Chair having made up of Wood + ply frame with 32 density foam and leatherite finish incluiding all fixtures and fastners, etc complete as per required shade and colour.

Office Table With 3 Drawer & CPU Trolly (training Table)Table Size - 1500x600x750 Pedestal Size - 400x450x650

Supply, Fitting & Fixing of Office Table With Side Storage Work Top - Work top shall be made 25mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Table top is under goes from diSeateributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. UnderSeateructure - LEG conSeateructed of 40X40X1.6 mm M.S. pipe confirming IS-Grade 4932 with powder coated finish up 50 to 60 Micron. Legs shall be fitted to the ground with M8 screw leveler with the height adjustment up to 12mm to 15mm.Cross member shall be made of 40mm X 40mm X 1.6mm MS LIP Section with powder coated finish confirming to IS 4932. Cross members shall be mounted by end brackets. Cross member end bracket shall be made of 3mm thick IS 513: 2008 CRCA sheet with powder coated finish up 50 to 60 Micron.

Pedestal :- Supply, Fitting & Fixing of 3 drawer pedestal Body –Top panel , LH and RH side panel Base panel made up of 18mm thick and Back panel 9 mm thick Prelam MDF board confirming the grade SBG II of IS 12406/Latest With PVC edgebanding glued with Kliberit-779.6 glue . Pedestal body shall be fitted to the ground with M6 levelers . Drawer- It is to be made up of 0.7mm CRCA sheet confirming to IS 513: 2008 with powder coated finish up to 50 to 60 Micron. Drawer Fascia should be made up of 18mm thick Prelam MDF board confirming the grade SBG II of IS 12406/Latest with PVC edgebanding glued with Kliberit-779.6 glue . C type handle is to be mounted on fascia. Box drawers mounted on 27x400mm Telescopic slide with 3/4 extension and File Drawer mounted on 37x400mm Telescopic slide with full extension. Box drawer in 352x400x70mm and File drawer in 352x400x 245mm may be considered. Provision of centralize locking for all the drawers. Multi drawer lock system may be considered incluiding all fixtures and fastners, etc complete as per required shade and colour.

Metal Almirah Without Locker Size - 900(W) X 485(D) X 1980

Providing and fixing in position metal almirah of size 900mm (W) x 485mm (D) x 1980mm (H) fabricated from high-quality CRCA steel sheets in combination of 0.7 mm and 0.8 mm thickness, duly powder coated, including all necessary fixtures, Width: 900 mm,Depth: 485 mm,Height: 1980 mm,Material,Finish Powder coating in required shade (minimum 50-60 microns thickness)Finish should be smooth, uniform, corrosion-resistant, and scratch-proof CRCA Steel Sheet: Body and shelves: 0.7 mm thick Doors and Seateructural members: 0.8 mm thick.

Office Table With 3 Drawer Size :- 1200mm (W) x 600mm (D) x 750mm(H)

Supply, Fitting & Fixing of Office Table - Work Top- Shall be made up of Work top shall be made 25mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Work top is to be under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section Under Structure- Modesty panel shall be made of 18mm thick Prelam BSL particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Gable ends shall be made of 25mm thick Prelam BSL particle board confirming to IS12823: 1990. The construction shall be aesthetically appealing completely knock down construction fitting is to be done by using the Minifix & Dowels. Gable end height shall be 725mm and its depth is to be varies as per the depth of work top. Standard depth of work top should be 600mm and 750mm.

Pedestal :- Supply, Fitting & Fixing of 3 drawer pedestal Body –Top panel , LH and RH side panel Base panel is to be made up of 18mm thick and Back panel 9 mm thick Prelam MDF board confirming the grade SBG II of IS 12406/Latest With PVC edgebanding glued with Kliberit-779.6 glue . Pedestal body shall be fitted to the ground with M6 levelers . Drawer- It is to be made up of 0.7mm CRCA sheet confirming to IS 513: 2008 with powder coated finish up to 50 to 60 Micron. Drawer Fascia should be made up of 18mm thick Prelam MDF board confirming the grade SBG II of IS 12406/Latest with PVC edgebanding glued with Kliberit-779.6 glue . C type handleis to be mounted on fascia. Box drawers is to be mounted on 27x400mm Telescopic slide with 3/4 extension and File Drawer mounted on 37x400mm Telescopic slide with full extension. Box drawer in 352x400x70mm and File drawer in 352x400x 245mm may be considered. Provision of centralize locking for all the drawers. Multi drawer lock system is needed incluiding all fixtures and fastners, etc complete as per required shade and colour.

Mid Ht Storage 900mm (W) x 450mm (D) x 1200mm (H)

Top- Overall thick ness of storage top is 25mm, which is made of 18mm Prelam BSL particle board confirming to IS12823: 1990 with 0.4 mm thick PVC lipping glued with Kliberit-779. Storage Body- The construction shall be aesthetically appealing completely knock down construction .side panel and back panel is to be made from 18 mm Prelam (OSL) particle board conforming to IS 12823:1990;. All the exposed edges are to be with 2mm PVC lipping& sealed edges are to be with 0.8mm thick PVC Lipping. Both the LH & RH side panel and back panel are to be connected with each other by using fittings such as Minifix & Dowels. Shelf can be made up of 18mm Prelam (BSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Shelf is to be mounted on shelf pin and self-height can be adjusted with in the limit. Prelam Shutter- The complete storage shall have two shutters of 18mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue and are to be hinged shutter with equal with hung with 0 Crank on side panel and 9.5 crank hinges on middle vertical panel. Flush type handle is to be used in both the shutter of 96mm CD(center to center distance handle hole). Black color PVC door Seaterip and multi-purpose square lock.

3 Seater (Sofa) 3 seaters

Supply and placing of Star Sofa over all dimension for 3 Seater -1930mm length and over all height is 890 mm,over all width is 780 mm, seat height is 430 mm and seat depth is,530mm . Frame : Made up of Sturdy internal frame should be constructed from a combination of wood and 12 mm plywood frame . Seat & Back : The seat and backrest shall be cushioned using high-quality foam of 32 density with foam thicknes 95 mm to ensure comfort and long-lasting resilience with leatherite and fabric finish . Armrest : Is to be made up of high quality leatherite with soft foam padding over a sturdy internal frame having thickness 175 mm,length 760 mm and height 520 mm. Leg : Should be SS frame type leg having overall dimensions 45mmx45mmx160mm. Incluiding all fixtures and fastners, etc complete as per required shade and colour.

1 Seater (Sofa) 1 seater

Supply and placing of Star Sofa over all dimension for 1 Seater -910mm length and over all height is 890 mm,over all width is 780 mm, seat height is 430 mm and seat depth is,530mm . Frame : Should be made up of Sturdy internal frame constructed from a combination of wood and 12 mm plywood frame . Seat & Back : The seat and backrest shall be cushioned using high-quality foam of 32 density with foam thicknes 95 mm to ensure comfort and long-lasting resilience with leatherite and fabric finish . Armrest : It is to be made up of high quality leatherite with soft foam padding over a sturdy internal frame having thickness 175 mm,length 760 mm and height 520 mm. Leg : SS frame type leg having overall dimensions 45mmx45mmx160mm Incluiding all fixtures and fastners, etc complete as per required shade and colour.

MAIN TABLES with ERU attached Pedestal (Table) Size :- 2100mm (W) x 2100 (D) x 750mm (H)

Providing and Fixing in Position Director Suit having Office Table Top & Gable End made up of 18+18mm Thick Postlam Particle Board having Visible Side 1mm Thick SF Laminate & Non-visble Side White Balancing With PVC Edgebanding and Modesty made up of 18mm Thick Postlam Particle Board having Both Side 1mm Thick SF Laminate With PVC Edgebanding. 400mm Access Flap With Electrical Box Duly Powder Coated Including Vertebrae. Side Storage 3 Drawer + 1 Shutter Top- Overall thickness of storage top is to be made of 18mm Prelam BSL particle board confirming to IS12823: 1990 with 0.4 mm thick PVC lipping glued with Kliberit-779 and 8mm Thick PPB board Main Body-The construction shall be aesthetically appealing completely knock down construction . Side panel and middle vertical panel is to be made from 18 mm Prelam (BSL) particle board conforming to IS 12823:1990;. All the exposed edges are to be with 2mm PVC lipping & sealed edges with 0.4 mm thick PVC Lipping. Both the LH & RH side panel and back panel are to be connected with each other by using fittings such as Minifix & Dowels. Back Panel is to be made up of 9mm thick prelam particle board confirming to IS 12823: 1990 which slides in both side panel. Shelf can be made up of 18mm Prelam (BSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Shelf is mounted on shelf pin and self-height can be adjusted with in the limit. Shutter-LH and RH shutter is to be made up of 18mm Prelam (BSL) particle board conforming to IS 12823:1990 all the exposed edges are to be with 2mm PVC lipping and hinged shutter with equal with hung with 0 Crank on side panel and 9.5 crank hinges on middle vertical panel. C type SS brush finish handle is to be used in both the shutter of 96mm CD(center to center distance handle hole). multi-purpose square lock (Hettich or Ebco) may be considered. Drawer- Drawer body is to be made up of 12mm Prelam (OSL) particle board conforming to IS 12823:1990 and drawer base is to be made up of 9mm thick Prelam (OSL) particle board conforming to IS 12823:1990.fasciato be made up of 18mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue.PVC flush handle isto be used for handling the Box drawers mounted on 27x400mm Telescopic slide with 3/4 extension and File Drawer should be mounted on 37x400mm Telescopic slide with full extension. File drawer in 340x400x317mm. Provision of centralize locking for all the drawers.multi drawer lock system may be there.

