PROVISION OF SECURITY FENCING AT 132 SATA REGT AND QM BLDG No 1 TO BLDG No 10 OF 619 TPT COY ASC CATTLE FENCING AROUND OR LIVING OTM AACN BLDG No 2 OF 173 I FD WKSP COY PINAKA AND CERTAIN REV SANCTIONED WORKS UNDER AGE BR II NASIRABAD

Amount

Surface dressing n exc 15 cm deep in soft/ loose soil complete all as specified and directed.

Surface excavation n. exc. 30cm deep and averaging 15cm deep and getting out soft/ loose soil complete all as specified and as directed

Excavation in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in soft/loose soil complete all as specified & directed.

Excavating in post holes (or similar holes) each n.exc 0.5 cum getting out in soft/loose soil including returning, filling in and ramming earth in layers n.exc 25cm, watering and removing surplus soil to a distance n.exc 50m and making good surfaces complete all as specifed and directed.

Removal of excavated material (soil) n.exc 50m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified & directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M & L PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in mud stops, kerbs etc including weathering slightly, rounded or chamfered on edges including necessary form work complete all as specified and directed.

M&L for MS work conforming to Fe-290 Gde-E-165 for fencing post and struts made from angle iron and flat iron in any section including cutting tops to shape, drilling holes and notching for fixing of wires etc complete all as specified and directed.

Supply only chain link MS Zink coating 60gsm as per IS 4826 fencing 50mm X 50mm mesh and 3mm dia or wire complete all as specified. NOTE: This item shall be measured and paid as per actual weight or standard weight as per SSR which ever is less. Make :- TATA (Wiron)/JINDAL

Fixing only chain link fencing including line wire, any mesh, size and any type of standards rails straining bolt etc including provision of binding wire complete all as specified and directed.

Supply only 4mm dia galvnised medium coated steel wire cut to length as required for fixing chain link fencing etc complete all as specified and directed. Make: TATA (Wiron) or Jindal

S & F Galvanised 2 strand, steel barbed wire, 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, includdigng, securing or tying at crossings with and provisiion of galavnised (Zink coating 60 gsm) mild steel wire, staples or steel pins, etc as directed each line wire to measured complete all as specified and directed. Make :- TATA (Wiron) /JINDAL

M&L 5 to 10 mm dia mild steel screw bolts (Machine made) with hexoganal or suqare head at one end and screwed the other or screwed both ends each screwed and to be bolted wih washers and one hexoganal or suqare not exc 75mm long including fixed with welding to angle complete all as specified and directed.

M & L for preparation of new steel & iron surface of width or girth exceeding 10 cm and applying two coats of synthetic enamel paint of Ist quality over a coat of red oxide primer complete all as specified and directed

M&L for preparation of new steel & iron surfaces n.exc 10 cm width or girth and apply two coats of synthetic enamel paint of 1st quality over a coat of red oxide primer complete all as specified and directed.

M & L for concrete surface of width or girth exceeding 10cm and applying two coats of synthetic enamel paint of Ist quality over a coat of primer complete all as specified and directed

M & L for preparing of steel and iron works treating ends of posts, treated with tarred area exc 0.1 sq. m but n exc 0.5 sq. m each complete all as specified and directed

M & L for preparation of newly plastered surface of wall and applying two coat of cement base paint complete all as specified and directed.

M&L for broken stone hard core of gauge n.exc 63mm deposited, spread and levelled in layers n.exc 15 cm watered and rammed to a true surfaces complete all as specified & directed.

Filling under floor with soil including spreading, levelling, watering and well ramming in layers n exc 25 cm thick complete all as specified and directed

M & L for 100mm thick cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base, floors complete all as specified and directed.

M & L for 75mm thick PCC (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in sub base floor complete all as specified and directed.

Material and labour for 100 mm thick, PCC 1:2:4, Type B-2 using 40mm graded stone aggregate as in Floors / Hard standing etc, surface finished even and smooth and spike rolling to surfaces or making impressions of expanded metal, while the concrete is green complete all as specified and as directed by Engineer - in - Charge.

M & L for 150mm thick spread thickness soling for sub base with broken boulders or quarried stone, inter sticks filled, surface formed and rolled and consolidated to required gradient and camber complete all as specified and directed.

M & L for rubberised machine pressed precast conctete interlocking paver block any shape and size ISI marked of 60 mm thickness, M-35 Grade with grey cement and pigment coloured,reflective type of approved quality laid over and including 25 mm thick sand cushion vibrated with mechanical vibrator complete all as specified and directed.

M & L for forming construction (Dummy) joints 65mm deep x 10mm wide filled with sealing compound (graded 'A') complete all as specified and directed.

S & F rolled mild steel conforming to Fe-410W (Gde E 250 quality A) as in main and cross beams, hip and jack refters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates and similar works and fixing complete all as specified & directed.

Cutting holes of superficial area exc. 150 sqcm but not exc 400 sqcm into or through brick walls built in mud mortar and making good in cement mortar (1:3) or cement concrete (1:2:4) type B-I as required complete all as specified & directed.

S & F false ceiling with Everest Fibre Cement Designer tile Ivory painted (High Pressure Steam Cured) of 4mm thickness(as per IS: 14862) of size 595x595 mm and any one of the desin (occeanic, lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length, and 15x32mm made from 0.30 mm thick sheet, and cross "T" of size 15x32mm made of 0.30 mm sheet, spaced between main "T" at 600mm c/c to form a grid of 600X600mm and wall angle of size 15x20mm made of 0.30 mm thick sheet and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixures,smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing rafter, purlin,etc with dash fasteners,GI adjustable rods of 3mm dia with gavanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15mm of all T-sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm, all complete at all height complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls, laid in trenches or in floors complete all as specified and directed.

M&L for providing precast cement concrete 1:3:6 type C-1 (using 20mm thick graded stone aggrigate) as in kerb stone etc set in CM 1:6 complete all as specified and directed.

M/s SUNIL ENTERPRISES

SHREE BALAJI TRADING CORPORATION

kirtiman traders

SINGH ENTERPRISES

MADAN MOHAN JAIN sons