Providing office facilities and renovation of office for the Chief Engineer and Regional officer MoRTH Bengaluru at 2nd floor Karnataka State Cooperative

Amount

Provinding and constructing non load bearing wall with Light Weight Concrete (Autoclaved areated concrete) Blocks confirming to IS:2185 (part-3) 1984 and IS 6441-1972 of compressive strength of 3.0N/sq mm with a thin layer of polymer based jointing solvent for super structure with neccesary scaffolding, curing including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work - with 600x200x150mm size Blocks

Providing and constructing non-load bearing wall with cement concrete solid blocks with compressive strength not less than 3.5 Newton per sqmm with cement mortar 1:4 ( Jamb, closer blocks ) with blocks of size 40x10x20cms. (lxbxh) conforming to I.S : 2185/1965 in superstructure including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Providing 15mm thick cement plaster in single coat with cement mortar 1:4, to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, Providing lime rendering for plastering to wall and ceiling, including cost of materials, labour, curing complete as per specifications. including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Dismantling the tile work in floor and roof laid in cement or surki mortar including stacking the materials including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Loading and Unloading of Stone Boulder / Stone aggregates /Sand/ Kanker / Moorum. Placing tipper at loading point, loading with front end loader,including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work Case-I : Surface Road

Waterproofing of RCC Terrace / podium slab / toilet / utilities / water retaining structure by preparing the surface by chipping and cleaning and Grouting of Honey comb, voids,cracks / construction joints with cement slurry (1kg cement added in 10 ltr of water) added with 100gm of inorganic accelerator, followed by spraying of liquid biological modified alkaline earth silicates @ 0.40 ltr per sqm on whole surface to reduce the micro porosity and allowing it to dry, curing the surface for the silicates to penetrate deeper into the concrete and spraying waterproofing impregnate liquid containing silane and silanol linear copolymer @ 0.50 ltr per sqm and finally applying polymer slurry made out of cross linked acrylic / styrene / butadiene & cement in the ratio of 1:0.1, @0.50kg/sqm on the whole surface,including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Providing skirting, dado, rises of steps with colour glazed tiles on 10mm thick cement plaster 1:3 and jointed with white cement slurry over rough plaster surface ( existing) using glazed tiles of approved make and size i- Colour glazed tiles 30x60 cms 6mm thick with border of size 30 x 10 cms. including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Providing Ceramic tiles of approved make,shade and size for flooring, treads of steps and landings laid on a bed of 12mm thick, cement mortar 1:3 mix, flush pointing with white cement using colour pigment , - for Ceramic Tiles of size 30x30cms 6mm thick including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including all lead and lift loading and unloading chargres , Cost of material & labour charges and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Providing and laying in position plain cement concrete of mix 1:2:4 with cement @ 240kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.69 cum and fine aggregtes @ 0.459cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, plinth and cills, including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Providing and fixing factory made single leaft rigid GRP Sandwich composite door shutter of 32mm thick, laminated with two GRP skins with wood grain finish, fabricated using U.V-stabilized Isopthalic Gelcoat and on layer of 45 gsm E-Glass Chopped strand Mat (CSM), impregnated with orthopthalic polyster resin. The thickness of the skins shall not be less than 1.5mm. Expanded Polystyrene (EPS) structural foam panel of 29mm thickness and a density of 20 Kg/m3 shall be used as core material. Wooden reinforcements made of Seasoned Salwood block of cross section not less than 28mmx32mm and also necessary salwood reinforcements for fixing the metal fittings such as tower bolts, aldrops, handles, etc, shall be provided. A structural adhesive compatible with EPS foam shall be used for bonding the core material, the Salwood reinforcement and the skins. The material and process for manufacturing the door shutters shall confirm to RV/TIFAC Composites Design centre Standards and specifications and the door shutters tested in confiramation to IS 4020-1994. The finish of shutter will be plain colour White/Ivory/Beige/Light Grey or any other colour using high quality pigments. Exclusing cost of fixtures and inclusive of supply of shutters to respective work spot.including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Providing and fixing 65mmx90mm GRP Doorframe fabricated using E-Glass Chopped Strand Mat (CSM). U.V-stabilized Isopthalic Gelcoat and Isopthalic resin. The thickness of the GRP skin shall not be less than 2.0 mm. The doorframe consists of four segmens, which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screws. The GRP frame shall be provided with wooden reinforcement of 6 locations fro high screw holding capacity for fixing metallic hold fast and shall be consolidated by filling with medium density foam/Plaster with fibre reinforcement. Six Numbers of 260mmx25mmx5mm size S shaped M.S. flat hold fast shall be provided with the frame including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of joints complete. (internal work exposed on wall) 25mm nominal OD pipesincluding cost of all materials, labour, loading, unloading, lead, lift, transporting with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work.

Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of joints complete. (Concealed work including cutting chases and good the walls etc.) 20mm nominal OD pipes including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Providing and Fixing Stainless Steel sink of sizes upto 40cmsx47cms in 20mm thick granite slab of by cutting required thickness and width of grooves and fixing using adhesives etc., + Cutting granite slab upto 40mm thick and required width of grooves for fixing Stainless steel sink above 60cm x 45 cms and fixing using adhesives , scaffolding, curing, including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Providing and fixing to wall, ceiling and floor high density polyethylene pipes 6.00 kgf/sq.cm working pressure 75mm outside diameter, raising mains& exposed distribution pipes with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor, Providing lime rendering for plastering to wall and ceiling, including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Providing and fixing to wall, ceiling and floor high density polyethylene pipes 6.00 kgf/sq.cm working pressure 110mm outside diameter, raising mains & exposed distribution pipes with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM of equipments and testingincluding cost of all materials, labour, with all lead and lift, hire charges of machineries with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work.

Providing 2 legged scaffolding using 10-15 cms. dia best quality casurina poles of 4m over all length (3m +0.5m projection + 0.5m In to the ground), the distance between two rows being 1.25m and spacing of posts being 2m in both rows with 2 horizontal posts with 0.5 mm overlap on either side and braces at 2 m c to c including longitudinal and transveres middle braces to step up and providing platform with casurina poles, forms tied up using coir rope Scaffolding work converted including cost of all materials, labour, lead and lift, hire charges of machineries etc., including all other incidental charges and as per the direction of the Engineer-In-Charge of work for successful completion of work .

Providing and fixing CI Nahani trap of approved make conforming to ISI specifications and construction of Cistern in M-15 as per directions (Rate is inclusive of cost of materials and fixtures and conveyance of materials to work spot) - 12.5cms x 7.5cms. including cost of all materials, labour, loading, unloading, lead, lift, transporting with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work.

Supplying and fixing 15mm dia CP Two in one bib cock cat No.FLR 5041 heavy cast Jaguar make of approved quality including necessary threads white lead including cost of all materials, labour, loading, unloading, lead, lift, transporting with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work.

