REPAIR REPLACEMENT OF LT UNDERGROUND CABLE FOR UPS ROOMS GARDEN LIGHTS ALONGWITH PROVIDING OF RECD LT PANEL AND CONNECTED ALLIED WORKS AT VRDE TECH AREA AND NCAT AREA AHMEDNAGAR

Material and labour for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of following complete including connection with panel with suitable thimble and all connected items complete all as specified and as directed including taking down existing old cable. (a) 25 sqmm 4 core.

(b) 16 sqmm 4 core.

(c) 10 sqmm 4 core.

(d) 10 sqmm 2 core.

(e) 6 sqmm 2 core.

Excavation for cable trenches in any type of soil, depth upto 1.2 m including dressing of sides lift upto 1.5 mtr, including getting out the excavated soil, refilling with sand or good soil after laying of cable / pipe etc. in layers of 20 cm, ramming, watering and and disposal of surplus excavated soil as directed, within a lead of 50 m.in all kinds of soil within a lead of 50 metres complete all as specified and as directed.

Supply and laying 50 mm bore HDPE double wall corrugated (DWC) pipes confirming to IS 16098 complete laid in ground /floor/ wall complete all as specified and as directed.

M&L for GI pipe light grade 80 mm dia confirming to IS 1239 fixed to pole with MS clamps of suitable size nut & bolts/ laid in trenches complete all as specified and as directed including taking down old pipe.

M&L for GI pipe light grade 50 mm dia confirming to IS 1239 fixed to pole with MS clamps of suitable size nut & bolts/laid in trenches complete all as specified and as directed including taking down old pipe.

M&L for GI pipe light grade 40 mm dia confirming to IS 1239 fixed to pole with MS clamps of suitable size nut & bolts/laid in trenches complete all as specified and as directed including taking down old pipe.

Excavation for cutting/ boring RCC/ bitumen road for laying of underground cable of any size and making good with PCC complete all as specified and directed.

Supply, installation, testing and commissioning of Retrofitted emmision control device (RECD) approved by CPCB for family of DG set and should have COP suitable for 75 kVA Diesel Generator set of any make complete all as specified and directed and having following specifications:- •DG safety Alarm system included •Material Construction - SS304 •Temperature Indication and monitoring •Pressure Indication and monitoring •PM Capture/PM reduction capacity 85-90% •High Heat Resistance •Low exhaust Resistance •Easy to Install. * Durability period should be 4000 hrs or 12 years whichever is earlier

Make/ Manufacturer: Cummins Technologies India Pvt Ltd/ Inventive Gas Equipment / PI Green Innovations Pvt Ltd/Novorbis Itus Pvt Ltd Note: (i) Emission test report of engine before and after installation should be submitted by the contractor (ii) Device Should be type Approved CPCB for family of DG sets and required (iii) Contractor should submit OEM authorization Certificate (iv) The device including enclosure should include an Oxidation chamber and Passive Regeneration Trap. A manual valve be given after the first stage (Oxidation stage) and before the second stage (Passive Regeneration Trap) of the DOFF, Noise attenuation is with in the permissible limits, Equipped with mechanical pressure relief system, capturing chamber made of resistance process, treated mild steel etc. as required. (v) The RECD device provided by the seller should be equipped with a remote Data Monitoring system certified by ICAT/ ARAI providing essential information recorded at every 15 minutes, including but not limited to: (a). Energy consumption. (b). Running Hours. (c). warning related to ECD diagnosis for the following conditions: * Complete loss of particulate capture function. * Removal of the ECD system. * Failure of ECD system.

Material and labour for cutting /horizontal boring across bituminous road/ floor for laying of pipe/ cables not exceeding 20cm wide and not exceeding 45 cm deep including refilling with material and, watering well ramming/ compacting and making good with premixed bituminous macadam, 150mm thick complete all as specified and directed.

Supply and fixing in replacement LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. protection complete all as specified and directed.

Supply and fixing in replacement LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed.

As as per herein above item but 100 watt complete all as specified and as directed.

As as per herein above item but 210 watt complete all as specified and as directed.

Supply and fixing in replcement post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed.

