MAINTANANCE OF MAP ACCN IN DOMESTIC AREA OF 11 BRD UNDER GE AF OJHAR

Taking down cement plaster of any description including racking out joints, hacking for key scrubbing down with water etc and removal of entire debris as ordered outside MD land complete all as directed.

Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for & removal of entire debris as ordered outside MD land complete all as directed.complete all as specified

Demolition of reinforced cement concrete in any position like roofs, floors other than ground floors , beam , staircases , landings , chajjas,projections, facias and similar suspended work or reinforcement cut as required to facilate demolition for portions ordered to be dismanttled up to 15 m height from ground level including forwork and necessary saftey measures as ordered & removal of entire debris as ordered outside MD land complete all as directed.complete all as specified. (Note : (i) Old reinforcent obtained through demolition shallbe credited. (ii) Quoted rate is deemed to be inclusive of scafloding & safety measures).

Dismantling floor, hearth or wall tiling inluding cement mortar bedding (but not backing), stacking serviceable tiles at site and removal of entire debris as ordered outside MD land complete all as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sq. m m each complete all as specified and directed.

Taking down steel tubing of 15 mm dia bore and connections from walls and cellings or laid in floor including cleaning for refixing in same position (walls , ceiling, floors etc).complete all as specified and as directed.

All same as per item No 6 here-in-above but 20 mm bore of pipe -do- .

Demolition and breaking up drain pipes (Salt glazed ware , AC or RCC or PVC Pipes) of any dia including all fittings any size all as specified & as directed .

M&L for drilling holes for pipes etc in cadappa/granite including RCC slab nexc 25mm dia and n exc 150mm depth without damaging the existing slab complete all as directed.

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm single rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make : ECHON/Sintex/Rajshree/Navaratan

S&F 28-30 mm thick Prelaminated Flush WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded side with wood grain texture with density not less than 650 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified

Repairs to aluminium windows /Ventilator any description and size including taking down from frames for realignment and tightening including adjusting the Shutter and Window /Ventilaotr Frame refixing shutter in same opening with all necessary repairs /refixing ,including replacement of damaged wiremess and tinted glass , cleats ,glazing clips , rubber packing ,aluminium beading , screws etc. complete all as specified and as directed by Engineer-in-charge. ( work shall be carried out in MD Qtrs/ OTM accns in different locations of Domestic/ Technical area as per site requirements upto 4 storieyed building) Note :- Wirmess and Tinted glass replaced under separate items.

S&F 100 mm long stailess steel Butt hinges, with mild steel hinge pin, bright polished and fixed, typeB-11 complete all as specified and as directed.

S&F 150 mm long Extruded stainless steel handles designer type, fabricated type polished complete all as specified and as directed.

S&F 150mm size stainless steel barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed.

S & F in Repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.

S & F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed to steel/aluminium window and ventilator fixed with MS beads of standard section ,with SS screws as ordered)compete all as specified as directed.(Note : Work to be carried out in MD Qtrs/ OTM accns in different locations of Domestic/ Technical area as per site requirements upto 4 storieyed building as such quoted rate is deemed to be inclusive for the same).

M&L for Welding in repairs exceeding 2.5cm not exc 5 cm in length (thickness of metal to be welded not exceeding 6mm) including cleaning preparing the surface and holding the members in true position for maintenance of steel items such as gates, grills, doors, windows etc., complete all as specified and as directed.

M&L for 25 mm thick plain cement concrete 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as in floor and finished the surface suitable to receive floor tiles complete all as directed.

M & L for coloured Non skid ceramic tiles 7 to 8 mm thick of colour patteren as approved and as per manufacturers catalouge (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm, in floor etc laid over 15mm thick screed bed with cement mortar 1:6 and set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.

All as in item No. 20 herein before but vertical surface such as dado/ skirting including 10 mm thick backing coat in cement mortar 1:4 complte all as Specified and as directed.

M & L for Non - skid Ceramic tiles 600mm x 600mm 7 to 8 mm thick as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match ,.laid over 10 mm thick screed bed in cement mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed..

All as in item No. 22 herein before but vertical surface such as dado/ skirting including 10 mm thick backing coat in cement mortar 1:4 complte all as Specified and as directed.

