SPECIAL REPAIRS TO TOILET AT BLDG NO P-27, 28, 34, 35, 59, 60 AND DRAINAGE SYSTEM AND PROVN OF HARDSTANDING NEAR BLDG NO P-77/1 AT GE KAMPTEE

Amount

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/loose soil including necessary rolling and consolidation complete all as specified and directed.

M&L for 150mm soling (or sub base) with broken boulders or quarried stone, interstices filled, surfaces formed and rolled and consolidated to required gradient and camber complete all as specified and directed.

M&L for cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M&L for reinforced cement concrete (design mix M-25) using 20mm graded stone aggregate, as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under reamed piles, hardstanding and similar work complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shapes required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, grade 'A' complete all as specified and directed.

Demolition of unreinforced cement concrete in floors and pavings not exc 15cm thickness, below or above ground level complete all as specified and directed.

Demolition of brickwork built in cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as specified and directed.

Excavation in trenches, not exc 1.5m wide and not exc 1.5m in depth, for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc not exc 10 sqm on plan and not exc 1.5m in depth and getting out in soft / loose soil complete all as specified and directed.

M&L for formwork to faces of side walls of drains and similar work, fair finished complete all as specified and directed.

M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs not exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm wide for rough finish surface complete all as specified and directed.

M&L for RCC type A1, 1:1.5:3 (using 20mm graded stone aggregate) as in drains (bottom and side walls) and similar work complete all as specified and directed.

M&L for brick work with fly ash bricks, old size, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping, weathering, slightly rounded or chamfered etc complete all as specified and directed.

S&F framed guard bars with mild steel square bars with ends of bars shouldered and/ or riveted and similar work confirming to Fe 290 Gde-E-165 complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for 50mm dia low density polyethylene pipes (LDPE) of pressure rating 6 kg/cm2, laid in trenches complete all as specified and directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point of soils complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in soft / loose soil complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non-skid colour ceramic tiles 7 to 8mm thick, area of each tile exceeding 0.06 Sqm but not exc 0.11 Sqm in floors etc, set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed or bedding layers in cement mortar 1:6 for laying of floor finishes complete all as specified and directed.

M&L for coloured glazed tiles in vertical surfaces 350x250x7mm / 300x450x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick plaster as in screed bed or bedding layers in cement mortar (1:4) on vertical surfaces complete all as specified and directed.

S&F GI tubing 15mm bore, medium grade with all fittings and fixed to wall including taking up or down existing tubing including connections complete all as specified and directed.

S&F GI tubing 20mm bore, medium grade with all fittings and fixed to wall including taking up or down existing tubing including connections complete all as specified and directed.

Taking down cement or cement lime plaster including roots of trees and trees of any girth, description on brick or stone wall etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering on brick or concrete surfaces in CM 1:6, finished even & smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying with three coats of white wash complete all as specified and directed.

M&L for preparation of old surfaces of ceiling & applying two coats of white wash complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall and applying with two coats of white wash complete all as specified and directed.

Taking down door / window frame with shutter (without taking off shutter from the frame) area not exc 1.5 sqm complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm, made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube & fixing in opening complete all as specified and directed.

S&F factory made solid PVC panelled door shutter, 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet strip of 20mm width struck inside with solvent cement for styles and plain colour PVC sheet for top rail: panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the style and rail with suitable PVC sheet beading and jointed together with solvent cement etc fixed with frame at site complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges, peg stay to receive glazing or gauzing and applying one coat of primer including fixing of hold fast of size 25 x 5mm of flat iron etc complete all as specified and directed.

S&F steel window with side hung shutters including projecting or box or butt type hinges with steel handle, peg stay and divided into square with glazing bars dovetailed or welded, to receive glazing or gauzing including one coat of primer including fixing of hold fast of size 25 x 5mm of flat iron etc complete all as specified and directed.

S&F 100mm long mild steel butt hinges, medium weight, cold rolled and fixed with screws /welded to frames etc complete all as specified and directed.