BACK UNIT (Storage) 2350(W) X 500(D) X 1800(H)

Providing and Fixing in Position - Supply and Installation of Back Storage with Storage - The construction shall be aesthetically appealing completely knock down construction ensuring ease of assembly and transportation . All wooden grain finish surfaces, including shutters and vertical elements, shall be made from MDF with a high-quality membrane foil finish, ensuring seamless edges and a premium look. All plain-colored surfaces, such as Storage top, side, and internal Seateructural panels, shall be constructed from Pre-Laminated Particle Board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779. The unit shall feature a combination of open shelves and two sliding shutters at the bottom for concealed storage, designed with smooth sliding channels for easy operation. All visible edges of Prelam PB shall be sealed with 2 mm thick PVC edge banding using hot-melt glue Kleiberit to prevent moisture ingress and enhance durability. incluiding all high quality hardwares, fixtures and fastners, etc complete as per required shade and colour

Marvel-Mid Back (Chair)

Providing and Fixing in Position Mid Back Chair having Foam Seat And Mesh Back, PP Fixed Arm, Butterfly Mechanism With Tilting Function, Bifma G320mm Nylon Base, Nylon Castors And Gas Lift 100mm. incluiding all fixtures and fastners, etc complete as per required shade and colour.

3seater Sofa Size :- 3 Seater

Supply and placing of Sofa over all dimension for 3 Seater -1950mm length and over all height is 800 mm,over all width is710 mm, seat height is 460 mm and seat depth is,570mm . Frame : Should be made up of Sturdy internal frame conSeateructed from a 12 mm plywood frame . Seat & Back : The seat and backrest shall be cushioned using high-quality foam of 32 density with foam thicknes 45 mm to ensure comfort and long-lasting resilience with leatherite and fabric finish . Armrest : Should be made up of high quality leatherite with soft foam padding over a sturdy internal wooden frame having thickness 90 mm,length 585 mm and height 635 mm. Leg : Should be made up of Wooden having overall dimensions 50mmx30mmx160mm. Incluiding all fixtures and fastners, etc complete as per required shade and colour.

1 seater Sofa Size :- 1 Seater

Supply and placing of Sofa over all dimension for 1 Seater -950,1400mm length and over all height is 800 mm,over all width is710 mm, seat height is 460 mm and seat depth is,570mm . Frame : Should be made up of Sturdy internal frame conSeateructed from a 12 mm plywood frame . Seat & Back : The seat and backrest shall be cushioned using high-quality foam of 32 density with foam thicknes 45 mm to ensure comfort and long-lasting resilience with leatherite and fabric finish . Armrest :Should be made up of high quality leatherite with soft foam padding over a sturdy internal wooden frame having thickness 90 mm,length 585 mm and height 635 mm. Leg : Should be made up of Wooden having overall dimensions 50mmx30mmx160mm. Incluiding all fixtures and fastners, etc complete as per required shade and colour.

Office Table + Side Storage Table :- 1500mm (W) x 750 (D) x 750mm (H) Side St :- 900mm (W) x 450 (D) x 750mm (H)

Supply, Fitting & Fixing of Office Table With Side Storage Work Top - Work top shall be made 25mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Table top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. Under Structure - LEG constructed of 40X40X1.6 mm M.S. pipe confirming IS-Grade 4932 with powder coated finish up 50 to 60 Micron. Legs shall be fitted to the ground with M8 screw leveler with the height adjustment up to 12mm to 15mm.Cross member shall be made of 40mm X 40mm X 1.6mm MS LIP Section with powder coated finish confirming to IS 4932. Cross members shall be mounted by end brackets. Cross member end bracket shall be made of 3mm thick IS 513: 2008 CRCA sheet with powder coated finish up 50 to 60 Micron. Return storage Top- Overall thick ness of storage top is 25mm, Prelam BSL particle board confirming to IS12823: 1990 with 0.4 mm thick PVC lipping glued with Kliberit-779.Main Body-The construction shall be aesthetically appealing completely knock down construction . Side panel and middle vertical panel is to be made from 18 mm Prelam (BSL) particle board conforming to IS 12823:1990;. All the exposed edges are to be with 2mm PVC lipping & sealed edges with 0.4 mm thick PVC Lipping. Both the LH & RH side panel and back panel are to be connected with each other by using fittings such as Minifix & Dowels. Back Panel shall be made up of 9mm thick prelam particle board confirming to IS 12823: 1990 which slides in both side panel. Shelf can be made up of 18mm Prelam (BSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Shelf is mounted on shelf pin and self-height can be adjusted with in the limit. Shutter-LH and RH shutter is made up of 18mm Prelam (BSL) particle board conforming to IS 12823:1990 all the exposed edges shall be with 2mm PVC lipping and are to be hinged shutter with equal with hung with 0 Crank on side panel and 9.5 crank hinges on middle vertical panel.multi-purpose square lock may be preffered.

Drawer - Drawer body is made up of 12mm Prelam (OSL) particle board conforming to IS 12823:1990 and drawer base is made up of 9mm thick Prelam (OSL) particle board conforming to IS 12823:1990.fascia made up of 18mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue.PVC flush handle is used for handling the Box drawers mounted on 27x400mm Telescopic slide with 3/4 extension and File Drawer mounted on 37x400mm Telescopic slide with full extension.standard drawer are offered Box drawer and File drawer Provision of centralize locking for all the drawers.multi drawer lock system is offered.

High Back (Chair)

Providing and Fixing in Position High Back Chair having, Nylon Eco Base, Synchro Tilt Mechanishm with Single Point Locking, 1D PP Arms, Fabric finished Seat with Mesh Back, Adjustable Headrest. incluiding all fixtures and fastners, etc complete as per required shade and colour.

Visitor Chair With Arms

Providing and Fixing in Position Low Back Fix Chair Foam Seat and Mesh Back, PP Fixed Arm, Fixed Chair With 25mm dia Pipe Frame Leg Duly Powder Coated. incluiding all fixtures and fasteners, etc complete as per required shade and colour

U shape Conference Table 1 Access Flap & Wire Management Size :- 4200m (W) x 2000 (D) x 750mm (H)

Providing and fixing in Position Conference Table having Top made in 18+18mm thick MDF Membrane Finish with PVC Chrome Seaterip and reverse waterfall edge. Modesty made in 18mm thick PPB With PVC Edgebanding. Legs made in combination of Membrane Finish MDF and Prelam MDF with PVC Chrome Seaterip, 400mm Access Flap With Electrical Box & Vertebrae. including all fixtures and fasteners, etc complete as per required shade and colour.

3 Drawer Pedestal Size :- 400 X 450 X 650

Pedestal :- Supply, Fitting & Fixing of 3 drawer pedestal Body –Top panel , LH and RH side panel Base panel is to be made up of 18mm thick and Back panel 9 mm thick Prelam MDF board confirming the grade SBG II of IS 12406/Latest With PVC edge banding glued with Kliberit-779.6 glue . Pedestal body shall be fitted to the ground with M6 levelers . Drawer- It is to be made up of 0.7mm CRCA sheet confirming to IS 513: 2008 with powder coated finish up to 50 to 60 Micron. Drawer Fascia should be made up of 18mm thick Prelam MDF board confirming the grade SBG II of IS 12406/Latest with PVC edgebanding glued with Kliberit-779.6 glue . C type handle is to be mounted on fascia.Box drawers mounted on 27x400mm Telescopic slide with 3/4 extension and File Drawer mounted on 37x400mm Telescopic slide with full extension. Box drawer in 352x400x70mm and File drawer in 352x400x 245mm. Provision of centralize locking for all the drawers needed alongwith Multi drawer lock system. incluiding all fixtures and fastners, etc complete as per required shade and colour.

Modular Workstation 1500 mm X 1500 mm with Mobile pedestal, KBPT Size :- 1500/1500mm (W) x 600/600mm (D) x 750/1050mm(H)

Supply, Fitting & Fixing of Non-Sharing Cluster Workstation- Work Top - Work top shall be made 25mm thick Work Top - Work top shall be made 25mm thick Prelam particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue.Table top under goes from diSeateributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. Under Structure - DISPLAYED LEG constructed of 40X40X1.6 mm M.S. pipe confirming IS-Grade 4932 with powder coated finish up 50 to 60 Micron. Legs shall be fitted to the ground with M8 screw leveler with the height adjustment up to 12mm to 15mm.Cross member shall be made of 40mm X 40mm X 1.6mm MS LIP Section with powder coated finish confirming to IS 4932. Cross members shall be mounted by end brackets. Cross member end bracket shall be made of 3mm thick IS 513: 2008 CRCA sheet with powder coated finish up 50 to 60 Micron. 18mm thick MAGNETIC FABRIC SCREEN- Fabric Screen shall be made of 18mm thick Particle Board with 0.35mm GI sheet and Fabric wrapped on it Screen is supported by Die-cast clamp which will be mounted on aluminum section. Complete screen periphery is to be covered by aluminum(6063-T6) T-bidding powder coated finished in 50 to 60 micron Wire management – Electrical wires shall be carried from Electrical leg Or Cable tray shall be made of 0.7mm CRCA sheet confirming to IS 513:2008. Access flap will be fitted on work top above to the cable tray. Access flap of length 400 mm and its components shall be made of aluminum extrusions of material AL6963-T6. incluiding all fixtures and fastners, etc complete as per required shade and colour. Table top under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. Under Structure - IDISPLAYED LEG constructed of 40X40X1.6 mm M.S. pipe confirming IS-Grade 4932 with powder coated finish up 50 to 60 Micron. Legs shall be fitted to the ground with M8 screw leveler with the height adjustment up to 12mm to 15mm.Cross member shall be made of 40mm X 40mm X 1.6mm MS LIP Section with powder coated finish confirming to IS 4932. Cross members shall be mounted by end brackets. Cross member end bracket shall be made of 3mm thick IS 513: 2008 CRCA sheet with powder coated finish up 50 to 60 Micron. 18mm thick MAGNETIC FABRIC SCREEN- Fabric Screen shall be made of 18mm thick Particle Board with 0.35mm GI sheet and Fabric wrapped on it Screen is supported by Die-cast clamp which will be mounted on aluminum section. Complete screen periphery is covered by aluminum(6063-T6) T-bidding powder coated finished in 50 to 60 micron Wire management – Electrical wires shall be carried from Electrical leg Or Cable tray shall be made of 0.7mm CRCA sheet confirming to IS 513:2008. Access flap will be fitted on work top above to the cable tray. Access flap of length 400 mm and its components shall be made of aluminum extrusions of material AL6963-T6. incluiding all fixtures and fastners, etc complete as per required shade and colour.

