Revised Estimate for 01 no. 63 KVA additional dtr at Salapura (Jeevan Acedmy wala) under sheopur (R) D/C of South dn Sheopur.

Laying and Jointing PVC Pipe. Heading

11 KV(45KN) Composite Polymer Disc Insulators

11 KV V cross arm 65X65X6 mm. angle type

11 KV Top clamp 65X65X6 mm. angle type

XLPE Cable 1 core unarmoured 50 sqmm Aluminium conductor 1100 Volts

XLPE Cable 1 core unarmoured 70 sqmm Aluminium conductor 1100 Volts

Additional Erection Charge

63 KVA Conventional Distribution Transformers,BIS Certified Level-II (Old)/Level-I(New).

140 Kg.,8.0 Mtrs. long PCC pole

1100 Volts Grade Arial Bunch XLPE Cable 3X120 + 1X16 + 1X95 Sq mm. Bare Masanger

AAAC Raccoon conductor 0.075 sq. inch (80 sq.mm. Al.Eq.)

D.C. Cross-arms 8 ft centre to center (100x50x6mm) Channel

11 KV D.O. Fuse Unit Polymer type

9 KV Gapless type ( 5KA) Polymer for DTR

Three phase Electronic meter 10-40 Amps. with data downloading facility & box

AAAC Rabbit conductor 0.05 sq. inch. (55 sq.mm. Al.Eq.)

11 KV Strain hardware (T&C type) fittings

H-Beams 152 X 152 mm., 37.1 Kg./Mtr.-11 mtr. Long = 408.1 kg

D.O.Mounting Channel 75x40x6mm

11 KV Pin Insulator Polymer Composit (5 KN)

Piercing connector Type-I for single/three phase (Main 16-50 sqmm tap-off 16-50 sqmm)

Clamp for 140 Kg PCC Pole MS Flat 50x6 mm

Stone Block/Pre cast block for base pedding(450X450X75MM)

Clamps for neutral for AB Cable

Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire

Three Phase Service connection box(Deep Drwan Metal Service Connection Boxes ) with one incoming up to 35 mm2 and 4 no outgoing up to 16 mm2 with insulated multiple outgoing connector-

M.S.Nuts with Bolts

Back Clamp for 140 Kg PCC Pole MS Flat 50x6 mm

Bi-metallic clamps Distribution Transformers Bushing

STAY WIRE 7/3.15 MM.(7/10 SWG)

Aluminium paint

Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG)

Galvanized nut & bolt with washer

Bentonite compound powder

G.I. STRIP 25X3 MM1

Transformer mounting Channel (100X50x6 mm.)

Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay

L.T. Distribution box with Isolator on Incoming with HRC fuse for 63 KVA DTR (200 Amp. Isolator & 6 SP of 60 Amp.)

Red oxide paint

Danger Boards Enamelled 11 KV

Stay set complete without Stay wire 16 mm. (Painted)

G.I.Pipe 40 mm Dia C grade type

Concreting of structures & foundation (1:3:6)

Bi-metallic clamps suitable for 12mm dia stud and 80sqmm AAAC

Trans. Belting with 50 X 50 X 6 mm.angle with two cross fixing channels

Stay Insulators 90X65mm

Complete jumpering of DTR

Back filling of poles with boulders.

Single Phase Service connection box (Deep Drwan Metal Service Connection Boxes )with one incoming up to 25 mm2 and 8 no outgoing up to 10 mm2 with insulated multiple outgoing connector-

Concreting of stay (20 mm / 25 mm) @ 0.3 cmt. per stay

Stay set 20 mm. complete without Stay wire (Painted)

Back Clamps for H-Beam of MS Flat 65x8mm (Each weight 1.92 Kg)

STAY GI WIRE 7/4.00 MM.(7/8 SWG)

Clamp 65X8 mm Flat of MS Flat for H-Beam ( Each weight 3.2 kg)

Aluminium Binding wire and tape

Jointing Sleeves suitable for Raccoon (80Sq.mm.Al. Eq.) AAAC conductor

LT A.B Cable tension clamps (Galvanized)

Earthing for PCC Pole 4.00 mm-8 SWG G.I wire- 0.8 Kg, per pole

Piercing connector Type-II (Main 16-50 sqmm tap-off 16-50 sqmm)

LT A B cable Suspension clamps (Galvanized)

Lumpsum Value

Total value all section

Bifurcation of Erection Value

The Total value of Schedule2

Contractor %

Labour & Transport Amount Shifted Form Company side to Contractor Side

Final amount of Labour & Transport charges (Company side and Contractor Side)

Total Amount Without GST

GST on Transportation@5%

GST on (Material + Labour) @18%

Total Amount With GST

Total Amount For NIT

Please Enable Macros to View BoQ information