Supplying and fixing Pillar Cock of jaquar make florentine FLR 5021N including necessary, screws, accessories etc. including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Providing and fixing "Jaguar" or equivalent make, Kubix-F series, Angle cock with flanges, CAT No. KUB 35053 F including necessary thread, white lead, tapes etc. including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Providing and fixing Towel rack 600mm long with towel hangers ACN-1181N jaguar make continental series as approved including cost of all materials, labour, HOM of machinery, curing including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Providing and fixing Toilet Paper Holder Recessed Type (Stainless Steel) AKP-CHR-35753P jaguar make KUBIX series as approved including cost of all materials, labour, with all lead and lift, hire charges of machineries with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work.

Supplying and fixing European Closet Starwhite size 69x36x74 cm Hindware or equivalent make of approved make including cost of all materials, labour, lead and lift, hire charges of machineries etc., including all other incidental charges and as per the direction of the Engineer-In-Charge of work for successful completion of work .

Supplying and fixing Wash Basin Starwhite Cat. No:10082 with full pedestals size 64x51cm Hindware or Equivalent make as approved including cost of all materials, labour, loading, unloading, lead, lift, transporting with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work.

Supplying and fixing Health Faucet with 8mm Dia, 1.00m long flexible tube and wall hook with N.R.V (Back flow preventer) of jaquar make Allied series ALD 577 including necessary, screws, accessories etc., complete including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying and fixing Soap Dish of Jaguar make Queens Series AQN 7731 including necessary T.W. guttas, nails, C.P. screws etc including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying and fixing Single Towel Rail 300mm long of Jaguar make Queens Series AQN 7711B including necessary T.W. guttas, nails, C.P. screws etc.including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying and fixing Double coat Hook, Jaguar make, Queen's series AQN-7761 including necessary Threads, white lead, washers etc including cost of all materials, labour, with all lead and lift, hire charges of machineries with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work.

Supplying and fixing Towel Ring Round of Jaguar make Queens Series AQN 7721 including necessary T.W. guttas, nails, C.P. screws etc. including cost of all materials, labour, lead and lift, hire charges of machineries etc., including all other incidental charges and as per the direction of the Engineer-In-Charge of work for successful completion of work .

Supplying and fixing 8mm thick Belgium mirror of size 1220x570mm with 12mm thick kit plywood sheet back, rounding of the corners, grinding edge polishing, the mirror is fixed kit ply using mirror screws and kit ply is fixed to the wall using 50mm long fastener screws including cost of all materials, labour, loading, unloading, lead, lift, transporting with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work.

Providing and fixing 7.5 cms to 15.00 cms dia NP grating 100 mm dia including cost of all materials, labour, loading, unloading, lead, lift, transporting with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work. Single row for one utility Service

Providing and fixing gun metal wheel valve conforming to IS specification of approved make as per directions including all lead and lift etc., complete.- for 20mm dia including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Providing and fixing white vitreous china clay, water closet Orissa pattern of size 580 x 440mm with integral type footrests, 100mm S or P trap, 10 litre low level, P.V.C flushing cistern ( all are approved make ) with fittings, C.I / M.S brackets, 32mm diameter flush pipe fittings and clamps, overflow arrangements with special and 25mm mosquito proof coupling of approved design, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Providing and fixing white vitreous china clay, wall corner type, lipped front urinal basin of size 340x410x265mm with 5 litres P.V.C automatic flushing cistern, C.I / M.S brackets, standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete painting of fittings and brackets, cutting and making good the wall and floor wherever required including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Providing and fixing white vitreous china clay, flat back, lipped front urinal basin of 430x260x350mm in the range of two 7.5 litre P.V.C with automatic flushing cistern, C.I / M.S brackets, standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps painting of fittings and brackets, cutting and making good the wall and floor wherever requiredincluding cost of all materials, labour, with all lead and lift, hire charges of machineries with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work.

Providing and fixing white vitreous china clay, flat back wash basin size 630x450mm with a pair of 15mm C.P brass pillar taps with C.I / M.S brackets, 32 mm C.P. brass waste of standard pattern, painting of fittings and brackets, cutting and making good the wall and floor wherever required including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Providing pedestal for wash basin of approved 1st quality and make conforming to ISI Specifications and fixing for low down cistern as directed .Rate includes conveyance to work spot including cost of all materials, labour, loading, unloading, lead, lift, transporting with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work.

Providing and fixing 1500x450mm dia rectangular shape mirror with plastic moulded frame of approved make and shade with 6mm thick hard board backing including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Providing and fixing C.P. brass towel rail 600 mm length, 20mm dia with C.P brackets, fixed to wooden cleats with C.P. brass screws including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Providing and fixing "Jaguar" make, Allied series, Bottle Trap (with internal partition) 32mm size with 300mm & 190mm long connection pipes & wall flanges, ALD-769L including necessary thread, white lead, tapes etc including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Providing and laying plat form using prepolished, water cut / gang saw 40mm thick telephonic Black Granite. laid on existing vertical -supports and fixing in CM 1:3 proportion. Including cutting to required shape, pattern with paper joints, including full rounding for nosing, finished with cement mortar, pointed with colour pigments to match the colour of slab making through jointing with sealant, making holes 25mm x 12mm grooves in joints including curing including cost of all materials, labour, with all lead and lift, hire charges of machineries with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work.

Supplying and fixing Sink Cock (Table Mounted) with Angular Knob of jaquar make Solo series SOL-6359 including necessary, screws, accessories etc including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Providing, fabricating and fixing partition frame work consisting of 50mm x 50mm sal wood frame work at spacing not exceeding 600mm c/c fixed to the bottom and ceiling, the partition shall be skinned on both sides using 12mm thick commercial plywood of approved brand termite and water resistance, and top covered with 4mm thick approved quality veneer finished with melamine polish, complete including cost of all materials, labour, loading, unloading, lead, lift, transporting with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work.

Providing, fabricating, assembling and fixing in position aluminium partitions using sections in combination of plain, single grove and double grove as per requirements for the frames of overall size 101.6mm x 44.45mm, 3.18mm.thick having section weight, plain sections 2.40kg/m single grove section 2.541kg/m. and double grovesection 2.683 kg/m and bottom 46 kg/m; aluminium louvres of size 77.6mmx27.6mm 1.7mm. thick section weight 0.483kg/m; bottom portions provided with 12mm. thick prelaminated sheet both side of approved colour lamination exterior grade; aluminium sections of mat finish or glossy finish using section, spacing of vertical member shall not exceed 0.6 m. c to c; sections are cut to the required lengths, joints mitered and corners grinded subdividing frames tennoned and rivetted to the frames, the assembled frame should be stiffened with corner angles stripped and fixed with screws, rawl plugs and teak wood gutties to R.C.C.columns or masonry on sides, R.C.C. lintels or beams at top and floor at bottom, including cutting chistling and making good with cement mortar to match the surface, providing and fixing bottom panel filled with the materials to a height of 0.9m. from floor level; and 5.5mm. thick plain glass for middle portion viz., 0.9m. to 2.13 m. and top panel with lower sections, the glass and panels fitted with glazing clips of 19mmx17.3mm. with thickness of 0.9mm. weight 0.124kg/m; aluminium sections including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Providing and fixing veneer paneling over the 50mm x 35mm sal wood frame work at spacing not ecceding 600mm c/c and top covered out of 4mm thick approved quality veneer fixed over 12mm ply finished in mealamme polish,including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Providing and fixing storage unit of made out of 19mm thick commercial ply vertical support finished in approved 1.00mm laminate with 12mm thick ply packing internally finished with 8mm Laminate of approved colour and shade shelves shall be formed out of 19mm ply finished with 0.8mm Laminate of approved shade and colour and 19mm thick shutters formed out of 19mm thick ply finished with 1.00mm thick laminate of approved shade and colour etc including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