Pedestal :- Supply, Fitting & Fixing of 3 drawer pedestal Body –Top panel , LH and RH side panel Base panel is to be made up of 18mm thick and Back panel 9 mm thick Prelam MDF board confirming the grade SBG II of IS 12406/Latest With PVC edge banding glued with Kliberit-779.6 glue . Pedestal body shall be fitted to the ground with M6 levelers . Drawer- It is to be made up of 0.7mm CRCA sheet confirming to IS 513: 2008 with powder coated finish up to 50 to 60 Micron. Drawer Fascia shall be made up of 18mm thick Prelam MDF board confirming the grade SBG II of IS 12406/Latest with PVC edgebanding glued with Kliberit-779.6 glue . C type handle is to be mounted on fascia.Box drawers mounted on 27x400mm Telescopic slide with 3/4 extension and File Drawer mounted on 37x400mm Telescopic slide with full extension. Box drawer in 352x400x70mm and File drawer in 352x400x 245mm may be there. Provision of centralize locking for all the drawers alongwith multi drawer lock system is needed incluiding all fixtures and fastners, etc complete as per required shade and colour.

L ahape Modular Workstation 1500 mm X 1500 mm with Mobile pedestal, KBPT ( L-Shape - Size :- 1500/1500mm (W) x 600/600mm (D) x 750/1050mm(H) Qty - 8 T-Shape Size :- 3000/1500mm (W) x 1200/600mm (D) x 750/1050mm(H) Qty - 3 4 Plus Type Seater Size :- 3180/3180mm (W) x 1260/1260mm (D) x 750/1200mm(H) Qty - 1)

Supply, Fitting & Fixing of Non-Sharing Cluster Workstation- Work Top - Work top shall be made 25mm thick Work Top - Work top shall be made 25mm thick Prelam particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue.Table top under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. Understructure - SPLAYED LEG constructed of 40X40X1.6 mm M.S. pipe confirming IS-Grade 4932 with powder coated finish up 50 to 60 Micron. Legs shall be fitted to the ground with M8 screw leveler with the height adjustment up to 12mm to 15mm.Cross member shall be made of 40mm X 40mm X 1.6mm MS LIP Section with powder coated finish confirming to IS 4932. Cross members shall be mounted by end brackets. Cross member end bracket shall be made of 3mm thick IS 513: 2008 CRCA sheet with powder coated finish up 50 to 60 Micron. 18mm thick MAGNETIC FABRIC SCREEN- Fabric Screen shall be made of 18mm thick Particle Board with 0.35mm GI sheet and Fabric wrapped on it Screen is supported by Die-cast clamp which will be mounted on aluminum section. Complete screen periphery is covered by aluminum(6063-T6) T-bidding powder coated finished in 50 to 60 micron Wire management – Electrical wires shall be carried from Electrical leg Or Cable tray shall be made of 0.7mm CRCA sheet confirming to IS 513:2008. Access flap will be fitted on work top above to the cable tray. Access flap of length 400 mm and its components shall be made of aluminum extrusions of material AL6963-T6. incluiding all fixtures and fastners, etc complete as per aproved shade and colour. Table top under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. Understructure - SPLAYED LEG constructed of 40X40X1.6 mm M.S. pipe confirming IS-Grade 4932 with powder coated finish up 50 to 60 Micron. Legs shall be fitted to the ground with M8 screw leveler with the height adjustment up to 12mm to 15mm.Cross member shall be made of 40mm X 40mm X 1.6mm MS LIP Section with powder coated finish confirming to IS 4932. Cross members shall be mounted by end brackets. Cross member end bracket shall be made of 3mm thick IS 513: 2008 CRCA sheet with powder coated finish up 50 to 60 Micron. 18mm thick MAGNETIC FABRIC SCREEN- Fabric Screen shall be made of 18mm thick Particle Board with 0.35mm GI sheet and Fabric wrapped on it Screen is supported by Die-cast clamp which will be mounted on aluminum section. Complete screen periphery is covered by aluminum(6063-T6) T-bidding powder coated finished in 50 to 60 micron Wire management – Electrical wires shall be carried from Electrical leg Or Cable tray shall be made of 0.7mm CRCA sheet confirming to IS 513:2008. Access flap will be fitted on work top above to the cable tray. Access flap of length 400 mm and its components shall be made of aluminum extrusions of material AL6963-T6. incluiding all fixtures and fastners, etc complete as per aproved shade and colour.

Pedestal :- Supply, Fitting & Fixing of 3 drawer pedestal Body –Top panel , LH and RH side panel Base panel made up of 18mm thick and Back panel 9 mm thick Prelam MDF board confirming the grade SBG II of IS 12406/Latest With PVC edgebanding glued with Kliberit-779.6 glue . Pedestal body shall be fitted to the ground with M6 levelers . Drawer- It is made up of 0.7mm CRCA sheet confirming to IS 513: 2008 with powder coated finish up to 50 to 60 Micron. Drawer Fascia made up of 18mm thick PPB board confirming the grade SBG II of IS 12406/Latest with PVC edgebanding glued with Kliberit-779.6 glue . C type handle to be mounted on fascia.Box drawers mounted on 27x400mm Telescopic slide with 3/4 extension and File Drawer mounted on 37x400mm Telescopic slide with full extension. Generally 2 types of standard drawer are offered Box drawer in 352x400x70mm and File drawer in 352x400x 245mm. Provision of centralize locking for all the drawers. Multi drawer lock system is offered. incluiding all fixtures and fastners, etc complete as per required shade and colour.

3 Seater Chair 1735(W) X 620(D) X 900(H)

Supply and placing of 3 seater chair leg, seat and back isto be made in 1.0 mm thickness cold rolled ms sheet, arm rest made in 1.2 mm ms sheet and center support made in 2.0mm thickness ms sheet, finished with powder coating. Incluiding all fixtures and fastners, etc complete as per required shade and colour.The seat and backrest are to be provided with PU foam cushioning upholstered with leatherette,Cushioned seat and back: PU foam (minimum 40 density)

1 Seater Chair 644(W) X 620(D) X 900(H)

Supply and placing of 1 seater chair leg, seat and back is made in 1.0 mm thickness cold rolled ms sheet, arm rest made in 1.2 mm ms sheet and center support made in 2.0mm thickness ms sheet, finished with powder coating. Incluiding all fixtures and fastners, etc complete as per required shade and colour.The seat and backrest are to be provided with PU foam cushioning upholstered with leatherette,Cushioned seat and back: PU foam (minimum 40 density)

Center Table 900mm (W) x 450 (D) x 420mm (H)

Supply and placing of Centre Table made up of MDF with Melamine Polish and glass at the centre to enhance its look incluiding all fixtures and fastners, etc complete as per required shade and colour

High Back Chair (Overall height 950 to 1100mm Seat Rest Dimensions - 480WX490D Back Rest Dimensions - 410WX550H)

Supplying and placing a High Back chair having overall height 950 to 1100mm Seat Rest Dimensions - 480WX490D Back Rest Dimensions - 410WX550H Head rest should be provided for high back. Head rest should be height adjustable. Chair Base -sturdy Nylon Eco Base and should be BIFMA compliant and tested for 1150 kg of load. Castors- Castors should be twin wheel castors having 40 mm dia. It should be BIFMA Compliant and tested with 102 kg on seat for 1,00,000 Cycles. Mechanisim :- The chair will be equipped with a Synchro Tilt Mechanishm with Single Point Locking allowing for smooth reclining functionality with one lever. Armrest : - The armrests will be 1D adjustable for additional comfort and support and made up of injection moulded from black polypropylene . Chair Seat & Back : - The seat shall be made up of 12mm thick (7 layers) hot pressed plywood and moulded seat foam upholstered with fabric, while the back rest will be made of breathable mesh to ensure comfort during extended use. The back has to be adjustable lumber support for achieving comfortable seating posture.Incluiding all fixtures and fastners, etc complete as per required shade and colour.

