GE/ALP (8270B) KOLKATA OF 2023-24

Amount

Cutting openings, through brick walls for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m complete all as specified and directed.

Material and labour brick work with fly ash brick straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.

M & L for brick work with fly ash bricks old size, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed.

Taking down cement plaster on brick or stone wall surfaces including glazed tiles wherever exists including raking out joints, hacking for key and scrubbing down with water complete all as specified and as directed.

M&L for Rendering 20 mm thick in two layers (Top 10mm thick rendering coat mixed with water proofing compound shall be laid over 10mm thcik plastered surface) with CM (1:4) on of brick work or concrete surfaces finished the surface even and smooth without using extra cement to match the existing surface complete in all respect as specified and directed. Note: WPC shall be measured and paid separately

M&L for Rendering 15 mm thick in CM (1:6) on other than fair face of brick work or concrete surfaces and finished the surface fair & even without using extra cement to match the existing surface all complete all as specified and directed.

M&L for Rendering on ceiling 5 mm thick in cement mortar (1:3) on of concrete surface finished even and smooth with out using extra cement complete all as specified and directed.

Supply only Integral water proofing compound complete in all respect as specified and directed.

Taking down shutter and refixing in same opening size of shutter is exc 1.0 sqm not exc 2 sqm and complete all as specified and directed.

Resuring, Easing /adjusting without taking down shutter size of shutter is exc 1.0 sqm not exc 2 sqm complete all as specified and directed.

Taking down of Chowkhat with shutter (without taking of shutter) area exc 1.5 Sqm but not exc 4.0 sqm complete all as specified and directed.

Taking down of Chowkhat with shutter (without taking of shutter) area n. exc 1.5 Sqm complete all as specified and directed.

S & F 2nd H/W plain solid straight chowkhats,wrought framed rebated on the solid,rounded or chamfered put together with glue pinned at joints.

M&L for 30 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specificed and directed.

M & L for Cub-boards shutters made with Particle board 18/19 mm thckness , medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber n frame work fixed with screws to timber frame-work complete in all respect as specified and directed.

S&F 30mm thick 2nd class hard wood gauged & skeleaton shutter, open rebated & prepared to receiv e gauged, ( without sash bar ) eadge of framing plain, chamford or rounded, fitted with cut & mitred beads for securing gauged etc complete in all respect as specified and directed.

M&L for cement concrete type B0 (1:2:4) 12.5 mm graded aggregate as in hold fast block kerbs or mud stops, rounded or chamfered etc comlete all as specified and directed.

S&F for Factory made single extruded WPC(Wood polymer composite) solid door Frames of size 45 x 70mm comprising of virgin PVC polymer of K value 58-60(Suspension grade), calcium carbonate & natural fibres and non-toxic additives fabricated with mitre joints after applying PVC solvent cement and screwd with full body threaded star headed SS screws having minimum frame density of 750 Kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), mimimum compressive strength of 58 N/Sqmm and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof & fire retardant & fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as directed.

S&F for Factory made single extruded WPC(Wood polymer composite) solid flush door shutter of 30mm size comprising of virgin PVC polymer of K value 58-60(Suspension grade), calcium carbonate & natural fibres and non-toxic additives fabricated with mitre joints after applying PVC solvent cement and screwd with full body threaded star headed SS screws having minimum density of 650 Kg/cum, screw withdrawal strength of 1800 N(Face) & 900 N (Edge), mimimum compressive strength of 50 N/Sqmm, modulas of elasticity 850 N/sqmm & resistance to spread of flame of class A category with property of termite/borer proof , water/moisture proof & fire retardant & fixing with SS butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per dirns of EIC.

S&F UPVC ventilator fixed type half portion 4 mm frosted glass and half portion stainless steel wire cloth, 0.63 mm dia of wire and average width of aperture 1.18 mm including fixing of ventilator incl taking down old ventilator complte all as spd and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel/aluminium frames glazed with putty or fixed with beads complete.

S&F 4.8 mm thick Sheet glass, ordinary quality and glazing in square n.exc 0.5 sq. m in each pane fixed to aluminium frame work complete all as specified & as directed.

S & F 4 mm thick figured glass/frosted glass , pin headed type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified & as directed. .

S&F Extruded aluminium alloy handles 75mm long, fabricated type,anodised complete all as specified & as directed.