False ceiling Suspension system False ceiling (Tiles, Panels) shall be suspended with the frame work and Accessories complete from roof slabs, beams etc., by means of 4mm dia galvanized rods, spring steel clips, hanger, Tee Runner, Ultra Look Tee Runner and edge trim etc., The Suspnsion system consists of Grip bolt of size 50mm in length and dia of 9.5mm with 16mm long treads for fixing 9.2mm dia Nut, the thickness of the nut is 5.2mm, this is also fixed with washer of 18.50mm in dia and the thickness of the washer is 0.80mm, this grip bolt in fixed on to the RCC slab, by making holes with special hammering machine and with the help of nut and washer, dip Galvanized Iron Rod of 4mm dia is rounded, then it is been twisted, so that it with-rest above the washer and later on the nut is been tightened and the grip bolt expands inside the RCC slab and holds the G.I.Rod 4mm thick straight, this G.I. supporting rod of 4mm thick is also twisted on the other side of fixed “J” bolt, this “J” bolt consists of 3mm thick with a length of 133mm, this “J” bolt is later on twisted by 26mm, this “J” bolt has a treaded portion of 47mm and this is provided with a nut of 3.63 mm thick and the dia of the nut is 6.9mm, this nut has a washer and this washer has a dia of 19mm and the thickness of 0.6mm and all this components are chromodised, later on G.I.supporting rod of 4mm thick dia is twisted and fixed inside the nut and washer, then to maintain a good, straight level of the false ceiling, the nut in “J” bolt is then moved up or down for proper level. The Galvanized Iron 4 mm dia been cut to size of length required as per site requirement. The pre-coated parametrical channel of 24mmx24mm, is been fixed on to the wall at a prefect wall level and this pre-coated wall channel are having two coats of primer and one coat of polyester paint of desired colour, the wall channel will have a coat of primer applied on the rear side. This wall channel are made of galvanized Iron and the grade of the galvanized Iron is as per BIS.This wall channel of 24mmx24mm is fixed on to the wall side with the help of star screws, the star screws are having a length of 25mm and a dia reducing basics of 3mm to tapered down. The main “T” consists of size: 24mm width x 38mm height, this main “T” is been made of galvanized Iron sheet of 0.3mm thick, this are formed in the shape of a main”T” Bar on a fully automatic advance computer machine, the galvanized iron sheet are later on capped with pre-coated aluminium capping will have the colour, same as the panels colour or any other colour of choice. The grade of Galvanized iron sheet in as per BIS and the grade of aluminium chapping is (Al-Mn) 3003 of H-46 to 48 including necessary thread, white lead, tapes etc. including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Providing and fixing Gypsum board false ceiling of thickness 12.50mm connecting to G.I. perimeter channel allround the perimeter of the false ceiling and intermediate channel is provided as main channel at every 1229mm c/c and is supported from RCC slab by means of expansion bolts fixed with rawl plug after drilling in RCC slabs, soffit, cleat and ceiling angle. The ceiling angle is connected to soffit cleat and intermediate channel by means of bolt and nut, Mf ceiling section MF.5 is provided below intermediate channel perpendicular to it at every 457mm c/c. The ceiling section and intermediate channel to be connected to each other by means of connecting clip. After the frame work is ready 12.5mm gypsum board is cut to the required size and fixed with 25mm long dry wall screws. The joints of boards are to be filled with jointing compound and the paper tape is pasted on the joints. Another two coats of jointing compound is applied and to the level of the board. Finally two coats of top coat primer is applied including cost of all materials, labour, HOM of machinery, curing including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Providing and fixing ornamental cornice made out of plaster of paris of 125 MM”to be neatly fixed on the wall with necessary patty works to the joint including cost of all materials, labour, with all lead and lift, hire charges of machineries with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work.

Providing, fabricating, assembling and fixing in position aluminium doors using following aluminium mat finish or glossy finish, outer frame plain section 101.6x44.45mm thickness 3.18mm, section weight 2.404 kg/m, door shutters vertical section 44.62x44.45mm thickness 3.18mm, section weight 1.505kg/m, top section 47.62x44.45mm thickness 3.00mm, section weight 1.426kg/m bottom section 114.3x44.45 thickness 3.18mm, section weight 2.646kg/m, door central section 49.91x44.45mm thickness 3.00mm, section weight 1.495 kg/m glazing clips 19x17.3x11mm thickness 0.9mm section weight 0.124kg/m; aluminium sections cut to length joint metred cornersgrinded, the shutters pivoted opening arrangement with heavy duty aluminium alloy automatic door closures floor mounted, providing and fixing standard approved accessories, such as aluminium handle for full width or length, tower bolts, lock, pivots: P.V.C. or rubber gasket with 5.5m. thick plain glass for top and bottom panel; aluminium sections treated for removal of any rust and prevention of further rust formation, and coated with greasy materials for non-adherance of mortars or any other sticky materials; the assembled frame fitted with the corner angles, strips and fitted with screws, rawl plugs or teakwood gutties to R.C.C. columns ncluding cost of all materials, labour, with all lead and lift, hire charges of machineries with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work.

Opening size 900mm X 2100mm :fabricating and fixing single leaf single swing flush shutter of 35mm thick approved flush board, finished with approved, 4mm thick veneer on the both sides neatly polished with melamine . Hardware of ozone make :One set SS mortise handle with lock ,one number concealed door closure ,4numbers bearing hings . Floor mounted SS door stopper of approved make Frame: Frame of size mentioned above to be formed out of 60mmx 85mm steam beech wood timber with 35mm wide X12mm deep rebate melamine polished of approved make and colour : fixing of the frame :the door frame should fixed to the partition with 75mm flat head wooden screws from behind or the frame is fixed to the masonary wall using using M.S. hold fast with clear anti termite treatment for the concealed partition of the frame including cost of all materials, labour, loading, unloading, lead, lift, other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work.

