SPECIAL REPAIRS TO BUILDING NO P 80 P 85 ORs MD ACCN OF TB I AT MEANEE LINES MEG AND CENTRE UNDER GE NORTH BANGALORE

Amount

B/R WORKS

Dismantling of AC Sheets of any description as in roof covering including ridge, wind tie etc., complete all as specified and directed.

Dismantling single layer Mangalore pattern or similar tiles as in roofing complete all as specified and directed.

Dismantling single layer Mangalore pattern or similar tiles portions bedded in cement mortar as in roofing complete all as specified and directed.

Dismantling timber scantlings 40 sq.cm and over in section, in any position in unframed work all as specified and as directed.

Dismantling battens for tiles, shingles etc, of any size including tilting fillets spaced exc. 15cm complete all as specified and as directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Rolled mild steel work as in tubular trusses, purlins etc., including special shaped washers etc., complete using ERW or incduction butt weld tubes and painted with one coat of zinc chromate primer complete all as pecified and as directed.

Rolled mild steel as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connected plates of Fe-410W (Gde E-250) complete all as specified and directed.

Rolled Mild steel work as in hand rails, half round or other stock section or core for wooden hand rail straight portion, drilled and counter shunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as specifed and as directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tenisile strenth of 550 Mpa as in roof covering cladding to wall, pre fixed with self taping screwes as specified and as directed.

Demolition of brick work or stone / PCC /boulder masonry built in cement mortar or lime mortar including all quions, arches, pillars but excluding ashlar facing, dressed stone work of any description all as specified and directed.

Demolition stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar

Taking down cement plaster of any description hacking for key or raking out joint on old brick work / stone / concrete surfaces complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the the premises complete all as specified and as directed.

Demolition of cement concrete un reinforced and pavings not exc. 15 cm thick below or above ground level complete all as specified and as directed.

Demolition of Reinforced cement concrete, reinforcement cut as required to facilitate demolition in roof, floors other than ground floors, beams, staircase, landing, chajjas and similar suspended work complete all as specified and as directed.

Precast cement concrete block masonry, type C1 (1:3:6) using 20mm graded stone aggregate with solid blocks, exc. 10 cm in width and setting in cement mortar (1:6) complete all as specified and as directed.

Precast cement concrete solid building blocks type C1, (1:3:6), using 20mm graded stone aggregate, 10cm thick with plain or interlocking joints as directed set in cement mortar (1:6) complete all as specified and directed.

Brick work with sub class 'B' bricks built in CM(1:6), straight or curved on plan exc 6 mtr mean radius, using old size bricks complete all as specified and as directed.

Brick work (except bricks)with sub class 'B' bricks built in CM(1:6), straight or curved on plan exc 6 mtr mean radius, using old size bricks complete all as specified and as directed.

Reinforced Cement Concrete (nominal mix), type B-1, (1:2:4) using 20mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

Steel form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc rough finished flat concrete surface complete all as specified and directed.

TMT steel bars 10mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.

TMT steel bars 8mm dia, cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Plain Cement Concrete, type B0, (1:2:4), using 12.5mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges in chajjas etc complete all as specified and directed.

15mm thick rendering on brick or concrete surface in cement mortar (1:6) and finishing the surface with even and smooth without using extra cement complete all as specified and directed.

Rendering 15mm thick in CM(1:4) mixed with water proofing compound as per manufacturers instructions finishing the surfaces even and smooth without using extra cement including necessary scaffolding complete all as specified and directed. NOTE:- WPC will be measured and paid separately under relevant items.

Supply only integral liquid water proofing compound all as specified and as directed.

Plain Cement Concrete (1:4:8), type D-2 using 40mm graded stone aggregate as in sub base to floors, 75mm thick complete all as specified and as directed.

Plain Cement Concrete (1:2:4), type B0 using 12.5mm graded stone aggregate as in floors 25mm thick, as in sub base to floor complete all as specified and as directed.

Non skid ceramic coloured tiles 7-8mm thick(square/rectangular) area of each tile exceeding 0.06 Sqm but n.exc . 0.11 Sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

Glazed coloured ceramic tiles as in vertical surfaces 300x450x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including backing coat 10mm thick in CM (1:4) on fair faces of brick work or concrete surfaces complete all as specified and as directed.

