Repair/ Maint of lighting conductor and street lights and other connected items works at ASD Kasubegu area under GE (East) Ferozepur Cantt

Amount

Carrying out servicing/maint of 62.5 KVA DG set, Make : 'Greaves/Kirloskar' including 'B' check as per manufacturers mannual through authorised dealer of DG set manufacturer of existing DG Make and testing of DG set complete all as directed by Engineer-in-Charge. Note :- All material/spares parts required for carrying out above maintenance/servicing shall be measured and paid separetely as mentioned below and shall be of make-Greaves/Kirloskar/Cummins as per make of DG set and labour element required for replacing the spares parts including replacement of minor spare parts which are essential for carrying out servicing/maintenance of DG sets shall deemed to be included in the unit rate quoted by the tenderer against item No.1 above.

Supply only Lub oil filter, complete all as specified and directed.

Supply only Fuel filter insert complete all as specified and directed.

Supply only Fuel pre filter all as specified and directed.

Supply only Air clean element all as specified and directed.

Supply only Hose pipe & Flexible pipe, complete set all as specified and directed.

Supply only Fan belt for water pump all as specified and directed.

Supply only Fan belt for alternator dynamo complete all as specified and directed.

All as per item No. 1 here in before but for DG Set of capacity 40 KVA of any make, complete all as specified and directed

Supply only Lub oil filter all as specified and directed.

Supply only Fuel filter insert all as specified and directed.

Supply only Fuel pre filter all as specified and directed.

Supply only Air clean element all as specified and directed.

Supply only Hose pipe & Flexible pipe complete set as directed.

Supply only Fan belt for water pump all as specified and directed.

Supply only Fan belt for alternator dynamo complete all as specified and directed.

Repair/servicing of radiator assembly of 62.5 KVA DG set (Greaves/Kirloskar/ Cummins) after dismanteling and removing cooling fans, guard plates and lowering the same from engine after draining out water from radiator and scrapping / removing sludge / scale inside tank with acid including replacement MS tank (botom portion) at rusted portion by cutting/ welding / brazing with 2mm thick copper plate including painting. Remounting the same at its original position and repalcement of pre mixed coolent as per the ratio fixed by manufacturer and testing complete all as directed by Enginer-in-Charge. (Note- Pre mixed coolent shall be measured and paid separately under relevant item of schedule)

All as per item No. 17 but for 40 KVA DG Set of Greaves /Cummins / Kirloskar, complete all as specified and directed.

Supply and fixing in replacement of new Self starter, auto lock, 12/24V of existing make, on the 62.5 KVA DG set and taking out u/s self starter from DG set, complete all as specified and directed.

Taking down unserviceable Self starter from the DG Set 40 to 62.5 KVA including dismantling the Self starter and taking out burnt winding armature & field coil and cleaning the slot including re winding of armature, field coil with enameled copper conductor of existing gauge including insulating material and heat varnish. Replacing worn out armature auto lock-01PC, Carbon brushes set, Pinion set, copper bush Set, Guard piece rubber, carbon rocker, Solinoid coil and reassembling the Self starter and mounting on its original position by replacing worn out nut bolts washers including painting of self starter all as directed by the Engr in Charge.

Repair/Servicing of water pump and replacement of water kit and water seal of 40 to 62.5 KVA DG Set complete all as specified and directed.

Dismantling and taking down alternator assembly from existing engine and transporting to workshop and carry out servicing / maintenance of alternator unit of capacity 62.5 KVA DG set as per the phase work :- (a) Opening of Alternator and cleaning / remvoing dust from armature and field coil. (b) Cleaning of used / old lubricated substances drive/non drive end bearings. (c) Cleaning end cheeking of AVR unit (d) Cheking and tighting of coupling bolts and replacement of rubber inserts. (e) M&L for carrying out heat varnishing for field and armature coil and kept in heating chamber for 48 hours for drying properly. (f) Replacement of Bearings as per existing size. (g) Reassembling complete unit and carrying out testing at workshop and transportation to installation and coupling with DG Set including necessary alignment, cable connections all as specified and directed by Engr - in Charge

Supply & fixing Ball bearing suitable for 40 to 62.5 KVA DG set, complete all as specified and directed.

Supply & fixing rotating rectifier assy Diodes (set of 6 Nos), complete all as specified and directed.