Providing and fixing STRAIGHT WORKSTATION (Frame) consisting of back to back unit made out of 75mm thick MS CRCA powder coated tile based system for main and return spine, Top tile finish 8mm thick MDF covered with Fabric of approved colour and one writing board (600 mm w) and one soft board (600mm w) per workstation, Bottom tile finish 9mm thick Laminate tile of approved colour, Raceway-one middle raceway (600mmW) below table top per workstation and continuous raceway at the skirting level, Wire manager-ABS plastic grommet one number per table, Table top - 25mm thick PLPB with straight table top End Table 25mm thick PLPB with straightedge bound Hardware-MS powder coated corner bkt, cantilever bkt, seperator hook on bkt, L bkt and Table joint plate, as per specifications, drawings and as directed by Engineer in charge. Sharing workstation- Non Sharing workstation 2c) Size : 1200mm W x 600mm D x 1200 mm ht (Sharing-Postformed table top) including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

FREE STANDING TABLE FOR CABIN - WITHOUT FRAMES Providing and fixing Free Standing Table for Cabin- without frames consisting of 25 mm thick PLPB table top , 25 mm thick PLPB with edge bomded End table,18 mm thick PLPB with edge bonded Modesty, Wire manager -ABS plastic grommet one number per table Hardware-Minifix assembly and screw leg., as per specifications, drawings and as directed by Engineer in charge Main Table : 1500 mmW x 750mm D x 750 mm ht (Edgebinding table top) Side Table : 900 mm W x 450mm D X 750 mm ht including removal and disposal of top organic soil including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Mobile pedestal unit - WOODEN Providing and fixing (450 mm w X 450 mm d X 685 mm ht) Mobile pedestal unit-WOODEN with 18mm thick PLPB with edge bonded for body, Two equal drawer and filing drawer with centralized locking system, Telescopic channels, castors, Handles and lock etc including cost of all materials, labour, with all lead and lift, hire charges of machineries with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work.

Conference Table - wooden Table made out of 19mm thick ply wood for top and structure and edge finished with 40mm thickness and top covered with 4mm veneer for the entire exposed area. All the edges to be finished using steam beach timber required shape and size . The veneer and beading to be neatly melamine polished after neat sanding and sealer coat including cost of all materials, labour, lead and lift, hire charges of machineries etc., including all other incidental charges and as per the direction of the Engineer-In-Charge of work for successful completion of work .

Supplying of Clement/1 single seater sofa of Durain or equivalent make with arm rest made up of hard wood frame works of size 100 x 38 x 75 x 35m along with good quality ISI grade 10mm plywood boxing / covering for sides vertical support. Fixing of 12mm thick good quality plywood for the rare side. Provision of 100mm thick 100mm thick ISI grade approved quality foam rubbere for seats & 75mm thick foam rubber for the back rest. Covering / fixing of approved colour cloth on the entire sofa , lining, stiching , piping etc including cost of all materials, labour, lead and lift, hire charges of machineries etc., including all other incidental charges and as per the direction of the Engineer-In-Charge of work for successful completion of work .

Supplying of Clement/2 two seater sofa of Durain or equivalent make with arm rest made up of hard wood frame works of size 100 x 38 x 75 x 35m along with good quality ISI grade 10mm plywood boxing / covering for sides vertical support. Fixing of 12mm thick good quality plywood for the rare side. Provision of 100mm thick 100mm thick ISI grade approved quality foam rubbere for seats & 75mm thick foam rubber for the back rest. Covering / fixing of approved colour cloth on the entire sofa , lining, stiching , piping etc including cost of all materials, labour, lead and lift, hire charges of machineries etc., including all other incidental charges and as per the direction of the Engineer-In-Charge of work for successful completion of work .

Supplying of Clement/3 three seater sofa of Durain or equivalent make with arm rest made up of hard wood frame works of size 100 x 38 x 75 x 35m along with good quality ISI grade 10mm plywood boxing / covering for sides vertical support. Fixing of 12mm thick good quality plywood for the rare side. Provision of 100mm thick 100mm thick ISI grade approved quality foam rubbere for seats & 75mm thick foam rubber for the back rest. Covering / fixing of approved colour cloth on the entire sofa , lining, stiching , piping etc including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Providing and fixing of corner table of size 600 x 600mm square shape made out of good quality Burma teak wood legs of cross section 50 x 100mm and side bars of 50 x 60mm with 12mm thick modi glass top with edge grinding and polishing of 600 x 600mm ,polished with melamine finish in spray with necessery compressor etc including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Providing and fixing of Center table of size 900 x 600mm oval/ rectangular shape made out of good quality Burma teak wood legs of cross section 50 x 100mm and side bars of 50 x 60mm with 12mm thick modi glass top with edge grinding and polishing of Oval shape 900 x 600mm ,polished with melamine finish in spray with necessery compressor etc including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying and fixing High back Mesh Chair with kneetilt multi lock mechanism, with two way adjustment arms, Fine tuning adjustment. Lumbar support, Head rest, Alluminium back & Nylon Base of approved make including cost of all materials, labour, with all lead and lift, hire charges of machineries with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work.

Providing and supplying of Executive high back chair of approved make , mesh & fabrics,height adjustment with chrome steel base along with twin castor wheel gas lift made up of MDI,with 3 way adjustable arm rest along with headrest having forward, backward & height adjustment etc including cost of all materials, labour, lead and lift, hire charges of machineries etc., excepted lead for cement (Compacted thickness) including all other incidental charges and as per the direction of the Engineer-In-Charge of work for successful completion of work .

Providing & supplying of LB visitor chair of approved make including cost of all materials, labour, loading, unloading, lead, lift, transporting with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work.

Providing and fixing 100mm wide venitian blinds of window fashion fabric of Taiwan make, with 50mm thick powder coated channel with balance, imported, acrylic self alignable mechanism and equally placed spacers, imported tilting mechanism for easy tilting operation,with nylon imported thread and beadings, 100mm wide imported washable reusable fabric placed with top hanger and bottom with 100mm long bottom plate connected to nylon imported bottom link chain. The rate is inclusive of drilling holes for fixing channels to the wall, fixing threads and beadings and link chains, hard ware fixtures etc including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Providing and fixing in position aluminium windows and ventilators as per approved drawings with sliding shutters using double track window frame section of size 61.85x31.75mm. with 1.2mm thick, bottom section weight 0.695 kg/m, sides and top sections 1.3 mm. thick weight 0.659 kg/m; and shutter comprising top and bottom section of size 40mmx18mm, 1.25mm thick 0.417 kg./m; shutter outer side 40mmx18mm, 1.25mm.thick weight 0.417 kg/m, shutter interlock section 40mmx26.7mm, 1.1mm thick, weight 0.469 kg/m. the shutters mounted on nylon rollers with approved quality of fixtures such as aluminium handles tower bolts etc.; and providing and fixing 5.5mm. thick plain glass for shutters fitted with rubber beading aluminium sections including cutting to required length, joints mitred subdividing the frame tenonned and rivetted in the assembled frame stiffened with end clips at corners angles etc., and fixed to the walls, lintels, floor beams/cills as the case may be with necessary steel screws, raul plugs, or teak wood gatties including cutting masonry or concrete and making good the original surface using cement mortar, aluminium sections pretreated for removal of any Specification No. KBS using aluminium section powdered coated to a minimum of 60-70 microns with exterior durable pure polyester grade powder of approved quality including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Providing & fixing of glazed 2 Track-2 Panel Sliding Windows made out of multi Chamered uPVC sections with TPV gaskets having Isolated drainage and reinforced witgh Galvanized iron profiles through out the window. The outer frame having a overall size of 60x45 mm with reinforcement of 1 mm thickness and sash with overall size of 39x58 mm with reinforcement of 1.5mm thickness. Glazing bead for fixing ofglass shall be of size 20x18mm and coextruded with gasket. Windows shall be provided with 5mm plain float glass, standard hardware & single point locking system of flush lock, Wall thickness of frame & sash shall be 2-2.2 mm. including cost of all materials, labour, with all lead and lift, hire charges of machineries with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work.