S&F 150mm extruded aluminium handles, fabricated type, anodised etc complete all as specified and directed.

S&F 125mm long aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 250mm aluminium anodised sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast alumnium alloy and fixed complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality, not exc 0.50 sqm in each pane and fixed with oil putty or with wooden beading in squares etc complete all as specified and directed.

All as per item No 40 above but figured glass complete all as specified and directed.

M&L for preparation of new or previousaly untreated surface steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

S&F in repair pillar taps, 15mm bore, cast copper alloy with capstan heads, chromium plated, fancy type, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwd shank and fly nut, screwd for iron pipes complete all as specified and directed.

S&F in repairs stop valve/ angle cock, 15mm dia, cast copper alloy, chromium plated, fancy type, high pressure with crutch or butter fly handle, screwed for iron pipe or union and fixed complete all as specified and directed.

All as per item No 44 above but concealed type complete all as specified and directed.

S&F in repairs vitreous china wash down water closet (pedestal pattern) 'P' or 'S' trap including jointing including plastic water closet seat, closed pattern with flat bottom and seat cover and mild steel CP or aluminimised hinging device complete all as specified and directed.

S&F in repairs vitreous china squatting pan, "Orissa" pattern, 580 x 440mm long with integral foot rest, S or P trap including connection to trap and to flushing pipe etc complete including making good to floor complete all as specified and directed.

S&F in repairs wash hand basin (flat back or angle back) of size 550 x 400mm, white, including coupling, waste pipe, chain and plug, porcelain stopper including for & pinning in ends of brackets including & fixing of waste pipe complete all as specified and directed.

S&F in repair vitreous china urinal, half stall pattern, white (excluding flushing cistern, flush pipe and waste pipe) including connections to flushing pipe and urinal spreader complete all as specified and directed.

S&F in repairs 10 ltr capacity PVC valve less symphonic action type flushing cistern, low level, white with inlet ball valve, float and handle including bracket etc complete all as specified and directed.

S&F in repairs 65mm dia shower rose, chromium plated with or without swivel joints including fixing to 15mm bore of pipe complete all as specified and directed. Make:- Prayag Cat No BS-29 or equivalent.

S&F in repair health faucet of 15mm bore brass chromium plated including PVC pipe to connection GI tubing of 15mm bore complete all as specified and directed. Make:- Prayag Cat No BEA-90 or equivalent.

S&F in repairs 15mm dia bib tap, cast copper alloy, chromium plated, fancy type with crutch or butter fly handle screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair soap dish of PTMT complete all as specified and directed. Make:- Prayag Cat No 195 or equivalent.

S&F in repair 200mm long corner glass shelf with brackets complete all as specified and directed. Make:- Prayag Cat No BEA-48 or equivalent.

S&F in repair glass shelf of size 500x60mm with brackets complete all as specified and directed. Make:- Prayag Cat No BEA-47 or equivalent.

S&F in repair PVC connection of 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair towel rail of brass, chromium plated with glossy finish complete all as specified and directed. Make:- Prayag Cat No BA-01 or equivalent.

S&F in repair grating doom of 100mm dia of PTMT (Min weight 40 gms) complete all as specified and directed. Make:- Prayag Cat No 111 or equivalent.

S&F rotational moulded polyethylene double layered water storage tanks (cylindrical vertical with closed top) of 2000ltr capacity, hoisted and fixed in position including PTMT ball valve of 20mm dia and top cover including dismantling of existing water tank as specified in SSR Part I complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.39,680.00]

M/s DS Khekde

NORTH INDIA PEST CONTROL

Meet Road Lines

M/s Jagdish Staioners and General Stores

M/S J.A CHAWHAN

Bidder Name

Meet Road Lines

M/S J.A CHAWHAN

M/s DS Khekde

VIJ ASSOCIATES

M/s Jagdish Staioners and General Stores

NORTH INDIA PEST CONTROL