M&L for dismantling, opening of diesel engine cylinder head, removal of unservieable worn out spare parts, cleaning of all components, reboring of cylinder on lathe machine, after reboring honning process will be carrred out,replacement of all spare parts and gaskets as per manufacturer spare part kit, re-assembling of complete engine setting, timing setting for the capacity of 40 to 62.5 KVA DG set complete all as specified and as directed. Note:- Spare parts will be measured and paid seperately under respective item of BOQ.

Supply only Piston ring set suitable for 40 to 62.5 KVA DG set of existing make complete all as specified and as directed.

Supply only Cylinder liner ‘O’ ring kit suitable for 40 to 62.5 KVA DG set of existing make complete all as specified and as directed.

Supply only Main bearing set suitable for 40 to 62.5 KVA DG set of existing make complete all as specified and as directed.

Supply only Oil pump assembly with drvg gear suitable for 40 to 62.5 KVA DG set of existing make complete all as specified and as directed.

Supply only Valve (inlet and outlet valve) suitable for 40 to 62.5 KVA DG set of existing make complete all as specified and as directed.

Supply only Head gasket suitable for capacity of DG Set 40 to 62.5 KVA DG set complete all as specified and as directed.

Supply only Head gasket suitable for capacity of DG Set 40 KVA complete all as specified and as directed.

S&F in replacement of Voltmeter 0-500 Volt square or otherwise flush pattern of existing size complete all as specified and as directed.

S&F in replacement of Ammeter any range flush pattern size as existing complete all as specified and as directed.

S&F in replacement of sheet metal enclosure type change over switch on load front handle four pole 415 volts 50 Hz 100 Amps including mounting arrangement of metallic frame work of appropriate section and size on walls or panels complete all as specified and as directed. Note:- Making connections to the electric system, including cutting of cable of any size and type, making end termination by using suitable lugs is included in the rate quoted under this item.

Disconnecting, taking out carefully old unserviceable AVR unit, supply and fixing, connecting and testing new AVR unit suitable for DG set upto 75 KVA capacity, complete all as specified and directed.

Supply & pouring lubrication oil SAE-40 (15 W- 40 grade) all as specified & directed.

Supply and filling of inhibitor corrosion (Fleet-Guard make Coolant) suitable for radiators of 30 KVA to 75 KVA capacity DG set complete all as specified and directed

Disconnecting and taking out the exhaust system of DG set of any capacity and carrying out cleaning of chocked, carbonized exhaust pipe including exhaust. silencer with de-scaling solution, including soldering / gas welding of leakage of pipe. Cutting the rusted portion of pipes including gas welding of pipes assembling the complete exhaust assembly including replacement of gasket, metallic flexible pipe, nut bolts, and testing for making it leak proof and fixing the same in position and testing the system complete all as specified and directed

Supply only ECU: ELECTRONIC GOVERNOR B1, complete all as specified and directed.

Supply only LEAK OFF PIPE FOR FIP & INJECTOR, complete all as specified and directed.

Supply only fuel pump bracket all as specified and directed.

Supply only Gasket Governor set all as specified and directed.

Supply only Ball Bearing all as specified and directed.

Supply only Injector assembly with Nozzles & copper washers, complete all as specified and directed.

Supply only Gasket hose as specified and directed.

Supply only Screen plate assembly as specified and directed.

Supply only Ball screw as specified and directed.

Supply only Seal ‘O’ ring as specified and directed.

Supply only Pump gear fuel as specified and directed.

S&F as in repair stainless steel locking arrangement for DG set canopy gates rating from 30 KVA to 75 KVA complete all as specified and directed.

Supply & fixing in repair Battery Terminals Copper. (Positive & Nagative) complete all as specified and directed.

Supply & fixing in repair Battery Copper cable Red with plug complete(1 Mtr Length), complete all as specified and directed.

Supply & fixing Battery Copper cable Black with plug complete (1 Mtr Length), complete all as specified and directed.

M&L Earthing complete with GI earth plate electrode 600 mm x 600mm x 6.3 mm thick burried directly in ground vertically to a depth not less than 2.25 m below ground level with the top edge of earth plate at depth not less than 1.5 m below ground level connected to galvanised iron strip 25 x3.15 mm earthing lead by means of bolts, nuts, check nuts and washers protected by 15mm bore light grade GI pipe, funnel with 20mm bore GI medium grade pipe for watering, wire mesh, including concrete pit in PCC (1:3:6) type C-1, pre-cast RCC 1:2:4 type B-1 cover slab of size 350x350x50mm reinforced with 8mm dia TMT steel bars @15cm centre to centre both direction and 10mm dia MS handle of suitable size, charcoal or coke and salt in alternative layers,necessary excavation & earth work in soft/loose soil all as shown in Electrical Plate No 3 of MES Schedule Part I and testing complete all as specified and as directed.

