PROVISION OF DEFICIENT SINGLE LIVING ACCOMMODATION FOR EPS AT ICGS OKHA

Amount

SCHEDULE "A" Part - I (BUILDING WORKS) Details of prepriced schedule is given in tender documents.

SCHEDULE "A" PART-II ( EARTH WORK AND SITE CLEARENCE) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-III (INTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-IV (INTERNAL ELECTRIFICATION) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-V (ROAD/PATH/CULVERT) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VI (SEWAGE DISPOSAL) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VII (AREA DRAINAGE) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VIII (EXTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-IX (EXTERNAL ELECTRIFICATION) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-X (REFRIGERATION AND AIR CONDITIONING) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-XI (SOLAR WATER HEATER) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART -XII (MISCELLANIOUS ITEMS) Note:- This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col.' E ' signifies this fact only.

INTERNAL WATER SUPPLY S & F Two way bib tap 15 mm Make – Drizzel or equivalent

INTERNAL ELECTRIC SUPPLY S & F modular type bell ding dong of 2 module size, conforming to IS: 8884- 1978 complete all as specified and directed. Make: Legrand Arteor Cat-Part No. 5734 43 or equivalent model of ABB (snieo) / L&T (Entice) / Wipro

S & F modular type 1 module TV socket complete all as specified and directed. Make: Legrand Arteor Cat-Part No. 5734 25 or equivalent model of Precision

S & F 20 W surface/wall mounted LED batten having high efficiency long life LED chips with luminous efficacy of > 100 lumen/W, independent isolated SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing and white coloured ABS end caps having input voltage 220- 240 V, input frequency 50- 60 Hz, PF > 0.95, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. Make: BAJAJ Cat-Part No. 112785 BCLAB 20W or equivalent model of Havells, Philips or Wipro

S&F 10W surface/ wall mounted LED batten light having high efficiency long light LED chips with luminious efficiency of >100lumen/W, Independent isolated SMPS based constant current electronic LED driver with TSD<20%, Surge voltage protection and other safety test as per IS:15885(part 2/ sec 13:2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing and white coloured ABS end caps having input voltage 220V-240VC, input Frequency 50-60Hz, PF>0.945, including electrical connection with 2 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. Make:Bajaj cat part No: 112785 BCLAB 20W or Equivalent model of Phillips/Havells/ Wipro

S&F LED street light 25W, lumen output not less than 2500 lumens high pressure die cast aluminium housing 140/270V, 50Hz, PF>0.90, including 1.2Mtr long 40/50mm bore light grade GI pipe mounting bracket made to shape with and including MS clamp of FI 40mmX6mm with bolts,nuts,washers and conductors to fitting with 3 core 1sqmm PVC insulated copper cable from control box to fitting complete all as specified.NOTE:The quoted unit rate deemed include for painting to clamps with one coat of red oxide paint before fixing. Complete all as specified and directed by Engineer-in-Charge.Make:-Wipro Cat No: LR02-291-xxx-57xx/GE Cat No: PALM-MIN or equivalent in Phillips

S & F BEE five star rated energy efficient high-speed ceiling fan having 1200 mm blade sweep, air-flow not less than 210 CMM, operating voltage 220-240 V and frequency 50 Hz, including a downroad of suitable size and electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fan complete all as specified and directed. Make: Crompton Cat-Part No. ENTRUST50 or Havells Cat- Part No. ES-50 or equivalent model of Usha or BAJAJ

S & F energy efficient non-metalic fresh air fan having blade sweep 250 mm, air delivery not less than 900 CMH, operating voltage 220-240 V and frequency 50 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fresh-air fan complete all as specified and directed. Make: Crompton Cat-Part No. VENTILUS 10" or equivalent model of Usha, Havells or BAJAJ

S&F DB VTPN, 4Way, Double Door, IP43 protection with connected accessories like insulated bus bars, insulated IP2X neutral bars and earth Bars, blanking plates, cable management kit, incoming as MCCB and outgoing SP/TP MCB all as specified and directed.

S & F ISI marked MCB for AC applications till 63 A, having breaking capacity Icn = 10 kA, conforming to IS/IEC 60898-1-2002, sliding bottom clamp, colour coded on/off indication on dolly, biconnect IP 20 protected lower terminals and sliding shutters, all complete as specified and directed. Make: Schneider, Legrand, Havells (a) 6 A, SP MCB, C- curve

(b) 16 A, SP MCB, C- curve

(c) 20 A, SP MCB, C- curve

(d) 32 A, SP MCB, C- curve

(e) 16-32 A, SPN MCB, C- curve

S & F MCCB of 63 A, 25 kA, 04 pole all as specified and directed. Make: Schneider, Legrand, Havells