Matt finished non skid ceramic coloured tiles 7-8mm thick (square / rectangular) area of each tile exceeding 0.18 Sqm but n.exc . 0.38 Sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

All as per Sl Item No. 1.034 here in before but in skirting over 10mm thick backing coat in CM(1:3).

Preparation of new or previously untreated steel and iron surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel over a coat of red oxide primer, complete all as specified and directed.

Preparation of newly plastered surfaces of wall and applying two coats of oil bound emulsion distemper over a coat of primer including 2mm thick wall care putty with smooth finished surfaces complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying two coats of cement based paint over a coat of primer all as specified and as directed.

Taking down chowkat (without taking off shutter from the frame) area not exc. 1.5 sqm each including making good the disturbed surface in PCC (1:2:4) type B0 or CM (1:3) all as specified and as directed.

Taking down chowkat (without taking off shutter from the frame) area exc. 1.5 sqm but not exc. 4.00 sqm each including making good the disturbed surface in PCC (1:2:4) type B0 or CM (1:3) all as specified and as directed.

Box type Steel windows/ventilators double side shutters (windows side hung type, ventilators top hung type) pressed steel frames made out CRC Sheet of 80x60x1.25mm double rebated, shutters box type made out of CRC Sheet of 40x20x1.0mm, windows & ventilator shutters shall be of glass and gauge type, fixed with box type hinges, aluminium die cast handles for glass shutters, Iron flat type handles for mesh shutters, telescopic stays, etc complete all as specified including 12mm square guard bars/grill welded with steel frame (100c/c horizontically) all as specified and directed by Engineer-in-Charge. NOTE: (i) Payment under this item will be make combined for steel frames, steel shutters and Guard bard/Grill, However unit rate quoted shall deemed to include cost of beading, fittings such as handles, hinges,Telescopic stays, locking arrangements. (ii) 4 mm thick sheet glass and wire mesh be measured and paid separately. (iii) Weight of Grill/Guard Bars, handle,hinges and locking arrangements shall not be accounted for payment purpose . (iv) All Windows/Vent design as per CECZ TD drg No 539.

Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed.

4.0 mm thick sheet glass, ordinary quality and glazing with oil putty and glazing clips in metal frame and second class hard wood beading in wooden frames in squares not exceeding 0.5 sqm in each pane all as directed.

1.25 mm thick pressed steel frame of size 125 x 60mm suitable for doors with one ore more rebate including necessary fixing lugs, hinges, locks, strike plate etc complete all as specified and as directed.

1.25 mm thick pressed steel frame of size 105 x 60mm suitable for doors with one ore more rebate including necessary fixing lugs, hinges, locks, strike plate etc complete all as specified and as directed.

Flush door shutters 35mm thick, factory made as per IS:2202 (Part-I 1999) solid core construction, with block board core with decorative face veneer both faces with lipping/frame to match as per drawing fixed to chowkhats all as speified and directed.

Rolled mild steel framed work as in doors or gates of angle or other sections with gusset plates, rails braces, etc complete drilled for fixing of steel sheeting or other covering, doors etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering, running rails and guides) and hanging ; also fastening and fixing complete all as specied and directed.

Solid PVC door frame, single rebated of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete as sepecified and directed. NOTE:- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life.

Factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face etc., complete all as specified and as directed.

Butt hinges, medium weight, cold rolled mild steel 100mm long and fixed to door frame and shutters duly welded / screwed complete all as specified and as directed.

Butt hinges stainless steel 100mm long and fixed to door frame and shutters duly welded / screwed complete all as specified and as directed.

Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and as directed.

Aluminium anodised tower bolt 150mm long of extruded section etc complete all as specified and as directed.

Aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed.

150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed.

150 mm long floor door stopper of aluminium alloy powder coated, with hard drawn steel spring all as specified and as directed.

Mild steel 300mm long, ordinary rat tail rod pattern springs,including roller and roller plate complete all as specified and as directed.

Taking up or down existing 15 mm dia steel tubing and connections all as specified and as directed.

Taking up or down existing 20 mm dia steel tubing and connections all as specified and as directed.

Taking up or down existing 25 mm dia steel tubing and connections all as specified and as directed.

20mm dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings, fixed to wall, ceiling or laid in floors complete all as specified and as directed.