Supplying and fixing in position first quality steam beach wood Single cot of size 1.00x2.00mtr of side bar, headrest, frame, footrest frame and legs is madeup wood of cross section 125x50mm, Melamine polish in spray with necessary compressor. Bed portion is fixed with 19mm thick BWP ply sheet with 5 no's of silver wood supports of cross section 50x25mm. The work shall be carried asper the designs and direction of Principal Chief Architect including cost of all materials, labour, lead and lift, hire charges of machineries etc., including all other incidental charges and as per the direction of the Engineer-In-Charge of work for successful completion of work .

Supplying of good quality Pillows of approved quality and design etc., including cost of all materials, labour, lead and lift, hire charges of machineries etc., including all other incidental charges and as per the direction of the Engineer-In-Charge of work for successful completion of work .

Supplying of good quality Pillows covers of approved quality and design etc. including cost of all materials, labour, lead and lift, hire charges of machineries etc., including all other incidental charges and as per the direction of the Engineer-In-Charge of work for successful completion of work .

Supplying & fixing in position good quality Single Bed spread of approved make & quality etc. including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying & fixing in position good quality woolen Blanket approved make & quality etc., including necessary thread, white lead, tapes etc. including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying and fixing in position Executive main table of Durian make of model(33303/A)/Equivalent Make and approved color and of size 2100mmL x 1050mmD x760mmH consisiting of Table with writing Pad & Wire Manager , Movable Pedestal with 2 Drawers , one interchangeable.Along with Side return unit of size 1425mmLx425mmDx650H with provision of key-board, CPU & storage etc including cost of all materials, labour, HOM of machinery, curing including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying and fixing in position Executive main table Imported type of Durian / featherlite/ Godrej/Equivalent Make and approved color and of size 1800mmL x 900mmD x760mmH consisiting of Table with writing Pad & Wire Manager , Movable Pedestal with 2 Drawers , one interchangeable.Along with Side return unit of size 1200mmLx450mmDx650H with provision of key-board, CPU & storage etc including cost of all materials, labour, with all lead and lift, hire charges of machineries with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work.

Supplying and fixing in position Executive main table Imported type of Durian / featherlite/ Godrej/Equivalent Make and approved color and of size 1650mmL x 750mmD x760mmH consisiting of Table with writing Pad & Wire Manager , Movable Pedestal with 2 Drawers , one interchangeable.Along with Side return unit of size 1200mmLx450mmDx650H with provision of key-board, CPU & storage etc including cost of all materials, labour, lead and lift, hire charges of machineries etc., including all other incidental charges and as per the direction of the Engineer-In-Charge of work for successful completion of work .

Providing and fixing Godrej make optimizer drive type single bay, model:K.D.Optimizer 18 two bay drive type of size:915mmW x 457mmD x 1980H(mm), single bay push pull type with 1 No. of single static, 2 Nos of single last one no. of twin mobile including cost of bottom rail, bottom channels, hinge etc., including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Providing and fixing Special make glazed Vitrified tiles (Granomite finish) of approved make, quality and colour of size 600x600x10mm thick fixed on existing flooring with a special roffe adhesive for flooring and skirting and jointed with neat cement cement slurry mix with pigments to match shade of tile etc., complete including providing spacers at required interval and removing stains etc., complete. including cost of all materials, labour, lead and lift, hire charges of machineries etc., including all other incidental charges and as per the direction of the Engineer-In-Charge of work for successful completion of work .

Providing and fixing in position collapsible steel shutters with single or double leaf with vertical channel 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size, with top and bottom rails of T iron sections of 40x40x6 mm with 38mm dia steel pulleys complete with bolt and nuts, locking arrangements, stoppers, handles on both sides with 7.5cms openings at 10 cms. c to c applying a priming coat of red lead paint. including cost of all materials, labour, lead and lift, hire charges of machineries etc., including all other incidental charges and as per the direction of the Engineer-In-Charge of work for successful completion of work - size of gate 2.4mx1.4m

Providing and applying painting in two coats with plastic emulsion paint of approved brand on wall surface to give an even approved shade after thoroughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specificationswith primer. Providing and applying two coats of wall putty to inside plastered walls and ceiling using white cement putty by scrapping and levelling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers, including cost of all materials, cost of all labour and scaffolding etc., complete as per specifications. (SR 2016-17 South zone SR item no. 7.1/Page no.31). Providing applying two coats of wall putty to inside plastered walls and ceiling using white cement putty. Scrapping and levelling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers, iincluding cost of all materials, labour, lead and lift, hire charges of machineries etc., including all other incidental charges and as per the direction of the Engineer-In-Charge of work for successful completion of work .

Applying priming coat over new wood surface and / or wood based surface, after brushing with ready mix enamel priming paint including preparing the surface after thoroughly cleaning oil, grease, dirt and foreign matter, sand papering and knotting ready mix paint including cost of all materials, labour, lead and lift, hire charges of machineries etc., including all other incidental charges and as per the direction of the Engineer-In-Charge of work for successful completion of work .

Providing and applying painting two coats ( excluding priming coat ) on new wood surface and / or wood based surface with enamel paint to give an even shade, cleaning the surface of all dirt, dust and foreign matter, sand papering including cost of all materials, labour, lead and lift, hire charges of machineries etc., including all other incidental charges and as per the direction of the Engineer-In-Charge of work for successful completion of work .

Providing and constructing precast concrete solid blocks with compressive strength not less than 3.5 Newton per sqmm with cement mortar 1:4 masonry (quoin, Jamb, closer blocks ) with solid concrete blocks of size 40x20x20cms conforming to I.S: 2185/1965 in superstructure including cost of all materials, labour, lead and lift, hire charges of machineries etc., including all other incidental charges and as per the direction of the Engineer-In-Charge of work for successful completion of work .

Providing and fixing unplasticised PVC connection pipe with brass union 15mm nominal bore 450mm length of PVC connection including cost of all materials, labour, lead and lift, hire charges of machineries etc., including all other incidental charges and as per the direction of the Engineer-In-Charge of work for successful completion of work .

Providing and fixing incumbency board, made out of SS steel of size 3'Lx5'HT, fixed to 4 sides with mirror studs etc. including cost of all materials, labour, lead and lift, hire charges of machineries etc., including all other incidental charges and as per the direction of the Engineer-In-Charge of work for successful completion of work .

