RENOVATION RAISING THE COMPOUND WALL,WATER SUPPLY AND SANITARY ARRANGEMENTS FOR SE QUARTERS AT SALEM CORPORATION

Amount

Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls in Brick / stone masonry in Cement mortar walls under 3m high etc Complete Complying with Standard Specification.

Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of Floor finish and dadooing walls in cement mortar with mosaic tiles / glazed tiles / cuddapah slabs etc Complete Complying with Standard Specification.

Cement Concrete 1:5:10 (One Cement, Five sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

Brick work in following Cement Mortar 1:5 using best quality Fly ash bricks of size 23x11x7cm for foundation and basement including curing etc.,complete complying with standard specification.

a) Foundation and basement

b) Ground Floor

Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification.

Providing Cup-board Shutter using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on work.

Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Painting the old wall and ceiling one coat with ready mixed plastic emulsion paint of approved quality including preparation of surface, the rate includes cost of brushes, high scaffolding arrangements, neat finishes, etc., complete complying with standard specification and as directed by the departmental officers.

Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat of over cement plastered wall surface ect., complete complying with standard specification.

Painting Two Coat for old iron work using best quality synthetic enamel paint etc.,complete in all floors complying with standard specifications

Painting Old Wood Work with two finishing coats of Synthetic Enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification.

Polishing the teak wood door with two coats of best French (Lac) polish with approved quality and brand over a coat of bee's waxing including preparing the wooden surface to receive polishing, etc., complete complying as per the standard specifications.

Supplying and fixing in position White / Colour Special Delux Model Glazed Cascade Type Parryware / Hindware / Equivalent Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications.

(The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) with 10 litres capacity flushing tank with all internal dual flush fittings with normal seat cover Wall Fittin gsuch as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete

White glazed European Water Closet with 12.5 litre capacity porcelin flushing tank fixed on to wall

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers.

White Glazed Wash Hand Basin A) Without Pedestal

Supplying and fixing 304L Grade Stainless Steel Netlon Screen with open able type and using Aluminium powder coated outer frame in size of 20x20mm with required size and shape, fixing with necessary PVC handle, hinges, plugs, screen etc., complete

Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary.

Supplying and fixing best approved best quality brass CP Soap tray of size 150 x 100mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works).

Supplying and Fixing of Windows / Doors Curtains with 25mm dia stainless steel rod with fixing of clamps, and Screen cloths including cutting, Stiching, etc complete . The rate excluding of all taxes and includes cost of all materials, labour, transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers.

Supplying Kniting Nylon wire for wooden chairs. The Nylon wire for wooden chairs of size and frame of suitable size with approved design. . The rate inclusive of hardware & fitting charges and transportation to site etc., as directed by the departmental officers.

Supplying and fixing in position Indian make mirror of approved quality and brand PVC / Fibre Glass framed 560 x 864mm mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)

Supplying and fixing in position CP Two Way Bib Cock with Health Faucet arrangement of size 15mm dia inlet and 100mm outlet to the pipe line with necessary cutting, threading and jointing using shellac etc., complete complying with standard specification and as directed by the departmental officers

Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications.

Supplying and fixing in position best quality approved make Stainless Steel Sink 600mmx600mmx200mm including cost of 32mm dia CP waste coupling, 32mm dia PVC waste pipe with rubber plug and chain, 15mm dia brass nipple including fixing the sink in position and testing for leakages etc., complete complying with standard specifications excluding CI brackets.

Manufacturing, supplying Plastic Visitor chair. The chair of size and frame of suitable size with approved design. . The rate inclusive of hardware & fitting charges and transportation to site etc., as directed by the departmental officers.

Manufacturing, supplying Tufflon Sheet for main gate. The Tufflon Sheet of size and frame of suitable size with approved design. . The rate inclusive of hardware & fitting charges and transportation to site etc., as directed by the departmental officers.

Manufacturing, supplying Water Heater. The Water Heater 20 Litres capacity and accessories . The rate inclusive of hardware & fitting charges and transportation to site etc., as directed by the departmental officers.