Supply and fixing in replacement Cone LED Bollard light 8 to 12 Watts IP 65 protection complete for garden lighting white/warm white 230 Volt AC outdoor type with decorative Bollard light diffuser at the upper portion with impact and corrosion resistant complete with driver and light complete including installation on ground with PCC 30cm x 30cm x 30cm base for necessary fixing complete all as specified and as directed.

Supply and lay PVC Conduit 1" 1.5mm on wall/floor/ground complete with excavation not below 0.15m and fittings like bends, elbow crosses and PVC rectangular block with all connected items complete all as specified and as directed.

M&L for wiring of 1.5 sqmm size (nominal area) PVC insulated three core multi stranded copper conductor cable with all accessories complete all as specified and as directed.

Supply and fix in replacement of cable Junction box thermo plast (weather proof) IP 66, on street light poles made out of thermoplastic of size 300mm x 200 mm x 105 mm size with connector for connecting incomming and outgoing of cable including 01 No of MCB DP 10 Amps to control the pole light circuit and MS brackets made out of 32 x 4 mm flats for fixing the box on post complete with nuts, bolts and washers and suitable size of double compression cable glands for incomming, outgoing of cable Complete all as specified and directed.

S & F in replacement Busbar panel weather proof outdoor type single door, fabricated out of 3.15 mm thick CRCA sheet with epoxy powder coating of RAL-7035 (Siemens Gray) shade with matt finish with seven tank pre treatment process. The Panel shall be compartmentized design totally enclosed, dust and vermin proof, conforming to degree of protection IP-55, Gaskets between all adjacent units and beneath all covers shall be provided to render the joints dust proof. All doors and covers shall be provided with cylindrical panel locks and shall be fully gasketed with neoprene rubber and shall be lockable. The panel shall be provided with aluminium bus bars, 300mm X 40mm X 5mm (thickness) electrolytic grade of adequate rating. The bus bars and Interconnecting links shall be insulated with heat shrinkable PVC sleeve with 4. RYB & black colour coding and fix horizontally. The bus bars shall be supported on unbreakable, non-hygroscopic SMC insulated supports at sufficiently close intervals to prevent busbars sag and shall be housed in a dedicated compartment. including incoming and outgoing cable connection, glands, thimbles All joints and connection shall be done with galvanised or codmium plated high tensile nuts, bolts and washers. The panel shall be provided with 04 Nos 25mm x 25mm x 3\mm thick angle iron supports of not less than each .3 mtr height duly painted with anti corrosive black paint and grouted on wall (at Sudan Dome)and suitable fixing arranement as per site requirement. The overall size of the Busbar panel shall be 350mm x 200mm x 400mm (LxBxH). including PCC 1:3:6 complete all as specified and as directed.

M&L for earthing with galvanised steel earth plate electrode 600 x 600 x 6mm thick buried directly in ground earth pit not less than 2.25M deep below ground level with top edge of the plate not less than 1.5M below normal ground level connected to GI Earth wire 4 mm by means of nuts, bolts, checknuts, washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part I connected to earthing test point including excavation/ earth work in any strata removal of surplus earth, GI pipe for watering and funnel, PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 in cover slab with 40mm dia light grade GI protection pipe and 20mm dia light grade GI pipe for watering complete all as specified and as directed.

Supply and fixing in replacement of mild steel 3 Meter Decorative Garden light poles double bracket for gardens including borage NX series decorative luminaire 60 watt, 3000K cool white/warm white with die cast aluminium with UV stabilized clear PC diffuser with decorative crown complete with exacavation work and PCC foundation work 1:2:4 of adequate size for installed of installed of mast pole complete all as specified and as directed.

Supply and erection in replacement of steel tubular swaged poles 9.0 metre long, type 410 SP-31 in true verticle position complete with cast iron base plate, final taper plug, bolts, nuts and screws, pole cap, etc. confirming to IS-2713 of 1980 including PCC (PCC for base, planting depth and Coping), painting with two coats of black bituminious paint throughout internally and externally upto the planting depth and the remaining portion of exterior surface shall be painted with two coats of aluminum paint over a coat of red oxide primer after necessary preparation of surfaces and numbering to be done in black synthetic enamel paint complete all as specified and as directed.

S&F street light bracket in replacement of length 1.20 meter made of GI pipe medium grade 25 mm bore bent to shape to fixed on LT poles including MS clamps nuts bolts etc complete all as specified and directed.

Please Enable Macros to View BoQ information