Providing And Fixing 10mm bronze Glass with bewelled edge and polish with necessary Cutting. including cost of all materials, labour, with all lead and lift, hire charges of machineries with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work.

Providing And Fixing 8mm plain Glass with bewelled edge and polish with necessary Cutting.including cost of all materials, labour, lead and lift, hire charges of machineries etc., including all other incidental charges and as per the direction of the Engineer-In-Charge of work for successful completion of work .

Providing and fixing Magnetic White Marker Board of size 3'6"*4' including cost of all materials, labour, loading, unloading, lead, lift, transporting with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work.

Open Conduit System Supplying heavy gauge PVC conduit pipe …….dia .......mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. - 19/20mm dia 2mm thick including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Open Conduit System Supplying heavy gauge PVC conduit pipe 25mm dia 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. - including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Open Conduit System Supplying heavy gauge PVC conduit pipe 40mm dia 2.5mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. - including necessary thread, white lead, tapes etc including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete. - upto 50mm conduit CC floor including curing including cost of all materials, labour, with all lead and lift, hire charges of machineries with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work.

Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and on either end of the pipe terminated completely - 25mm including cost of all materials, labour, lead and lift, hire charges of machineries etc., including all other incidental charges and as per the direction of the Engineer-In-Charge of work for successful completion of work .

Supplying PVC/GI flexible conduit pipe 25mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and the either end of the pipe terminated completely. - ncluding all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying And Fixing "S" Hook made out of 14mm dia M.S.Rod.. including cost and conveyance of all materials, labour for all items of work HOM of equipment ncluding all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 1100V grade, copper conductor flexible multistrand FRLS PVC insulate, 2x1.5 sqmmcable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A - Short point up to 3Mtr from tapping point to out let via switch including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 1100V grade, copper conductor flexible multistrand FRLS PVC insulate, 2x1.5 sqmmcable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A - Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch including necessary thread, white lead, tapes etc. including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 1100V grade, copper conductor flexible multistrand FRLS PVC insulate, 2x1.5 sqmmcable confirming to the GTP, with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. GROUP A - Long point above 6Mtr up to 10Mtr from tapping point to out let via switch including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper with low conductor resistance single core wirein open or concealed system of wiring with specified IS-694;1990 & confirming to GTP of GROUP-A- 1.5 sqmm including cost of all materials, labour, with all lead and lift, hire charges of machineries with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work.

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper with low conductor resistance single core wirein open or concealed system of wiring with specified IS-694;1990 & confirming to GTP of GROUP-A- 2.5 sqmm including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper with low conductor resistance single core wirein open or concealed system of wiring with specified IS-694;1990 & confirming to GTP of GROUP-A- 4 sqmm ncluding all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper with low conductor resistance single core wirein open or concealed system of wiring with specified IS-694;1990 & confirming to GTP of GROUP-A- 6 sqmm including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying and surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates. The box should be firmly /surface/flush mounted after due groove cutting in Brick/C.C wall, fixing including necessary rawl plugs, Machine/NF screws etc., complete.- 1-3Way . including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying and surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates. The box should be firmly /surface/flush mounted after due groove cutting in Brick/C.C wall, fixing including necessary rawl plugs, Machine/NF screws etc., complete.- 6-8Way .including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying and surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates. The box should be firmly /surface/flush mounted after due groove cutting in Brick/C.C wall, fixing including necessary rawl plugs, Machine/NF screws etc., complete.- 10-12Way . including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. - 1 to 3 Module .including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. - 6 Module .including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. - 8 Module .including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. - 12 Module including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate.as per IS3854and IS 1293 GROUP A- 6Amps one way. including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate.as per IS3854and IS 1293 GROUP A- 6Amps 3way socket.. including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate.as per IS3854and IS 1293 GROUP A- 16Amps one way switch.including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate.as per IS3854and IS 1293 GROUP A- 6Amps Bell push.including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate.as per IS3854and IS 1293 GROUP A- TV/Telephone socket including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate.as per IS3854and IS 1293 GROUP A- RJ45/ I.O. outlet . including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying 4mm thick plastic sheet with necessary nitches for fixing switches regulators etc., and fixing on existing wooden or metal box using N.F. screws. including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying and drawing Flexible Multicore cable manufactured with electrolytic grade flexible copper conductor confirming to table 3 class 5 of IS;8130-1984 and PVC insulation and sheated suitable for working voltage up to 1100 volts as per IS-694;1990 & confirming to GTP of GROUP-B. - 6c x 2.5Sqmm including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying industrial box type suitable for 28 w T5 single/twin Lamp along with stove enameled white reflector & suspension mounted luminaire & optical reflector. Prewired with HF electronic Ballast, push fit type lamp holders & main connectors. Channel cover shall be made of CRCA MS sheet and finishing is done with stove enameled white with end caps made of engineering plastic. - 1x4'-28 watts. including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supply of LED Square Recessed Down lighter with 18 W System Wattage. Housing shall be with powder coated pressure die cast aluminum alloy with corrosion resistant polyester powder coat & with extended heat sink. Diffuser/cover made of Lexan plastic material. Rated life shall be L70 @ 50000 Hrs. which shall has inbuilt electrical protection like over/under voltage, short ciruit , overload, open circuit & miswiring . Driver is on constant current driver output driver @0.06A with PF>0.9 with line voltage @ 220-240 V @ 50/60 Hz, driver efficiency > 85% & THD<15% LED Efficienty>130 lm/W at 1 W & Fixture Efficienty > 75 lm/w with CRI>75 with injection moulded polycarbonate lens. 5 years Warranty against any manufacturing defect working under standard electrical condition. including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supply of 2'x2' LED recessed luminaire with… Watts system wattage. Housing shall be with pressure die cast aluminum alloy with corrosion proof resistant polyester power coated. Driver operates with voltage range from 100 V to 270 V 50/60 Hz with short circuit, overload & mis-wiring protection. Lumen Maintenance of 70% at 50000 Hrs. Injection moulded poly carbonate diffuser for better mechanical stability, light transmission & avoid pot hole effect. Junction temperature shal < 70 degree Celsius. Driver is on constant current driver @ 0.06 A with PF>0.92 with line voltage @ 220-240 V @ 50/6- Hz, driver effeciency >85% & THD<15% LED Efficiency > 130 lm/W at 1W & Fixture Efficiency > 75lm/w with CRI>75 with injection moulded polycarbonate lens with < 80 mm depth. 5 years warranty against any manufacturing defect working under standard electrical condition. - LED modular down light 2'x2'-36 watts. including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. - 12" Sweep (300mm) . including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc. for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system. - 56" sweep (1400) Regular model. including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