M&L glazed ceramic coloured tiles of size 300mm x 600mmx 7mm thick, on verticals surfaces, set and jointed inneat cement slurry including 10 mm thick back coat in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all directed. (Note for item Nos 20 to 24 : i) Quoted rate is deemed to be inclusive of cement screed. ii) Colour of tiles shall be got appproved before incorporation in the work)

M&L Machine cut cudappah stone slab 20mm to 25mm thick over and including 15mm thick cement screed bed in CM 1;6 laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing Complete all as specified and as directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite , laid over and including 15 mm thick screed bedding in cement mortar 1 : 6 all as specified & directed.(Note: Quoted rate is deemed to be inclusive of cement screed.)

M&L for rendering 15 mm thick in CM 1:4 on brick or concrete surfaces or surface other than fair faces brick work, finished even and smooth without using extra cement complete all as specified.

All same as per item No 27 but 10 mm thick in CM 1:6 -DO-

M&L for preparation new finished ceiling surface and applying two coat of oil bound distemper over a coat of primer complete all as specified and as directed .

S& F for 20 mm dia 3-layer PP-RPolypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc.including pressure testing to the satisfaction of Engineer-in-charge.

All same as per item No 30 but 25 mm bore of pipe - do- ( Note for item No 30 & 31 : The quoted rate is deemed to be inclusive for : (i) cutting chases for Concealed the pipe & making good the disturbed surface as per its orginal specifications without any extra cost to Govt. (ii) After the pipes are claid & before concealing in wall , floor , ceiling etc the laid pipes shall be water pressure tested by using Pressure testing machine in presence of EIC once the same is approved concealed work shall be progressed ).

S & F in repairs, vitreous China wash down water closet pan (pedestal pattern), white, including connection to outgoing drain and 32mm dia flush pipe,flushing pipe, anti syphonic pipe with and including white PVC seat and cover closed pattern with flat bottom and MS chromium plated hinging device including provision of 10 ltr capacity low level PVC Flushing cistern, complete including making good damaged/disturbed surfaces complete all as specified and directed.

Fixing only in repairs 10 litres capacity PVC Valveless symphonic action type flushing cistern high / low level white complete with inlet , ball valve float and handle including brackets and telescopic down pipes and jointing with WC complete complete all as specified and as directed.

Fixing only in repairs Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed

Fixing only in Repair 15 mm bore Cast copper alloy CP angle valve type stop cock with flange Complete all as directed.

Fixing only in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets guard and railing 60cm long complete all as specified and as directed. Note ;- All the items needed to fix shelf assembly are included in this above item (exept shelg glass and CP railing )

Fixing only in Repair bib tap long body foam flow with flange of bore size 15mm, cast copper alloy, chromium plated, fancy type, with crutch or butter fly handle screwed down , screwed for iron pipe or for brass ferrule complete all as directed .

Fixing only in Repair viterous china wash hand basin of size 550 x 400 mm, white colour flat back excluding taps, chain and plug and porcelean stopper but including brackets and CP waste fitting and 32 mm PVC waste pipe . complete all as specified and as directed by Engineer-In-Charge

Fixing only in repairs Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) Complete all as specified as and directed by Engr-in-Charge.

Fixing only in repairs 32mm Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed

Fixing only in repairs 40mm Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed

Fixing only in Repair Cast copper alloy CP Concealed stop cock with flange suitable for 15mm bore pipe screwed at both ends or high pressure with Capstan head confirming to Prayag /Saiko/ Parko Complete all as specified and as directed by Engineer-In-Charge.

Fixing only in Repair Brass chromium plated tubular towel rail 20mm dia 60cm long with and including flanges complete all as specified and as directed by Engineer-In-Charge

Fixing only in repairs Stainless steel sink , 1.00 mm thick for kitchen or laboratory , with plug , waste pipe , washer, including cantiliver cast iron brackets , connection union etc overall size 495 x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

Supply and fixing Low density polyethylene pipes (LDPE) of pressure rating 6 kg/ cm2 of 40 mm dia bore for wash hand basin Complete all as specified and directed by Engineer-in-charge.Make:Prayag

S& F PVC (SWR) pipes 110mm dia single, socketed in any length ,with rubber ring joints fixed to walls with MS clamps all as directed .

S&F PVC (SWR) bends 110mm dia

S&F PVC (SWR) branch piece, single (single Y) equal or unequal

S&F PVC (SWR) branch piece, double (double Y) equal or unequal

S& F PVC (SWR) pipes 75mm dia single, socketed in any length ,with rubber ring joints fixed to walls with MS clamps all as directed.