M&L for earthing complete with galvanized steel earth plate electrode including necessary excavation and earth work in any type of soil with galvanized steel earth plate electrode size 60cmX60cmX6mm thick buried directly in ground(Earth pit not less than 2.25m below ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to galvanized earth strip 25X 4mm as earth lead by means of bolt nuts, check nuts and washers of galvanized iron or steel all as shown in electric plate no.3 of MES SSR PART I connected to main switch board or main control board all as specified and testing on completion including provision of earth strip protected by galvanized iron 40mm dia. Light grade pipe and watering pipe shall be 20mm bore medium grade PCC pit with pre cast RCC cover,charcoal/salt funnel etc. complete all as directed NOTE:1) The concrete pit shall be PCC 1:3:6 tye C-140-40mm thick pre-cast cover slab of RCC(1:2:4) type B-1 using 20mm graded stone aggregate enforced with 8mm TMT bar@ 10cm C/C on both sides with suitable casts iron handle shall be provided in lieu of cast iron cover shown in electrical plate no. 3 of MES SSR PART I 2) Item includes the cost of 7.5m GI pipe for protection of earth strip. 3) PCC pit shall be provided atleast 500mm away from the pit and not on the earth pit itself and extra cost of additional length of watering pipe, bends, elbows etc. shall be deemed to be included in the quote rate. 4) Item includes the cost of 7.5m length of earth strip.

EXTERNAL ELECTRIFICATION Supply and lay double wall corrugated (DWC) high density polythene pipes having corrugation on the outer wall and plain surface on the inner wall confirming to ISI 14930 ( Part I & II ), size 63mm outer dia for protection of UG cable, with all fittings laid in trenches / road / nallah or fixed along wall. poles or laid under floor including road cutting & making good, complete all as specified and as directed by Engg in Charge (excavation and earth work shall be measured and paid seperately) Make : Rex/Poly/Gemini or equivalent.

M & L for earthing complete with galvanized steel earth plate electrode size 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs below ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanized earth strip 32x6 mm by means of bolts nuts check nuts and washers of galvanized iron including 40mm bore GI pipe medium grade up to 7.5 m long all as shown in electrical plate No. 3 of MES SSR Part-1, 2009 and as specified or indicated and testing on completion including excavation/ earth work in any type of strata, PCC (1:3:6) type C1 earthing chamber, precast RCC slab 50 mm thick in reinforced cement concrete (1:2:4) type B1 reinforced with welded steel wire fabric (XPM weight not less than 4Kg/Sqm) cast iron frame funnel with wiremesh 20mm bore medium grade GI watering pipe lugs 40mm bore medium grade GI protection pipe test point etc complete all as specified and directed by Engg-in-charge NOTE: (1) item includes the cost of 7.5 m GI pipe for protection of earth lead any additional in length shall be adjusted through deviation order. (2) item includes the cost of 7.5 mtr Gl earth lead. any additional in length shall be measured and paid under respective item of this schedule.

M&L for LT Panel Board cubical KIOSK, Outdoor type, 415Volts AC 50Hz 4 wire + E fabricated Polycarbonate Nominal size 900mm x600mm x 660mm RAL 7035 finish conferming to IP 54 complete including copper bus bar 100Amps 4 strip mounted on porcelain insulted a& inclosed in chamber bottom cable entry comprising of following :- (a) Incoming MCCB 63 Amps four pole with microprocessor based release braking capacity 35KA - 01No. (b) Outgoing SP MCB 16 AMPS,10KA 230V -12NOS (c) Indicating lamps set RYB 01 set. (d) Energy Meter, AC single phase of accuracy class 1.0, 240V, 50Hz with backlit LCD display of rating 5 - 30A (measures and displays KWH, V, Current I, KW, pf last month history of KWH, MD in KW) with special features like TOD, temper logging, optical communication port display in absence of power with transparent hinge type box - 12 Nos. Make Secure/ L&T / HPL

REFRIGERATION AND AIR CONDITIONING Supply and fix voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 140V to 280V, with output voltage stabilized at 230 Volt with accuracy of +/- 2.5% and of capacity 1.0 KVA. Make: V-Guard/Volina/AE/ Aplab.

SOLAR WATER HEATER Supply, installation & testing Solar Water heating system of cap 200 LPD consisting of flat plate collector box fabricated from aluminium extruded sections by means of gas welding or brazing leak proof fully insulated with glass wool (48Kg/M3) with supporting structure duly painted with synthetic enamel black paint over a coat of zinc chromate red oxide primer provided with absorber made from copper sheet & copper tubes with protective coating complete with header grommet, storage tank made from stainless steel sheet of minimum 20 SWG thickness with puff insulation of minimum 50 mm girth outer including of brass socket & nipple fully insulated with glass wool with cold & hot water piping, gun metal valves, coil type stainless steel heat exchanger complete conforming to IS-12933 & 12976 with necessary wiring fixed on PCC platform, cold water tank & make up water tank capacity 200 Litresper day capable to supply hot water at 60°C all as specified and directed Make :- SINTEX/BHEL/TATA /BP SOLAR INDIA LIMITED/Honey well/Bosch/Racold Notes: (i) The system will be provided with electric back up 2KW for 100 litre capacity solar water heating system. (ii) The hot water pipe shall be 20mm KITEC (PE-AL-PE) and its cost up to 5.00 RM shall be deemed to be included in rates quoted against respective item. (iii) The thickness of stainless steel sheet of storage tank will be 20 gauge.

SANKALP ENTERPRISE

Nitesh Enterprise