20mm dia medium grade Galvanised iron tubing with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed

25mm dia medium grade Galvanised iron tubing with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed

Dismantling water tanks and removing to store (exc. 250 and not exc. 500 ltr capacity) complete all as specified and as directed.

Rotational moulded polythene water storage tank (cylindrical vertical with closed top) with ISI mark embosed on it, hoisted and fixed in position complete all as specified in SSR part I capacity of tank 500 ltrs complete all as specified and as directed.

Fixing only rotational moulded polythene water storage tank (cylindrical vertical with closed top) with ISI mark embosed on it, hoisted and fixed in position complete all as specified in SSR part I capacity of tank 500 ltrs complete all as specified and as directed. NOTE:- Water tanks as obtained from Sl Item No. 1.064 shall be reused.

20mm dia Ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed(Min weight 20mm-210 gms) all as specified and as directed.

Gun metal gate or globe valves 20 mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

Gun metal gate or globe valves 25 mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

Vitreous china wash basin white, flat back, size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but including brackets, 32 mm bore waste stainless steel coupling and LDPE pipe 600 mm long fixed in repairs complete all as specified and directed.

Vitreous china wash down water closet pan (pedestal pan) including fixing bolts, flush pipe anti syphonage pipe, plastic water closet seat black, closed pattern with flat bottom and cover, mild steel chromium plated or aluminium hinging device etc complete of cera model cat pt no. 2008 fixed in repairs complete all as specified and as directed.

Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC(SWR) 'P' or 'S' trap connecting to flush pipe and to anti syphonage pipe, etc. complete including making good to floor fixed in repairs complete all as specified and directed.

PVC valveless, syphonic action type, flushing cistern, Duo flush cistern 10ltr capacity,low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever, fixed in repairs complete all as specified and directed. (Cat No-502 of Prayag or equivalent in any approved make as in CA)

Kitchen sink with drain board overall size 915x460mm, bowl size 410x330x160mm made out of stainless steel 1mm thick kitchen or laboratary sink with plugs, washers and waste including bedding in mortar on to dwarf wall, fixing cantilever brackets and connecting union pipes complete in repairs including taking down the existing sink complete all as specified and as directed.

Brass chromium plated wall mixer for mixing hot and cold water screwed down for iron pipe and fixed in repairs complete all as specified and directed. MAKE:- Cat No-PIS-75H of Neptune series of Prayag or equivalent make as specified in PS.

15 mm dia pillar taps swan neck type, chromium plated cast copper alloy fancy type complete fixed in repairs all as specified and as directed. MAKE:- Cat No PIS-14H Neptune series of Prayag or equivalent make as specified in PS.

Brass chromium plated overhead shower rose 100 mm size with or without swivel joints, any size, including fixing to steel pipe or union fixed in repairs complete all as specified and as directed. MAKE:- Cat No BS-67 Marcus series of Prayag or equivalent make as specified in PS.

15mm dia angle cock, chromium plated cast copper alloy screwed down high pressure with capstan head handle screwed both ends or for unions etc., fixed in repairs complete all as specified and as directed. MAKE:- Cat No PIS-10H Neptune series of Prayag or equivalent make as specified in PS.

Bib Cock 2 way double handle with brass chromium plated, with flange fixed in repairs all as specified and as directed. MAKE:- Cat No-PIS-12H Neptune series of Prayag or equivalent make as specified in PS.

Brass chromium plated long body bib tap 15mm dia with CP flange fixed in repairs all as specified and as directed. MAKE:- Cat No-PIS-08H Neptune series of Prayag or equivalent make as specified in PS.

Health faucet, brass body with 1mtr SS braided tube and wall hook complete all as specified and as directed. MAKE:- Cat No-BEA-41/BEA-85 of Prayag or equivalent make as specified in PS.

Towel rail stainless steel glossy finish fixed in repairs complete all as specified and as directed. MAKE:- Cat No-BA10S of prayag or equivalent make as specified in PS.

Towel ring, brass body, glossy finish fixed in repairs complete all as specified and directed MAKE:- Cat No BA-02 of Prayag or equivalent make as specified in PS.

Soap dish chromium plated brass fixed in repairs all as per Cat Part No BA-45 of Prayag or equivlaent makes fixed to wall as per manufacturers instructions all as specified and as directed.