S&F Extruded aluminium alloy handles 150 mm long, fabricated type,anodised complete all as specified & as directed.

S&F 300mm long sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bots and sliding bolts of extruded or cast aluminium alloy complete all as specified & as directed.

S&FAluminium anodised barrel tower bolts of extruded section with 150 mm long bolt, all as specified .

S&F Aluminium anodised barrel tower bolts of extruded section with 200 mm long bolt, complete all as specified & as directed.

S&F Hinges 125 mm, cast brass, with mild steel hinge pin, bright polished and fixed medium wheight , complete all as specified and directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electro galvanised complete in all respect as specified and directed.

S&F 125 mm long Aluminium handles, cast type, anodised complete in all respect as specified and directed.

S&F 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-22 complete in all respect as specified and directed.

S&F 2nd class hardwood Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each complete in complete in all respect as specified and directed.

S&F for Stainless steel wire cloth having 0.36 mm nominal dia of wire and average width of appreature 1.40 mm and fixed with stainless wire staples complete all as specified & as directed.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates; hook and pintle hinges large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified & as directed.

S & F Aluminium Anodised Hasp and Staple, including bolt to hing plate and fixed with screws 100 mm size at any storey of building complete in all respect as specified.

S & F in repairs Aluminium body door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851-1000 mm in width & weight between 61 to 80 Kg.

S&F floor door stopper overall length of cover plate 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified & as directed.

Dismantiling of floor hearth or wall tiles incl cement mortar (but not backing), and rubbish off the premises (out of MOD land), complete all as specified and directed.

M&L non-skid joint free ceramic (coloured) tiles 7-8mm thick area of each tiles exeeding 0.18sqm but n.exceeding 0.38 sqm in floor etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified & as directed. Note: Screed bed shall be measured and paid separately

M&L non-skid joint free ceramic (coloured) tiles 7-8mm thick area of each tiles exeeding 0.18sqm but n.exceeding 0.38 sqm in skirting etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified & as directed. Note: Screed bed shall be measured and paid separately

M&L non-skid joint free ceramic (coloured) tiles 7-8mm thick area of each tiles exeeding 0.06sqm but n.exceeding 0.11 sqm in toilet/bath floor etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified & as directed.Note: Screed bed shall be measured and paid separately

M&L for glazed ceramic (coloured) tiles of size 450x350 6-7mm thick as in vertical surface/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for 18 mm to 20 mm thick Marble work shade of Makrana green 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms, border in floor and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match as in borders in floor finish

M&L Screed bed or bedding layer 15 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and directed.

M&L backing coat/Screed bed or bedding layer of mortar 10 mm thick in cement mortar (1:4) as in dado/skirting complete in all respect as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing etc., and making good, cutting not exc 10 cm girth

Taking up or down 15mm bore steel water tubing and connections,including cleaning for removal to store(GI Pipe) complete all as specified and as directed .

Taking up or down 20mm bore steel water tubing and connections,including cleaning for removal to store(GI Pipe) complete all as specified and as directed.

Taking up or down 25mm bore steel water tubing and connections,including cleaning for removal to store(GI Pipe) complete all as specified and as directed.

Taking up or down 40mm or 50mm bore steel water tubing and connections,including cleaning for removal to store(GI Pipe) complete all as specified and as directed.

S&F CPVC pipes 16 mm outer diameter of SDR 11 & plain CPVC SDR 11 fittings as in walls, ceiling, floor, etc. complete all as specified and directed.

S&F CPVC pipes 20 mm outer diameter of SDR 11 & plain CPVC SDR 11 fittings as in walls, ceiling, floor, etc. complete all as specified and directed.

S&F CPVC pipes 25 mm outer diameter of SDR 11 & plain CPVC SDR 11 fittings as in walls, ceiling, floor. etc complete all as specified and directed.

S&F CPVC pipes 40 mm outer diameter of SDR 11 & plain CPVC SDR 11 fittings as in walls, ceiling, floor. etc complete all as specified and directed.

S&F UPVC pipes 50 mm bore (Outer dia) of SCH-40 and plain UPVC SDR 11 fitting fixed on wall or floor, ceiling or laying in floors complete all as directed.