MAIN TABLES with ERU attached Pedestal ( 2100mm (W) x 2100mm (D) x 750mm (H))

Supply and installation of Cabin Table Work Top- work top is made up of 18 mm thick Prelam (BSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.Table Top end to end molding in MDF board of grade SBG II of IS 12406/Latest from the table top, this batten is covered of table top. Table top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. Under structure- Gable ends shall be made of 25mm thick Prelam BSL particle board confirming to IS12823: 1990 with 0.4 mm thick PVC lipping glued with Kliberit-779. Modesty panel shall be made of 18mm thick Prelam BSL particle board confirming to IS 12823: 1990 with 0.4 mm thick PVC lipping glued with Kliberit-779.6 glue. The construction shall be aesthetically appealing completely knock down construction fitting is done by using the Minifix & Dowels. Special design aluminum strip is grove for decorative purpose. Gable end height will be 701mm and its depth varies as per the depth of work top.Return storage Top- Overall thick ness of storage top is 25mm, which is made of 18mm Prelam BSL particle board confirming to IS12823: 1990 with 0.4 mm thick PVC lipping glued with Kliberit-779. Main Body-The construction shall be aesthetically appealing completely knock down construction .side panel and middle vertical panel is made from 18 mm Prelam (BSL) particle board conforming to IS 12823:1990;. All the exposed edges are with 2mm PVC lipping& sealed edges are with 0.4 mm thick PVC Lipping. Both the LH & RH side panel and back panel are connected with each other by using fittings such as Minifix & Dowels. Back Panel is made up of 9mm thick prelam particle board confirming to IS 12823: 1990 which slides is both side panel. Shelf can be made up of 18mm Prelam (BSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Shelf is mounted on shelf pin and self-height can be adjusted with in the limit. Shutter-LH and RH shutter is made up of 18mm Prelam (BSL) particle board conforming to IS 12823:1990 all the exposed edges are with 2mm PVC lipping. are hinged shutter with equal with hung with 0 Crank

Pedestal :- Supply, Fitting & Fixing of 3 drawer pedestal Body –Top panel , LH and RH side panel Base panel made up of 18mm thick and Back panel 9 mm thick Prelam MDF board confirming the grade SBG II of IS 12406/Latest With PVC edgebanding glued with Kliberit-779.6 glue . Pedestal body shall be fitted to the ground with M6 levelers . Drawer- It is made up of 0.7mm CRCA sheet confirming to IS 513: 2008 with powder coated finish up to 50 to 60 Micron. Drawer Fascia made up of 18mm thick Prelam MDF board confirming the grade SBG II of IS 12406/Latest with PVC edgebanding glued with Kliberit-779.6 glue . C type handle to be mounted on fascia.Box drawers mounted on 27x400mm Telescopic slide with 3/4 extension and File Drawer mounted on 37x400mm Telescopic slide with full extension. Generally 2 types of standard drawer are offered Box drawer in 352x400x70mm and File drawer in 352x400x 245mm. Provision of centralize locking for all the drawers. Multi drawer lock system is offered. incluiding all fixtures and fastners, etc complete as per required shade and colour.

BACK UNIT (Storage) 1650(W) X 500(D) X 1800(H)

Providing and Fixing in Position - Supply and Installation of Back Storage with Storage - The construction shall be aesthetically appealing completely knock down construction ensuring ease of assembly and transportation . All wooden grain finish surfaces, including shutters and vertical elements, shall be made from MDF with a high-quality membrane foil finish, ensuring seamless edges and a premium look. All plain-colored surfaces, such as Storage top, side, and internal structural panels, shall be constructed from Pre-Laminated Particle Board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779. The unit shall feature a combination of open shelves and two sliding shutters at the bottom for concealed storage, designed with smooth sliding channels for easy operation. All visible edges of Prelam PB shall be sealed with 2 mm thick PVC edge banding using hot-melt glue Kleiberit to prevent moisture ingress and enhance durability. incluiding all high quality hardwares, fixtures and fastners, etc complete as per required shade and colour.

High Back (Chair)

Supply and placing of High Back Chair, Backrest - High back design for full spinal support Upholstered in premium leatherette. Seat - Upholstered in matching leatherette High-density PU foam for long-lasting comfort Waterfall edge design to reduce pressure on thighs. Armrest - Metallic PP (Polypropylene) frame with cushioned tops Soft leatherette padding for elbow comfort Mechanism - Center Tilt Mechanism with single-locking position,Tilt tension adjustable as per user's body weight, Pneumatic height adjustment via gas lift,Base - Metallic PP Base (aesthetic chrome/metal-look with reinforced polypropylene Seateructure) 5-prong design with dual-wheel nylon castors Stable and smooth mobility on all surfaces Ergonomically contoured for enhanced lumbar comfort.

Visitor (Chair)

Supply and placing of Visitor Chair, Backrest - design for full spinal support Upholstered in premium leatherette. Seat - Upholstered in matching leatherette High-density PU foam for long-lasting comfort Waterfall edge design to reduce pressure on thighs. Armrest - Metallic PP (Polypropylene) frame with cushioned tops Soft leatherette padding for elbow comfort,Base - Crome Finish.

Meeting Table With 3 Access Flap & Wire Management Size :-3600mm (W) x 1200 (D) x 750mm (H)

Supply, Fitting & Fixing of Conference Table - Work Top - Work top shall be made 25mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Table top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. Under Structure - LEG constructed of 40X40X1.6 mm M.S. pipe confirming IS-Grade 4932 with powder coated finish up 50 to 60 Micron. Legs shall be fitted to the ground with M8 screw leveler with the height adjustment up to 12mm to 15mm.Cross member shall be made of 40mm X 40mm X 1.6mm MS LIP Section with powder coated finish confirming to IS 4932. Cross members shall be mounted by end brackets. Cross member end bracket shall be made of 3mm thick IS 513: 2008 CRCA sheet with powder coated finish up 50 to 60 Micron. Wire management – Electrical wires shall be carried from 100x100mm vertical duct, vertical duct shall be made of 0.7mm CRCA sheet confirming to IS 513:2008. Cable tray shall be made of 0.7mm CRCA sheet confirming to IS 513:2008. cable tray for mounting electrical standard switch plate. Switch Plate shall be made up of 1.5mm CRCA sheet confirming to IS 513:2008 and cable tray by using 8x15 mm Pan Head ST Screw. Access flap will be fitted on work top above to the cable tray. Access flap and its components shall be made of aluminum extrusions of material.

Full Height Metal Storage Cabinet with Glass Doors Size - 900(W) X 485(D) X 1980

Providing and fixing in position metal almirah of size 900mm (W) x 485mm (D) x 1980mm (H) fabricated from high-quality CRCA steel sheets in combination of 0.7 mm and 0.8 mm thickness, duly powder coated, including all necessary fixtures, Width: 900 mm,Depth: 485 mm,Height: 1980 mm,Material,Finish Powder coating in required shade (minimum 50-60 microns thickness)Finish should be smooth, uniform, corrosion-resistant, and scratch-proof CRCA Steel Sheet: Body and shelves: 0.7 mm thick Doors and Structural members: 0.8 mm thick.Front doors fitted with transparent glass panels

Compactor- DRIVE TYPE (Storage)

Single face Fixed Unit 2400x400x1980

Single face Moblie Unit 2400x400x1980

Double face Moblie Unit 2400x800x1980

3 Seater Chair 1735(W) X 622(D) X 900(H)

Supply and placing of 3 seater chair leg, seat and back is made in 1.0 mm thickness cold rolled ms sheet, arm rest made in 1.2 mm ms sheet and center support made in 2.0mm thickness ms sheet, finished with powder coating. Incluiding all fixtures and fastners, etc complete as per required shade and colour.

Modular Workstation with Mobile pedestal, KBPT and CPU Trolley (Table) Size :- 1200mm (W) x 600mm (D) x 750/1050mm(H)

Supply, Fitting & Fixing of Non-Sharing Cluster Workstation- Work Top - Work top shall be made 25mm thick Work Top - Work top shall be made 25mm thick Prelam particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue.Table top under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. Under Structure - SPLAYED LEG constructed of 40X40X1.6 mm M.S. pipe confirming IS-Grade 4932 with powder coated finish up 50 to 60 Micron. Legs shall be fitted to the ground with M8 screw leveler with the height adjustment up to 12mm to 15mm.Cross member shall be made of 40mm X 40mm X 1.6mm MS LIP Section with powder coated finish confirming to IS 4932. Cross members shall be mounted by end brackets. Cross member end bracket shall be made of 3mm thick IS 513: 2008 CRCA sheet with powder coated finish up 50 to 60 Micron. 18mm thick MAGNETIC FABRIC SCREEN- Fabric Screen shall be made of 18mm thick Particle Board with 0.35mm GI sheet and Fabric wrapped on it Screen is supported by Die-cast clamp which will be mounted on aluminum section. Complete screen periphery is covered by aluminum(6063-T6) T-bidding powder coated finished in 50 to 60 micron Wire management – Electrical wires shall be carried from Electrical leg Or Cable tray shall be made of 0.7mm CRCA sheet confirming to IS 513:2008. Access flap will be fitted on work top above to the cable tray. Access flap of length 400 mm and its components shall be made of aluminum extrusions of material AL6963-T6. incluiding all fixtures and fastners, etc complete as per required shade and colour. Table top under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. Under Structure - SPLAYED LEG constructed of 40X40X1.6 mm M.S. pipe confirming IS-Grade 4932 with powder coated finish up 50 to 60 Micron. Legs shall be fitted to the ground with M8 screw leveler with the height adjustment up to 12mm to 15mm.Cross member shall be made of 40mm X 40mm X 1.6mm MS LIP Section with powder coated finish confirming to IS 4932. Cross members shall be mounted by end brackets. Cross member end bracket shall be made of 3mm thick IS 513: 2008 CRCA sheet with powder coated finish up 50 to 60 Micron. 18mm thick MAGNETIC FABRIC SCREEN- Fabric Screen shall be made of 18mm thick Particle Board with 0.35mm GI sheet and Fabric wrapped on it Screen is to be supported by Die-cast clamp which will be mounted on aluminum section. Complete screen periphery is covered by aluminum(6063-T6) T-bidding powder coated finished in 50 to 60 micron Wire management – Electrical wires shall be carried from Electrical leg Or Cable tray shall be made of 0.7mm CRCA sheet confirming to IS 513:2008. Access flap will be fitted on work top above to the cable tray. Access flap of length 400 mm and its components shall be made of aluminum extrusions of material AL6963-T6. incluiding all fixtures and fastners, etc complete as per required shade and colour.