Fixing in repair of existing aluminium strip 25mm x 3.15 mm with saddles and fixings screws etc for roof conductors and down conductors above ground complete all as specified and directed

M&L of aluminium strip 25mm x 3.15 mm with saddles and fixings screws etc for roof conductors and down conductors above ground complete all as specified and directed

Fixing in repair of existing GI strip of size upto 32mm x 6 mm with saddles and fixings screws etc for roof conductors and down conductors above ground complete all as specified and directed

M& L for Air termination, Single pointed aluminium rod 12mm dia and 300 mm long with base plate welded at bottom of termination rod 10 cm long fabricated out of 25 x 3 mm thick flat iron along with 9 mm dia fixing fasteners (wooden block) complete all as specified and directed.

Fixing In repair of Air termination, Single pointed aluminium rod 12mm dia and 300 mm long with base plate welded at bottom of termination rod 10 cm long fabricated out of 25 x 3 mm thick flat iron along with 9 mm dia fixing fasteners (wooden block) complete all as specified and directed

S & F GI tube light grade of 50 mm dia bore galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors as directed and specified by Engr-in-charge .

M& L for test point terminal block made out of gun metal or phosphorus bronze size 75x 75x25mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hex head screw complete all as specified and directed

Fixing in repair of test point terminal block of any type as per existing at site complete all as specified and directed

Suppy, Installation, testing & commissioning of maintenance free chemical earthing system comprising of 17mm dia copper bonded rod 3 mtr long horizontally pre welded T-terminal rod with provision for connection size of 50 x 150mm long, 6mm thickness with equal space either side, with 12mm dia hole of 02 numbers each on either side of the terminal clamp with 250 microns (average) coating thickness, tested and certified by CPRI India alongwith 50 Kg earth energizer compound and 10 litres earth resistance reducing liquid. The above mentioned rod shall be installed in 4-6 inch bore, 12 feet depth with a distance of minimum 3 meters between each installation complete all as specified and directed.

Disconnecting and taking down repairable LED type street light fitting of any type and capacity and make from existing 9 metre /11 metre pole for checking to find out the defects cleaning the glass and prefix cover, repair/replacement of spare parts including necessary wiring etc for making the fitting in serviceable condition and refixing in original position, testing etc complete all as specified and directed. Note : (i) The Spare parts will be measured and paid separtely. (ii) All type of T&P for repairing of street light should be provided by the contractor at own arrangememt.

Supply and fixing in replacement of LED driver 240Volt 50Hz for 60 to 90 watt LED fittings complete all as specified and directed.

Supply and fixing in repair LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp required to be fitted on High Mast Pole in replacement to U/S flood light all as specified and directed.

Suplying and fixing 1100 volts grade heavy duty 16 Sq mm two core cable PVC insulated aluminium conductor, served with inner sheathing of PVC sheathed in service conections suspended by insulating hangers, one twin core cable flat or circular, complete all as specified and directed.

All as per item No 71 above but 10 Sqmm 2 core, complete all as specified and directed.

Supply and fixing in repair LED Street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp, suitable GI Pipe bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply & fixing in repair street light pole cable junction box with terminals IP-66 weather proof for outdoor installation with metric knockouts for cable entry and the box made out of thermal plastic material suitable for 16 sqmm cable including cable glands,clamps bolts, nuts duly painted complete all as specified & directed.

Supply & fixing in repair 3 core 1.5 sqmm PVC insulated and FR PVC round sheathed copper conductor flexible 1100 volts for connection from cable Junction Box to street light fittings.

Supreme Constructions (BID ID -3498544)

Bhupindra Traders (BID ID -3497841)

JAWAHAR CONSTRUCTION COMPANY (BID ID -3497697)

SATIJA BUILDERS (BID ID -3498932)

B.L. Chaudhri and Co. (BID ID -3499211)

M/s Surjit Singh and bros (BID ID -3499488)

M/S Pee Kay Builders (BID ID -3497795)

Kissan contractor and engg works (BID ID -3497788)