Peg set of six all as per Cat No BEA 30 of Prayag or equivalent make in PS fixed to wall in repairs as per manufacturers instructions all as specified and as directed.

PVC connections 15 mm size with PTMT nuts of length 450 mm fixed in repairs all as specified and as directed.

75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement. complete all as specified and as directed.

Grating doom 100 mm dia of PTMT fixed in repairs complete all as specified and as directed.

110 mm bore PVC (SWR) pipes, type 'B' single socketed in any length with rubber ring joints fixed to wall including PVC clamps and necessary fittings fixed in repairs complete all as specified and as directed.

75 mm bore PVC (SWR) pipes, type 'B' single socketed in any length with rubber ring joints laid in trenches and necessary fittings fixed in repairs complete all as specified and as directed.

110 mm bore PVC (SWR) pipes, type 'B' single socketed in any length with rubber ring joints laid in trenches and necessary fittings fixed in repairs complete all as specified and as directed.

PVC (SWR) bends type 'B' of any radius, 75mm dia complete all as specified and directed.

PVC (SWR) bends type 'B' of any radius, 110 mm dia complete all as specified and directed.

75 mm bore PVC (SWR) junction single (single T), type 'B' equal or unequal complete all as specified and as directed.

110 mm bore PVC (SWR) junction single (single T), type 'B' equal or unequal complete all as specified and as directed.

110 mm bore PVC (SWR) branch piece (single Y), type 'B' equal or unequal with access door complete all as specified and as directed.

75 mm bore PVC (SWR) branch piece (single Y), type 'B' equal or unequal with access door complete all as specified and as directed.

PVC (SWR) branch piece, type 'B' double (double Y) equal or unequal 110mm dia, type 'B' with access door fixed in repairs complete all as specified and as directed.

PVC (SWR) branch piece, type 'B' double (double Y) equal or unequal 75mm dia, type 'B' with access door fixed in repairs complete all as specified and as directed.

PVC (SWR) vent cowl 110 mm dia, type 'B' all as specified and as directed.

Cutting into existing manholes for connecting new drains, internal dia of pipe 150 mm, making good to pipe and rendering, cutting out existing benching for and foring branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 smoot finished, and re-forming benching as required etc complete all as specified and as directed.

4.0 mm thick forested glass, ordinary quality and glazing with oil putty and glazing clips in metal frame and second class hard wood beading in wooden frames in squares not exceeding 0.5 sqm in each pane all as directed.

E/M WORKS

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including fixtures and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fittings etc., removing materials to stores for keeping in safe custody or for offering credit and making good disturbed surfaces of walls / floors to match the existing surface complete all as specified and as directed.

Point wiring concealed with PVC insulated and unsheathed cable FRLS single core multi stranded copper conductor 1.5 sq.mm size, 1100 volts grade cable conforming to IS-694 1990 drawn in and including PVC rigid non metalic conduit medium grade concealed in walls conforming to IS-9537 with all accessories including MS terminal boxes of 1.6 mm thick concealed on wall with 3mm thick masonite laminated sheet top cover fixed with steel screws for mounting switches, sockets, regulator etc including 1.5 sq.mm single core PVC insulated FRLS unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for :- (a) One light or fan point controlled by one 5 Amps switch one way.

(b) One 3 pin socket outlet point 5 Amps on independent board.

(c) One 3 pin socket outlet point 5 Amps on same board with other switches.

(d) One bell/buzzer point controlled by one push button on the same board with other switches or independent place.

All as per Sl Item No 2.002 here-in-before but with 2.5 sq.mm size single core multistranded copper conductor cable for 6 pin 15 Amps switch socket combination outlet on independent board with 2.5 sq.mm PVC insulated and unsheathed copper conductor as earth wire and connected to earth dolly.

Switch Piano, flush type, 5 Amps, 240 Volts single pole, one way with ISI marked complete all as specified and as directed.

Switch socket combination 3 & 2 pin, 5 Amps, 240 Volts, flush type multipurpose controlled by one switch all as specified and as directed.

Switch socket combination 2 in 1, 3 pin and 2 pin, 5 and 15 Amps flush type, universal complete all as specified and as directed

Bell push, flush type, single pole, one way, 5 Amps, 230 volts AC complete all as specified and as directed.