Pedestal :- Supply, Fitting & Fixing of 3 drawer pedestal Body –Top panel , LH and RH side panel Base panel is to be made up of 18mm thick and Back panel 9 mm thick Prelam MDF board confirming the grade SBG II of IS 12406/Latest With PVC edgebanding glued with Kliberit-779.6 glue . Pedestal body shall be fitted to the ground with M6 levelers . Drawer- It is to be made up of 0.7mm CRCA sheet confirming to IS 513: 2008 with powder coated finish up to 50 to 60 Micron. Drawer Fascia shall be made up of 18mm thick Prelam MDF board confirming the grade SBG II of IS 12406/Latest with PVC edgebanding glued with Kliberit-779.6 glue . C type handle is to be mounted on fascia.Box drawers mounted on 27x400mm Telescopic slide with 3/4 extension and File Drawer mounted on 37x400mm Telescopic slide with full extension. Box drawer in 352x400x70mm and File drawer in 352x400x 245mm is needed. Provision of centralize locking for all the drawers. Multi drawer lock system is required incluiding all fixtures and fastners, etc complete as per required shade and colour.

Modular Workstation Wish with Mobile pedestal, KBPT and CPU Trolley (Table) 2 Seater Qty 1 Size :- 2400mm (W) x 600mm (D) x 750/1200mm(H) 1 Seater - :- 1200mm (W) x 600mm (D) x 750/1200mm(H)

Supply, Fitting & Fixing of Non-Sharing Cluster Workstation- Work Top - Work top shall be made 25mm thick Work Top - Work top shall be made 25mm thick Prelam particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue.Table top under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. UnderSeateructure - SPLAYED LEG constructed of 40X40X1.6 mm M.S. pipe confirming IS-Grade 4932 with powder coated finish up 50 to 60 Micron. Legs shall be fitted to the ground with M8 screw leveler with the height adjustment up to 12mm to 15mm.Cross member shall be made of 40mm X 40mm X 1.6mm MS LIP Section with powder coated finish confirming to IS 4932. Cross members shall be mounted by end brackets. Cross member end bracket shall be made of 3mm thick IS 513: 2008 CRCA sheet with powder coated finish up 50 to 60 Micron. 18mm thick MAGNETIC FABRIC SCREEN- Fabric Screen shall be made of 18mm thick Particle Board with 0.35mm GI sheet and Fabric wrapped on it Screen is supported by Die-cast clamp which will be mounted on aluminum section. Complete screen periphery is covered by aluminum(6063-T6) T-bidding powder coated finished in 50 to 60 micron Wire management – Electrical wires shall be carried from Electrical leg Or Cable tray shall be made of 0.7mm CRCA sheet confirming to IS 513:2008. Access flap will be fitted on work top above to the cable tray. Access flap of length 400 mm and its components shall be made of aluminum extrusions of material AL6963-T6. incluiding all fixtures and fastners, etc complete as per required shade and colour. Table top under shall be goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. Under Seat structure - SPLAYED LEG constructed of 40X40X1.6 mm M.S. pipe confirming IS-Grade 4932 with powder coated finish up 50 to 60 Micron. Legs shall be fitted to the ground with M8 screw leveler with the height adjustment up to 12mm to 15mm.Cross member shall be made of 40mm X 40mm X 1.6mm MS LIP Section with powder coated finish confirming to IS 4932. Cross members shall be mounted by end brackets. Cross member end bracket shall be made of 3mm thick IS 513: 2008 CRCA sheet with powder coated finish up 50 to 60 Micron. 18mm thick MAGNETIC FABRIC SCREEN- Fabric Screen shall be made of 18mm thick Particle Board with 0.35mm GI sheet and Fabric wrapped on it Screen is supported by Die-cast clamp which will be mounted on aluminum section. Complete screen periphery is to be covered by aluminum(6063-T6) T-bidding powder coated finished in 50 to 60 micron Wire management – Electrical wires shall be carried from Electrical leg Or Cable tray shall be made of 0.7mm CRCA sheet confirming to IS 513:2008. Access flap will be fitted on work top above to the cable tray. Access flap of length 400 mm and its components shall be made of aluminum extrusions of material AL6963-T6. incluiding all fixtures and fastners, etc complete as per required shade and colour.

Modular Workstation with Mobile pedestal, KBPT and CPU Trolley (Table) ( 4 Seater Qty 2 Size :- 4920mm (W) x 660mm (D) x 750/1200mm(H))

Supply, Fitting & Fixing of Non-Sharing Cluster Workstation- Work Top - Work top shall be made 25mm thick Work Top - Work top shall be made 25mm thick Prelam particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue.Table top shall under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. Under Seat structure - SPLAYED LEG constructed of 40X40X1.6 mm M.S. pipe confirming IS-Grade 4932 with powder coated finish up 50 to 60 Micron. Legs shall be fitted to the ground with M8 screw leveler with the height adjustment up to 12mm to 15mm.Cross member shall be made of 40mm X 40mm X 1.6mm MS LIP Section with powder coated finish confirming to IS 4932. Cross members shall be mounted by end brackets. Cross member end bracket shall be made of 3mm thick IS 513: 2008 CRCA sheet with powder coated finish up 50 to 60 Micron. 18mm thick MAGNETIC FABRIC SCREEN- Fabric Screen shall be made of 18mm thick Particle Board with 0.35mm GI sheet and Fabric wrapped on it Screen is supported by Die-cast clamp which will be mounted on aluminum section. Complete screen periphery is covered by aluminum(6063-T6) T-bidding powder coated finished in 50 to 60 micron Wire management – Electrical wires shall be carried from Electrical leg Or Cable tray shall be made of 0.7mm CRCA sheet confirming to IS 513:2008. Access flap will be fitted on work top above to the cable tray. Access flap of length 400 mm and its components shall be made of aluminum extrusions of material AL6963-T6. incluiding all fixtures and fastners, etc complete as per required shade and colour. Table top shall under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. Under Seat structure - SPLAYED LEG constructed of 40X40X1.6 mm M.S. pipe confirming IS-Grade 4932 with powder coated finish up 50 to 60 Micron. Legs shall be fitted to the ground with M8 screw leveler with the height adjustment up to 12mm to 15mm.Cross member shall be made of 40mm X 40mm X 1.6mm MS LIP Section with powder coated finish confirming to IS 4932. Cross members shall be mounted by end brackets. Cross member end bracket shall be made of 3mm thick IS 513: 2008 CRCA sheet with powder coated finish up 50 to 60 Micron. 18mm thick MAGNETIC FABRIC SCREEN- Fabric Screen shall be made of 18mm thick Particle Board with 0.35mm GI sheet and Fabric wrapped on it Screen is supported by Die-cast clamp which will be mounted on aluminum section. Complete screen periphery is covered by aluminum(6063-T6) T-bidding powder coated finished in 50 to 60 micron Wire management – Electrical wires shall be carried from Electrical leg Or Cable tray shall be made of 0.7mm CRCA sheet confirming to IS 513:2008. Access flap will be fitted on work top above to the cable tray. Access flap of length 400 mm and its components shall be made of aluminum extrusions of material AL6963-T6. incluiding all fixtures and fastners, etc complete as per required shade and colour.

Pedestal :- Supply, Fitting & Fixing of 3 drawer pedestal Body –Top panel , LH and RH side panel Base panel is to be made up of 18mm thick and Back panel 9 mm thick Prelam MDF board confirming the grade SBG II of IS 12406/Latest With PVC edgebanding glued with Kliberit-779.6 glue . Pedestal body shall be fitted to the ground with M6 levelers . Drawer- It is to be made up of 0.7mm CRCA sheet confirming to IS 513: 2008 with powder coated finish up to 50 to 60 Micron. Drawer Fascia made up of 18mm thick Prelam MDF board confirming the grade SBG II of IS 12406/Latest with PVC edgebanding glued with Kliberit-779.6 glue . C type handle is to be mounted on fascia.Box drawers mounted on 27x400mm Telescopic slide with 3/4 extension and File Drawer mounted on 37x400mm Telescopic slide with full extension. Box drawer in 352x400x70mm and File drawer in 352x400x 245mm is needed. Provision of centralize locking for all the drawers alongwith multi drawer lock system is required incluiding all fixtures and fastners, etc complete as per required shade and colour.