S&F 20 mm bore CPVC Male Brass Threaded Adaptor (MTA/ MBTA) comlete all as specified and directed.

S&F 25 mm bore CPVC Male Brass Threaded Adaptor (MTA/ MBTA) comlete all as specified and directed.

S&F 40 mm bore CPVC Male Brass Threaded Adaptor (MTA/ MBTA) comlete all as specified and directed.

S&F 50 mm bore CPVC Male Brass Threaded Adaptor (MTA/ MBTA) comlete all as specified and directed.

S&F 20mm bore CPVC Female Brass Threaded Adaptor (FTA/ FBTA) comlete all as specified and directed.

S&F 25mm bore CPVC Female Brass Threaded Adaptor (FTA/ FBTA) comlete all as specified and directed.

S&F 40 mm bore CPVC Female Brass Threaded Adaptor (FTA/ FBTA) comlete all as specified and directed.

S&F 50 mm bore CPVC Female Brass Threaded Adaptor (FTA/ FBTA) comlete all as specified and directed.

Dismantling of 100mm cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified & as directed.

S&F 110mm bore PVC(SWR) pipe single socket in any length rubber ring joints complete in all respect as specified and directed.

S&F 110mm dia PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls complete in all respect as specified and directed.

S&F 110mm bore PVC(SWR) pipe bend single socket complete all as specified & as directed.

S&F 110mm PVC (SWR) WC connector bent type complete all as specified & as directed.

S/F in repair PVC (SWR) vent cowl 110 mm dia complete in all respect as specified and directed.

S&F PVC (SWR) 110 mm bore junction single, (Single T) equal or unequal complete in all respect as specified and directed.

S&F PVC (SWR) 110 mm bore junction double, (double T) equal or unequal complete in all respect as specified and directed.

S&F in repairs vitreous china squatting pan of “Orissa” pattern of size 580 mmx 440mm white with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and as directed.

S&F in repairs vitreous China wash down water closet pan ( padestal pattern) incl PVC seat cover , (excluding fixing bolts, flushing cistern and flush pipe) , including connection to drain ( or outgoing pipe) and to flushing pipe etc. comlete all as specified and directed.Make : Prayag or equivelant

Supply PVC valveless, symphonic action type low level flushing cistern white with inlet ball valve, float and handle including brackets, 10 ltr capacity complete with flush pipe(Long bend) 32mm dia of make as approved by GE complete all as specified & directed.

S&F in repairs vitreous china wash hand basin, white, flat back, size 550mm x 400mm, exc chain and plug and porcelain stopper but including cutting for and pinning in ends of and including brackets, waste pipe & PTMT waste coupling of 32mm dia complete all as specified and directed.

S&F half stall Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe comlete all as specified and directed. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

S&F in repairs Brass chromium plated bottle traps of 32 mm bore for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap fixed complete all as specified and directed.

S&F 15mm bore in repairs CP angular valve with crutch handle, screwed for iron pipe or for brass ferrule and fixed of following size comlete all as specified and directed.

S & F 15 mm Dia in repairs CP Bib taps, with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed .

S & F in repairs 15 mm Dia CP stop cock , with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed .

S&F 15 mm bore pillar taps, Chromium Plated, with capstan heads, chromium plated, screwed down for pipe, high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe complete all as specified and directed.

S&F in repairs 50 mm Dia brass gun metal gate valve , with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed .

S&F in repair 15 mm bore Brass CP Health faucet screwed down for iron pipe and fixed all as specified and directed by the Engr in Charge. Make : Prayag/Cera/Jaquar or equivalent

S&F PVC connection 15 mm size pipe with PTMT nut of Length 600mm comlete all as specified and directed.

S&F in repair brass CP Shower roses in repair with or without swivel joints, 125mm size, including fixing to steel pipes or union comlete all as specified and directed.

S&F soap dish, vitreous China white, approximate size 160x 160x90mm fixed to plugs with chromium plated brass screws comlete all as specified and directed.

S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement of 100mm dia comlete all as specified and directed.

S&F PTMT in repair grating of 100mm dia, fixed with cement mortar (1:3) complete all as specified and directed.

S&F in repair brass CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) complete all as specified and directed.

S&F in replacement Curtain rails with Decorative type drappery Rod along with all fittings of 25 mm dia complete all as specfied and directed.