Ceiling rose surface bakelite 65x50mm three terminals including supply and fix PVC square block complete all as specified and as directed.

Door bell electronic, bul-bul music type, 230 volt AC complete all as specified and as directed

Fan regulator electronic,5 step & socket type 230 volts, suitable for 1200/1400mm sweep ceiling fan complete all as specified and as directed.

Replacement of angle holder PVC / polycarbonate type all as specifeid and as directed.

LED batten fittings, 20 watts, 6000K, (4 feet long), suitable for indoor applications wall mounted with extruded aluminium heat shink provision, efficient heat dissipation and integrated electronic driver, industrial batten type, powder coated top cover, with bipin holders, connector block , lamp etc., complete all accessories internally pre wired all as per Bajaj, Cat No.BCLAB 20 WH LED P or techno commercially equivalent makes specified in PS including connecting up twin core twisted flexible copper conductor cable all as specified and directed.

LED tube light fittings, 10 watts, 6000K, (2 feet long), wall mounted with extruded aluminium heat sink provision, efficient heat dissipation and integrated electronic driver, industrial batten type, powder coated top cover, with bipin holders,connector block, lamp etc., complete all accessories internally pre wired all as per Bajaj, Cat No.BCLSB 10 WH or techno commercially equivalent makes specified in PS including connecting up with twin core twisted flexible copper conductor cable all as specified and directed.

LED Lamp suitable for angle holder, 240 Volt, 14/15 Watt all as specified and as directed

Sub main wiring concealed with 2 runs of 4.0 sq.mm, single core, PVC insulated & unsheathed cable conforming to IS-694, FRLS, 1100 volts with copper conductor multi stranded drawn through and including non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied concelaed in walls alongwith one run of 4.0 sq.mm single core PVC insulated & unsheathed copper conductor FRLS cable as continuous earth wire dolly and connecting to existing main switch board / distribution board of the building as ordered and testing on completion including taking down old submain wiring with any type of conduit complete all as specified and directed.

Replacement of sheet metal enclosure (ISI marked) distribution board TPN 4 way, 415 Volts, horizontal type, double door, for housing MCB and fixed flush in wall surface, and tested on completion complete all as directed.

Replacement of Sheet metal enclosure (ISI marked) distribution board for 240 volts, SPN 8 way horizontal type, double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete all as specified and as directed.

Replacement of MCB single pole 6 to 32 Amps 240 volts, 10 KA rupturing capacity providing in DB complete all as specified and as directed.

Replacement of MCB single pole and neutral 32 to 63 Amps 240 volts, 10 KA rupturing capacity providing in DB complete all as specified and as directed.

Replacement of MCB TPN 63 Amps, 415 volts, 10 KA rupturing capacity providing in DB complete all as specified and as directed..

Taking down the ceiling fan of any type and size by disconnecting the eletrcical connections, dismantling the blade, removing the fan etc deposited to the store all as specified and as direceted.

Hanging only the ceiling fan including cleaning, greasing, servicing, painting with white enamelled paint and carry out the necessary repair works for the smooth running of ceiling fan all as specified and as directed.

Earthing complete with galvanised steel plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge not less than 1.5 m below ground level connected to earth lead by GI wire 4 mm dia by means of bolts nuts, check nuts, washers made out of galvanised iron connected to main switch all as shown in elect plate No 3 of MES SSR Part -I includingn excavation and earth work in any type of soil,funnel, 20 mm dia light grade GI watering pipe with chamber of PCC 1:3:6 type C1 40mm thick of size 450mm x450mm (1:2:4) type B1 for cover slab reinforced with 8mm dia TMT bars 10cm c/c both ways and with 6mm MS hook etc complete all as specified including testing on completion all as specified and directed.

LED building security light fittings 25 Watts, housing made of die cast aluminium in grey finish with clear acrylic and cast aluminium pipe mounting attachment, IP-66 degree of protection with all accessories and pre wired complete including PVC three core flexible copper conductor cable form ceiling rose to connector of fittings including GI bracket made of GI pipe light grade 25/40 mm dia 1.0 mm long bent in to shapes fitted to the wall with GI clamps of size 25 x3 mm fixed in repairs all as specified and as directed.

Suresh painters