supplying wall mounting fan suitable to operate at single -phase 230v A.C. supply. -400mm sweep including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Fixing all types and all capacities of fluorescent/false ceiling/spot light/CFL /LED fittings indoor on the wall / ceiling/ rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps - On wall/ceiling/Rafter/Girders. including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Fixing a ceiling/wall mounting fan of all capacities and all types with necessary clamps and S hook made out of 15mm dia MS rod, with 5 amps ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality mounted on a suitable size wooden board and wired complete. including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Extra length of GI pipe of class B 19mm dia for down rod.including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame if required. including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Microprocessed release and Earth Fault as per IS-13947. ( Icu = Ics) FOUR POLE - 125-160Amps 25kA.including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying and fixing regular MCCB distribution Panel confirm to IS 8828, on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing of suitable type capacity MCCB's as an incomer for 3 phase Double door with necessary bus bar completely wired to use on 440Volts 3phase 4 wire powder coated painting etc., complete with a provision for fixing of single/three phase suitable capacity MCCB/MCB's as outgoings conferming to IS8828. - 4Way including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required.confirming to IEC 60898 - 5-32Amps SP . including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required.confirming to IEC 60898 - 5-32Amps DP . including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required.confirming to IEC 60898 - 40-63 Amps TPn . including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying and fixing regular MCB distribution boards on wall/wood board/flush mounting using required clamps, bolts, nuts etc.. With provisions for fixing suitable type capacity MCB's single phase /3 phase/single door with powder coated painting. Made out of 14 SWG MS encloure. - II - Double door -4 way SP & N including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying and fixing regular MCB distribution boards on wall/wood board/flush mounting using required clamps, bolts, nuts etc.. With provisions for fixing suitable type capacity MCB's single phase /3 phase/single door with powder coated painting. Made out of 14 SWG MS encloure. - II - Double door -4 way TP & N including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying and fixing regular MCB distribution boards on wall/wood board/flush mounting using required clamps, bolts, nuts etc.. With provisions for fixing suitable type capacity MCB's single phase /3 phase/single door with powder coated painting. Made out of 14 SWG MS encloure. - II - Double door -6 way TP & N including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying, fixing , wiring, earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode should be covered 150mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts. including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.-GI strip- 25x3mm including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.-Copper strip- 600x600x3mm plate including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying of 1.1 kv LT UG cable having aluminium conductor PVC insulated, extruded inner sheathed, galvanised, steel strip ( except 2Cx10sq.mm wire armoured) confirming to IS-3975:1990 (No. of strip indicated in GTP) & extruded PVC outer sheathed armoured cable with specified IS-1554 part-1:1988 & confirming to GTP of GROUP-A- 3.5 core 50 sqmm. including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes- 50 sqmm Long Barrel including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying of…TR split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 Volts with hermetically sealed compressor with air cooled condenser, motor capacitor and start run capacitors, relay and over load protector internal unit, with one indoor and one outdoor unit. The condenser unit will be placed outside the room on the terrace to avoid noise including standard length of suitable size copper tubing covered with insulation tube.(High wall chorded/cordless) suitable capacity 3 core sheathed/ PVC copper cable and a battery operated wireless remote unit. 5star - 1.5 ton capacity . including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support up to 3.0 ton split/cassette type A/C. including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Extra for Fabrication supply and fixing of Stand fabricated using slotted angle/L.angle of size 6mm x 50mm for mounting out door/indoor A.C. unit./ Batteries. including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying & filling refrigerent (F-22/F/12) for air conditioning equipments. Which includes the labour & Nitrogen gas for pressure and leak testing.(84/11) including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

"supply erection, testing, commissioning of Cassette type split Air conditioners suitable for operation on single/three phase AC supply, hermetically sealed compressor with air cooled condenser motor capacitor start, capacitors run, relay and over load protection, one ceiling mounted indoor unit and one outdoor condenser unit including standard accesories covered with inculsation tube including battery operated cordless unit. 3.0 TR Cassettle 2 Ph. including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supply,installation of 5/8" and 7/8" Hard drawn refrigerant pipe and insulation suitable for 11TR ductable split Air-Conditioner. including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying, errection, testing and commis-sioning of voltage stabilizer suitable for 170 to 270 v in put and load variation from no load to full load, with over load protection, spike suppression, operating at 00 C.To 400 C. Range etc., complete. 3KVA Capacity including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

supplying and laying double walled corrugated (DWC) HDPE pipe including all necessary connecting Sockets/Couplings/Tees/Bends/End-caps of same materials in exiting trench as per IS 14930 part-II suitable for drawing underground cables. 40mm OD/32MM ID-including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

supply, installation, testing and commissioning of DLP - Data Projector with 5x8 motorised screen & ceiling mount Kit Brightness- 300 ansi lumens ȃ€ȼ Resolution ȃ True XGA Contrast Ratio - 500:1, Weight 2.98 kgs Technology LCD Compatibility - upto UXGA video Compatibility- NTSC, NTSC4.43, pAL, PAL-60, PAL-M, PAL-N, SECAM, HDTV:1080i,720p,576p,576i,480p, y/cb/cr component (with optional cable ADP-CV1E), lamp life- up to 3000 hours Ecomode- up to 4000 hours keystone Automatic or manual inputs-2 RGB inputs(D-sub 15-pin), outputs 1 output. 1 S-video (DIN 4-pin), 1 Video(RCA), 2 L/R RCA Audio - 2 stereo mini audio, 1 PC Control -(DIN 8-Pin) with Remote control. i Cost of conveyance for allmaterials with the accessories required for completion as per the detailed specification. including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

supply, installation, testing and commissioning of, 9 core multistrand high gain low loss cable with required end connectors 10 meter to connect between the delegate unit and controller including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Amplifier - supply, installation, testing and commissioning of, booster amplifier with power handling of 250 watt 4ohms dual abd 100/70 volt output on bridge mode single channel. Rack mountable specs: Frequency response: 20 htz to 20 khtz including all lead and lift loading and unloading chargres , Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Speaker Cable- supply, installation, testing and commissioning professional grade 2.5 sq mm TIN coated low loss 2 core multi strand Oxidation Free speaker cable including all lead and lift loading and unloading chargres , Cost of material with the accessories. & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Connectors and I/C cables- supply, installation, testing and commissioning of professional grade audio connectors for inter connection cables with in the rack and other units as well auditorium as required including all lead and lift loading and unloading chargres , Cost of material with the accessories. & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying and drawing UTP-CAT 6E LAN cable including all lead and lift loading and unloading chargres , Cost of material with the accessories. & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable - 2 pair including all lead and lift loading and unloading chargres , Cost of material with the accessories. & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable -5 pair including all lead and lift loading and unloading chargres , Cost of material with the accessories. & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying & fixing of switch mounting rack with power manager & cable manager - 18U with 650 mm depth including all lead and lift loading and unloading chargres , Cost of material with the accessories. & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

supplying & fixing of power strip including all lead and lift loading and unloading chargres , Cost of material with the accessories. & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

supplying & fixing of Fan. including all lead and lift loading and unloading chargres , Cost of material with the accessories. & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

supplying fixing of Network Switches - 24 port Gigabyte (manageable) including all lead and lift loading and unloading chargres , Cost of material with the accessories. & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

supplying & fixing of I/O socket with back box - Single I/O including all lead and lift loading and unloading chargres , Cost of material with the accessories. & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

supplying & fixing of … mtrs Cat 6 patch cable - 2 mtrs. including all lead and lift loading and unloading chargres , Cost of material with the accessories. & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying & fixing of patch panel for LAN cabling - 24 port 10/100 patch panel. including all lead and lift loading and unloading chargres , Cost of material with the accessories. & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying Installation testing and Commissiong of Micro precess base Fire alram Control panel having power regulation Circuit, which conner to 230 AC to @$V.D.C. Indicating FIRE-FAULT, ISOLATION with Feather touch push button switches, Test facility also with work test facility arrangement, provided in the panel. All this electronic circuits componets are assembled in M.S.16 gauge suitable panel cabinet with glass Fraonted and locking arrangements including all lead and lift loading and unloading chargres , Cost of material with the accessories. & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work -Make Ravel/Golbe/Royale 12 Zone.