Dismantling of old unserviceable water tank, removing from site, Supply and fixing of rotational moulded polythene water storage tank 1000 litre capacity ISI marked (cylindrical, vertical, double layered with closed top) hoisted and fixed in position including PVC float valve 20mm bore weight not less than 210gms. Complete.

Dismantling of old unserviceable water tank, removing from site, Supply and fixing 2000 Litre capacity rotational moulded polyethylene water storage tanks (multilayer.cylindrical vertical with closed top) with and including 50 mm dia PVC float valve hoisted and fixed in position complete in all respect as specified and directed.

Chipping of unsound /weak concrete materials including cover plaster from RCC structural member i.e. beams, columns,Slab,chajja,fins etc. 50 mm average thickness including tapering all edges, making square shoulders of cavities air and cleaning of exposed concrete surface of lightly picking materials by manual method including foreign materials , loose concrete/aggregate etc and disposal of all debris out side of MOD land and complete all as specified and directed.

Removing of concrete all around reinforcement bar upto 12 mm dia and over from behind the reinforcing bars average 25mm (but not less than 15mm air gap)by manual methods (using wire brushing ,chiselling etc) and applying chloride free rust removing chemical on rusting steel reinforcement bar and removing all rust from steel reinforcement bar by emery paper and cleaning the area throughly by water and allow it to dry and totally rust free of reinforcement bar all as complete as per manufacturer's instruction as specified and as directed. Make( Rust removing chemical ):- Reebaklens RR of FOSROC or quivalents solutions SIKA/STP as approved by GE.

Material , labour and prepared existing reinforcement surface by brush and application two component epoxy zincrich primer on existing reinforcement surface of minimum specific gravity 1.75, adhesive bond strength with steel is 1.50N/mm2 and maximum coverage area 5.00 Sqm per litre complete all as specified and directed.(INCL necessary scaffolding) Make- Nitozinc primer of FOSROC or equivalents.

Material and labour for introducing new reinforcement bars upto 12 mm dia and over for structural connection in RCC beams, columns, lintel and slabs including power drilling holes of appropriate diameters in reinforced or plain cement concrete to a minimum depth of 150mm and upto 200mm including power drilling,fixing the reinforcement in position using epoxy, cleaning of loose dust by blowing air, sealing with epoxy cartridges etc all as specified and directed inluding necessary scaffolding complete all as specified and directed.

Material , labour and placing in position free flow shrinkage cementitious micro concrete of compressive strength, flexural strength shall not be less than 50 MPa at 28 days , 5MPa at 28 days respectively for strengthening of beams, columns & other structural elements of average thickness 50mm and including surface preparation & suitable type formwork etc. as per manufacturers instruction complete all as specified and as directed. Make (micro concrete):-Renderoc RG of FOSROC or equivalents solutions SIKA/STP.

Supply, materials and application of two component structural grade polymer modified reinstatement mortar of compressive strength, flexural strength shall not be less than 45 MPa at 28 days , 7MPa at 28 days respectively (Maximum coverage area 1.3 sqm per 25 kg pack @ 10 mm thickness) over a coat of epoxy Bonding agent on existing surface for strengthening of beams, columns & other structural elements of average thickness 25mm and morter shall be applied in layers n.exc 6mm thick in layers and including surface preparation as per manufacturers instruction complete all as specified and as directed. Note:- This item shall be executed where shuttering is not possible or small patch repairs of structural elements .Make (polymer modified reinstatement mortar):- Renderoc S2 of FOSROC or equivalents solutions SIKA/STP.

Material , labour for applying of high efficiency polymeric resin base film forming curing agent/compound over concrete surface and maximum coverage area 5.00 Sqm per litre as per manufacturers instruction complete all as specified and as directed. (INCL necessary scaffolding) Make:- Concure LP90 of FOSROC or equivalents solutions SIKA/STP/ Maruti / Choksey chemicals.

Dismantling of existing Expansion joint system and M & L applying TPO/FPO based joints sealing membrane, Sikadur Combiflex SG (150x2mm) with epoxy adhesive, Sikadur 31 C ( the joint shall be packed withing polystyrene board before application of Combiflex ). Then providing Sika pllystrene sealant into the gap after proper surface prepration after filling the gap with polyurethene backer rod, followed by precast RCC slab (1:2:4 ) 50 mm thick placed over the joint with minimum 150 mm projection on either side with proper drip course of size (length) n.exc. 1.2 mtr each and sealing the joints of precast RCC slab with exterior grade silicone sealant of size i.e. 10 mmx 10 mm balance with polystrene board complete all as specified and as directed by the Engr -in-Charge.