Modular Workstation Wish Recta 1200 mm X 600 mm with Mobile pedestal, KBPT and CPU Trolley (Table) Size :- 1200mm (W) x 1200mm (D) x 750/1050mm(H)

Supply, Fitting & Fixing of Non-Sharing Cluster Workstation- Work Top - Work top shall be made 25mm thick Work Top - Work top shall be made 25mm thick Prelam particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue.Table top under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. UnderSeateructure - SPLAYED LEG constructed of 40X40X1.6 mm M.S. pipe confirming IS-Grade 4932 with powder coated finish up 50 to 60 Micron. Legs shall be fitted to the ground with M8 screw leveler with the height adjustment up to 12mm to 15mm.Cross member shall be made of 40mm X 40mm X 1.6mm MS LIP Section with powder coated finish confirming to IS 4932. Cross members shall be mounted by end brackets. Cross member end bracket shall be made of 3mm thick IS 513: 2008 CRCA sheet with powder coated finish up 50 to 60 Micron. 18mm thick MAGNETIC FABRIC SCREEN- Fabric Screen shall be made of 18mm thick Particle Board with 0.35mm GI sheet and Fabric wrapped on it Screen is supported by Die-cast clamp which will be mounted on aluminum section. Complete screen periphery is to be covered by aluminum(6063-T6) T-bidding powder coated finished in 50 to 60 micron Wire management – Electrical wires shall be carried from Electrical leg Or Cable tray shall be made of 0.7mm CRCA sheet confirming to IS 513:2008. Access flap will be fitted on work top above to the cable tray. Access flap of length 400 mm and its components shall be made of aluminum extrusions of material AL6963-T6. incluiding all fixtures and fastners, etc complete as per required shade and colour. Table top under goes from dietributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. UnderSeateructure - SPLAYED LEG constructed of 40X40X1.6 mm M.S. pipe confirming IS-Grade 4932 with powder coated finish up 50 to 60 Micron. Legs shall be fitted to the ground with M8 screw leveler with the height adjustment up to 12mm to 15mm.Cross member shall be made of 40mm X 40mm X 1.6mm MS LIP Section with powder coated finish confirming to IS 4932. Cross members shall be mounted by end brackets. Cross member end bracket shall be made of 3mm thick IS 513: 2008 CRCA sheet with powder coated finish up 50 to 60 Micron. 18mm thick MAGNETIC FABRIC SCREEN- Fabric Screen shall be made of 18mm thick Particle Board with 0.35mm GI sheet and Fabric wrapped on it Screen is supported by Die-cast clamp which will be mounted on aluminum section. Complete screen periphery is covered by aluminum(6063-T6) T-bidding powder coated finished in 50 to 60 micron Wire management – Electrical wires shall be carried from Electrical leg Or Cable tray shall be made of 0.7mm CRCA sheet confirming to IS 513:2008. Access flap will be fitted on work top above to the cable tray. Access flap of length 400 mm and its components shall be made of aluminum extrusions of material AL6963-T6. incluiding all fixtures and fastners, etc complete as per required shade and colour.

Pedestal :- Supply, Fitting & Fixing of 3 drawer pedestal Body –Top panel , LH and RH side panel Base panel shall be made up of 18mm thick and Back panel 9 mm thick Prelam MDF board confirming the grade SBG II of IS 12406/Latest With PVC edgebanding glued with Kliberit-779.6 glue . Pedestal body shall be fitted to the ground with M6 levelers . Drawer- It is to be made up of 0.7mm CRCA sheet confirming to IS 513: 2008 with powder coated finish up to 50 to 60 Micron. Drawer Fascia shall be made up of 18mm thick Prelam MDF board confirming the grade SBG II of IS 12406/Latest with PVC edgebanding glued with Kliberit-779.6 glue . C type handleis to be mounted on fascia.Box drawers mounted on 27x400mm Telescopic slide with 3/4 extension and File Drawer mounted on 37x400mm Telescopic slide with full extension. Box drawer in 352x400x70mm and File drawer in 352x400x 245mm is needed alongwith provision of centralize locking for all the drawers and multi drawer lock system is required incluiding all fixtures and fastners, etc complete as per required shade and colour.

Modular Workstation 1200 mm X 600 mm with Mobile pedestal, KBPT and CPU Trolley (Table) ( 5 Seater - Size :- 6000mm (W) x 600mm (D) x 750/1050mm(H) Qty -1 2 Seater - Size :- 2400mm (W) x 600mm (D) x 750/1050mm(H) Qty - 1)

Supply, Fitting & Fixing of Non-Sharing Cluster Workstation- Work Top - Work top shall be made 25mm thick Work Top - Work top shall be made 25mm thick Prelam particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue.Table top under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. Under Structure - SPLAYED LEG conSeateructed of 40X40X1.6 mm M.S. pipe confirming IS-Grade 4932 with powder coated finish up 50 to 60 Micron. Legs shall be fitted to the ground with M8 screw leveler with the height adjustment up to 12mm to 15mm.Cross member shall be made of 40mm X 40mm X 1.6mm MS LIP Section with powder coated finish confirming to IS 4932. Cross members shall be mounted by end brackets. Cross member end bracket shall be made of 3mm thick IS 513: 2008 CRCA sheet with powder coated finish up 50 to 60 Micron. 18mm thick MAGNETIC FABRIC SCREEN- Fabric Screen shall be made of 18mm thick Particle Board with 0.35mm GI sheet and Fabric wrapped on it Screen is supported by Die-cast clamp which will be mounted on aluminum section. Complete screen periphery is covered by aluminum(6063-T6) T-bidding powder coated finished in 50 to 60 micron Wire management – Electrical wires shall be carried from Electrical leg Or Cable tray shall be made of 0.7mm CRCA sheet confirming to IS 513:2008. Access flap will be fitted on work top above to the cable tray. Access flap of length 400 mm and its components shall be made of aluminum extrusions of material AL6963-T6. incluiding all fixtures and fastners, etc complete as per required shade and colour. Table top under goes from diSeateributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. UnderStructure - SPLAYED LEG constructed of 40X40X1.6 mm M.S. pipe confirming IS-Grade 4932 with powder coated finish up 50 to 60 Micron. Legs shall be fitted to the ground with M8 screw leveler with the height adjustment up to 12mm to 15mm.Cross member shall be made of 40mm X 40mm X 1.6mm MS LIP Section with powder coated finish confirming to IS 4932. Cross members shall be mounted by end brackets. Cross member end bracket shall be made of 3mm thick IS 513: 2008 CRCA sheet with powder coated finish up 50 to 60 Micron. 18mm thick MAGNETIC FABRIC SCREEN- Fabric Screen shall be made of 18mm thick Particle Board with 0.35mm GI sheet and Fabric wrapped on it Screen is supported by Die-cast clamp which will be mounted on aluminum section. Complete screen periphery is covered by aluminum(6063-T6) T-bidding powder coated finished in 50 to 60 micron Wire management – Electrical wires shall be carried from Electrical leg Or Cable tray shall be made of 0.7mm CRCA sheet confirming to IS 513:2008. Access flap will be fitted on work top above to the cable tray. Access flap of length 400 mm and its components shall be made of aluminum extrusions of material AL6963-T6. incluiding all fixtures and fastners, etc complete as per required shade and colour.

Pedestal :- Supply, Fitting & Fixing of 3 drawer pedestal Body –Top panel , LH and RH side panel Base panel shall be made up of 18mm thick and Back panel 9 mm thick Prelam MDF board confirming the grade SBG II of IS 12406/Latest With PVC edgebanding glued with Kliberit-779.6 glue . Pedestal body shall be fitted to the ground with M6 levelers . Drawer- It is made up of 0.7mm CRCA sheet confirming to IS 513: 2008 with powder coated finish up to 50 to 60 Micron. Drawer Fascia made up of 18mm thick Prelam MDF board confirming the grade SBG II of IS 12406/Latest with PVC edgebanding glued with Kliberit-779.6 glue . C type handle is to be mounted on fascia.Box drawers mounted on 27x400mm Telescopic slide with 3/4 extension and File Drawer mounted on 37x400mm Telescopic slide with full extension. Box drawer in 352x400x70mm and File drawer in 352x400x 245mm. Provision of centralize locking for all the drawers. Multi drawer lock system is offered. incluiding all fixtures and fastners, etc complete as per required shade and colour.

Back Unit (Storage) 2200(W) X 450(D) X 2100(H)

Top- Overall thick ness of storage top is 25mm, which is made of 18mm Prelam BSL particle board confirming to IS12823: 1990 with 0.4 mm thick PVC lipping glued with Kliberit-779. Storage Body- The construction shall be aesthetically appealing completely knock down conSeateruction .side panel and back panel is made from 18 mm Prelam (OSL) particle board conforming to IS 12823:1990;. All the exposed edges are with 2mm PVC lipping& sealed edges are with 0.8mm thick PVC Lipping. Both the LH & RH side panel and back panel are to be connected with each other by using fittings such as Minifix & Dowels. Shelf can be made up of 18mm Prelam (BSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Shelf is mounted on shelf pin and self-height can be adjusted with in the limit. Prelam Shutter- The complete storage shall have two shutters of 18mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue and are to be hinged shutter with equal with hung with 0 Crank on side panel and 9.5 crank hinges on middle vertical panel. Flush type handle shall be used in both the shutter of 96mm CD(center to center distance handle hole). Black color PVC door Seaterip and multi-purpose square lock.

Mingle Modular 9 seater (Meeting Table) Size - 3000(W) X 2000(D) X 750(H)

Providing and fixing in Position Conference Table having Top made in 18+18mm thick MDF Membrane Finish with PVC Chrome Seaterip and reverse waterfall edge. Modesty made in 18mm thick PPB With PVC Edgebanding. Legs made in combination of Membrane Finish MDF and Prelam MDF with PVC Chrome Seaterip, 400mm Access Flap With Electrical Box & Vertebrae. including all fixtures and fasteners, etc complete as per required shade and colour.

