Construction of Vyayamshala At - Gharagaon In V.P. Land Tal - Karmala Dist.- Solapur.

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stackingand spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.)

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed,dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m)

Providing and laying in situ, cement concrete in M-10 of trap/granite/quartzite/gneiss metal for foundation and bedding including bailing out water, formwork, compacting and curing complete. With fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer, With natural sand

Providing & laying in situ cement concrete M 20 of trap/granite/quartzite/gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, cover blocks compaction and curing roughing the surface if special finish is to be provided ( Excluding reinforcement & structural steel) complete with fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.

Providing and casting in situ cement concrete M 20 of trap/granite/quartzite/gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, compacting and roughening the surface if special finish is to be provided and curing complete. ( Excluding reinforcement & structural steel) complete with fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand. GROUND FLOOR

.Providing & casting in situ cement concrete M 20 of trap/granite/quartzite/gneiss metal for R.C.C. beams and lintels as per detailed designs & drawings or as directed including centering, form work, compaction & roughening the surface if special finish is to be provided & curing complete. ( Excluding reinforcement & structural steel) complete with fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering,formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial San

Providing and casting in situ / Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer / concrete Batch mix plant (Pan mixer) etc. complete.With fine aggrigate ( Natural sand / Crushed Sand VSI Grade finally washed etc ) SSR Pg No./It No.236/777/25.70/BDF8 Spec. No. :Bd.F.8 Page No. 302 and B-7, Page No.38

Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/in plinth external walls including bailing out water, striking joints on unexposed faces, racking out joints on exposed faces and watering, Complete.

Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams, columns, canopies, staircase, newels, chajjas, lintels, pardis, copings, fins, arches etc. as per detailed desings, drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. SSR Pg No./It No. 245/797/26.33/BDF17 Spec. No. : Bd.F.17, Page No. 306

Filling in plinth and floors with approved excavated materials in 15 cm to 20 cm layers including watering and compaction complete. SSR Pg No./It SSR P.No- 201/21.36 Spec No- Bd A 10 P.No-262

Filling in plinth and floors with contractor’s material / brought from out side and approved by engineer incharge in layer of 15 cm to 20 cm including watering and compaction. Etc complete. SSR Pg No./It No.201/680/21.37/BDA11 Spec. No. Bd. A 11 Page No. 263

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete

Providing internal cement plaster 12 mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing complete. SSR Pg No./It No. 268/885/32.04/BDL2B Spec. No. : Bd.L.2 Page No. 368

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. SSR Pg No./It No. 269/891/32.11/BDL7 Spec. No. : Bd.L.7 Page No. 369

Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete.

Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coatsincluding scaffolding, preparing the surface. (excluding the primer coat)etc. complete.

Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if ecessary, and watering the surface for two days etc complete. NOTE: For Item No. 15 to 18 prior approval of Superintending Engineer will be necessary

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White/ Catbary brown /RBIred /Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.

Providing and laying telephone black /Amba White /Cadbury brown/ Rubyred /Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc.OnC.M.1:6 including filling joints with polymer base filler nosing/ moulding the sharp edges wherever necessary, curing, etc. complete.

Providing and fixing frame with / withou tventilatr of size as specified with Country cut tea kwood for doors and windows including chamfering, rounding,rebating,iron hold fast of size 300 mm x 40mm x 5mm with oil painting, etc. complete

Providing and fixing Country cut teak wood double or single leaf second class fully panelled door shutter with 35 mm thick style and rail with 25 mm thick panels with openable fan light as per detailed drawings. Excluding the door frame 60mm x 100 mm stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats.(Excludingthedoorframe)

Providing and fixing in position anodised (as per I.S.1868/1982) alluminum sliding window of three tracks with regular pipe 95x38.10x0.90mm at weight 0.637 Kg/Rmt. and window frame bottom tracksection 92x31.75x1.30mm at weight 1.070 Kg/Rmt. Top and side track section 92x31.75x1.30mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40x18x1.25mm at weight0.417 kg/Rmt.I nter locking section 40x18x1.25mm at weight 0.469 Kg/Rmt and top section 40x18x1.25mmat weight 0.417 kg/Rmt.as per detailed drawing and as directed by Engineer.in Charge with all necessary aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shytter including 5mm thick plain glass with all required screws and nuts etc.complete.

Providing And fixing mild steel grill work for window, ventilators etc.15 kg/ Sqm as per drawing including fixturs necessary welding and painting with one coats of anticorrosive paint & two coat of oil painting complete

Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to10 mm thickness and confirming IS.15622-2006 (GroupBla) of approved make,shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float,filling joints,curing and cleaning etc.complete.

Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to10 mm thickness and confirming IS.15622-2006 (GroupBla) of approved make,shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float ,filling joints,curing and cleaning etc.complete.

Painting letters upto 20 cm height complete brushes, coir brushers, dusting, cleaning, including cost of paint etc. complete.

Quality Control Charges

Add Royalty Charges Of Sand

Add Royalty Charges Of Hard Murum

Add 18 % G S T On Materials

Please Enable Macros to View BoQ information