M&L for hoisting, assembly and fixing of double layer steel scaffolding to external perimeter of building duly cross braced and properly aligned for the functional aspect and safety of the building including dismantling, shifting & removal from site complete all as specified and directed. Note: - Elevational area of the scaffolding facing the building shall be measured for payment.

Supply and Application Cementitious Grouting Admixture with the Cement slurry at a dosage 225 ml per bag of cement and injecting with high pressure by a Pressure grouting Pump through non return PVC nozzles Prefix with rapid setting cementitious Plugging Mortar to fill all possible pores and gaps left within the old concrete mass. When the flow of grout stops or shows refusal or grout flows out from the adjacent nozzle, pumping to be stopped and the nozzle to be tied up and allowed to set for 24 hours. The PVC nozzles to be sealed off with quick-setting cementitious plugging mortar. Grouting operation to be carried out through next nozzle till the entire area is covered. The grouting holes to be finished by removing the protruded portion of nozzles and finishing flush with the surface complete all as specified and directed. ( Make : SIKA/FOSROC/Hindcon)

S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-16 complete all as specified and directed.

M & L for Cement concrete in saucer drains Type B1 1:2:4 (20 mm graded aggregate) slope maintained as per site requirement complete in all respect as specified.

M&L for 75mm thick PCC (1:3:6), type C2, using 40mm graded stone aggte as in plinth protection / paving, surfae finished even & smooth with using extra cement as complete as specified and directed.

M&L sand filling under floor or in floor or paving, laid in including watering and consolidation true surface for laying paver block.

M&L 100mm thick cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base complete all as specified and as directed by the Engr-in-Charge.

M&L 60 mm thick machine pressed precast interlocking paver block any shape and size with grey cement and no pigment confirming to IS 15658-2006 complete all as spd and directed.

M&L for Moorum/red balri filling in floors are paning laid in layer n exc 15cm thick, spread levelled and rammed including watering complete all as specified.

M&L two Coats of Synthetic Enamel Paint over one coat of primer to steel and iron surfaces of any description, not otherwise described including preparation of new or previously untreated surface complete all as specified and directed.

M&L one Coats of Synthetic Enamel Paint to steel and iron surfaces of any description, not otherwise described including preparation of Old painted surfaces surface complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of pink primer area exc.10cm width or girth over new wooden surfaces including preparation of surface complete in all respect as specified and directed.

M&L for complete removal of existing treatment of old decorated wall surfaces by electric sandler machine ; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots. complete all as specified and directed by Engr-in-Charge.

M&L for preparing surfaces decorated plastered or unplastered surfaces of wall, pillasters, cornices etc and applying 1 mm thick wall care putty complete all as specified and as directed.

Material & Labour for two coat of acrylic distemper (white or coloured as per site reqmt) on previously untreated plastered surfaces including preparation of surface, necessary arrangements for scaffolding,trestles,ladders etc necessary for execution of work & protective measures including washing floors, cleaning glass, joinery, electric fittings, wiring etc of drops & splashes and leaving premise, clean and tidy complete all as specified and directed.

M&L for applying Finishing walls in new surfaces with Acrylic Smooth exterior paint of required shade : New work (Two coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete in all respect as specified and directed by the Engr-in-Charge.

M&L for applying Finishing walls in old surfaces with Acrylic Smooth exterior paint of required shade (Two coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) with complete removal of existing paint complete in all respect as specified and directed.

M&L preparation of new plastered surface and applying three coats of white wash on ceiling all complete all as specified and directed.

M&L for preparation of old plastered ceiling surface by complete removal of existing treatment and applying two coat of white wash complete all as specified and directed.

M&L for preparing surfaces new decorated plastered surfaces of wall, pillasters, cornices etc and applying two coat of acrylic distemper with wall care putty complete all as specified and as directed.