S&F PVC (SWR) bends 75mm dia

S&F PVC (SWR) branch piece, single (single Y) equal or unequal

S&F PVC (SWR) branch piece, double (double Y) equal or unequal

Cleaning & removing all scale & dirt etc from tanks & from mouths of circulating pipes etc including dismantling of existing float valve & refixing the same after cleaning of capacity exc 250 litres & not exc 500 litres with gunny bags, cleaning with fresh water and bleaching powder all as specified and directed

Dismantling existing water tanks of capacity 500 ltrs lowering from its position and removal to store. complete all as specified and directed.

S & F in repairs 20 mm bore float valve of high pressure PTMT with epoxy coated aluminuim rod and high density plastic ball screwed for iron pipe and fixed in tank which situated up to 50 m height buildingincluding necessary ladder for climbing if required .complete all as specified and as directed by Engineer-in-Charge.

S & F in repairs Grating of 125 mm dia stainless steel with waste hole complete all as specified and as directed.

S &F in repairs 4mm thick tinted float gass of approved make and quality, coloured/tinted as specified cut to size, edges ground and fixed with aluminium window/Ventilator frame using PVC/neoprene gasket or with putty and glazing clips, including necessary beading scaffolding, making good to distrubed surface, complete all as specified and as directed.

S&F Stainless steel 25 mm dia curtain rod, bright finish, including set of fixing brackets (wall & end), fixed to wall in repairs,with finols/finnels, connected accessaries, rubber packing, required screws and rawal plugs, complete all as specified and directed.

Dismantling of existing cupboard /Kitchen Shutter , shelves complete all as specified and as directed

M & L for making wooden cabinet below Kitchen platform with following Details :- i) The Cabinet Should frame work of solid wood plastic composite (WPC) having a Front elevation area n exc 3.5 Sqm. ii) The shutter Should be 18mm Factory made 100% solid wood plastic composite (WPC) flush type shutter/shelves of 18mm thickness one side laminated consisting of panel of PVC profile of 18mm ( =+-.07mm ) thick of density 650kg per Cum manufactured by ISO 9000 certified company iii) M & L SS fancy type handles 100mm for kitchen shutter /C3 shutter as approved and qty 1 handle per shutter . iv) Auto closing hinges for door shutter of CB 7 kitchen Shutter of SS 110 degree opening angle, soft closing concealed hinges, ISI marked qty 02 hinges per shutter . v) Internal Shelves:Made from 18mm thick laminated WPC board, laminated both sides (white), fixed to carcass with SS screws and shelf supports WPC Make :- Rajeshri Plasitwood, M/S Maica ,M/s Navratna Special Chenmical and any Approve Make

M & L for making wooden cabinet above Kitchen platform fixed wall having following Details :- i) The Cabinet Should frame work of solid wood plastic composite (WPC) having a sectional area n exc 3.00 Sqm. ii) Back Side:- Made from 12mm thick WPC board, laminated on both sides with white laminate, flush fixed to carcass with stainless steel screws. iii) The shutter Should be 18mm Factory made 100% solid wood plastic composite (WPC) flush type shutter/shelves of 18mm thickness one side laminated consisting of panel of PVC profile of 18mm ( =+-.07mm ) thick of density 650kg per Cum manufactured by ISO 9000 certified company iv) M & L SS fancy type handles 100mm for kitchen shutter /C3 shutter as approved and qty 1 handle per shutter . v) Auto closing hinges for door shutter of CB 7 kitchen Shutter of SS 110 degree opening angle, soft closing concealed hinges, ISI marked qty 02 hinges per shutter . WPC Make :- Rajeshri Plasitwood, M/s Navratna Special Chenmical and any Approve Make

S & F Factory made 100% solid wood plastic composite (WPC) flush type shutter/shelves of 18mm thickness one side laminated consisting of panel of PVC profile of 18mm ( =+-.07mm ) thick of density 600kg per Cum manufactured by ISO 9000 certified company. The thickness of shutter is edge painted by matching colour of PVC lining of plain/prelim coloured PVC sheet using etc complete all as specified and as directed byEngr-in-Charge.

S & F Stainless steel heavy duty telescopic slide/drawer channel 12' to 16" as per site requirment complete all as specified and as directed by Engr-in-Charge.