Manufacturing, supplying UPS with Battrery . The UPS with Battrery capacity and accessories . The rate inclusive of hardware & fitting charges and transportation to site etc., as directed by the departmental officers.

Solid PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter.

Supplying and erecting in position of 25 liters capacity Industrial Model Reverse Osmosis Water-cum- Purifier to deliver Potable Water with World Health Organisation WHO) Standards with following accessories. (a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20” Filter with Housing - 1 No. Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings. The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact

Manufacturing, supplying Mixer. The Mixer with 3 jar and accessories . The rate inclusive of hardware & fitting charges and transportation to site etc., as directed by the departmental officers.

Manufacturing, supplying PRESTIGE SS DLX ALPHA AVACH JUNIOR, HANDI PR CKR and accessories . The rate inclusive of erection & fitting charges and transportation to site etc., as directed by the departmental officers.

Manufacturing, supplying Camp cot. The Cot of size and frame of suitable size with approved design. . The rate inclusive of hardware & fitting charges and transportation to site etc., as directed by the departmental officers.

Manufacturing, supplying Fridge. The Fridge of 235 Litres Capacity . The rate inclusive of hardware & fitting charges and transportation to site etc., as directed by the departmental officers.

Manufacturing, supplying Television. The TV of size 138mm (55') . The rate inclusive of hardware & fitting charges and transportation to site etc., as directed by the departmental officers.

Manufacturing, supplying Dish antana with wire and accessories . The rate inclusive of hardware & fitting charges and transportation to site etc., as directed by the departmental officers.

Manufacturing, supplying DAIKIN AC ATKL50UV16V3 . The AC 1.5 TONE capacity and accessories . The rate inclusive of hardware & fitting charges and transportation to site etc., as directed by the departmental officers.

Supplying, laying and jointing UPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works.

Internal Water Supply Arrangements using UPVC pipes and UPVC specials

a) 25 mm dia UPVC Pipe

b) 32 mm dia UPVC Pipe

Supplying UPVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements

a) 25 mm dia union

b) 32 mm dia union

c) 25 mm dia Elbow

d) 32 mm dia Elbow

e) 25 mm dia Tee

f) 32 mm dia Tee

g) 32 x 25 mm dia Reducer

h) 25 x 20 mm dia Reducer

i) 20 x 15 mm dia Reducer

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.

a) 32 mm dia G.M. Gate Valve

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level

a) 75mm dia PVC soil / waste pipe

b) 110mm dia PVC soil / waste pipe

Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications.

c) 75mm dia PVC Elbow

d) 75mm dia PVC Tee

e) 75mm dia PVC Tee with single door

f) 75mm dia PVC Bend

g) 110mm dia PVC Elbow

h) 110mm dia PVC Tee

i) 110mm dia PVC Tee with single door

j) 110mm dia PVC Bend

Supplying and fixing position PVC Nahani Trap / Floor Trap of the 100 x 75mm with stainless steel gratings sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the PVC pipes, etc., complete complying with standard specification.

Supplying and laying of Interlocking Paver Block Stone 63mm thk. Over a base layer of sand filling incl. Cost of materials laying and Labour charges etc.,

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End (SD-317)

Supply and fixing of 5A / 15A 3 pin combined flush type wall socket with 15A flush type switch concealed in suitable MS box in flush with wall and covered with 3mm thick hylem sheet. (SD-138)

Supply and fixing of 6A indicator on existing module switch box with cover plate in flush with wall. (DATA-F)

Supply and fixing of 1module TV socket(ACVKT) on existing module switch box with cover plate in flush with wall. (DATA-I)

Supply and fixing of 4 feet 20W LED SBT fitting (Higher End) complete with TW round block on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting. (DATA-J)

Supply and fixing of 1200mm (48") sweep AC ceiling fan 5 star rated complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 300mm down rod on the existing fan clamp. (SD-579)

Supply and fixing of 32A DP MCB in sheet enclosure in flush with wall and making good of the concealed portion with earth connection. (DATA-P)

Supply and run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour. (SD-414)

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour. (SD-57)

SWETHALAKSHMI ENGINEERING