Taking down carefully copper/aluminium point wiring complete (light,fan, plug point & power complete alongwith fittings (switches, ceiling roses, tube light fittings, bulk head fitting regulator, sockets main switches, DB removing materials to store & making good of disturb surfaces of wall/floors etc as specified & directed.

M&L for point wiring complete as specified with 1100 V grade with 1.5 Sq mm single core PVC insulated unsheathed FRLS cable, copper conductor multistranded passing through including concealed PVC conduit not essthan 20 mm dia with concealed modular box suitable for logic modular switches , sockets , etc with logic modular white plates, sorroundings of suitable size as required at site with PVC insulated FRLS unsheathed stranded copper conductor of size 1.5 sq mm as earth wire connected to common earth dully as specified complete all as specified and directed for the following:- Note: - (i) Rate quoted shall include for cost of making MS box and concealed in wall including cutting and sinking of boxes and making good to the walls (No extra payment will be made for the same) (ii) Provision of cover plate and blank plates as per site requirement (No extra payment will be made for the same)

One light point / one fan point controlled by one, one way swtich.

All as per item No 125.00 above but for 5 Amp switch socket on the same board.

All as per item No 125.00 above but for 5 Amp switch socket on independent board.

All as per item No 125.00 above but size of cable 4.0 sq mm with earth wire of 4.0 sq mm complete

Al as per item no 125.00 above but for 2 way point wiring with cable of size1.5 sq mm with 1.5 sq mm earth wire suitable for light points at stair case.( Staircase lights).

All as per ser item No. 125.00 here in before but one bell/buzzer point controlled by one push button on the same board with other switches or independent.

Supply and fixing Switch modular type, single pole, one way, 5/6 Amp, one module, completes all as specified and directed. (Make-Legrand cat no-675501 or equivalent make of Havells/anchor wood)

Supply and fixing Switch modular type, single pole, one way, and 15/16 Amps, one module complete all as specified. (Make-Legrand cat no-675501 or equivalent make of Havells/anchor wood)

Supply and fixing socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, two module, modular type completes all as specified and directed. Make-Legrand cat no-675550 or equivalent make of Havells/anchor wood

Supply and fixing socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin 5/6 Amp, modular type completes all as specified and directed. Make-Legrand cat no-675555 or equivalent make of Havells/anchor wood

Supply and fixing Switch modular type, single pole, Bell push, 5/6 Amp, one module, completes all as specified and directed. Make-Legrand cat no-675504 or equivalent make of Havells/anchor wood

Supply and fixing Switch modular type, single pole, 2 way 5/6 Amp, one module, completes all as specified and directed .Make-Legrand cat no-675502 or equivalent make of Havells/anchor wood

Supply and fixing in replacement of bell ding dong type AC, 230 volts, single phase complete all as specified and directed.

Taking down ceiling fans , any type and depositing AGE E/M STORE complete all as specified and directed.

Fixing only ceiling fans complete with blades, complete

Supply and fixing Fan Step Regulator modular type, two module, completes all as specified and directed. Make-Legrand cat no-675531 or equivalent make of Havells/anchor wood

Supply and fixing in replacment of ceiling rose of size 65 x 50 mm surface bakelite 240 Volts three terminal as specified and directed.

Supply and fixing in replacement angle type Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete

Supply and fix LED Lamp 12 Watt all as specifired and directed Make-Havells cat no-LHLDEUEEMC8R012 or equivalent make of Philips/Wipro

Supply & fix LED tube 20 W Tube light fitting LED Batten with square profile and polycarbonate channel alaithium Ion Bettery connecting up with three core flexible copper conductor cable of suitable size from ceiling rose up to 1.5m length complete all as directed

Taking down geyser , any type and Refixing complete all as specified and directed.

Supply and fix MCB DB TPN 4 way IP 43 protection ,double door , concealed on wall complete all as specified . Make : Indo Asian/Legrand /L & T / Standard/ Havell's.