Supplying Installing, testing and commissioning of Smoke/Heat detector Photo electric type detctor with base LED indicator on Smioke detector fixed cum rise temperature type heat detector with base Make Applow/ System Sensor complete including all lead and lift loading and unloading chargres , Cost of material with the accessories. & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying Installing, testing and commissioning of electronic Hooter, it conists of electronic circuit to give dual Fire alaram sound with works 24V DC with speaker all encosed in suitable in MS 16 gauge red painted box. including all lead and lift loading and unloading chargres , Cost of material with the accessories. & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supply, installation, testing & commissioning of Manual Call point : It consists of Micro push button switch with LED and circuitry etc. works on 24V DC LED indicator with glass Fronted, Also with hammer for breaking the glass in case of Fire. Accommodated in 75x75x30mm size M.S.16 gauge red enamel painted box Make/Golbe/Ravel/Royaleincluding all lead and lift loading and unloading chargres , Cost of material with the accessories. & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying Installing, testing and commissioning of Response Indicator constists of twin LED wioth electronic circutarx work on 24 DC enclose in PVC retangular. including all lead and lift loading and unloading chargres , Cost of material with the accessories. & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supply, Installation, Testing & Commissioning of 2x1.5 sq.mm Copper armored cable with fixture etc for smoke detectors hooters & Manual Call Points- including all lead and lift loading and unloading chargres , Cost of material with the accessories. & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Providing ABC Powder based MAP 50, 2Kg:- Providing 2kg Fire Extinguisher Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, Gross Weight 3.6 Kg, empty weight 1.6 Kg, Can Height 344MM, Diameter 108MM,Discharge Time less than 8 Secs, Controllable discharge mechanism (Squeeze grip with easy snap safety seal), Range minimum 2 meters, applicable on Class A,B,C and electrically started Fire,A Rating 1A, B Rating 8B, Can construction : Deep drawn & Co., Mig welded, valve Construciton : Forging and Mechining, Internal Coating of Can: Epoxy powder coating, External Coating of Can: Epoxy Polyster power coating, Sheet metal thickness: 1.60MM, 5 years Warranty with instalert system with Superior quality EPDM Rubber Hosepipe etc.,including all lead and lift loading and unloading chargres , Cost of material with the accessories. & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Providing ABC Powder based MAP 50, 4Kg:- Providing 4kg Fire Extinguisher Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, Gross Weight 6.9 Kg, empty weight 2.9 Kg, Can Height 440MM, Diameter 140MM,Discharge Time less than 13 Secs, Controllable discharge mechanism (Squeeze grip with easy snap safety seal), Range minimum 4 meters, applicable on Class A,B,C and electrically started Fire, A Rating 2A, B Rating 21B, Can construction : Deep drawn & Co.,Mig welded, valve Construciton : Forging and Mechining, Internal Coating of Can: Epoxy powder coating, External Coating of Can: Epoxy Polyster power coating, Sheet metal thickness: 1.60MM, Helium Leak Detection Tested, ISI and EN Approved, 5 years Warranty with instalert system with Superior quality EPDM Rubber Hosepipe etc., including all lead and lift loading and unloading chargres , Cost of material with the accessories. & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

CO2 2Kg Squeeze grip:- Providing 2 Kg CO2 Gas Type Fire Extinugisher Squeeze grip type, used Unused Mechanism, Squeeze Grip, Gross Weight 9.1 Kg. empty Weight 7.1 Kg. Can Height 595MM Diameter 108MM, Discharge Time less than 8 Secs, Controllable discharge mechanism, Applicable on Class B&C Fire, B Rating 8B, Can Construction : Hot spinning/Forging,Valve Construction : Forging & Machining, Internal Coating of Can :Not Applicable, External coating of Can : Spray Painting, Sheet metalthickness : 4.0MM ISI Approved, 1 Year Warranty.with instalert system with Superior quality EPDM Rubber Hosepipe etc., including all lead and lift loading and unloading chargres , Cost of material with the accessories. & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/ conduit entry as required with one coat of primer of approved make etc.including all lead and lift loading and unloading chargres , Cost of material with the accessories. & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Supply, installation and testing and Commissioning of 10 KVA online UPS with 1GBT PWM technology, galvanic isolation, LCD display 3 phase input to single phase output with 16Nos of 12V 75 AH capacity SMF batteries for 60 minutes backup time with interconnecting cable and suitable battery stand including all lead and lift loading and unloading chargres , Cost of material with the accessories. & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Providing & Supplying FABRICATION AND SUPPLY OF CENTRIFUGAL BLOWER Blower having capacity of 18,500 CMH of Static Pressure at 60 mmWG arrrAca AAAca A direct driven by 5 hp/1440rpm,415V,50hz,3ph ISI Motor.(Motor Make: ABB/CG/Kirloskar) including all lead and lift loading and unloading chargres , Cost of material with the accessories. & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Providing & Supplying OF G.I DUCTING WITH DAMPERS Made out of G.I sheets 22/24 swg along with M.S flanges for blower inlet and outlet including all lead and lift loading and unloading chargres , Cost of material with the accessories. & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Installation charges for exhaust system including all lead and lift loading and unloading chargres , Cost of material with the accessories. & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Providing & Supplying OF FRESH AIR SUPPLY GRILLS OF ALUMINIUM WITH VOLUME CONTROL DAMPER including all lead and lift loading and unloading chargres , Cost of material with the accessories. & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Providing & Supplying OF FRESH AIR FILTERS OF H.D.PE 10 MICRONS WITH FILTERS FIXING HOPPER OF G.I including all lead and lift loading and unloading chargres , Cost of material with the accessories. & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

Providing And Fixing RO+ UV Water Purifier of Approved Brand of Built with the ability to sense the water source and automatically choose the purification technology for water quality Enhanced and protection with the highly developed silver impregnated carbon cartridge with Hi Flo ensures that you get 25 liters of water per hour Enhanced storage capacity of 10 liters.including all lead and lift loading and unloading chargres , Cost of material with the accessories. & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work

SREE BUILDERS

Bidder Name

Sanjay Marketing and Publicity Services

SREE BUILDERS