S & F in repairs Magenatic ISI marked door lock for Kitchen/ cupboard door shutters complete all as specified and as directed

S & F in repairs stainless steel handle of approved make and design made of grade 304 stainless steel 75mm to 100mm length as specified with necessary stainless steel screw and accessories, fixed to kitchen shutter/ drawer/cupbaord shutter in position including drilling complete all as specified and as directed

M&L for 5mm thick POP/Gypsum (Premium Quality) on concrete surface of ceiling ,including taking down old cement plaster and roughening the surface for subsequent coat of POP/Gypsum .complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new plastered walls and applying two coats of weather proof exterior emulsion paint over and including priming coat of exterior primer over white cement based putty including sand papering the puttied surfaces to form an even and smooth surface whereever required over new or untreated plastered surfaces to be applied with fully automatic airless spray machine with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI, by allowing 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.

Fixing only in repairs sheet glass corner shelf assembly consisting of 5.5mm thick sheet glass shelf 30cm wide with chromium plated brackets guard and railing 30cm long complete all as specified and as directed. Note :- All the items needed to fix shelf assembly are included in this above item (exept shelg glass and CP railing )

Fixing only in repairs plastic seat cover white closed pattern with flat bottom andcover with CP hinges for EWC complete all as specified and as directed

Fixing only in repairs plastic seat cover white Anglo indian Pattern with flat bottom andcover with CP hinges for EWC complete all as specified and as directed

Fixing only in Repair PVC connection 15mm size with PTMT nuts, of length 600mm Complete all as specified and as directed by Engineer-In-Charge.

Fixing only in Repair PVC connection 15mm size with PTMT nuts, of length 450mm Complete all as specified and as directed by Engineer-In-Charge.

Fixing in repairs 2 way Bib cock for health faucet with 2 way bib cock of Prayag /Saiko/ Parko. complete all as specified and directed by Engineer in charge

S & F in repairs Health Faucet of approved Make and Quality, made of chromium plated brass body with single lever trigger, including 1.00 to 1.2 Mtr long flexible stainless steel house pipe , wall mounting hook/bracket, required PTMT/ Brass fittings, screwes, rubber washers teflon tape and making connection to existing/New wate supply line, tested and fixed in position, complete all as specified and as directed.d directed by Engr-in- Charge.

S & F in repairs 2 way angle cock for jet spreader with 2 way angle cock of Prayag /Saiko/ Parko or any approved make complete all as specified and directed by Engineer in charge

Fixing only in repairs chromium plated jet spreader for pedestal pattern WC screwed down high pressure complite all as specified and directed by Engr-in- Charge.

Fixing only in repairs 100 mm dia CP brass shower rose swivel type with extension CP rod 15mm dia and 300mm long with connecting rod suitable for 15mm bore pipe .Complete all as specified and directed by Engineer-in-charge.

Fixing only in repairs stainless steel plate rack, made out of 1.00mm thick sheet of size 24"x36"x10" deep, ISI marked, fixed as in repairs complete all as specified and directed.

Fixing only SS Towel ring fixed with and including Chromium plated brass screws complete all as specified and as directed by Engr-in-Charge.

Fixing only in repaire 32/40 mm spring type PVC waste pipe fixed toWHB & Sink etc complete all as specified and directed ( Note minimum length of each pipe should not be less than 0.70RM)

S & F in Repairs15mm Brass CP basin mixer for mixing hot & cold water screwed down for iron/UPVC/CPVC pipe and fixed complete all as specified and as directed by Engr-in-Charge .

S & F in Repairs15mm Brass CP Sink mixer for mixing hot & cold water screwed down for iron/UPVC/CPVC pipe and fixed complete all as specified and as directed by Engr-in-Charge .

S & F in Repairs 15mm Brass CP wall mixer for mixing hot & cold water screwed down for iron/UPVC/CPVC pipe and fixed complete all as specified and as directed by Engr-in-Charge .

Dismantling of existing any type & any capacity water storage tank fixed in any description and stacking at site and S&F new 500 litres capacity (white colour) rotational moulded polythene water storage tank, (cylindrical vertical with close top) triple layer colour white both inside and outside with top cover including PVC float valve high pressure suitable for 20 mm bore of pipe with polythene float, 25 mm union & 25 mm gate valve fixture hoisted and fixed in position where ordered and making necessary connection and testing complete all as directed.

All same as per item No 85 here-in-above but 1000 liters capacity water stroage tank -do-

S & F in repairs 20mm PP-R Ball valves (brass insert) as per requirement of the site complete all as specified and as directed by Engr-in Charge.