Office Table + Side Storage (Table :- 1500mm (W) x 750 (D) x 750mm (H) Side St :- 900mm (W) x 450 (D) x 750mm (H))

Supply, Fitting & Fixing Work Top- Shall be made up of Work top shall be made 25mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Work top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section Under Structure- Modesty panel shall be made of 18mm thick Prelam BSL particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Gable ends shall be made of 25mm thick Prelam BSL particle board confirming to IS12823: 1990. The construction shall be aesthetically appealing completely knock down construction fitting is done by using the Minifix & Dowels. Gable end height will be 725mm and its depth varies as per the depth of work top. Standard depth of work top will be 600mm and 750mm. Wire management- Wire manager cap on the table top shall be made of ABS material having Diameter 63.5mm standard.

Modular 18 seater Meeting Table ( Size :- 6000m (W) x 1500 (D) x 750mm (H))

Seat STRUCTURE:- 72mm thick top with the provision of power dock mounting facility mounted on box type gable end of 200mm thickness and full height apron providing space for wire management within. TABLE TOP:- 72mm thick top surface of the conference table shall be the combination of different types of the top such as a stationary maintop with provision for power dock fixing, openable top with the provision of power dock placement and stationary side top. Side top and main top are to be made up of ISmm PVCfoiled MDF with three battens of same thickness fitted around the edges, from the bottom side. PVC foiling of the top is after fitment of one batten to it and rest two battens are foiled together which gives a look of two solid blocks of 36mm thickness joined togetherto form a muscular look of 72mm thickness.Side top is to be of Vermont colour and the main top are to be finished in matt black colour. Central tops with openable future are to be made up of ISmm thick PVC foiled MDF to act as horizontal box cover to access the wire management provision with piano hinges. LEGS:- 200mm thick box pattern hollow leg made up of ISmm thick PVCfoiled MDF with C shape part made by foil and fold process is to be packed with a cover panel made up of ISmm thick pre-laminated particle board. MODESTY:- Modesty shall be made up of pre-laminated ISmm MDF. Provision of support pane below the top for easy wire management across the conference table length. Provision of wooden stiffners of 101mm width and ISmm thickness made up of PPB fixed below tabletop inline with modesty panel. WIRE MANAGEMENT:- Provision for wire pasing throughout the Structure without mixing data and power connections.The wires can be pulled inside the table from floor and placed in the boxes build below openable shutter.The access point for data and power can be mount on the main top as well as the openable top.

2 Seater (Sofa) 2 Seater

Supply and placing of Sofa over all dimension for 2 Seater -1420mm length and over all height is 890 mm,over all width is 780 mm, seat height is 430 mm and seat depth is,530mm . Frame : Made up of Sturdy internal frame constructed from a combination of wood and 12 mm plywood frame . Seat & Back : The seat and backrest shall be cushioned using high-quality foam of 32 density with foam thicknes 95 mm to ensure comfort and long-lasting resilience with leatherite and fabric finish . Armrest : Made up of high quality leatherite with soft foam padding over a sturdy internal frame having thickness 175 mm,length 760 mm and height 520 mm. Leg : SS frame type leg having overall dimensions 45mmx45mmx160mm. Incluiding all fixtures and fastners, etc complete as per aproved shade and colour.

Single Bed 1050mm (W) x 2030mm (D) x 550/650mm (H)

Provinding and fixing in Position Single Metal Bed having TOP PLANK, HB & FB PLANK – Top plank shall be made of 18mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 0.5mm thick PVC lipping glued with Kliberit-779.6 glue. HB Plank : 995(W) x 225mm (H), FB Plank : 995(W) x 125mm (H) UNDER Seat STRUCTURE HEADBOARD: Is to be made up of Horizontal CR pipe 25x50x1.2mm thick with vertical outer CR pipe 25x50x1.2mm thick Conforming IS-Grade 4923. Construction shall be partially welded with MIG welding confirming to IS standard IS 816:1969 and it is to be welding also tested as per the IS grade IS 822:1970. Legs shall be fitted to the ground with M8 screw leveler with the height adjustment up to 12mm to 15mm. To connect headboard with middle frame 2mm Thick CRCA sheet bracket is to be used conforming IS 513: 2008. End to end dimensions for the Headboard is 1050(W) x 650mm (H).Head board assembly is finished with powder coated with 50 to 60 Micron. TAILBOARD - Is to be made up of Horizontal CR pipe 25x50x1.2mm thick with Vertical outer CR pipe 25x50x1.2mm thick Conforming IS-Grade 4923. Construction is to be partially welded with MIG welding confirming to IS standard IS 816:1969 and it is to be welding also tested as per the IS grade IS 822:1970. Legs shall be fitted to the ground with M8 screw leveler with the height adjustment up to 12mm to 15mm .To connect Tailboard with middle frame 2mm thick CRCA sheet bracket shall be used conforming IS 513: 2008 with powder coated finish 50 to 60 Micron. End to end dimensions for the Tailboard is 1050(W)x550mm(H). Assembly is finished with powder coated up 50 to 60 Micron

MIDDLE FRAME – Middle Frame shall be made up of Connecting CR Pipe 25x50x1.2mm thick, middle supporting pipe CR pipe 25x25x1.2mm thick conforming IS-Grade 4923 with powder coated finish 50 to 60 Micron. All pipes welded to each other by mig welding. End to end dimensions for the middle frame is 1930(L)1050mm(W) FINAL ASSEMBLY: Assembly is to be made by mounting Headboard, Tailboard, and middle frame Assly shall be connected by 4 Nos of connecting Brackets & M8x16 Allen Bolt. End to end dimensions for the bed is 2030 (L)x1050(W)x650/550mm(H) Finish - The bodies are to be given anti-rust surface treatment & are to be powder coated with NEROLAC Make. Which involves an Oxsilan pre-treatment consisting of Hot water degreasing, cold water rinse I & cold-water rinse II, iron phosphating, cold water rinse, passivation & dry off oven treatment. Final finish shall be consists of powder coating of required color & shade with a Dry Film Thickness of 50 to 60 (+\- 5) microns. The material is then oven baked with a controlled temperature of 180 deg.C to 200 deg.C. The product must be from a Manufacturer having ISO 9001,ISO 14001.45001,50001.CR Pipe used is of TATA/JINDAL Make. Powder Coating to be of Nerolac Make. Note :- Bed Total Weight - 55 to 60KG

Mattress 4" 78X36X4

Supply and installation of Mattress made in 70mm Bonded Foam + PU Foam On Top + 14mm Quilting Viscose Sating Fabric. (RESTIN BOND 4'')

Pillow L:425mm W:675mm

The pillow shall be of size 675mm (L) x 425mm (W) ±10mm, and designed to provide optimal support and comfort for sleeping. The outer fabric shall be made of high-quality, soft-touch microfiber or 100% cotton fabric, The inner filling shall comprise conjugated hollow siliconized polyester fibre (minimum 800 grams for medium firmness or 1000 grams for firm support), offering a soft yet resilient Seateructure that retains shape and loft even after prolonged use. The pillow shall have double-stitched edges to prevent fiber leakage and maintain Seateructural integrity. The product must be non-toxic, odor-free, and suitable for sensitive skin, with resistance to dust mites and allergens. It shall be machine washable or dry cleanable, as specified by the manufacturer, and quick-drying for hygienic reuse. conforming to ergonomic standards to ensure neck and spinal comfort. The finished pillow shall be free from lumps, uneven filling, or surface defects. A minimum one-year warranty shall be provided against manufacturing defects. All products shall be neatly packed in moisture-resistant packaging and supplied in clean.

Writing Pad Chair Cushion with Full Desklet & Paper Tray (Training Chair)

Providing and Fixing in Position Desklet Chair having, Polypropylene Virgin Material Comes In 9 Different Vibrant Colors Aluminium Die Casted Armrest Fixed With Pp Pad & Micron Powder Coated In Same Color As Frame Pp Half Writing Pad Supported By Aluminium Frame & Metal Pipe ,Can Flip To 90° Comes Wit Pen Slot & Tea Cup Holder Three Dimensional Frame Made Up Of 22.5 Mm Erw Tube With 2 Mm Thickness-micron Powder Coated Finish Same Color Powder Coating Matching With Seat And Back Fabricated With Ms Mesh Finished With Same Color Powder Coated As Frame, incluiding all fixtures and fastners, etc complete as per required shade and colour

Corner Table 600mm (W) x 600 (D) x 450mm (H)

Supply and installation of corner table TOP- Is to be made up of 25mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Reversed chamfering is to be done on all sides for the table and chamfered area isto be sealed by white foil. Top is to under goes from diSeateributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. UnderSeateructure- Legs vertical member areto be made up of ∅32X1.2mm thk swage pipe the confirming the IS grade IS 2385: 1977 with powder coated finish up to 50 to 60 Micron. Leg should have a length of 425mm.Horizontal member is to be supported to the vertical member. Horizontal member is to be made up of 40X20X1.2mm thk pipe confirming the IS grade IS 2385: 1977 with powder coated finish up to 50 to 60 Micron. Bracket is to be welded on horizontal member by MIG welding. Brackets should made up of 2mm thick CRCA sheet confirming to IS 513:2008, M6 Hex nuts are to be welded on bracket. Both the leg assembly is to be connected with 2 no’s cross member. Cross member should made up of 40X20X1.2mm thk pipe confirming the IS grade IS 2385: 1977 with powder coated finish up to 50 to 60 Micron. Both the cross member is to be connected with leg assembly by using M6 Allen bolt.