Supply and fix MCB DB SPN double door 08 way , IP 43 protection concealed on wall complete all as specified Make: Make : Indo Asian /Legrand /L & T /Standard/Havell's

Supply and fix MCB DB SPN double door 04 way , IP 43 protection concealed on wall complete all as specified Make : Indo Asian /Legrand /L & T /Standard/Havell's

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning Make : Indo Asian /Legrand /L & T /Standard/Havell's

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning Make : Indo Asian /Legrand /L & T /Standard/Havell's

Supply and fix MCB 63 Amp 4 Pole ,10 KA complete all as specified and as directed Make : Indo Asian /Legrand /L & T /Standard/Havell's

Supply and fix power unit 32 Amps including socket 25 AMp ,06 module metal box box for mounting of power unit complete as specified and directed. (Make : Legrand Cat Part No.6755 58 or equivalent make of Havells/ ABB/ L&T. for Power unit , 6772 32 for socket 25 Amp and 6890 10 for metal box 6 Module )

M & L for submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 6 Sqmm drawn through in and including rigid PVC heavy duty concealed conduits including 6 Sqmm 1100 Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note :- (i) Three runs of cables drawn in conduit will be measured as one length of sub main. (ii) PVC conduit and its accessories is deem to be included in this item rates. (iii) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.

M & L for submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 4 Sqmm drawn through in and including rigid PVC heavy duty concealed conduits including 4 Sqmm 1100 Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note :- (i) Three runs of cables drawn in conduit will be measured as one length of sub main. (ii) PVC conduit and its accessories is deem to be included in this item rates. (iii) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.

Supply & fixing bldg security lighting of LED 35 watts high efficennt lighting solution anodised with heat resistance with accessories provided including necessary electric connection with all accessories required for fixing/mounting with nut bolt washer & clamp support on GI pipe1.5 meters of suitable diameter(as required at site) complete all as specified and as directed. (Make Havells Cat No:ENDURAOMNIPLUSSL35WLED765PASYBOPCor equivalent make of Philips/Crompton.)

Material & Labour in replacement of Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.3 mm thickness burried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to and incl galvanised earth lead wire of 4.00 mm dia by means of nuts & bolts, check nuts and washers of galvanised incl PCC pit of 1:2:4 type B-1, cover reinforced with XPM weight not less than 4 Kg/Sqm and 6mm dia bar handle, earth pit angle iron frame of size 25mm x 25mm, excavation and earth work in any type of soil, charcoal dust, salt, light grade GI watering pipe 20mm dia with funnel and wire -mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distribution board complete all to as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected main switch board all as specified and testing on completion.

Supply and install hi wall split air conditioner comprising of indoor and outdoor units complete with cordless remote control unit and in-built air ioniser and plasma filter for better indoor air quality with minimum 3 star rating of capacity 1.5 TR including copper tube upto 10 ft, electrical connection and heat insulated copper refrigerant tubing from outdoor to indoor unit all as apecified and as directed. Make : LG/DAIKIN/HITACHI

Material and labour for framed brackets of angles or tees fixing of outdoor unit of split air conditioner including drilling, rivetting, welding as necessary and painting with one coat of red oxide primer and two coats of synthetic enamel paint all as specified and as directed.

M & L for submain wiring with two run of 4.0 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multistranded copper conductor single core cable drewn through existing PVC conduit on walls, floors and ceilings complete including one run of FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 4.0 Sqmm green in colour as earth continuity conductor connected to common earth and earth dolly all as specified and as directed.

M & L for coppertube 5/8" including jointing with existing copper tube for installation of outdoor unit of split AC all as specified and as directed.

M & L for copper tube 3/8" including jointing with existing copper tube for installation of outdoor unit of split AC all as specified and as directed.

M & L for Modular type mini MCB SP 3 kA 'C' series suitable for fixing in Modular Switch boaed, make: Crabtree or equivalent in other approved make all as specified and as directed.

M & L for MCB protected power unitfor Air conditioner with MCB double pole 16-25 Amp,Starter unit 16-25 Amp and socket 16-25 Amp with plug top Cat No:DHDUCDP0253016-25 of make : Havells or equivalent in Anchor .C&S and L&T all as specified and as directed.

S & F Modular Socket 6A/16A - 2/3 pin combined 2 module in existing metal flush box

S & F Modular white cover plate with frame of 4 module in existing metal flush box

S & F Modular white cover plate with frame of 2 module in existing metal flush box

Material and Labour for Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of + 2.5% and of capacity 3.0 KVA . Make V Guard

SENCO

DIPAK ENTERPRISE

R.R.ENTERPRISE

BENGAL TRADERS

DILIP CONSTRUCTION

ESS PEE UDYOG

M/s Santosh Industrial Corporation