NIT No. 08(2020-21) Item no. 3

Disconnection of Electric connection of motor from panel to starter and motor etc. as required. and Decoupled the pump and motor after removing the coupling, etc. with the help of tools & tackles as required &, removing all the nuts, bolts of suction and delivery side sluice valve, NRV, tappers, bands etc. and removing the old Sluice valves and NRV’s as required.

Lifting the pump and motor on ground level by heavy manual labours or tripod etc and Removing of foundation base frame from the RCC foundation by cutting with the gas cutter etc. and taking out of complete damage frame with the help of Tripod chain pulley block to a safer side of pump house.

Breaking of RCC by concrete breaker for foundation bolt pocket and foundation with RCC for complete foundation as required for fresh foundation with RCC. This i/c removing of malba of CC from the foundation side by manual labour from ground floor to outside of pump house.

Removing of foundation bolt by manual labour to clean by hammering of chisel to make the bolt free from the RCC foundation bolt.

Providing & Fixing of SS foundation bolt.@ 4nos. as per site requirement.

S/O horizontal split casing pump with impeller, Neck Ring and casing (CI), shaft & sleeve as per in standard fitted condition suitable for head 30 mtrs, discharge 180 m3/hr, suitable for Motor 22 KW.Make: Kirloskar/ M&P/DJB approved make.

Supply of nuts bolts and washers as per site requirement.

Supply of neoprene packing

Fabrication of MS Base Frame made from MS Chanel size 125mm x 65mm cross support and also fixing with MS vertical support U channel the foundation bolt to absorb the vibration and 4nos drilling as per existing site required.

Fabrication of MS tapper of Suction and Delivery side with D/F for the both Pumpsets as per site requirement.

Supply of Non Return Valve of size 200 mm , PN 1.0 Make – Kirloskar/IVC/DJB approved makes.

Supply of Sluice Valve of size 200 mm , PN 1.0 Make – Kirloskar/IVC.

Supply of Sluice Valve of size 250 mm , PN 1.0 Make – Kirloskar/IVC.

S/F pressure gauge along with gauge cock, copper/ G.I. tubing soldering etc as required. Make: Febig / HGuru.

Fixing of SS foundation bolts as in pocket by proper welding to MS jaal of RCC with proper support etc. @ 4nos. and Filing of Civil material of CC in ratio 1:2:4 for grip of foundation bolt in CC structure.

Fixing of MS Base frame made out of MS channel on the CC foundation and tightening the foundation nut and bolt. With the help of heavy manual labour and tripod with all tools and tackles required to complete the job.

Installation and fixing of the pumpand motors (motors shall be provided by the department) on the base frame including couple the pump and motor with new tyre as required, jointing the pump with suction/ delivery line. Fixing of New Valves of Suction & delivery sides, Non return Valves, MS Tapers with nut & bolts, packing, etc. as required to complete the job. The job also include the laying of existing cable, making connection the motor from starter/panel etc. i/c watch and ward, cartage , loading and unloading taking all safety precaution arrangement, all tools and tackles the work including testing and commissioning all E&M equipment i/c pump and motor at no load and full load.

AVADH ENGINEERING

Bansal Engineers and Traders

P.K. Electricals

JMD ASSOCIATES