3 Seater (Sofa) 3 seaters

Supply and placing of Star Sofa over all dimension for 3+2 Seater -1930mm length and over all height is 890 mm,over all width is 780 mm, seat height is 430 mm and seat depth is,530mm . Frame : Made up of Sturdy internal frame should be constructed from a combination of wood and 12 mm plywood frame . Seat & Back : The seat and backrest shall be cushioned using high-quality foam of 32 density with foam thicknes 95 mm to ensure comfort and long-lasting resilience with leatherite and fabric finish . Armrest : Is to be made up of high quality leatherite with soft foam padding over a sturdy internal frame having thickness 175 mm,length 760 mm and height 520 mm. Leg : Should be SS frame type leg having overall dimensions 45mmx45mmx160mm. Incluiding all fixtures and fastners, etc complete as per required shade and colour.

Visitor Chair With Arms

Providing and Fixing in Position Low Back Fix Chair Foam Seat and Mesh Back, PP Fixed Arm, Fixed Chair With 25mm dia Pipe Frame Leg Duly Powder Coated. incluiding all fixtures and fasteners, etc complete as per required shade and colour.

MAIN TABLES with ERU attached Pedestal 2100mm (W) x 2100mm (D) x 750mm (H)

Supply and installation of Cabin Table Work Top- work top is to be made up of 18 mm thick Prelam (BSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.Table Top end to end molding in MDF board of grade SBG II of IS 12406/Latest from the table top, this batten is to be covered of table top. Table top shall under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. Under Structure- Gable ends shall be made of 25mm thick Prelam BSL particle board confirming to IS12823: 1990 with 0.4 mm thick PVC lipping glued with Kliberit-779. Modesty panel shall be made of 18mm thick Prelam BSL particle board confirming to IS 12823: 1990 with 0.4 mm thick PVC lipping glued with Kliberit-779.6 glue. The construction shall be aesthetically appealing completely knock down construction fitting is to be done by using the Minifix & Dowels. Special design aluminum Seaterip shall be grove for decorative purpose. Gable end height will be 701mm and its depth varies as per the depth of work top. Return storage Top- Overall thick ness of storage top is to be 25mm, which shall be made of 18mm Prelam BSL particle board confirming to IS12823: 1990 with 0.4 mm thick PVC lipping glued with Kliberit-779. Main Body-The construction shall be aesthetically appealing completely knock down construction .side panel and middle vertical panel is made from 18 mm Prelam (BSL) particle board conforming to IS 12823:1990;. All the exposed edges shall be with 2mm PVC lipping& sealed edges are to be with 0.4 mm thick PVC Lipping. Both the LH & RH side panel and back panel are to be connected with each other by using fittings such as Minifix & Dowels. Back Panel shall be made up of 9mm thick prelam particle board confirming to IS 12823: 1990 which slides is both side panel. Shelf can be made up of 18mm Prelam (BSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Shelf is to be mounted on shelf pin and self-height can be adjusted with in the limit. Shutter-LH and RH shutter shall be made up of 18mm Prelam (BSL) particle board conforming to IS 12823:1990 all the exposed edges are to be with 2mm PVC lipping and are to be hinged shutter with equal with hung with 0 Crank on side panel and 9.5 crank hinges on middle vertical panel.

Pedestal :- Supply, Fitting & Fixing of 3 drawer pedestal Body –Top panel , LH and RH side panel Base panel made up of 18mm thick and Back panel 9 mm thick Prelam MDF board confirming the grade SBG II of IS 12406/Latest With PVC edgebanding glued with Kliberit-779.6 glue . Pedestal body shall be fitted to the ground with M6 levelers . Drawer- It is made up of 0.7mm CRCA sheet confirming to IS 513: 2008 with powder coated finish up to 50 to 60 Micron. Drawer Fascia made up of 18mm thick Prelam MDF board confirming the grade SBG II of IS 12406/Latest with PVC edgebanding glued with Kliberit-779.6 glue . C type handle to be mounted on fascia.Box drawers mounted on 27x400mm Telescopic slide with 3/4 extension and File Drawer mounted on 37x400mm Telescopic slide with full extension. Generally 2 types of standard drawer are offered Box drawer in 352x400x70mm and File drawer in 352x400x 245mm. Provision of centralize locking for all the drawers. Multi drawer lock system is offered. incluiding all fixtures and fastners, etc complete as per required shade and colour.

Meeting Table With 3 Access Flap & Wire Management For Discussion Area 3600mm (W) x 1200 (D) x 750mm (H)

Supply, Fitting & Fixing of Conference Table - Work Top - Work top shall be made 25mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Table top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. Understructure - LEG constructed of 40X40X1.6 mm M.S. pipe confirming IS-Grade 4932 with powder coated finish up 50 to 60 Micron. Legs shall be fitted to the ground with M8 screw leveler with the height adjustment up to 12mm to 15mm.Cross member shall be made of 40mm X 40mm X 1.6mm MS LIP Section with powder coated finish confirming to IS 4932. Cross members shall be mounted by end brackets. Cross member end bracket shall be made of 3mm thick IS 513: 2008 CRCA sheet with powder coated finish up 50 to 60 Micron. Wire management – Electrical wires shall be carried from 100x100mm vertical duct, vertical duct shall be made of 0.7mm CRCA sheet confirming to IS 513:2008. Cable tray shall be made of 0.7mm CRCA sheet confirming to IS 513:2008. cable tray for mounting electrical standard switch plate. Switch Plate shall be made up of 1.5mm CRCA sheet confirming to IS 513:2008 and cable tray by using 8x15 mm Pan Head ST Screw. Access flap will be fitted on work top above to the cable tray. Access flap and its components shall be made of aluminum extrusions of material.

Modular Workstation Wish with Mobile pedestal, KBPT and CPU Trolley (Table) (2 Seater Qty 1 Size :- 2400mm (W) x 600mm (D) x 750/1200mm(H) 1 Seater - :- 1200mm (W) x 600mm (D) x 750/1200mm(H) )

Supply, Fitting & Fixing of Non-Sharing Cluster Workstation- Work Top - Work top shall be made 25mm thick Work Top - Work top shall be made 25mm thick Prelam particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue.Table top under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. UnderSeateructure - SPLAYED LEG constructed of 40X40X1.6 mm M.S. pipe confirming IS-Grade 4932 with powder coated finish up 50 to 60 Micron. Legs shall be fitted to the ground with M8 screw leveler with the height adjustment up to 12mm to 15mm.Cross member shall be made of 40mm X 40mm X 1.6mm MS LIP Section with powder coated finish confirming to IS 4932. Cross members shall be mounted by end brackets. Cross member end bracket shall be made of 3mm thick IS 513: 2008 CRCA sheet with powder coated finish up 50 to 60 Micron. 18mm thick MAGNETIC FABRIC SCREEN- Fabric Screen shall be made of 18mm thick Particle Board with 0.35mm GI sheet and Fabric wrapped on it Screen is supported by Die-cast clamp which will be mounted on aluminum section. Complete screen periphery is covered by aluminum(6063-T6) T-bidding powder coated finished in 50 to 60 micron Wire management – Electrical wires shall be carried from Electrical leg Or Cable tray shall be made of 0.7mm CRCA sheet confirming to IS 513:2008. Access flap will be fitted on work top above to the cable tray. Access flap of length 400 mm and its components shall be made of aluminum extrusions of material AL6963-T6. incluiding all fixtures and fastners, etc complete as per required shade and colour. Table top under shall be goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. Under Seat structure - SPLAYED LEG constructed of 40X40X1.6 mm M.S. pipe confirming IS-Grade 4932 with powder coated finish up 50 to 60 Micron. Legs shall be fitted to the ground with M8 screw leveler with the height adjustment up to 12mm to 15mm.Cross member shall be made of 40mm X 40mm X 1.6mm MS LIP Section with powder coated finish confirming to IS 4932. Cross members shall be mounted by end brackets. Cross member end bracket shall be made of 3mm thick IS 513: 2008 CRCA sheet with powder coated finish up 50 to 60 Micron. 18mm thick MAGNETIC FABRIC SCREEN- Fabric Screen shall be made of 18mm thick Particle Board with 0.35mm GI sheet and Fabric wrapped on it Screen is supported by Die-cast clamp which will be mounted on aluminum section. Complete screen periphery is to be covered by aluminum(6063-T6) T-bidding powder coated finished in 50 to 60 micron Wire management – Electrical wires shall be carried from Electrical leg Or Cable tray shall be made of 0.7mm CRCA sheet confirming to IS 513:2008. Access flap will be fitted on work top above to the cable tray. Access flap of length 400 mm and its components shall be made of aluminum extrusions of material AL6963-T6. incluiding all fixtures and fastners, etc complete as per required shade and colour.

Mid Ht Storage 900mm (W) x 450mm (D) x 1200mm (H)

Top- Overall thick ness of storage top is 25mm, which is made of 18mm Prelam BSL particle board confirming to IS12823: 1990 with 0.4 mm thick PVC lipping glued with Kliberit-779. Storage Body- The construction shall be aesthetically appealing completely knock down construction .side panel and back panel is to be made from 18 mm Prelam (OSL) particle board conforming to IS 12823:1990;. All the exposed edges are to be with 2mm PVC lipping& sealed edges are to be with 0.8mm thick PVC Lipping. Both the LH & RH side panel and back panel are to be connected with each other by using fittings such as Minifix & Dowels. Shelf can be made up of 18mm Prelam (BSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Shelf is to be mounted on shelf pin and self-height can be adjusted with in the limit. Prelam Shutter- The complete storage shall have two shutters of 18mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue and are to be hinged shutter with equal with hung with 0 Crank on side panel and 9.5 crank hinges on middle vertical panel. Flush type handle is to be used in both the shutter of 96mm CD(center to center distance handle hole). Black color PVC door Seaterip and multi-purpose square lock.

Bonton Technomake Pvt Ltd (BID ID -3107119)